The supramolecular structure of ultrafiltration membranes synthesized by electropolymerization

The structure and morphology of polyacrylamide-formaldehyde ultrafiltration membranes synthesized by electropolymerization of monomers have been investigated by scanning electron microscopy and scanning tunneling microscopy. The conclusion is that the polymeric film consists of crystalline and amorphous phases. Spherulites occur throughout the entire thickness of the membrane matrix and make the whole structure rigid. The amorphous phase is penetrated by pores directed perpendicularly to the membrane surface. The membranes have an anisotropic sandwich structure with the selective layer formed on the side of the polymer film facing the electrode.     

Surface-initiated atom transfer radical polymerization on poly(vinylidene fluoride) membrane for antibacterial ability

Surface-active microporous membranes were prepared from the poly(vinylidene fluoride)-graft-poly(2-(2-bromoisobutyryloxy)ethyl acrylate) copolymer (PVDF-g-PBIEA copolymer) by phase inversion in water. The PBIEA side chains could function as initiators for the atom transfer radical polymerization (ATRP) of 2-(N,N-dimethylamino)ethyl methacrylate on the membrane surfaces to give rise to the PVDF-g-PBIEA-ar-PDMAEMA membranes. N-alkylation with hexyl bromide and nitromethane gave rise to the quanternized PVDF-g-PBIEA-ar-QPDMAEMA membranes with polycation chains chemically tethered on the membrane surface, including the pore surfaces. The changes in the surface morphology and the surface chemical composition were confirmed by scanning electron microscopy and X-ray photoelectron spectroscopy. The scanning electron microscopy revealed that, in comparison to the pristine PVDF-g-PBIEA membranes, not only could the PVDF-g-PBIEA-ar-QPDMAEMA membranes remove the Gram-negative bacterium Escherichia coli but also inhibited the bacterial reproduction on the membranes to a significant extent.     

Structural characterization of catalytically active metal clusters in polymer membranes

Metal clusters were generated and stabilized in pore free, mechanically stable poly(amide imide) (PAI) polymer membranes in high dispersion and high concentration of typically 15wt-%. These membranes have been successfully tested for catalytic applications. Pure Pd-loaded and bimetallic Pd/Ag, Pd/Cu, Pd/Co, Pd/Pb PAI films were investigated by means of x-ray absorption spectroscopy, small and wide angle x-ray scattering and transmission electron microscopy to characterize the structure of the metal clusters in the protective polymer. The measurements consistently show a homogeneous distribution of metallic nanoclusters of 10–30 Å size within the membranes. Also, a smaller amount of larger aggregates up to 300 Å is observed in most of the films. The precise cluster size distribution critically depends on the solvents used as well as on other preparation parameters such as the stirring time of the metal precursor/polymer solution. In case of Pd/Ag and Pd/Pb bimetallic films no clear evidence for the formation of bimetallic clusters in the membrane, i.e. alloying of both metal components, is found. In Pd/Cu and Pd/Co membranes, chlorine from CuCl₂ and CoCl₂ precursors reacts with Pd which may influence the Pd catalytic behavior. Reduction and oxidation of the metal nanoclusters is quantitatively studied by means of x-ray absorption spectroscopy. Membrane properties are discussed with respect to catalytic applications.     

Characterization of the novel ETFE-based membrane

Recently developed ETFE-SA membrane (sulphonated poly(ethylene-alt-tetrafluoroethylene)) has proved to be chemically stable in the direct methanol fuel cell (DMFC). According to methanol permeability measurements, the MeOH permeability through the ETFE-SA membrane is less than 2% of the corresponding value of the Nafion^® membranes. The characterization of the ETFE-SA membranes is done with sophisticated microscopy techniques. The electrochemical inhomogeneity of the membranes is investigated with the scanning electrochemical microscopy (SECM) by mapping proton distribution across the membrane surface. The atomic force microscopy (AFM) is used, when the surface morphology and morphology changes originating from swelling are investigated, while with the scanning electron microscopy (SEM), the composition and the structure of the membranes can be clarified in detail. The sulphur profile along the membrane cross-section gives information about the distribution of sulphonic acid groups and it is detected with the SEM combined with a energy dispersive X-ray spectrometer. Surface hydrophobicity is investigated by water contact angle (CA) measurement. Many remarkable structural differences between different samples are observed during the measurements, e.g. the surface roughness of the ETFE-SA membrane is much higher, when compared to the Nafion^® membranes. Altogether, the surface properties of the ETFE-SA and the Nafion^® membranes are found to differ significantly from each other and the properties of ETFE-SA vary also as a function of manufacturing parameters.     

