Preparation, structures and some reactions of novel diynyl complexes of iron and ruthenium

Reactions between HC triple bond CC triple bond CSiMe3 and several ruthenium halide precursors have given the complexes Ru(C triple bond CC triple bond CSiMe3)(L2)Cp'[Cp'= Cp, L = CO (1), PPh3 (2); Cp' = Cp*, L2= dppe (3)]. Proto-desilylation of 2 and 3 have given unsubstituted buta-1,3-diyn-1-yl complexes Ru(C triple bond CC triple bond CH)(L2)Cp'[Cp'= Cp, L = PPh3 (5); Cp'= Cp*, L2 = dppe (6)]. Replacement of H in 5 or 6 with Au(PR3) groups was achieved in reactions with AuCl(PR3) in the presence of KN(SiMe3)2 to give Ru(C triple bond CC triple bond CAu(PR3)](L2)Cp'[Cp' = Cp, L = PPh3, R = Ph (7); Cp' = Cp*, L2= dppe, R = Ph (8), tol (9)]. The asymmetrically end-capped [Cp(Ph3P)2Ru]C triple bond CC triple bond C[Ru(dppe)Cp*] (10) was obtained from Ru(C triple bond CC triple bond CH)(dppe)Cp* and RuCl(PPh3)2Cp. Single-crystal X-ray structural determinations of and are reported, with a comparative determination of the structure of Fe(C triple bond CC triple bond CSiMe3)(dppe)Cp* (4), and those of a fifth polymorph of [Ru(PPh3)2Cp]2(mu-C triple bond CC triple bond C) (12), and [Ru(dppe)Cp]2(mu-C triple bond CC triple bond C) (13).     

Direct comparison of the magnetic and electronic properties of samarocene and ytterbocene terpyridine complexes

A new complex, Cp* 2Sm(tpy) ( 1, where Cp* = C 5Me 5, tpy = 2,2':6',2'-terpyridine) and its one-electron oxidized congener [Cp* 2Sm(tpy)]PF 6 ([ 1] (+)) have been synthesized and characterized with the aim of comparing their electronic and magnetic behavior to the known ytterbium analogues: Cp* 2Yb(tpy) ( 2) and [Cp* 2Yb(tpy)]OTf ([ 2] ( + )). These new samarium complexes have been characterized using single-crystal X-ray diffraction, (1)H NMR spectroscopy, cyclic voltammetry, optical spectroscopy, and bulk magnetic susceptibility measurements. All data for 1 indicate a Sm(III)-tpy* (-)[(4f) (5)-(pi*) (1)] ground-state electronic configuration similar to that found previously for 2 [(4f) (13)-(pi*) (1)]. Structural comparisons reveal that there are no significant changes in the overall geometries associated with the neutral and cationic samarium and ytterbium congeners aside from those anticipated based upon the lanthanide contraction. The redox potentials for the divalent Cp* 2Ln(THF) n precursors ( E 1/2(Sm (2+)) = -2.12 V, E 1/2(Yb (2+)) = -1.48 V) are consistent with established trends, the redox potentials (metal-based reduction and ligand-based oxidation) for 1 are nearly identical to those for 2. The correlation in the optical spectra of 1 and 2 is excellent, as expected for this ligand-radical based electronic structural assignment, but there does appear to be a red-shift ( approximately 400 cm (-1)) in all of the bands of 1 relative to those of 2 that suggests a slightly greater stabilization of the pi* level(s) in the samarium(III) complex compared to that in the ytterbium(III) complex. Similar spectroscopic overlap is observed for the monocationic complexes [ 1] (+) and [ 2] (+). Bulk magnetic susceptibility measurements for 1 reveal significantly different behavior than that of 2 due to differences in the electronic-state structure of the two metal ions. The implications of these differences in magnetic behavior are discussed.     

Characterization and reactivity of peralkylated LnIIAlIII heterobimetallic complexes

The heterobimetallic peralkylated complexes [Ln(AlR4)2]n (Ln = Sm, Yb; R = Me, Et) were synthesized by a silylamide elimination route from Ln[N(SiMe3)2]2(THF)2 and an excess of AlR3. The solid-state structure of [Sm(AlEt4)2]n is isomorphous to that of the ytterbium derivative. Polymeric [Yb(AlMe4)2]n was examined by 1H and 13C MAS NMR spectroscopy revealing the presence of distinct bridging methyl groups. The reaction of [Yb(AlMe4)2]n and 1,10-phenanthroline (Phen) afforded the monomeric donor adduct Yb(AlMe4)2(Phen), while the protonolysis reaction with 2 equiv. C5Me5H (HCp*) yielded a separated ion pair of composition [Cp*Yb(THF)(4)][AlMe(4)]. Single-crystal X-ray diffraction data are provided for both ytterbium(II) complexes. Solid-state magnetic measurements (SQUID) were performed on [Sm(AlMe4)2]n, [Sm(AlEt4)2]n, SmI2(THF)2 and Sm[N(SiMe3)2]2(THF)2 showing high effective magnetic moments 3.67micro(B) < micro(eff) < 4.43micro(B).     

