On the initial stage of the free-radical polymerizations of styrene and methyl methacrylate in the presence of fullerene C<Subscript>60</Subscript>

It has been demonstrated experimentally and theoretically that the essentially different inhibiting effects of fullerene C₆₀ on the initial stage of the polymerizations of styrene and methyl methacrylate (including complete hampering of styrene polymerization throughout a long induction period) are of common kinetic nature. The difference arises from the competition between C₆₀ and the monomer not for initiating radicals but for radicals originating from the monomer; that is, the difference stems from the competition between the chain propagation reactions and the termination reactions on fullerene molecules. As a consequence, the further development of the process is determined by the relative reactivities of the radicals toward C₆₀ and towards their parent monomers.     

Reactions of fullerene C60 with methyl methacrylate radicals: A density functional theory study

We have investigated the stepwise addition of four growing methyl methacrylate (MMA) radicals to C₆₀ fullerene, taking into account all possible types of the formed adducts. This reaction set is a reliable approximation for understanding the MMA polymerization process in the presence of C₆₀ fullerene. We have analyzed the structures of the fullerene-MMA adducts and energy parameters of their formation (heat effects and activation enthalpies). We found that up to three MMA growing radicals are favorably attached to C₆₀ as the fullerene-MMA trisadduct is a stable radical of the allyl type. It is inactive for further radical addition, and the elimination of the hydrogen atom from the growing MMA radical becomes preferable. The effects of steric factors and structures of the products of multiple growing MMA radical additions to C₆₀ on the radical polymerization of MMA in the presence of C₆₀ fullerene are considered.     

η5-cyclopentadienyl-η2-styrenedicarbonylmanganese for initiation of free-radical polymerization of vinyl monomers

The polymerization of styrene, methyl methacrylate, and vinyl chloride catalyzed by η⁵-cyclopentadienyl-η²-styrenedicarbonylmanganese is studied. It is shown that the cyclopentadienyl complex of manganese containing the monomer ligand (styrene) in the coordination sphere can initiate the radical polymerization of vinyl monomers in a mild temperature range. On the basis of the experimental data and the quantum-chemical simulation of the initial stages of the process, schemes describing the initiation of polymerization under the action of the complex under study and the binary initiating system containing carbon tetrachloride are advanced. In the latter case, additional acceleration of the reaction is related to the interaction of carbon tetrachloride with the triplet form of the manganese complex that yields trichloromethyl radicals initiating polymerization.     

Interaction of fullerene C60 with allylbenzene and allyl chloride

The reaction between allyl compounds and fullerene C₆₀ has been investigated via dilatometry under the conditions of free-radical polymerization. It has been shown that the rate of a variation in the volume of the reaction mixture plotted versus the concentration of fullerene C₆₀ is described by a curve with a minimum. It has been established that, in the presence of fullerene and the allyl monomer, the polymerization of methyl methacrylate proceeds without any induction period. It has been concluded that allyl radicals interact with fullerene C₆₀.     

Quantum chemical modeling of the addition reactions of 1‐n‐phenylpropyl radicals to C60 fullerene

Modeling of the addition of various radicals to C₆₀ fullerene is currently an active research area. However, the radicals considered are not able to adequately model polymeric radicals. In this work, we have performed a theoretical study of the possible reactions of C₆₀ fullerene with 1‐n‐phenylpropyl radicals, which are used to model polystyrene radicals. Several possible ways of subsequent addition of up to four 1‐phenylpropyl radicals to C₆₀ have been analyzed, the structures of the intermediates have been defined and thermal properties, such as the activation enthalpies of the corresponding reactions, have been calculated using density functional theory with the approximation of PBE/3z. It is shown that the topology of the spin density distribution on the fullerenyl radical causes regioselectivity for further radical addition. According to the energetic characteristics of the reactions, we assume the possibility of formation of products of one‐, two‐, three‐, and four‐ addition of the growth radical to the fullerene core in radical polymerization of styrene in the presence of C₆₀ fullerene. © 2016 Wiley Periodicals, Inc.     

Retardation of radical polymerization by phenylacetylene and its p-substituted derivatives