Novel nylon-supported organic-inorganic hybrid membrane with hierarchical pores as a potential immobilized metal affinity adsorbent

Chitosan-based porous organic-inorganic hybrid membranes supported by microfiltration nylon membranes were prepared, in which gamma-glycidoxypropyltrimethoxysilane (GPTMS) was used as an inorganic source as well as crosslinking reagent. Polyethylene glycol (PEG) with different molecular weight and content was used as imprinting molecule for morphology control. In situ crosslinking of chitosan and simultaneous polymerization of GPTMS in PEG template environment endowed the hybrid membrane with specific characteristics. Distinct hybrid effect between chitosan (CS) and GPTMS was revealed by shifting in X-ray diffraction (XRD) pattern, decomposition in simultaneous thermogravimetry and differential scanning calorimetry (TG/DSC) testing. As manifested by scanning electron microscopy (SEM), the molecular weight and content of PEG had remarkable effect on the resulting surface morphology of the hybrid membrane and a given surface morphology could be obtained by extracting of the imprinted PEG molecular. Among three types of porogen used: PEG 400, PEG 4000 and PEG 20000, only PEG 20000 could result in a porous surface. Moreover, a special porous surface with three-dimensional (3D) hierarchical structure-in-structure pore fashion was obtained when content of PEG 20000 was controlled at 15%. Experimental results also showed that the hybrid membrane had low swelling ratio and high stability in acidic solution. After conveniently coordinated with copper ions, the porous metal chelating hybrid membrane could effectively adsorb the model protein, bovine serum albumin (BSA). As expected, the hybrid membrane imprinted with 15% PEG 20000 had remarkably high copper ion binding and BSA adsorption capacity, which might result from the large surface area, high ligand density and suitable interconnected 3D hierarchical porous surface.     

Morphology and electronic structure of gold clusters on graphite: Scanning-tunneling techniques and photoemission

We present an experimental study for the geometric and electronic properties of gold clusters grown in nanometer sized pits on graphite in a broad size range from a few ten to more than 10⁴ atoms per cluster. The growth process and the morphology were characterized in detail with scanning tunneling microscopy, transmission electron microscopy and ultraviolet photoelectron spectroscopy (UPS). The size-dependent quantized electronic structure detected with scanning tunneling spectroscopy (STS) for small gold clusters with a few ten up to about 10⁴ atoms per cluster is discussed qualitatively in terms of simple models. For the specific case of the confined Shockley surface state on the top (1 1 1) facets of large gold clusters with more than 10⁴ atoms per cluster we were able to detect the quantized electronic structure with both techniques, STS and UPS. The analysis shows a quantitative agreement between the density of states extracted from the STS spectra by averaging over the cluster size-distribution, and UPS after a deconvolution of the dynamic final state effect, which leads to a systematic asymmetric broadening of all spectral features. These results for the model system of gold clusters on graphite highlight general features of the cluster–surface system and they demonstrate the consistent combination of STS and UPS for the study of clusters on surfaces.     

Tailoring Morphology of PVDF-HFP Membrane via One-step Reactive Vapor Induced Phase Separation for Efficient Oil-Water Separation

Poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP) receives increasing attention in membrane separation field based on its advantages such as high mechanical strength, thermal and chemical stability. However, controlling the microporous structure is still challenging.In this work, we attempted to tailor the morphology of PVDF-HFP membrane via a one-step reactive vapor induced phase separation method.Namely, PVDF-HFP was dissolved in a volatile solvent and then was cast in an ammonia water vapor atmosphere. After complete evaporation of solvent, membranes with adjustable porous structure were prepared, and the microstructures of the membranes were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and X-ray diffraction characterizations. Based on the results, a mechanism of dehydrofluorination induced cross-linking of PVDF-HFP has been suggested to understand the morphology tailoring.To our knowledge, this is the first report of one-step reactive vapor induced phase separation strategy to tailor morphology of PVDF-HFP membrane. In addition, the membranes prepared in the ammonia water vapor exhibited enhanced mechanical strength and achieved satisfactory separation efficiency for water-in-oil emulsions, suggesting promising potential.     

