A β-glucosidase from Sclerotinia sclerotiorum

The filamentous fungus Sclerotinia sclerotiorum, grown on a xylose medium, was found to excrete one β-glucosidase (β-glu x). The enzyme was purified to apparent homogeneity by ammonium sulfate precipitation, gel filtration, anion-exchange chromatography, and high-performance liquid chromatography (HPLC) gel filtration chromatography. Its molecular mass was estimated to be 130 kDa by HPLC gel filtration and 60 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis, suggesting that β-glu x may be a homodimer. For p-nitrophenyl β-d-glucopyranoside hydrolysis, apparent K _m and V _max values were found to be 0.09 mM and 193 U/mg, respectively, while optimum temperature and pH were 55–60°C and pH 5.0, respectively. β-Glu x was strongly inhibited by Fe²⁺ and activated about 35% by Ca²⁺. β-Glu x possesses strong transglucosylation activity in comparison with commercially available β-glucosidases. The production rate of total glucooligosaccharides (GOSs) from 30% cellobiose at 50°C and pH 5.0 for 6 h with 0.6 U/mL of enzyme preparation was 80 g/L. It reached 105 g/L under the same conditions when using cellobiose at 350 g/L (1.023 M). Finally, GOS structure was determined by mass spectrometry and ¹³C nuclear magnetic resonance spectroscopy.     

Purification and Characterization of Thermostable α-Galactosidase from <Emphasis Type="Italic">Aspergillus terreus</Emphasis><Subscript>GR</Subscript>

An extracellular thermostable α-galactosidase producing Aspergillus terreus _GR strain was isolated from soil sample using guar gum as sole source of carbon. It was purified to apparent homogeneity by acetone precipitation, gel filtration followed by DEAE-Sephacel chromatographic step. The purified enzyme showed a single band after sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The molecular weight of the purified enzyme after SDS-PAGE was 108 kDa. The enzyme showed optimum pH and temperature of 5.0 and 65 °C, respectively, for artificial substrate pNPαGal. α-Galactosidase from A. terreus _GR is found to be thermostable, as it was not inactivated after heating at 65 °C for 40 min. The K _m for pNPαGal, oNPαGal, raffinose, and stachyose are 0.1, 0.28, 0.42, and 0.33 mM, respectively. Inhibitors such as 1,10-phenanthroline, phenylmethylsulfonyl fluoride, ethylenediaminetetraacetic acid, mercaptoethanol, and urea have no effect, whereas N-bromosuccinamide inhibited enzyme activity by 100%. Among metal ions tested, Mg²⁺, Ni²⁺, Ca²⁺, Co²⁺, and Mn²⁺ had no effect on enzyme activity, but Ag⁺, Hg²⁺, and Cu²⁺ have inhibited complete activity.     

Partial purification and properties of putrescine oxidase from Candida guilliermondii

Putrescine oxidase ([PO]; E.C. 1.4.3.4), which catalyzes the oxidative deamination of putrescine into γ-aminobutyraldehyde, has been partially purified from Candida guilliermondii. Among the substrates tested, putrescine has the highest reaction rate, followed by spermidine and cadaverine. The K _IN values for putrescine, spermidine, and cadaverine were 20, 200, and 1.1 mM, respectively. The optimum pH and the temperature for PO were 8.0 and 37°C, respectively. Growth of Candida species on putrescine as the solenitrogen source induced the synthesis of PO that converts putrescine into Δ¹-pyrroline and γ-aminobutyric acid. These two products were detected and identified from the culture medium. The enzyme was not activated by divalent cations. Among the species of Candida tested, the highest enzyme activity was found in cell-free extracts of C. guilliermondii. The pathway of putrescine degradation was identified by substrate analysis to be along the nonacetylated pathway in C. guilliermondii.     