Different C-C coupling reactions of permethyltitanocene and permethylzirconocene with disubstituted 1,3-butadiynes

Herein we describe different C-C coupling reactions of permethyltitanocene and -zirconocene with disubstituted 1,3-butadiynes. The outcomes of these reactions vary depending on the metals and the diyne substituents. The reduction of [Cp2*MCl2] (Cp* = C5Me5; M = Ti, Zr) with Mg in the presence of disubstituted butadiynes RC triple bond C-C triple bond CR' is suitable for the synthesis of different C-C coupling products of the diyne and the permethylmetallocenes, and provides a new method for the generation of functionalized pentamethyl-cyclopentadienyl derivatives. For M = Zr and R = R' = tBu, the reaction gives, by a twofold activation of one pentamethylcyclopentadienyl ligand, the complex [Cp*Zr[-C(=C=CHtBu)-CHtBu-CH2-eta5-C5Me3-CH2-]] (3), containing a fulvene ligand that is coupled to the modified substrate (allenic subunit). When using the analogous permethyltitanocene fragment "Cp2*Ti", the reaction depends strongly on the substituents R and R'. The coupling product of the butadiyne with two methyl groups of one of the pentamethylcyclopentadienyl ring systems, [Cp*Ti[eta5-C5Me3-(CH2-CHR-eta2-C2-CHR'-CH2)]], is obtained with R = R' = tBu (4) and R = tBu, R' = SiMe3 (5). In these complexes one pentamethylcyclopentadienyl ligand is annellated to an eight-membered ring with a C-C triple bond, which is coordinated to the titanium center. A different activation of both pentamethylcyclopentadienyl ligands is observed for R = R' = Me, resulting in the complex [[eta5-C5Me4(CH2)-]Ti[-C(=CHMe)-C(=CHMe)-CH2-eta5-C5Me4]] (6), which displays a fulvene as well as a butadienyl-substituted pentamethylcyclopentadienyl ligand. The influence exerted by the size of the metal is illustrated in the reaction of [Cp2*ZrCl2] with MeC triple bond C-C triple bond CMe. Here the five-membered metallacyclocumulene complex [Cp2*Zr(eta4-1,2,3,4-MeC4Me)] (7) is obtained. The reaction paths found for R = R' = Me are identical to those formerly described for R = R' = Ph.     

Ligand substituent effect observed for ytterbocene 4'-cyano-2,2':6',2' '-terpyridine

A new N-heterocyclic complex of ytterbocene (Cp(2)Yb(II), Cp = C(5)Me(5)) has been prepared by the addition of 4'-cyano-2,2':6',2' '-terpyridine (tpyCN) to Cp(2)Yb(II)(OEt(2)) in toluene to give a dark blue species designated as Cp(2)Yb(tpyCN). The effect of the electron-withdrawing group (-CN) on the redox potentials of the charge-transfer form of this complex [in which an electron is transferred from the f(14) metal center to the lowest unoccupied (pi) molecular orbital of the tpyCN ligand to give a 4f(13)-pi(1) electronic configuration] has been quantified by cyclic voltammetry. The tpyCN ligand stabilizes this configuration by 60 mV more than that in the unsubstituted tpy ligand complex and by 110 mV more than that in the unsubstituted bpy ligand complex. Magnetic susceptibility measurements corroborate the enhanced stabilization of the 4f(13)-pi(1) configuration by the substituted terpyridyl ligand complex. Furthermore, the temperature dependence of the magnetic data is most consistent with a thermally induced valence tautomeric equilibrium between this paramagnetic 4f(13)-pi(1) form that dominates near room temperature and the diamagnetic 4f(14)-pi(0) form that dominates at low temperature. Differing coordination modes for the tpyCN ligand to the ytterbocene center have also been confirmed by isolation and X-ray crystallographic characterization of complexes binding through either the cyano nitrogen of tpyCN or the three terpyridyl nitrogen atoms of tpyCN.     