Divalent cation-induced cluster formation by polyphosphoinositides in model membranes

Polyphosphoinositides (PPIs) and in particular phosphatidylinositol-(4,5)-bisphosphate (PI4,5P2), control many cellular events and bind with variable levels of specificity to hundreds of intracellular proteins in vitro. The much more restricted targeting of proteins to PPIs in cell membranes is thought to result in part from the formation of spatially distinct PIP2 pools, but the mechanisms that cause formation and maintenance of PIP2 clusters are still under debate. The hypothesis that PIP2 forms submicrometer-sized clusters in the membrane by electrostatic interactions with intracellular divalent cations is tested here using lipid monolayer and bilayer model membranes. Competitive binding between Ca(2+) and Mg(2+) to PIP2 is quantified by surface pressure measurements and analyzed by a Langmuir competitive adsorption model. The physical chemical differences among three PIP2 isomers are also investigated. Addition of Ca(2+) but not Mg(2+), Zn(2+), or polyamines to PIP2-containing monolayers induces surface pressure drops coincident with the formation of PIP2 clusters visualized by fluorescence, atomic force, and electron microscopy. Studies of bilayer membranes using steady-state probe-partitioning fluorescence resonance energy transfer (SP-FRET) and fluorescence correlation spectroscopy (FCS) also reveal divalent metal ion (Me(2+))-induced cluster formation or diffusion retardation, which follows the trend: Ca(2+) ? Mg(2+) > Zn(2+), and polyamines have minimal effects. These results suggest that divalent metal ions have substantial effects on PIP2 lateral organization at physiological concentrations, and local fluxes in their cytoplasmic levels can contribute to regulating protein-PIP2 interactions.     

Properties of poly(<Emphasis Type="Italic">γ</Emphasis>-benzyl <Emphasis Type="SmallCaps">l</Emphasis>-glutamate) membrane modified by polyurethane containing carboxyl group

A series of poly(γ-benzyl l-glutamate) (PBLG)/polyurethane (PU) containing carboxyl group blend membranes was prepared by casting the polymer blend solution in dimethylformamide (DMF). The surface morphology of the PBLG/PU blend membranes was investigated by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Thermal, mechanical, and chemical properties of PBLG/PU blend membranes were studied by differential scanning calorimetry (DSC), tensile tests and other physical methods. It was revealed that the introduction of PU could exert outstanding effects on the morphology and the properties of PBLG membrane.     

Effect of amino acid sorption on formation of water clusters in ion-exchange membranes

The average size and number of water clusters inside ion-exchange membranes are calculated from experimental isotherms of water vapor sorption as a result of considering the sorption in terms of the clusterization theory. It is established that, in MK-40 heterogeneous cation-exchange membrane, water clusters are not formed, while, inside MF-4SK perfluorinated homogeneous membrane, intense cluster formation takes place. The effect of amino acid sorption on cluster water is considered. An increase in the membrane hydrophobicity as a result of the incorporation of amino acid ions leads to prevailing interaction of water molecules with one another rather than with the polymer phase, which is evident from an enlargement of water clusters.     

Preparation and characterization of modified polyphenylsulfone membranes with hydrophilic property for filtration of aqueous media

In the present research, the low water flux of polyphenylsulfone membranes was addressed, and a novel improvement in their water permeation and fouling resistance was achieved using polyethylene glycol (PEG) as the hydrophilic additive. Scanning electron microscopy and field emission scanning electron microscopy, atomic force microscopy, attenuated total reflection Fourier‐transform infrared spectroscopy, thermogravimetric analysis, and tensile test were applied for the investigation of membrane morphology, surface topography, surface chemical structure, thermal stability, and mechanical properties, respectively. Moreover, the relative hydrophilicity/hydrophobicity of the membranes was assessed via determination of membrane water uptake capacity and water contact angle. The membrane performance was studied and compared by determination of pure water flux and filtration of canned beans production wastewater as well as bovine serum albumin solution. The filtration results indicated a remarkable pure water flux and 100% turbidity rejection provided by the polyphenylsulfone/PEG 20 000 membrane. In addition, it was confirmed that the amount of residual PEG within the membrane was increased with increasing PEG molecular weight and concentration.     

