Enhanced head-to-head photodimers in the photocyclodimerization of anthracenecarboxylic acid with a cationic pillar[6]arene

The complexation behaviors of anthracenecarboxylic acid and water-soluble cationic pillararenes have been investigated by ¹H NMR, UV-vis and ITC methods. The cationic pillar[6]arene was found to stepwise form 1:1 and 1:2 complexes, having a large K₁ and a relatively small K₂ values. Photocyclodimerization of AC within the pillar[6]arene improved the yield of the head-to-head photodimers. Up to 4.97 HH/HT ratio has been reached by optimizing the reaction conditions.     

Synthesis and characterization of bis-[1]rotaxanes via salen-bridged bis-pillar[5]arenes

The series of salen-bridged bis-pillar[1]arenes were conveniently prepared by condensation reaction of5,5'-methylenebis(2-hydroxybenzalde hyde)or 5,5'-(propane-2,2-diyl)bis(2-hydroxybenzaldehyde)with mono-amido-functionalized pillar[5]arenes containing different terminal aminoalkyl groups in refluxing ethanol.The^1H NMR and 2D-NOESY spectra indicated that the salen-bridged bis-pillar[5]arenes with longer allcylene linker(n=3,4,6)formed the fascinating bis-[1]rotaxanes,while the salenbridged bis-pillar[5]arenes with short hydrazine and ethylenediamino linker(n=0,2)predominately existed in free form.The single crystal structure of the bis-pillar[5]are ne ambiguously indicated that two propylenediamino linker inserted in to two cavities of pillar[5]arene to form a novel bis-[1]rotaxanes.     

Construction of [1]rotaxanes with pillar[5]arene as the wheel and terpyridine as the stopper

The condensation reaction ofω-aminoalkyleneamide-functionalized pillar[5]arenes with 2-(4-([2,2’:6’,2〃-terpyridin]-4’-yl)phenoxy)acetic acid or 4-(4-([2,2’:6’,2"-terpyridin]-4’-yl)phenoxy)butanoic acid in dry chloroform at room temperature under the catalysis of HOBT/EDCl resulted in novel pillar[5]arene diamido-bridged terpyridine derivatives.~1 H NMR and 2 D NOESY spectra clearly indicated that the interesting[1]rotaxanes were formed by longer alkylene such as propylene,butylene and hexylenediamido chains threading into the cavity of the pillar[5]arene and with larger terpyridine acting as the stopper.However,the shorter ethylenediamido chain only exists outer of cavity of pillar[5]arene and the molecule exist on free form.     

Pillar[5]arene-based [3]rotaxanes: Convenient construction via multicomponent reaction and pH responsive self-assembly in water

Four pillar[5]arene based [3]rotaxanes(1-4) involving two 1,4-diethoxypillar[5]arene(DEP5) rings and a dumbbell-shaped component were successfully synthesized.The dumbbell-shape molecules contain one longer bridge,two triazole sites and two multicomponent stoppers.After threading DEP5 rings with linear guests(G1-G4) which contain two benzaldehyde units,the base catalyzed three-component reaction of dimedone,malononitrile and benzaldehyde was performed to construct the stoppers and connected the pseudorotaxanes with stoppers to generate 1-4.The structures of [3]rotaxanes and their self-assembly behaviors were characterized by ~1 H NMR,~(13)C NMR,NOESY,HR-ESI-MS,DLS and TEM technologies.We hope that pillar[5]arene based [3]rotaxanes may have potential applications in drug delivery systems and molecular devices.     

三桥联杯[6]酰腙衍生物和相关化合物的合成

以杯[6]芳烃和杯[6]-1,4-冠-4为起始原料,经过醚化引入酯基,接着用水合肼肼解得到杯[6]酰肼衍生物2和6,然后再与水杨醛进行缩合反应,高产率合成了两例杯[6]酰腙衍生物3和7.化合物6与2倍的二水杨醛乙二醚进行"1+2"缩合反应,得到了一例新型结构的杯[6]-1,4-2,6-3,5-三桥联酰腙衍生物8,产率73%.新化合物2,3,6,7和8的结构经元素分析、红外光谱、质谱、核磁共振谱等证实.     