Room-temperature phosphorescence and energy transfer in luminescent multinuclear platinum(II) complexes of branched alkynyls

A series of luminescent branched platinum(II) alkynyl complexes, [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]C-C6H4C[triple bond]C}3C6H3] (R=C6H5, C6H4OMe, C6H4Me, C6H4CF3, C5H4N, C6H4SAc, 1-napthyl (Np), 1-pyrenyl (Pyr), 1-anthryl-8-ethynyl (HC[triple bond]CAn)), [1,3-{PyrC[triple chemical bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3], and [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-(HC[triple bond]C)C6H3], was successfully synthesized by using the precursors [1,3,5-{Cl(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] or [1,3-{Cl(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3]. The X-ray crystal structures of [1,3,5-{MeOC6H4C[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] and [1,8-{Cl(PEt3)2PtC[triple bond]C}2An] have been determined. These complexes were found to show long-lived emission in both solution and solid-state phases at room temperature. The emission origin of the branched complexes [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] with R=C6H5, C6H4OMe, C6H4Me, C6H4CF3, C5H4N, and C6H4SAc was tentatively assigned to be derived from triplet states of predominantly intraligand (IL) character with some mixing of metal-to-ligand charge-transfer (MLCT) (dpi(Pt)-->pi*(C[triple bond]CR)) character, while the emission origin of the branched complexes with polyaromatic alkynyl ligands, [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] with R=Np, Pyr, or HC[triple bond]CAn, [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3], [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-(HC[triple bond]C)C6H3], and [1,8-{Cl(PEt3)2PtC[triple bond]C}2An], was tentatively assigned to be derived from the predominantly 3IL states of the respective polyaromatic alkynyl ligands, mixed with some 3MLCT (d(pi)(Pt)-->pi*(C[triple bond]CR)) character. By incorporating different alkynyl ligands into the periphery of these branched complexes, one could readily tune the nature of the lowest energy emissive state and the direction of the excitation energy transfer.     

Trapping reactions of an intermediate containing a tungsten-phosphorus triple bond with alkynes

The thermolysis of the phosphinidene complex [Cp*P[W(CO)5]2] (1) in toluene in the presence of tBuC(triple bond)CMe leads to the four-membered ring complexes [[[eta2-C(Me)C(tBu)]Cp*(CO)W(mu3-P)[W(CO)3]][eta4:eta1:eta1-P[W(CO)5]WCp*(CO)C(Me)C(tBu)]] (4) as the major product and [[W[Cp*(CO)2]W(CO)2WCp*(CO)[eta1:eta1-C(Me)C(tBu)]](mu,eta3:eta2:eta1-P2[W(CO)5]] (5). The reaction of 1 with PhC(triple bond)CPh leads to [[W(Co)2[eta2-C(Ph)C(Ph)]][(eta4:eta1-P(W(CO)5]W[Cp*(CO)2)C(Ph)C(Ph)]] (6). The products 4 and 6 can be regarded as the formal cycloaddition products of the phosphido complex intermediate [Cp*(CO)2W(triple bond)P --> W(CO)5] (B), formed by Cp* migration within the phosphinidene complex 1. Furthermore, the reaction of 1 with PhC(triple bond)CPh gives the minor product [[[eta2:eta1-C(Ph)C(Ph)]2[W(CO)4]2][mu,eta1:eta1-P[C(Me)[C(Me)]3C(Me)][C(Ph)](C(Ph)]] (7) as a result of a 1,3-dipolaric cycloaddition of the alkyne into a phosphaallylic subunit of the Cp*P moiety of 1. Compounds 4-7 have been characterized by means of their spectroscopic data as well as by single-crystal X-ray structure analysis.     

Synthesis and structures of crystalline Li, Al and Sn(II) 1-azaallyls and beta-diketiminates derived from [Li{mu,eta3-N(SiMe3)C(Ad)C(H)SiMe3}]2 (Ad = 1-adamantyl)

The crystalline dimeric 1-azaallyllithium complex [Li{mu,eta(3-N(SiMe3)C(Ad)C(H)SiMe3}]2 (1) was prepared from equivalent portions of Li[CH(SiMe3)2] and 1-cyanoadamantane (AdCN). Complex was used as precursor to each of the crystalline complexes 2-8 which were obtained in good yield. By 1-azaallyl ligand transfer, 1 afforded (i) [Al{eta3-N(SiMe3)C(Ad)C(H)SiMe3}{kappa1-N(SiMe3)C(Ad)=C(H)SiMe3-E}Me] (5) with [AlCl2Me](2), (ii) [Sn{eta3-N(SiMe3)C(Ad)C(H)SiMe3}2] (7) with Sn[N(SiMe3)2]2, and (iii) [Li(N{C(Ad)=C(H)SiMe3-E}{Si(NN)SiMe3})(thf)2] (8) with the silylene Si[(NCH(2)Bu(t))2C6H(4)-1,2] [= Si(NN)]. By insertion into the C[triple bond, length as m-dash]N bond of the appropriate cyanoarene RCN, gave the beta-diketiminate [Li{mu-N(SiMe3)C(Ad)C(H)C(R)NSiMe3}]2 [R = Ph (2), C(6)H(4)Me-4 (3)], and yielded [Al{kappa2-N(SiMe3)C(Ad)C(H)C(Ph)NSiMe3}{kappa1-N(SiMe3)C(Ad)=C(H)SiMe3-E}Me] (6). The beta-diketiminate [Al{kappa2-N(SiMe3)C(Ad)C(H)C(Ph)NSiMe3}Me2] (4) was prepared from 2 and [AlClMe2]2. The X-ray structures of 1 and 3-8 are presented. Multinuclear NMR spectra in C6D6 or C6D5CD3 have been recorded for each of 1-8; such data on 8 revealed that in solution two minor isomers were also present.     