Radical polymerizations of styrene and methyl methacrylate in the presence of phenylacetylene and five of its p-substituted derivatives were carried out with the use of 2,2′-azobisisobutyronitrile as the initiator at 60°C. The initial overall rates of the polymerizations of styrene and methyl methacrylate in the presence of phenylacetylene were not proportional to the square root of the initiator concentration under the experimental conditions employed. The relationship between the overall polymerization rate and the concentration of the phenylacetylenes could be expressed by the Kice equation for the rate of a radical polymerization in the presence of a terminator. From this relationship the rate constant (k_s) of the reaction of a growing polymer radical with the phenylacetylenes and the constant C_s = (k_s/k_p), where k_p is the propagation rate constant of vinyl monomers, were determined. The C_s value thus obtained agree well with that derived from the relationship between the number-average degree of polymerization and the molar ratio of the phenylacetylenes to the vinyl monomer. Therefore the mechanism of the reaction may be considered as being one in which the growing radical reacts with the ethynyl group of the phenylacetylenes to yield a comparatively stable radical which terminates mainly by reaction with the growing radical, and so apparently the phenylacetylenes retard the vinyl polymerization. The substituent effects on the reaction were discussed on the basis of the following modified Hammett equation proposed by Yamamoto and Otsu: log [C_s(p-sub. PA)/C_s(PA)] = ρσ + γE_R where PA represents phenylacetylene, σ and E_R are the Hammett polar substituent constant and resonance substituent constant, respectively, and both ρ and γ are reaction constants. The γ value for the polymerization of both styrene and methyl methacrylate was 1.7. The ρ value was 1.0 for the polymerization of styrene and approximately zero for that of methyl methacrylate. These results demonstrate that the reactivity of the phenylacetylenes with the growing chain is influenced by both polar and resonance effects of their p-substituents in the degradative copolymerization of styrene and only by the resonance effect in that of methyl methacrylate.     

Branched poly(methyl methacrylates) modified by C60 fullerenes

The poly(methyl methacrylates) of branched structure with a covalently bonded fullerene were synthesized by three-dimensional radical polymerization of methyl methacrylate with triethylene glycol dimethacrylate or allyl methacrylate in toluene containing C₆₀. The kinetics of copolymerization of methyl methacrylate with multifunctional co-monomers in the absence of fullerene is compared with that in its presence. The physicochemical characteristics and thermal stability of the obtained copolymers are also compared. The electron spin resonance (ESR) method was applied to study the kinetics of accumulation of the fullerene radicals in the course of the (co)polymerization of methyl methacrylate.     

Methyl methacrylate polymerization in the presence of C60 (C70) and molecular characteristics of fullerene-containing poly(methyl methacrylate)

Kinetics was studied of bulk polymerization of methyl methacrylate initiated by dicyclohexyl peroxydicarbonate in the presence of tri-n-butylborane and fullerene C₆₀ (or C₇₀) at variable ratio initiator: fullerene. The deceleration of the polymerization in the first stage of the reaction (below 10% conversion) was established by dilatometric method that depended on the fullerene concentration and the mode of its addition to the monomer. It was shown that at similar ratios initiator: fullerene the C₆₀ inhibited the polymerization process considerably stronger than C₇₀. The gel-permeation chromatography revealed the widening of the molecular weight distribution of the poly(methyl methacrylates) containing C₆₀ or C₇₀ compared to its analog synthesized under the same conditions without fullerene. It was established that in the fullerene-containing poly(methyl methacrylates) all the framework nanospecies are linked by covalent bonds and are mostly accumulated in the low-molecular fractions. The effect of the covalently bound fullerene on the molecular characteristics of polymers were investigated by translational isothermal diffusion, high-speed sedimentation, and viscometry     

Solvent effect on the kinetics of the free-radical polymerization of styrene in the presence of fullerene C60

The induction period in the kinetic curves of styrene polymerization in the presence of fullerene C₆₀ was found to increase significantly at a solvent (benzene, toluene, ortho-dichlorobenzene, CCl₄) concentration of ≥50 mol %. The free-radical polymerization rates of styrene in the presence of fullerene C₆₀ and solvents, the ratio of chain propagation and termination rate constants k _p /k ₀ ^1/2 , and the stoichiometric inhibition coefficient were determined.     

Metallocene catalysis in the complex-radical polymerization of methyl methacrylate

The initiation stage of methyl methacrylate polymerization in the presence of benzoyl peroxide-metallocene (MC) systems is considered, with MC = Cp₂Fe, (C₅Me₅)₂Fe, (AcC₅H₄)(C₅H₅)Fe, Cp₂TiCl₂, Cp₂ZrCl₂, and (C₅Me₅)₂ZrCl₂. The decomposition of benzoyl peroxide in the presence of a metallocene proceeds via the formation of its complex with the metallocene. The catalytic effect of the metallocenes on the initiation of methyl methacrylate polymerization is due to the formation of a metallocene-benzoyl peroxide complex and its decomposition yielding primary radicals. The chain propagation stage is metallocene-dependent, which is explained by the formation of complex sites. Their formation pathway and structures are analyzed using quantum-chemical calculations.     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). V. Kinetics of initial template polymerization