Highly Thermostable Xylanase of the Thermophilic Fungus Talaromyces thermophilus: Purification and Characterization

A thermostable xylanase from a newly isolated thermophilic fungus Talaromyces thermophilus was purified and characterized. The enzyme was purified to homogeneity by ammonium sulfate precipitation, diethylaminoethyl cellulose anion exchange chromatography, P-100 gel filtration, and Mono Q chromatography with a 23-fold increase in specific activity and 17.5% recovery. The molecular weight of the xylanase was estimated to be 25kDa by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and gel filtration. The enzyme was highly active over a wide range of pH from 4.0 to 10.0. The relative activities at pH5.0, 9.0, and 10.0 were about 80%, 85.0%, and 60% of that at pH7.5, respectively. The optimum temperature of the purified enzyme was 75°C. The enzyme showed high thermal stability at 50°C (7days) and the half-life of the xylanase at 100°C was 60min. The enzyme was free from cellulase activity. K _m and V _max values at 50°C of the purified enzyme for birchwood xylan were 22.51mg/ml and 1.235μmol min⁻¹ mg⁻¹, respectively. The enzyme was activated by Ag⁺, Co²⁺, and Cu²⁺; on the other hand, Hg²⁺, Ba²⁺, and Mn²⁺ inhibited the enzyme. The present study is among the first works to examine and describe a secreted, cellulase-free, and highly thermostable xylanase from the T. thermophilus fungus whose application as a pre-bleaching aid is of apparent importance for pulp and paper industries.     

Glycosidases of turnip leaf tissues

Four myrosinase (β-thioglucosidase EC. 3.2.3.1) and seven disaccharase (β-fructofuranosidase, EC. 3.2.1.26) isoenzymes were isolated from turnip leaves. The most active enzymes were isolated in pure form. Myrosinase and disaccharase mol wt was 62.0 × 10³ and 69.5 × 10³ dalton, respectively, on the basis of gel filtration on Sephadex G-200. Myrosinase pH profile showed high activity between pH 5 and 7 with the optimum at pH 5.5. The purified enzyme was heat-stable for 60 min at 30°C with only loss of 24% of activity. Its activity is strongly inhibited (100%) by Pb²⁺, Ba²⁺, Cu²⁺ and Ca²⁺ ions, and activated (70%) by EDTA at 0.04M. The pure enzyme failed to hydrolyze amylose, glycogen, lactose, maltose, and sucrose. TheK _m andV _max values of myrosinase using sinigrin as specific substrate was 0.045 mM and 2.5 U, respectively. The maximal activity of disaccharase enzyme was obtained at pH 4–5 and 35–37°C. The enzyme was heat-stable at 30°C for 30 min with only 10% loss of its activity. Its activity is strongly activated (70–240%) by Ca²⁺, Ba²⁺, Cu²⁺, and EDTA at 0.01M. The enzyme activity is specific to the disaccharide sucrose and failed to hydrolyze other disaccharides (maltose and lactose). TheK _m andV _max of disaccharase were 0.123 mM and 3.33 U, respectively.     

Purification, characterization, and structural investigation of a new moderately thermophilic and partially calcium-independent extracellular α-amylase from Bacillus sp. TM1

A new α-amylase was extracted from a recently found strain of Bacillus sp. and purified by ion-exchange chromatography. Sodium dodecyl sulfate polyacrylamide gel electrophoresis showed a single band for the purified enzyme with an apparent molecular weight of 59 kDa. The optimum temperature and pH range of the enzyme were 40–60°C and 4.5–7.5, respectively, and its activation energy was 1.974 kcal/mol. The K _m value for the enzyme activity on solubie starch was 4 mg/mL, and the T _m values obtained from the circular dichroism (CD) results of thermal unfolding were 78.7 and 80.2°C in the absence and presence of the calcium, respectively. The enzyme was almost completely inhibited by the addition of Fe³⁺, Mn²⁺, and Zn²⁺ and was activated by EDTA, Cr³⁺, and Al³⁺. Moreover, it was partially inhibited by Ca²⁺, Ba²⁺, Ni²⁺, and Co²⁺. Proteolytic digestion of the enzyme using trypsin combined with results from T _m using CD and irreversible thermoinactivation suggests that this enzyme can be considered a moderate thermophile with both mild flexibility and rigidity.     