Pentamethylcyclopentadienyl-iridium(III) complexes with pyridylamino ligands: synthesis and applications as asymmetric catalysts for Diels-Alder reactions

Reaction of the dimer [(Cp*IrCl)2(P-Cl)2] with chiral pyridylamino ligands (pyam, L1-L5) in the presence of NaSbF6 gave complexes [Cp*IrCl(pyam)][SbF6] 1-5 as diastereomeric mixtures, which have been fully characterised, including the X-ray molecular structure determination of the complexes (S(Ir),R(N),R(C))-[Cp*IrClL1][SbF6] 1a and (R(Ir),S(N),S(C))-[Cp*IrClL5][SbF6] 5a. Treatment of these cations with AgSbF6 affords the corresponding aqua species [Cp*Ir(pyam)(H2O)][SbF6]2 6-10 which have been also fully characterised. The molecular structure of the complex (S(Ir),R(N),R(C))-[Cp*IrL,(H2O)][SbF6]2 6 has been determined by X-ray diffractometric methods. The aqua complexes [Cp*Ir(pyam)(H2O)][SbF6]2 (6, pyam = L2 (7), L3 (8)) evolve to the cyclometallated species [Cp*Ir{kappa3(N,N',C)-(R)-(C6H4)CH(CH3)NHCH2C5NH4}][SbF6] (11), [Cp*Ir{kappa3(N,N',C)-(R)-(C10H6)CH(CH3)-NHCH2C5NH4)}][SbF6] (12), and [Cp*Ir{kappa3(N,N',C)-(R)-(C10H6)CH(CH3)NHCH2C9NH6)}][SbF6] (13) respectively, via intramolecular activation of an ortho C-H aryl bond. Complexes 6-10 are enantioselective catalysts for the Diels-Alder reaction between methacrolein and cyclopentadiene. Reaction occurs rapidly at room temperature with good exo : endo selectivity (from 81 : 19 to 98 : 2) and moderate enantioselectivity (up to 72%). The involved intermediate Lewis acid-dienophile compounds [Cp*Ir(pyam)(methacrolein)][SbF]2 (pyam = L4 (14), L5 (15)) have been isolated and characterised.     

Synthesis, characterization, and activity in ethylene polymerization of silica supported cationic cyclopentadienyl zirconium complexes

Cp*ZrMe3 reacts with silica pretreated at 800 degrees C, SiO(2-(800)) through two pathways: (a) protolysis of a Zr-Me group by surface silanols and (b) transfer of a methyl group to the surface by opening of strained siloxane bridges, in a relative proportion of ca. 9/1, respectively, affording a well-defined surface species [([triple bond]SiO)ZrCp*(Me)2], 3, but with two different local environments 3a, [([triple bond]SiO)ZrCp*(Me)2][[triple bond]Si-O-Si[triple bond]], and the other with 3b, [structure: see text]. The reaction of the species 3 with B(C6F5)3 is controlled by this local environment and gives three surface species [([triple bond]SiO)ZrCp*(Me)](+)[MeB(C6F5)3]- [[triple bond]Si-O-Si[triple bond]], 4a (20%), [([triple bond]SiO)ZrCp*(Me)](+)[(Me)B(C6F5)3]- [[triple bond]Si-Me], 4b (10%), and [([triple bond]SiO)2ZrCp*](+)[(Me)B(C6F5)(3)](-)[[triple bond]Si-O-Si[triple bond]], 5 (70%). On the contrary, the reaction of Cp*Zr(Me)3, Cp2Zr(Me)2 with [[triple bond]SiO-B(C6F5)3](-)[HNEt2Ph]+, 6, leads to a unique species [([triple bond]SiO)B(C6F5)3](-)[Cp*Zr(Me)2.NEt2Ph]+, 7, and [([triple bond]SiO)ZrCp2](+)[(Me)B(C6F5)3]-, 9 respectively. The complexes 4 and 7 are active catalysts in ethylene polymerization at room temperature, 93 and 67 kg PE mol Zr1- atm(-1) bar(-1), respectively, indicating that covalently bounded Zr catalyst 4 is slightly more active than the "floating" cationic catalyst 7.     