The influence of stereoregular poly(methyl methacrylate) (PMMA) as a polymer matrix on the initial rate of radical polymerization of methyl methacrylate (MMA) has been measured between ?11 and +60°C using a dilatometric technique. Under proper conditions an increase in the relative initial rate of template polymerization with respect to a blank polymerization was observed. Viscometric studies showed that the observed effect could be related to the extent of complex formation between the polymer matrix and the growing chain radical. The initial rate was dependent on tacticity and molecular weight of the matrix polymer, solvent type and polymerization temperature. The accelerating effect was most pronounced (a fivefold increase in rate) at the lowest polymerization temperature with the highest molecular weight isotactic PMMA as a matrix in a solvent like dimethylformamide (DMF), which is known to be a good medium for complex formation between isotactic and syndiotactic PMMA. The acceleration of the polymerization below 25°C appeared to be accompanied by a large decrease in the overall energy and entropy of activation. It is suggested that the observed template effects are mainly due to the stereoselection in the propagation step (lower activation entropy Δ S_p^?) and the hindrance of segmental diffusion in the termination step (higher activation energy Δ E_t^?) of complexed growing chain radicals.     

Anionic copolymerization of [60]fullerene with styrene initiated by sodium naphthalene

The novel C₆₀–styrene copolymers with different C₆₀ contents were prepared in sodium naphthalene-initiated anionic polymerization reactions. Like the pure polystyrene, these copolymers exhibited the high solvency in many common organic solvents, even for the copolymer with high C₆₀ content. In the polymerization process of C₆₀ with styrene an important side reaction, i.e., reaction of C₆₀ with sodium naphthalene, would occur simultaneously, whereas crosslinking reaction may be negligible. ¹³C-NMR results provided an evidence that C₆₀ was incorporated covalently into the polystyrene backbone. In contrast to pure polystyrene, the TGA spectrum of copolymer containing ∼ 13% of C₆₀ shows two plateaus. The polystyrene chain segment in copolymer decomposed first at 300–400°C. Then the fullerene units reptured from the corresponding polystyrene fragments attached directly to the C₆₀ cores at 500–638°C. XRD evidence indicates that the degree of order of polymers increases with the fullerene content increased in terms of crystallography. Incorporation of C₆₀ into polystyrene results in the formation of new crystal gratings or crystallization phases. In addition, it was also found that [60]fullerene and its polyanion salts [C₆₀ⁿ⁻(M⁺)_n, M = Li, Na] cannot be used to initiate the anionic polymerization of some monomers such as acrylonitrile and styrene, etc.© 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2653–2663, 1998     

Reactivity of fullerene C<Subscript>60</Subscript>

The results of a quantum-chemical study of the reactivity of fullerene C₆₀ in such reactions as polymerization (dimerization), cycloaddition, addition of valence-saturated molecules are presented. The mechanisms of these reactions are also discussed.     

ESR studies of the radiation-induced multiple graft polymerization

The radiation-induced multiple-graft polymerization was studied by an ESR method. When methyl methacrylate vapor was introduced onto preirradiated polyethylene already grafted with styrene, the second step of grafting of methyl methacrylate occurred mainly in the polyethylene portion. The kinetic treatment proved that the termination rate constant k_t of methyl methacrylate decreased with the amount of styrene grafted in advance. On the other hand, when styrene vapor was introduced onto polyethylene grafted with methyl methacrylate, only radicals of poly(methyl methacrylate) decreased. In this case, the second step of grafting of styrene occurred in the poly-(methyl methacrylate) portion which covered the whole surface of the polyethylene powder. When monomer vapors were alternately introduced onto preirradiated polyethylene powder, the second step of grafting occurred at the growing chain end of the first monomer.     

Kinetic and ESR studies on radical polymerization of methyl methacrylate in the presence of fullerene

The effect of fullerene (C₆₀) on the radical polymerization of methyl methacrylate (MMA) in benzene was studied kinetically and by means of ESR, where dimethyl 2,2′-azobis(isobutyrate) (MAIB) was used as initiator. The polymerization rate (R_p) and the molecular weight of resulting poly(MMA) decreased with increasing C₆₀ concentration ((0–2.11) × 10⁻⁴ mol/L). The molecular weight of polymer tended to increase with time at higher C₆₀ concentrations. R_p at 50°C in the presence of C₆₀ (7.0 × 10⁻⁵ mol/L) was expressed by R_p = k[MAIB]^0.5[MMA]^1.25. The overall activation energy of polymerization at 7.0 × 10⁻⁵ mol/L of C₆₀ concentration was calculated to be 23.2 kcal/mol. Persistent fullerene radicals were observed by ESR in the polymerization system. The concentration of fullerene radicals was found to increase linearly with time and then be saturated. The rate of fullerene radical formation increased with MAIB concentration. Thermal polymerization of styrene (St) in the presence of resulting poly(MMA) seemed to yield a starlike copolymer carrying poly(MMA) and poly(St) arms. The results (r₁ = 0.53, r₂ = 0.56) of copolymerization of MMA and St with MAIB at 60°C in the presence of C₆₀ (7.15 × 10⁻⁵ mol/L) were similar to those (r₁ = 0.46, r₂ = 0.52) in the absence of C₆₀. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2905–2912, 1998     