Monofunctionalized pillar[5]arene-based stable [1]pseudorotaxane

A new monofunctionalized pillar[5]arene bearing imidazolium moiety that formed stable [1]pseudorotaxane even at high concentration (100 mmol/L) was reported. [1]Rotaxane was obtained effi ciently through thiol-ene reaction from [1]pseudorotaxane which further confi rmed the formation of [1]pseudorotaxane.     

Construction and investigation of photo-switch property of azobenzene-bridged pillar[5]arene-based [3]rotaxanes

Series of azobenzene-bridged pillar[5]arene-based [3]rotaxanes with different alkyl chain length of guest molecules were constructed by threading-endcapping method with alkylenetriazole as axile and tetrahydrochromene as endcapping group.The encapsulation of pillar[5]arenes were proved by highresolution mass,¹ H NMR and NOESY spectra.The photo-responsive property were examined by irradiation of the synthesized [3]rotaxanes with 365 nm and blue light LED,which caused trans to cis and cis to trans isomerization,respectively.Irradiation of corresponding model guest compounds without pillar[5]arene encapsulation resulted in near completely trans to cis and cis to trans isomerization,indicating the existence of pillar[5]arenes is the determining factor for the comprised photo isomerization efficiency.     

SYNTHESIS AND PROPERTIES OF COPOLYMERS CONTAINING CUCURBIT[6]URIL-BASED PSEUDOROTAXANE STRUCTURE

Novel copolymers based on acrylamide（AM）and complex pseudorotaxane monomer N’-（3-vinylbenzyl）-1,4- diaminobutane dihydrochloride with cucurbit[6]uril（CB[6]）（3VBCB）were prepared via free-radical polymerization in aqueous solution,and characterized by ¹H-NMR,FT-IR,elemental analysis and static light scattering.The compositions of the copolymers（PAM3VBCB）with pseudorotaxane units were determined by ¹H-NMR and elemental analysis.Thermal properties of the copolymers were studied by TGA,and the effects of the copolymer concentration and pH on the average hydrodynamic radius（R_h）of the copolymer molecules were studied by dynamic light scattering（DLS）.The experiment data show that CB[6]beads are localized on 1,4-diaminobutane units in side chains of the copolymers.TGA results show that thermal stability of the copolymer increases with increasing the content of pseudorotaxane unit because of the enhanced rigidity and the bulky steric hindrance of 3VBCB in side chains of PAM3VBCB.DLS data show that the average hydrodynamic radius of copolymer molecules increases with the increase in the copolymer concentration,and both the pH and electrical conductivity of PAM3VBCB solutions demonstrate an acute change with addition of NaOH because of CB[6] dethreading from the side chains of PAM3VBCB.CB[6]threading and dethreading of PAM3VBCB could be controlled by addition of BaCl₂ and Na₂SO₄     

Stable pillar [5] arene-based pseudo [1] rotaxanes formed in polar solution

Mono-alkyl-functionalized pillar[5] arenes P1,P2,and P3 were synthesized by click reaction,which exhibited different self-assembly behavior in polar solvent DMSO.Stable pseudo [1] rotaxane was formed by the self-complexation from P1 or P2,whereas,concentration-dependent pseudorotaxane structures were generated by P3 which bearing more flexible side chain.Interestingly,the obtained pseudo[1] rotaxanes exhibited a dynamic fast assembly process upon adding NaBF₄,resulting in the formation of Na⁺-induced pseudorotaxanes.     