Amido/amine triazacyclononane-based zirconium complexes: syntheses, reactivity, and structures

The reactions of [Zr(NMe2)4]2 with triamido-triazacyclonane ligand precursors, {NH(Ph)SiMe2}3tacn (H3N3[9]N3) and {NH(C6H4F)SiMe2}3tacn (H3N3-F[9]N3), led to the formation of complexes [Zr(NMe2)2{N(Ph)SiMe2}2{NH(Ph) SiMe2}tacn], 1, and [Zr(NMe2)2{N(o-C6H4F)SiMe2}2{NH(o-C6H4F)SiMe2} tacn], 2, where the zirconium is coordinated to two remaining dimethylamido ligands and to a dianionic tacn-based ligand, [{N(Ph')SiMe2}2{NH(Ph')SiMe2}tacn]2-, that formed from deprotonation of two amine pendent arms of the ligands' precursors. The third pendent arm of H3N3[9]N3 and H3N3-F[9]N3 remains neutral and not bonded to the zirconium. Treatment of 1 with NaH led to the synthesis of [Zr(NMe2){N(Ph)SiMe2}2tacn], 3, that results from the cleavage of the N-Si bond of the original neutral pendent arm. Complexes [ZrCl{N(Ph')SiMe2}2tacn] (Ph' = C6H5, 4, and C6H4F, 5) have been obtained by reactions of ZrCl4 with {MN(Ph')SiMe2}3tacn.2THF (M = Li, Na). Reactions of 4 and 5 with LiC triple bond CPh led to the syntheses of [Zr(CCPh){N(Ph')SiMe2}2tacn] (Ph' = C6H5, 6, and C6H4F, 7). The solid-state structure of 3 shows a chiral metal center.     

Supported cationic complexes: selective preparation and characterization of the well-defined electrophilic metallocenium cation [[triple bond]SiO-B(C6F5)3]- [Cp*ZrMe2(Et2NPh)]+ supported on silica

The reaction of Cp*ZrMe3, 1, with the heterogeneous activator [[triple bond]SiO-B(C6F5)3]- [HNEt2Ph]+, 2, has been investigated to generate, by an irreversible process of methane elimination, the well-defined cationic silica-supported metallocenium species [[triple bond]SiO-B(C6F5)3]- [Cp*ZrMe2(NEt2Ph)]+, 3, as an active olefin polymerisation catalyst.     

Trimethylsilylated allyl complexes of nickel. The stabilized bis(pi-allyl)nickel complex [eta3-1,3-(SiMe3)2C3H3]2Ni and its mono(pi-allyl)NiX (X=Br, I) derivatives

Reaction of 2 equiv of K[1,3-(SiMe3)2C3H3] with NiBr2(dme) in THF at -78 degrees C produces the orange pi-allyl complex [1,3-(SiMe3)2C3H3]2Ni (1). Unlike the pyrophoric (C3H5)2Ni, the trimethylsilylated derivative only slowly decomposes in air (from hours to days). Both eclipsed (1a) and staggered (1b) conformations are found in solution; the eclipsed form irreversibly converts to the thermodynamically more stable staggered conformation when heated above 85 degrees C. Single-crystal X-ray structures obtained for both 1a and 1b confirm that the allyl ligands are bound in a trihapto manner to the metals and that trimethylsilyl substituents are in syn, anti arrangements. Density functional theory calculations performed on the bis(allyl)nickel complexes indicate that the substituents exert little effect on the basic metal-ligand geometries. Trimethylphosphine is converted to tetramethyltetraphosphane, (MeP)4, on reaction with 1. In toluene, 3-bromo-1,3-bis(trimethylsilyl)propene reacts with (COD)2Ni to produce the dimeric purple complex {[1,3-(SiMe3)2C3H3]NiBr}2 (2a). Both NMR and X-ray crystallographic data establish that the allyl ligands are staggered and that the trimethylsilyl substituents are in a syn, syn conformation. NMR data indicate that the reaction of one equivalent of 1 with Br2 in benzene produces an analogous complex (2b) with the allyl ligand substituents in a syn, anti configuration. When 1 equiv of 1 is treated with I2 in hexanes, the dark red dimeric complex {[1,3-(SiMe3)2C3H3]NiI}2 (3) is formed. Its X-ray crystal structure demonstrates that both eclipsed (3a) and staggered (3b) allyl conformation are present. The trimethylsilyl groups on the allyl ligands are in syn, anti arrangements in the two forms.     