Purification and properties of uricase fromCandida sp. and its application in uric acid analysis in serum

The purification of uricase fromCandida sp. was carried out by precipitation with ammonium sulfate then further proceeded with Sephadex G200, and DEAE-cellulose DE52 chromatographies. The specific activity of the enzyme was enhanced from 0.05-12 (U/mg protein). The purity of the enzyme was judged to be homogeneous by SDS-PAGE. Some of the general properties of enzyme were investigated. The optimum reaction pH and temperature were 8.5 and 30‡C, respectively. The enzyme was stable at a pH range from 8.5-9.5 and at temperatures lower than 35‡C. The apparentK _m value of the enzyme was calculated to be about 5.26 x 10^-6 mol/L. The molecular weight was determined to be 70,000-76,000 by the gel filtration and SDS-PAGE techniques. The isoelectric point was determined to be pH 5.6. The effects of some metallic ions on enzyme activity and stability were discussed. The partial purified uricase was used in serum uric acid determination. The within-batch imprecision percentage ranged from 2.16-2.63 and the between-batch imprecision percentage ranged from 2.4-3.6. The recovery ratio were from 96–101%. The correlation among this method and Boehringer, Roche, or Biotrol enzymatic kits were Y = 1.086x - 0.50 (r = 0.981),Ya = 0.959x - 0.29 (r = 0.97), andYb = l.ll0x - 0.45(r = 0.956), respectively. A linear calibration curve was obtained at 2.5-15 mg/dL uric acid. The stability of reagents and the effects of some substances in serum were also surveyed.     

Purification, characterization, kinetic properties, and thermal behavior of extracellular polygalacturonase produced by filamentous fungus Tetracoccosporium sp

For the first time, a polygalacturonase from the culture broth of Tetracoccosporium sp. was isolated and incubated at 30°C in an orbital shaker at 160 rpm for 48h. The enzyme was purified by ammonium sulfate precipitation and two-step ion-exchange chromatography and had an apparent molecular mass of 36 kDa, as shown by sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis. Its optimum activity was at pH 4.3 and 40°C, and the K _m and V _max values of this enzyme (for polygalacturonic acid) were 3.23 mg/mL and 0.15 μmol/min, respectively. Ag⁺, Co²⁺, EDTA, Tween-20, Tween-80, and Triton X-100 stimulated polygalacturonase activity whereas Al³⁺, Ba²⁺, Ca²⁺, Fe²⁺, Fe³⁺, Ni²⁺, Mg²⁺, Mn²⁺, and SDS inhibited it. In addition, iodoacetamide and iodoacetic acid did not inhibit enzyme activity at a concentration of 1 mM, indicating that cysteine residues are not part of the catalytic site of polygalacturonase. We studied the kinetic properties and thermal inactivation of polygalacturonase. This enzyme exhibited a t _1/2 of 63 min at 60°C and its specific activity, turnover number, and catalytic efficiency were 6.17 U/mg, 113.64 min⁻¹, and 35.18 mL/(min·mg), respectively. The activation energy (ΔE ^#) for heat inactivation was 5.341 kJ/mol, and the thermodynamic activation parameters ΔG ^#, ΔH ^#, and ΔS ^# were also calculated, revealing a potential application for the industry.     

Purification and Characterization of Thermostable Chitinase from <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> SK-1

Chitinase was purified from the culture medium of Bacillus licheniformis SK-1 by colloidal chitin affinity adsorption followed by diethylamino ethanol-cellulose column chromatography. The purified enzyme showed a single band on sodium dodecyl sulfate polyacrylamide gel electrophoresis. The molecular size and pI of chitinase 72 (Chi72) were 72 kDa and 4.62 (Chi72) kDa, respectively. The purified chitinase revealed two activity optima at pH 6 and 8 when colloidal chitin was used as substrate. The enzyme exhibited activity in broad temperature range, from 40 to 70°C, with optimum at 55°C. It was stable for 2 h at temperatures below 60°C and stable over a broad pH range of 4.0–9.0 for 24 h. The apparent K _m and V _max of Chi72 for colloidal chitin were 0.23 mg ml⁻¹ and 7.03 U/mg, respectively. The chitinase activity was high on colloidal chitin, regenerated chitin, partially N-acetylated chitin, and chitosan. N-bromosuccinamide completely inhibited the enzyme activity. This enzyme should be a good candidate for applications in the recycling of chitin waste.     