Chain transfer by addition–substitution–fragmentation mechanism. I. End–functional polymers by a single-step free radical transfer reaction: Use of a new allylic linear peroxyketal

A new chain transfer agent, ethyl 2-[1-(1-n-butoxyethylperoxy) ethyl] propenoate (EBEPEP) was used in the free radical polymerization of methyl methacrylate (MMA), styrene (St), and butyl acrylate (BA) to produce end-functional polymers by a radical addition–substitution–fragmentation mechanism. The chain transfer constants (C_tr) for EBEPEP in the three monomers polymerization at 60°C were determined from measurements of the degrees of polymerization. The C_tr were determined to be 0.086, 0.91, and 0.63 in MMA, St, and BA, respectively. EBEPEP behaves nearly as an “azeotropic” transfer agent for styrene at 60°C. The activation energy, E_atr, for the chain transfer reaction of EBEPEP with PMMA radicals was determined to be 29.5 kJ/mol. Thermal stability of peroxyketal EBEPEP in the polymerization medium was estimated from the DSC measurements of the activation energy, E_ath = 133.5 kJ/mol, and the rate constants, k_th, of the thermolysis to various temperature. © 1994 John Wiley & Sons, Inc.     

Copolymerization of Fullerene (C60) and Methyl Methacrylate (MMA) using Triphenylbismuthonium Ylide as a Novel Initiator and Characterization of the Copolymers (C60-MMA)

Copolymerization of fullerene (C₆₀) with methyl methacrylate (MMA) was carried out using triphenylbismuthonium ylide (abbreviated as Ylide) as a novel initiator in dioxan at 60°C for 4 h in a dilatometer under a nitrogen atmosphere. The reaction follows ideal kinetics: R_p∝ [Ylide]^0.5[C₆₀]^?1.0[MMA]^1.0. The rate of polymerization increases with an increase in concentration of initiator and MMA. However, it decreases with increasing concentration of fullerene due to the radical scavenging effect of fullerene. The overall activation energy of copolymerization was estimated to be 57 KJ mol^?1. The fullerene-MMA copolymers (C₆₀-MMA) were characterized by FTIR, UV–Vis, NMR and GPC analyses.     

Copolymerization of diallyl isophthalate with methyl methacrylate and styrene in the presence of C60 fullerene

The involvement of fullerene in the radical copolymerization of diallyl isophthalate with methyl methacrylate or styrene results in a change in the relative activity of monomers owing to the interaction of C₆₀ with the allyl radical yielding a “quo;new,”quo; more active radical. This corresponds to the transition from degradative chain transfer to effective transfer to the allyl compound. It is of great importance that, at an amount of diallyl isophthalate in the monomer mixture of up to 10 mol %, C₆₀ fullerene is almost completely incorporated into macromolecules.     

Mechanisms of propagation,transfer, and short-chain branching reactions in the free-radical polymerization of ethylene

The propagation, transfer, and short-chain branching reactions in the free-radical polymerization of ethylene were studied at temperatures of 20–80°C. under pressures of 160–400 kg. cm.² by means of two-stage polymerization with the use of a specially designed reaction vessel. In the first stage, the polymerization was carried out in the presence of AIBN as the initiator, and in the second stage, the propagation occurred with living radicals in the absence of the initiator. In the second stage the polymer yield is shown to increase with reaction temperature and pressure, and the molecular weight of the polymer reached constant values which were dependent upon the temperature when the contribution of the polymer formed in the first stage was very small. It is shown that in the second stage the rate of propagation, transfer, and short-chain branching are all proportional to the second power of ethylene fugacity, and that the activation energies of these reactions are 5.7, 23.4, and 10.9 kcal./mole, respectively. The polymer has no terminal vinyl group. The mechanism of these reactions is discussed on the basis of kinetic and energetic results.     

Inertness of C<Subscript>60</Subscript> fullerene toward RO<Subscript>2</Subscript><Superscript>·</Superscript> peroxy radicals

The reactivity of fullerene C₆₀ toward peroxy radicals RO₂ ^· was tested by the chemiluminescence method. A comparison of the influence of C₆₀ and known inhibitors on the kinetics of liquid-phase chemiluminescence (CL) during oxidation of a series of hydrocarbons (ethyl-benzene, cyclohexane, n-dodecane, and oleic acid) shows that the fullerene does not react with the RO₂ ^· radicals. A sharp decrease in the CL intensity observed upon C₆₀ addition is caused by the quenching of CL emitters with fullerene but not by inhibition of hydrocarbon oxidation. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1808–1811, August, 2005.