Synthesis,crystal structures and complexing ability of difunctionalized copillar[5]arene Schiff bases

An efficient method for the synthesis of some difunctionalized copillar[5]arene Schiff bases from condensation of salicylaldehyde and its 5-chloro, 5-bromo, 3,5-di(t-butyl) substituted derivatives with corresponding diamino-functionalized copillar[5]arene, which were prepared by Gabriel reaction according to the reported method. Single-crystals of six copillar[5]arenes were determined by X-ray diffraction. An ORTEP of compounds showed that the two chains units of Schiff base exist in the outside of the cavity of pillar[5]arene. Furthermore, the complexing ability of these Schiff bases to transition metal ions were investigated by UV and fluorescence spectroscopy.     

An efficient synthesis of novel pyridothieno-fused thiazolo[3,2-a]pyrimidinones via Pictet–Spengler reaction

An efficient method for the synthesis of novel pyrido[3',2':4',5']thieno[3',2':2,3]pyrido [4,5:d][1,3]thiazolo[3,2-a]pyrimidine-4-one derivatives (5) has been developed using a Pictet-Spengler reaction between 2-(3-aminothieno[2,3-b]pyridin-2-yl)thiazolo[3,2-a] pyrimidin-5-one (3), which could be obtained from the condensation of 7-(chloromethyl)-5H-thiazolo[3,2-a]pyrimidin-5-one (1) with 3-cyanopyridine-2-thione (2) via Thorpe-Ziegler isomerization, and aromatic aldehydes under NH₂SO₃H as catalysis in good yields.     

Pillar[5]arene based conjugated macrocycle polymers with unique photocatalytic selectivity

The development of heterogeneous catalysts with substrate shape, size or electronic constitution selectivity is a huge challenge in photocatalysis. Reported herein is a host-guest interaction strategy to endow photocatalysts with special selectivity. By adjusting the precursors, conjugated macrocycle polymers (CMPs) with pillar[5]arene struts (CMP-1 and CMP-2) and a corresponding non-pillar[5]arene-contained conjugated organic polymer (COP-1) were prepared and the photocatalytic activities toward sulfide derivatives were investigated. The sulfides showed similar conversions when COP-1 was used as a photocatalyst, but exhibited significant differences when it turned to the CMPs. Remarkably, the conversion yield of S-1 achieved near 18 folds over the one of S-2 when CMP-2 was used as a catalyst. Mechanism studies confirmed that the “host-guest” effect of pillar[5]arene struts in CMPs was the main cause of the difference. The present work establishes CMPs as novel heterogeneous photocatalysts with substrate selectivity, and such a method will inspire the researchers concerning preparation of heterogeneous catalysts with excellent selectivity.     

Guest induced morphology transitions of star shaped pillar[5]arene trimer via endo host-guest and "exo-wall" electron-transfer interactions

Star shape bridged pillar[5]arene trimer(C3-PLT) based on benzene-1,3,5-tricarboxamide(BTAs) was successfully synthesized,which exhibited outstanding guest responsive morphology transition properties.The morphology tining studies was efficiently achieved with the addition of competitive guest molecules G1 and G2 by various self-assembly mechanisms.C3-PLT itself displays nanofiber morphology through H-type π-π stacking,and this nanofiber morphology can be completely transformed into spherical vesicles by host-guest interaction Gl,while upon addition of G2 into C3-PLT by means of "exo-wall" electron-transfer interactions,sheet superstructures can be observed.SEM,~1 H NMR,DOSY,fluorescence spectroscopy,and viscosity have verified the formation of supramolecular polymers and morphological transitions between C3-PLT with both guests.     

Regioselective intramolecular bridging of p-tert-butylcalix[7]arene

The first examples of singly bridged calix[7]arenes 2–4 have been obtained by base-promoted direct O-alkylation of p-tert-butylcalix[7]arene with a variety of bis-electrophiles including BrCH₂Cl, oligoethylene glycol ditosylates, and 1,4-bis(bromomethyl)benzene. 1,2-Bridging was favored with ‘short bite’ spanning elements, while the 1,4-isomer predominated with the others (yields up to 72% in the presence of Cs₂CO₃). Assignment of bridging pattern was mainly based on chemical shift of OH groups, in some cases confirmed by 2D NMR experiments. A hampered conformational mobility, depending on the position and nature of the bridge, was observed for compounds 2–4.     