Cloning, heterologous expression, and characterization of Thielavia terrestris glucoamylase

Thielavia terrestris is a soil-borne thermophilic fungus whose molecular/cellular biology is poorly understood. Only a few genes have been cloned from the Thielavia genus. We detected an extracellular glucoamylase in culture filtrates of T. terrestris and cloned the corresponding glaA gene. The coding region contains five introns. Based on the amino acid sequence, the glucoamylase was 65% identical to Neurospora crassa glucoamylase. Sequence comparisons suggested that the enzyme belongs to the glycosyl hydrolase family 15. The T. terrestris glaA gene was expressed in Aspergillus oryzae under the control of an A. oryzae α-amylase promoter and an Aspergillus niger glucoamylase terminator. The 75-kDa recombinant glucoamylase showed a specific activity of 2.8 μmol/(min·mg) with maltose as substrate. With maltotriose as a substrate, the enzyme had an optimum pH of 4.0 and an optimum temperature of 60°C. The enzyme was stable at 60°C for 30 min. The K _m and k _cat of the enzyme for maltotriose were determined at various pHs and temperatures. At 20°C and pH 4.0, the enzyme had a K _m of 0.33±0.07 mM and a k _cat of (5.5±0.5)×10³ min⁻¹ for maltotriose. The temperature dependence of k _cat /K _m indicated an activation free energy of 2.8 kJ/mol across the range of 20–70°C. Overall, the enzyme derived from the thermophilic fungus exhibited properties comparable with that of its homolog derived from mesophilic fungi.     

Characterization of Cyclodextrin Glucanotransferase Produced by <Emphasis Type="Italic">Bacillus megaterium</Emphasis>

Cyclodextrin glucanotransferase, produced by Bacillus megaterium, was characterized, and the biochemical properties of the purified enzyme were determined. The substrate specificity of the enzyme was tested with different α-1,4-glucans. Cyclodextrin glucanotransferase displayed maximum activity in the case of soluble starch, with a K _m value of 3.4 g/L. The optimal pH and temperature values for the cyclization reaction were 7.2 and 60 °C, respectively. The enzyme was stable at pH 6.0–10.5 and 30 °C. The enzyme activity was activated by Sr²⁺, Mg²⁺, Co²⁺, Mn²⁺, and Cu²⁺, and it was inhibited by Zn²⁺and Ag⁺. The molecular mass of cyclodextrin glucanotransferase was established to be 73,400 Da by sodium dodecyl sulfate–polyacrylamide gel electrophoresis, 68,200 Da by gel chromatography, and 75,000 Da by mass spectrometry. The monomer form of the enzyme was confirmed by the analysis of the N-terminal amino acid sequence. Cyclodextrin glucanotransferase formed all three types of cyclodextrins, but the predominant product was β-cyclodextrin.     

Biochemical and enzymatic properties of a novel marine fibrinolytic enzyme from <Emphasis Type="Italic">Urechis unicinctus</Emphasis>