Selective ruthenium-catalyzed transformations of enynes with diazoalkanes into alkenylbicyclo[3.1.0]hexanes

Reaction of a variety of CCH bond-containing 1,6-enynes with N2CHSiMe3 in the presence of RuCl(COD)Cp* as catalyst precursor leads, at room temperature, to the general formation of alkenylbicyclo[3.1.0]hexanes with high Z-stereoselectivity of the alkenyl group and cis arrangement of the alkenyl group and an initial double-bond substituent, for an E-configuration of this double bond. The stereochemistry is established by determining the X-ray structures of three bicyclic products. The same reaction with 1,6-enynes bearing an R substituent on the C1 carbon of the triple bond results in either cyclopropanation of the double bond with bulky R groups (SiMe3, Ph) or formation of alkylidene-alkenyl five-membered heterocycles, resulting from a beta elimination process, with less bulky R groups (R = Me, CH2CH=CH2). The reaction can be applied to in situ desilylation in methanol and direct formation of vinylbicyclo[3.1.0]hexanes and to the formation of some alkenylbicyclo[4.1.0]heptanes from 1,7-enynes. The catalytic formation of alkenylbicyclo[3.1.0]hexanes also takes place with enynes and N2CHCO2Et or N2CHPh. The reaction can be understood to proceed by an initial [2+2] addition of the Ru=CHSiMe3 bond with the enyne CCH bond, successively leading to an alkenylruthenium-carbene and a key alkenyl bicyclic ruthenacyclobutane, which promotes the cyclopropanation, rather than metathesis, into bicyclo[3.1.0]hexanes. Density functional theory calculations performed starting from the model system Ru(HCCH)(CH2=CH2)Cl(C5H5) show that the transformation into a ruthenacyclobutane intermediate occurs with a temporary eta3-coordination of the cyclopentadienyl ligand. This step is followed by coordination of the alkenyl group, which leads to a mixed alkyl-allyl ligand. Because of the non-equivalence of the terminal allylic carbon atoms, their coupling favors cyclopropanation rather than the expected metathesis process. A direct comparison of the energy profiles with respect to those involving the Grubbs catalyst is presented, showing that cyclopropanation is favored with respect to enyne metathesis.     

Probing ruthenium-acetylide bonding interactions: synthesis, electrochemistry, and spectroscopic studies of acetylide-ruthenium complexes supported by tetradentate macrocyclic amine and diphosphine ligands

The synthesis and spectroscopic properties of trans-[RuL4(C[triple bond]CAr)2] (L4 = two 1,2-bis(dimethylphosphino)ethane, (dmpe)2; 1,5,9,13-tetramethyl-1,5,9,13-tetraazacyclohexadecane, 16-TMC; 1,12-dimethyl-3,4:9,10-dibenzo-1,12-diaza-5,8-dioxacyclopentadecane, N2O2) are described. Investigations into the effects of varying the [RuL4] core, acetylide ligands, and acetylide chain length for the [(-)C[triple bond]C(C6H4C[triple bond]C)(n-1)Ph] and [(-)C[triple bond]C(C6H4)(n-1)Ph] (n = 1-3) series upon the electronic and electrochemical characteristics of trans-[RuL4(C[triple bond]CAr)2](0/+) are presented. DFT and TD-DFT calculations have been performed on trans-[Ru(L')4(C[triple bond]CAr)2](0/+) (L' = PH3 and NH3) to examine the metal-acetylide pi-interaction and the nature of the associated electronic transition(s). It was observed that (1) the relationship between the transition energy and 1/n for trans-[Ru(dmpe)2{C[triple bond]C(C6H4C[triple bond]C)(n-1)Ph}2] (n = 1-3) is linear, and (2) the sum of the d(pi)(Ru(II)) --> pi*(C[triple bond]CAr) MLCT energy for trans-[Ru(16-TMC or N2O2)(C[triple bond]CAr)2] and the pi(C[triple bond]CAr) --> d(pi)(Ru(III)) LMCT energy for trans-[Ru(16-TMC or N2O2)(C[triple bond]CAr)2]+ corresponds to the intraligand pi pi* absorption energy for trans-[Ru(16-TMC or N2O2)(C[triple bond]CAr)2]. The crystal structure of trans-[Ru(dmpe)2{C[triple bond]C(C6H4C[triple bond]C)2Ph}2] shows that the two edges of the molecule are separated by 41.7 A. The electrochemical and spectroscopic properties of these complexes can be systematically tuned by modifying L4 and Ar to give E(1/2) values for oxidation of trans-[RuL4(C[triple bond]CAr)2] that span over 870 mV and lambda(max) values of trans-[RuL4(C[triple bond]CAr)2] that range from 19,230 to 31,750 cm(-1). The overall experimental findings suggest that the pi-back-bonding interaction in trans-[RuL4(C[triple bond]CAr)2] is weak and the [RuL4] moiety in these molecules may be considered to be playing a "dopant" role in a linear rigid pi-conjugated rod.     