Shaping calixarene frameworks. Synthesis and structure of a calix[8]arene containing three bridging phosphate units

The reaction of p-tert-butylcalix[8]arene with PCl₅, followed by hydrolysis and subsequent esterification with triethyl orthoformate afforded a triphosphate involving all phenolic oxygen atoms of the calixarene framework. As revealed by an X-ray diffraction study, the presence of two μ₃-(O,O,O) and one μ₂-(O,O) bridging phosphoryl groups results in an unusual lengthening of the calix[8]arene loop (longest OO separation: 13.9 Å)     

Design and synthesis of self-included pillar[5]arene-based bis-[1]rotaxanes

Two strategies for the design of new pillar[5]arene-based mechanically self-interlocked molecules (MSMs) are reported here. The first strategy is based on the construction of an intermediate pseudo[1]rotaxane followed by the desired bis-[1]rotaxane. The other one is based on the construction of the desired bis-[1]-rotaxane directly via a condensation reaction through host-guest interactions between a mono-functionalized pillar[5]arene and the axle. This compound has interesting self-assembly properties in methanol and some extended applications of this compound will be reported in the near future.     

Syntheses and structural characterization of trivalent lanthanide complexes of p-sulfonatothiacalix[4]arene

The X-ray crystallographic studies are reported for the water-soluble trivalent lanthanide complexes of the macrocyclic p-sulfonatothiacalix[4]arene [Gd(H₂O)₆((CH₃)₂SO)(p-sulfonatothiacalix[4]arene)]·H₃O⁺·5H₂O (1) and Na[Nd(H₂O)₆((CH₃)₂SO)(p-sulfonatothiacalix[4]arene)]·3H₂O (2). The complexes are isostructural and belong to monoclinic system, C2/m space group. The Ln³⁺ metal ion is coordinated by the thiacalixarene ligand via the sulfonato group, and also ligated by an oxygen atom of a dimethyl sulfoxide (DMSO) molecule that occupies the cavity of the thiacalixarene and six aqua ligands. The thiacalixarenes are linked by the coordinated water molecules through hydrogen bonding to form a 2D polymer. The p-sulfonatothiacalixarenes maintain the clay-like bi-layer structure in the coordination network.     

逐步法合成杯[4]芳烃关环反应的改进

对位带有3种或4种不同取代基的杯「4］芳烃一般通过逐步合成法合成．50年代后期,wS和Hllfl比rI'·'a就用［1十1十1十工］的逐步法9步合成出了杯［4］芳烃,总产率相当低·1979年B6hmer等［'·'报道用对位取代酚的线型三聚体与2,6一双溪甲基对取代酚在乙酸中进行关环反应合成杯［4」芳烃,这种［3＋l」的逐步法只需3步连续反应就能合成带有3种不同取代基的杯卜」芳烃,但最后。步关环产率仍然很低（2％、15％）［"．后来＊dhmeTD'等将关环反应改进为在TICI。／二氧六环体系中进行,产率有所提高,这种逐步法曾用于不对称杯［4」芳烃的…     

Pyrene-tiaraed pillar[5]arene: Strong intramolecular excimer emission applicable for photo-writing

A pyrene-tiaraed pillar[5]a re ne derivative was synthesized,which showed a concentration-independent intensive excimer emission.Photolysis of the pyrene-tiaraed pillar[5]arene led to a switch from excimer to monomer emission,applicable to photo-writing.     

Synthesis and structure of bis(methylaluminium · HCCH3) p-tert-butylcalix[4]arene

Treatment of p-tert-butylcalix[4]areneH₄ iwth AlMe₃ in toluene at elevated temperature affords after work-up the complex {[MeAl(NCMe)]₂(p-tert-butylcalix[4]arene)}, which adopts a flattened partial cone conformation as characterized by X-ray crystallographu.