A novel potent protease, Urechis unicinctus fibrinolytic enzyme (UFE), was first discovered by our laboratory. In this study, we further investigated the enzymatic properties and dynamic parameters of UFE. As a low molecular weight protein, UFE appeared to be very stable to heat and pH. When the temperature was <50°C, the remnant enzyme activity remained almost unchanged, but when the temperature was raised to 60#x00B0;C the remnant enzyme activity began to decrease rapidly. UFE was quite stable in a pH range of 3.0–12.0, especially at slightly alkaline pH values. Mn²⁺, Cu²⁺, and Fe²⁺ ions were activators of UFE, whereas Fe³⁺ and Ag⁺ ions were inhibitors. Fe²⁺ ion along with Fe³⁺ ion might regulate UFE activity in vivo. The optimum pH and temperature of UFE were about 8.0 and 50°C, respectively. When using casein as substrate and a substrate concentration <0.1% casein (w/v), the reaction velocity was increased with substrate concentration. Also when using casein as substrate, the determined K _m and V _max of UFE were 0.5298 mg/mL and 3.0845 mol of l-tyrosine equivalent, respectively. Our systematic research results are significant when UFE is applied for medical and industrial purposes.     

Purification and Characterization of a Hyperthermostable and High Maltogenic α-Amylase of an Extreme Thermophile <Emphasis Type="Italic">Geobacillus thermoleovorans</Emphasis>

The purified α-amylase of Geobacillus thermoleovorans had a molecular mass of 26 kDa with a pI of 5.4, and it was optimally active at 100 °C and pH 8.0. The T _1/2 of α-amylase at 100 °C increased from 3.6 to 5.6 h in the presence of cholic acid. The activation energy and temperature quotient (Q ₁₀) of the enzyme were 84.10 kJ/mol and 1.31, respectively. The activity of the enzyme was enhanced strongly by Co²⁺ and Fe²⁺; enhanced slightly by Ba²⁺, Mn²⁺, Ni²⁺, and Mg²⁺; inhibited strongly by Sn²⁺, Hg²⁺, and Pb²⁺, and inhibited slightly by EDTA, phenyl methyl sulfonyl fluoride, N-ethylmaleimide, and dithiothreitol. The enzyme activity was not affected by Ca²⁺ and ethylene glycol-bis (β-amino ethyl ether)-N,N,N,N-tetra acetic acid. Among different additives and detergents, polyethylene glycol 8000 and Tween 20, 40, and 80 stabilized the enzyme activity, whereas Triton X-100, glycerol, glycine, dextrin, and sodium dodecyl sulfate inhibited to a varied extent. α-Amylase exhibited activity on several starch substrates and their derivatives. The K _m and K _cat values (soluble starch) were 1.10 mg/ml and 5.9 × 10³ /min, respectively. The enzyme hydrolyzed raw starch of pearl millet (Pennisetum typhoides) efficiently.     

A Laccase of <Emphasis Type="Italic">Fomes durissimus</Emphasis> MTCC-1173 and Its Role in the Conversion of Methylbenzene to Benzaldehyde

A laccase has been purified from the liquid culture growth medium containing bagasse particles of Fomes durissimus. The method involved concentration of the culture filtrate by ultrafiltration and anion exchange chromatography on diethyl aminoethyl cellulose. The sodium dodecyl sulphate–polyacrylamide gel electrophoresis (SDS-PAGE) and native polyacrylamide gel electrophoresis both gave single protein band indicating that the enzyme preparation was pure. The molecular mass of the purified laccase determined from SDS-PAGE analysis was 75 kDa. Using 2,6-dimethoxyphenol as the substrate, the determined K _m and k _cat values of the laccase are 182 μM and 0.35 s⁻¹, respectively, giving a k _cat/K _m value of 1.92 × 10³ M⁻¹ s⁻¹. The pH and temperature optimum were 4.0 and 35 °C, respectively. The purified laccase has yellow colour and does not show absorption band around 610 nm found in blue laccases. Moreover, it transformed methylbenzene to benzaldehyde in the absence of mediator molecules, property exhibited by yellow laccases.     