不锈钢金属网支撑的X型沸石膜的制备与表征

以不锈钢金属网为载体, 采用预涂晶种的二次生长法, 在水热条件下制备了连续、无明显缺陷的X型分子筛膜. 考察了反应物中水的含量、碱度、硅铝比和反应时间等制备条件对形成X型分子筛膜的影响, 优化了X型分子筛膜的制备条件, 利用扫描电子显微镜(SEM)对不同反应条件下制备的X型分子筛膜的形貌进行了观察, 并对结果进行了分析.     

Dynamics of vesicle self-assembly and dissolution

The dynamics of membranes is studied on the basis of a particle-based meshless surface model, which was introduced earlier [Phys. Rev. E 73, 021903 (2006)]. The model describes fluid membranes with bending energy and-in the case of membranes with boundaries-line tension. The effects of hydrodynamic interactions are investigated by comparing Brownian dynamics with a particle-based mesoscale solvent simulation (multiparticle collision dynamics). Particles self-assemble into vesicles via disk-shaped membrane patches. The time evolution of assembly is found to consist of three steps: particle assembly into discoidal clusters, aggregation of clusters into larger membrane patches, and finally vesicle formation. The time dependence of the cluster distribution and the mean cluster size is evaluated and compared with the predictions of Smoluchowski rate equations. On the other hand, when the line tension is suddenly decreased (or the temperature is increased), vesicles dissolve via pore formation in the membrane. Hydrodynamic interactions are found to speed up the dynamics in both cases. Furthermore, hydrodynamics makes vesicle more spherical in the membrane-closure process.     

Bilayers and interdigitation in block copolymer vesicles

Amphiphilic block copolyethers assemble into membranes with thickness between 2.4 and 7.5 nm. The vesicular morphology has been confirmed by small-angle X-ray scattering combined with electron microscopy for diblock copolymers and triblock copolymers of both architectures. The scaling of the membrane thicknesses with the length of the hydrophobic block is in good agreement with the strong segregation theory for block copolymer melts, indicating a mixed and stretched conformation of the hydrophobic chain inside the vesicle membrane. This result is in contrast to previously published results where the hydrophobic membranes were observed to have bilayer geometry and polymer chains that are relatively unperturbed from their ideal Gaussian dimensions.     

Preparation of Thermal-responsive Chitosan-graft-N-isopropylacrylamide Membranes via γ-Ray Irradiation

A novel thermo-sensitive switching membrane has been prepared by radiation-induced simultaneous grafting N-isopropylacrylamide （NIPAAm） onto chitosan membrane. Fourier transform infrared spectroscopy （FTIR） was used to identify the structure of the grafted membranes. The surface morphology of the grafted membrane was observed from scanning electron microscopy （SEM）. Pure water flux measurements showed that water flux of the grafted membrane decreased with the increase of temperature, while that of chitosan membrane was constant. It was proved that grafted membrane was sensitive to temperature.     

Design of efficient methanol impermeable membranes for fuel cell applications

In this paper, the design of efficient composite membranes based on sulfonated polysulfone and acidic silica material with characteristics and properties such as methanol barrier, high proton conductivity and suitable fuel cells performance is presented. A positive influence of nanosized acidic silica powders, used as an additive filler in the preparation of composite membranes, due to an efficient hydrophilic inter-distribution inside the membrane when compared to pure silica, is found. A series of different techniques such as XRF, FT-IR, TGA, DSC, IEC and conductivity measurements are used to highlight the properties of acidic silica material and composite membranes. The composite membrane based on acidic silica (SPSf-SiO(2)-S) shows the lowest crossover current (only 8 mA cm(-2)), which is 43% lower than that of a pure SPSf membrane and 33% lower compared to a composite membrane based on bare silica (SPSf-SiO(2)). These significant differences are attributed to the increasing diffusion path length of MeOH/H(2)O clusters in the composite membranes. The maximum DMFC performance at 30 °C is achieved with the SPSf-SiO(2)-S membrane (23 mW cm(-2)), whereas the MEAs based on SPSf-SiO(2) and pure SPSf membranes reached 21 and 16 mW cm(-2), respectively. These significant results of the composite SPSf-SiO(2)-S membrane are ascribed at a good compromise among high proton conductivity, low swelling and low methanol crossover compared to pure SPSf and (unmodified silica)-SPSf membranes. A preliminary short durability test of 100 h performed in a cell with the composite SPSf-SiO(2)-S membrane shows remarkable performance stability during chrono-voltammetric measurements (60 mA cm(-2)) at 30 °C.     