Synthesis of amidolanthanides with new chiral biaryl-based NNO ligands and their use as catalysts for enantioselective hydroamination/cyclization

A new series of amidolanthanides have been prepared from the reactions between Ln[N(SiMe3)2]3 and the chiral NNO ligands, (S)-2-(pyrrol-2-ylmethyleneamino)-2'-hydroxy-6,6'-dimethyl-1,1'-biphenyl (2H2) and (S)-5,5',6,6',7,7',8,8'-octahydro-2-(pyrrol-2-ylmethyleneamino)-2'-hydroxy-1,1'-binaphthyl (3H2), which are synthesized from the condensation of pyrrole-2-carboxaldehyde with 1 equiv of (S)-2-amino-2'-hydroxy-6,6'-dimethyl-1,1'-biphenyl or (S)-5,5',6,6',7,7',8,8'-octahydro-2-amino-2'-hydroxy-1,1'-binaphthyl, in the presence of molecular sieves at 70 degrees C, respectively. Treatment of 2H2 with 1 equiv of Ln[N(SiMe3)2]3 (Ln=Sm, Yb) in toluene under reflux, followed by recrystallization from a toluene solution, gives the dimeric amido complexes, {2-SmN(SiMe3)2}2.0.5C7H8 (6.0.5C7H8) and {2-YbN(SiMe3)2} 2.1.5C7H8(8.1.5C7H8), in good yields. While under similar reaction conditions, the reaction of 2H2 with 1 equiv of Y[N(SiMe3)2]3 leads to the isolation of a mixture of {2-YN(SiMe3)2}2 (7a) and {(2)2Y}Y[N(SiMe3)2]2(7b) in 82% total yield; the reaction of 3H2 with 1 equiv of Ln[N(SiMe3)2]3 (Ln=Y, Yb) gives the trinuclear complexes, {(3)2Ln}2LnN(SiMe3) 2.1.5C7H8 (Ln=Y(9.1.5C7H8), Yb(10.1.5C7H8)), in good yields. All compounds have been characterized by various spectroscopic techniques and elemental analyses. The solid-state structures of compounds 2H2 and 6- 10 have been further confirmed by X-ray diffraction analyses. Complexes 6- 9 are active catalysts for the asymmetric hydroamination/cyclization of aminoalkenes, affording cyclic amines in good yields with moderate ee values.     

Cp2V] migration along an octatetrayne chain: from the monometallic complex (Cp2V(2-4eta-tBuC triple bond C2-C triple bond CC triple bond CtBu)] to the dimetallic complex

The oxidative addition of one equivalent of [Cp2V] (4) to the tetrayne ligand tBuC triple bond CC triple bond CC triple bond CC triple bond CtBu (5) gives the monometallic complex [Cp2V(3-4eta-tBuC triple bond C-C2-C triple bond CC triple bond CtBu)] (7). Compound 7 reacts further with a second equivalent of [Cp2V] to give the dimetallic complex [(Cp2V)2(1-2eta:7-8eta-tBuC2-C triple bond CC triple bond C-C2tBu)] (8), which involves a shift of the first coordinated [Cp2V] unit from the internal C3-C4 to the external C1-C2 positions on the alkynyl ligand. Compound 8 is also directly obtained by the addition of two equivalents of [Cp2V] to 5. Reversibly, reaction of 8 with 5 leads to 7. This exchange reaction between 7 and 8 by adding successively 5 and 4 has been monitored by EPR spectroscopy. By contrast, the oxidative addition of one or two equivalents of [Cp2V] to the tetrayne ligand PhC triple bond CC triple bond CC triple bond CC triple bond CPh (6) gives the homodimetallic complex [(Cp2V)2(1-2eta:7-8eta-PhC2-CC triple bond CC triple bond C-C2-Ph)] (9). Both monometallic and dimetallic complexes 7, 8, and 9 have been characterized by X-ray diffraction. Magnetic moment measurements for 8 and 9 from 300 to 4 K indicated a weak antiferromagnetic J exchange coupling of -12.5 and -4.1 cm(-1), respectively.     

Living photolytic ring-opening polymerization of amino-functionalized [1]ferrocenophanes: synthesis and layer-by-layer self-assembly of well-defined water-soluble polyferrocenylsilane polyelectrolytes