Characterization of a Thermostable Family 1 Glycosyl Hydrolase Enzyme from <Emphasis Type="Italic">Putranjiva roxburghii</Emphasis> Seeds

A 66-kDa thermostable family 1 Glycosyl Hydrolase (GH1) enzyme with β-glucosidase and β-galactosidase activities was purified to homogeneity from the seeds of Putranjiva roxburghii belonging to Euphorbiaceae family. N-terminal and partial internal amino acid sequences showed significant resemblance to plant GH1 enzymes. Kinetic studies showed that enzyme hydrolyzed p-nitrophenyl β-d-glucopyranoside (pNP-Glc) with higher efficiency (K _cat/K _m = 2.27 × 10⁴ M⁻¹ s⁻¹) as compared to p-nitrophenyl β-d-galactopyranoside (pNP-Gal; K _cat/K _m = 1.15 × 10⁴ M⁻¹ s⁻¹). The optimum pH for β-galactosidase activity was 4.8 and 4.4 in citrate phosphate and acetate buffers respectively, while for β-glucosidase it was 4.6 in both buffers. The activation energy was found to be 10.6 kcal/mol in the temperature range 30–65 °C. The enzyme showed maximum activity at 65 °C with half life of ~40 min and first-order rate constant of 0.0172 min⁻¹. Far-UV CD spectra of enzyme exhibited α, β pattern at room temperature at pH 8.0. This thermostable enzyme with dual specificity and higher catalytic efficiency can be utilized for different commercial applications.     

Isolation,Purification and Characterisation of Low Molecular Weight Xylanase from <Emphasis Type="Italic">Bacillus pumilus</Emphasis> SSP-34

Low molecular weight endo-xylanase from Bacillus pumilus SSP-34 was purified to homogeneity using ion exchange and size exclusion chromatographies. Xylanases were isolated by novel purification protocol which includes the use of anion exchange matrix such as DEAE Sepharose CL 6B with less affinity towards enzyme protein. The purified B. pumilus SSP-34 have a molecular weight of 20 kDa, with optimum pH and temperature at 6.0 and 50 °C, respectively. The enzyme was stable at 50 °C for 30 min. It showed remarkable stability at pH values ranging from 4.5 to 9 when the reaction was carried out at 50 °C. K _m and V _max values, determined with oats spelts xylan were 6.5 mg ml⁻¹ and 1,233 μmol min⁻¹ mg⁻¹ protein, respectively, and the specific activity was 1,723 U mg⁻¹     

A Moderately Thermostable Alkaline Phosphatase from Geobacillus thermodenitrificans T2: Cloning, Expression and Biochemical Characterization

A gene-encoding alkaline phosphatase (AP) from thermophilic Geobacillus thermodenitrificans T2, termed Gtd AP, was cloned and sequenced. The deduced Gtd AP protein comprises 424 amino acids and shares a low homology with other known AP (<35% identity), while it exhibits the conservation of the active site and structure element of Escherichia coli AP. The Gtd AP protein, without a predicted signal peptide of 30 amino acids, was successfully overexpressed in E. coli and purified as a hexa-His-tagged fusion protein. The pH and temperature optima for purified enzyme are 9.0 and 65 °C, respectively. The enzyme retained a high activity at 45–60 °C, while it could be quickly inactivated by a heat treatment at 80 °C for 15 min, exhibiting a half-life of 8 min at 70 °C. The K _m and V _max for pNPP were determined to be 31.5 μM and 430 μM/min at optimal conditions. A divalent cation is essential, with a combination of Mg²⁺ and Co²⁺ or Zn²⁺ preferred. The enzyme was strongly inhibited by 10 mM ethylenediaminetetraacetic acid (EDTA) and vanadate but highly resistant to urea and dithiothreitol. The properties of Gtd AP make it suitable for application in molecular cloning or amplification.     