Immobilization of silver nanoparticles obtained by electric discharge method on a track membrane surface

Composite poly(ethylene terephthalate) track membranes containing immobilized silver nanoparticles with the aim of using them for surface-enhanced Raman scattering spectroscopy have been obtained and studied. A dispersion of negatively charged silver nanoparticles has been synthesizes by the method of pulsed electrical discharge between silver electrodes immersed in distilled water. To ensure the electrostatic deposition of nanoparticles onto the track membrane surface, it has been modified with polyethyleneimine. The composition and morphology of the surface of the obtained composite membranes have been studied by X-ray photoelectron spectroscopy and scanning electron microscopy. Aggregation of nanoparticles on the surface has been analyzed. The coefficient of Raman-scattering enhancement has been determined by the example of rhodamine 6G molecules adsorbed on a membrane with immobilized silver nanoparticles.     

Preparation and characterisation of novel polysulfone membranes modified with Pluronic F-127 for reducing microalgal fouling

In this study, hydrophilic and fouling-resistant polysulfone (PS) membranes were fabricated using the phase inversion method to reduce membrane fouling caused by microalgal culture. The Pluronic F-127 polymer, which is used as a hydrophilic co-polymer, was added to the membranes to improve the membrane properties. Characteristic specifications of the fabricated membranes, such as morphology, surface roughness, chemical structures and hydrophobicity/hydrophilicity, were studied using scanning electron microscopy, atomic force microscopy (AFM), energy-dispersive X-ray spectroscopy (EDS), attenuated total reflection-fourier infrared (ATR-FTIR) spectroscopy and contact angle devices. According to the results obtained, it was observed that, with the increase of the Pluronic F-127 concentration in the membranes, the surface roughness of the membranes decreased and hydrophilicity and permeation fluxes increased notably. Furthermore, it was observed that the addition of the Pluronic F-127 polymer into the membranes reduced reversible/irreversible membrane fouling. Additionally, a characterisation of the fouled membranes was performed for the purpose of comprehensively understanding the membrane fouling mechanism caused by microalgal culture.     

Synthesis and characterization of palladium containing membranes based upon polyacrylic acid

Different methods are described to synthesize a highly porous polymer membrane with fine dispersed metal-nanoparticles. The preparation of the porous catalytic membranes happens by crosslinking of polyacrylic acid dispersions with bifunctional crosslinker in presence of palladium particles. Palladium-nanoparticles, stabilized with the block copolymer polystyrene-block-polyethyleneoxide, can be immobilized in the polymer network in different ways. The polymer/metal network can be prepared in the form of thin flat membranes and dried under retention of the porosity and three-dimensional network structure. Different reduction and preparation methods were applied in order to obtain differences in particle size and distribution of the palladium. The morphology of the material was investigated by scanning electron microscopy. Transmission electron microscopy was employed to show the size and distribution of the metal-nanoparticles in the polymeric matrix. The catalytic activity of the obtained membranes was investigated for the gas phase hydrogenation of cyclohexene and propyne.     

Alteration of the morphology of polyvinylidene fluoride membrane by incorporating MOF-199 nanomaterials for improving water permeation with antifouling and antibacterial property

MOF-199@PVDF composite membranes are prepared by blending with different amounts of ultrasonic synthesized MOF-199 nanomaterials for improving the pure water flux (PWF) and achieving better antifouling and antibacterial performance. The membrane morphology, elemental composition, and surface properties are analyzed by various means of characterizations, including scanning electron microscopy, energy-dispersive X-ray spectroscopy, and water contact angle measurements. The performance of the modified membranes is also determined from the perspective of the PWF, bovine serum albumin rejection, as well as antifouling and antibacterial properties. Due to the variation in the viscosity of dope solution, the composite membranes possess remarkably different morphology, and the M5 membrane, which exhibited a sponge-like structure, the largest surface pore size, and the highest porosity, shows the highest PWF, reaching up to 185.05 L/m²h. Moreover, with the incorporation of MOF-199 nanocrystals, the antifouling property, together with the antibacterial property, toward both gram-negative bacteria and gram-positive bacteria, based on M5 and M7 membranes, increases dramatically compared with the pristine polyvinylidene fluoride membrane. In addition, the long-term permeation performance and copper leakage of the membrane are investigated. As a result, the composite membrane, M5, shows great potential in real water treatment.