Facile synthetic routes have been developed that provide access to cationic and anionic water-soluble polyferrocenylsilane (PFS) polyelectrolytes with controlled molecular weight and narrow polydispersity. Living photolytic ring-opening polymerization of amino-functionalized [1]ferrocenophane (fc) monomers [fcSiMe{C[triple chemical bond]CCH(2)N(SiMe(2)CH(2))(2)}] (3), [fcSi{C[triple chemical bond]CCH(2)N(SiMe(2)CH(2))(2)}(2)] (10), [fcSiMe(C[triple chemical bond]CCH(2)NMe(2))] (14), and [fcSiMe(p-C(6)H(4)CH(2)NMe(2))] (20) yielded the corresponding polyferrocenylsilanes [(fcSiMe{C[triple chemical bond]CCH(2)N(SiMe(2)CH(2))(2)})(n)](5), [(fcSi{C[triple chemical bond]CCH(2)N(SiMe(2)CH(2))(2)}(2))(n)] (11), [{fcSiMe(C[triple chemical bond]CCH(2)NMe(2))}(n)] (15), and [{fcSiMe(p-C(6)H(4)CH(2)NMe(2))}(n)] (21) with controlled architectures. Further derivatization of 5, 15, and 21 generated water-soluble polyelectrolytes [(fcSiMe{C[triple chemical bond]CCH(2)N(CH(2)CH(2)CH(2)SO(3)Na)(2)})(n)] (6), [{fcSiMe(C[triple chemical bond]CCH(2)NMe(3)OSO(3)Me)}(n)] (7), and [{fcSiMe(p-C(6)H(4)CH(2)NMe(3)OSO(3)Me)}(n)] (22), respectively. The polyelectrolytes were readily soluble in water and NaCl aqueous solutions, with 6 and 22 exhibiting long-term stability in aqueous media. The PFS materials 6 and 22, have been utilized in the layer-by-layer (LbL) self-assembly of electrostatic superlattices. Our preliminary studies have indicated that films made from controlled low molecular-weight PFSs possess a considerably thinner bilayer thickness and higher refractive index than those made from PFSs that have an uncontrolled high molecular-weight. These results suggest that the structure and optical properties of LbL ultra-thin films can be tuned by varying polyelectrolyte chain length. The water-soluble low molecular weight PFSs are also useful materials for a range of applications including LbL self-assembly in highly confined spaces.     

Mechanism of reversible alkyne coupling at zirconocene: ancillary ligand effects

The mechanism of reversible alkyne coupling at zirconium was investigated by examination of the kinetics of zirconacyclopentadiene cleavage to produce free alkynes. The zirconacyclopentadiene rings studied possess trimethylsilyl substituents in the alpha-positions, and the ancillary Cp2, Me2C(eta(5)-C5H4)2, and CpCp* (Cp* = eta(5)-C5Me5) bis(cyclopentadienyl) ligand sets were employed. Fragmentation of the zirconacyclopentadiene ring in Cp2Zr[2,5-(Me3Si)2-3,4-Ph2C4] with PMe3, to produce Cp2Zr(eta(2)-PhC[triple bond]CSiMe3)(PMe3) and free PhC[triple bond]CSiMe3, is first-order in initial zirconacycle concentration and zero-order in incoming phosphine (k(obs) = 1.4(2) x 10(-5) s(-1) at 22 degrees C), and the activation parameters determined by an Eyring analysis (DeltaH(double dagger) = 28(2) kcal mol(-1) and DeltaS(double dagger) = 14(4) eu) are consistent with a dissociative mechanism. The analogous reaction of the ansa-bridged complex Me2C(eta(5)-C5H4)2Zr[2,5-(Me3Si)2-3,4-Ph2C4] is 100 times faster than that for the corresponding Cp2 complex, while the corresponding CpCp* complex reacts 20 times slower than the Cp2 derivative. These rates appear to be largely influenced by the steric properties of the ancillary ligands.     

Synthesis and structural characterization of a series of lanthanide(II) amides: steric effect of amido ligand

The synthesis and structures of a series of lanthanide(II) and lanthanide(III) complexes supported by the amido ligand N(SiMe3)Ar were described. Several lanthanide(III) amide chlorides were synthesized by a metathesis reaction of LnCl3 with lithium amide, including {[(C6H5)(Me3Si)N]2YbCl(THF)}2.PhCH3 (1), [(C6H3-iPr2-2,6)(SiMe3)N]2YbCl(mu-Cl)Li(THF)3.PhCH3 (4), [(C6H3-iPr2-2,6)(SiMe3)N]YbCl2(THF)3 (6), and [(C6H3-iPr2-2,6)(SiMe3)N]2SmCl3Li2(THF)4 (7). The reduction reaction of 1 with Na-K alloy afforded bisamide ytterbium(II) complex [(C6H5)(Me3Si)N]2Yb(DME)2 (2). The same reaction for Sm gave an insoluble black powder. An analogous samarium(II) complex [(C6H5)(Me3Si)N]2Sm(DME)2 (3) was prepared by the metathesis reaction of SmI2 with NaN(C6H5)(SiMe3). The reduction reaction of ytterbium chloride 4 with Na-K alloy afforded monoamide chloride {[(C6H3-iPr2-2,6)(SiMe3)N]Yb(mu-Cl)(THF)2}2 (5), which is the first example of ytterbium(II) amide chloride, formed via the cleavage of the Yb-N bond. The same reduction reaction of 7 gave a normal bisamide complex [(C6H3-iPr2-2,6)(SiMe3)N]2Sm(THF)2 (8) via Sm-Cl bond cleavage. This is the first example for the steric effect on the outcome of the reduction reaction in lanthanide(II) chemistry. 5 can also be synthesized by the Na/K alloy reduction reaction of 6. All of the complexes were fully characterized including X-ray diffraction for 1-7.