Purification and Biochemical Characterization of a Highly Thermostable Xylanase from <Emphasis Type="Italic">Actinomadura</Emphasis> sp. Strain Cpt20 Isolated from Poultry Compost

An extracellular thermostable xylanase from a newly isolated thermophilic Actinomadura sp. strain Cpt20 was purified and characterized. Based on matrix-assisted laser desorption–ionization time-of-flight mass spectrometry analysis, the purified enzyme is a monomer with a molecular mass of 20,110.13 Da. The 19 residue N-terminal sequence of the enzyme showed 84% homology with those of actinomycete endoxylanases. The optimum pH and temperature values for xylanase activity were pH 10 and 80 °C, respectively. This xylanase was stable within a pH range of 5–10 and up to a temperature of 90 °C. It showed high thermostability at 60 °C for 5 days and half-life times at 90 °C and 100 °C were 2 and 1 h, respectively. The xylanase was specific for xylans, showing higher specific activity on soluble oat-spelt xylan followed by beechwood xylan. This enzyme obeyed the Michaelis–Menten kinetics, with the K _m and k _cat values being 1.55 mg soluble oat-spelt xylan/ml and 388 min⁻¹, respectively. While the xylanase from Actinomadura sp. Cpt20 was activated by Mn²⁺, Ca²⁺, and Cu²⁺, it was, strongly inhibited by Hg²⁺, Zn²⁺, and Ba²⁺. These properties make this enzyme a potential candidate for future use in biotechnological applications particularly in the pulp and paper industry.     

Immobilization of Xylanase from <Emphasis Type="Italic">Bacillus pumilus</Emphasis> Strain MK001 and its Application in Production of Xylo-oligosaccharides

Xylanase from Bacillus pumilus strain MK001 was immobilized on different matrices following varied immobilization methods. Entrapment using gelatin (GE) (40.0%), physical adsorption on chitin (CH) (35.0%), ionic binding with Q-sepharose (Q-S) (45.0%), and covalent binding with HP-20 beads (42.0%) showed the maximum xylanase immobilization efficiency. The optimum pH of immobilized xylanase shifted up to 1.0 unit (pH 7.0) as compared to free enzyme (pH 6.0). The immobilized xylanase exhibited higher pH stability (up to 28.0%) in the alkaline pH range (7.0–10.0) as compared to free enzyme. Optimum temperature of immobilized xylanase was observed to be 8 °C higher (68.0 °C) than free enzyme (60.0 °C). The free xylanase retained 50.0% activity, whereas xylanase immobilized on HP-20, Q-S, CH, and GE retained 68.0, 64.0, 58.0, and 57.0% residual activity, respectively, after 3 h of incubation at 80.0 °C. The immobilized xylanase registered marginal increase and decrease in K _m and V _max values, respectively, as compared to free enzyme. The immobilized xylanase retained up to 70.0% of its initial hydrolysis activity after seven enzyme reaction cycles. The immobilized xylanase was found to produce higher levels of high-quality xylo-oligosaccharides from birchwood xylan, indicating its potential in the nutraceutical industry.     

Recombination System Based on Cre α Complementation and Leucine Zipper Fusions

A gene encoding β-1,3-1,4-glucanase was cloned by polymerase chain reaction (PCR) from Bacillus subtilis MA139. Sequencing result showed 97% homology to the corresponding gene from Bacillus licheniformis. The open reading frame (ORF) of the gene contained 690 bp coding for a 226 amino-acid matured protein with the estimated molecular weight of 24.44 kDa. The β-1,3-1,4-glucanase gene was subcloned into an expression vector of pET28a and expressed in Escherichia coli BL21 and then purified by metal affinity chromatography using a nickel–nitrilotriacetic acid (Ni–NTA) column. The purified β-1,3-1,4-glucanase demonstrated 24.05 and 12.52 U ml^-1 activities for the substrates of barley β-glucan and lichenan, respectively, and the specific activities were 728.79 and 379.1 U mg^-1 for them, respectively. The optimal temperature and pH of the purified enzyme were 40°C and 6.4, respectively. When barley β-glucan was used as the substrate, K _m was 5.34 mg ml^-1, and K _cat showed 7,206.71 S^-1, thus the ratio of K _cat and K _m was 1,349.67 ml s^-1 mg^-1. The activity of β-1,3-1,4-glucanase was affected by a range of metal ions or ethylenediaminetetraacetic acid (EDTA).