Mimicking the atmospheric OH-radical-mediated photooxidation of isoprene: formation of cloud-condensation nuclei polyols monitored by electrospray ionization mass spectrometry

Recently, it has been proposed (M. Claeys et al., Science 2004; 303: 1173) that the atmospheric OH-radical-mediated photooxidation of isoprene is a source of two major secondary organic aerosol (SOA) components, that is, 2-methylthreitol and 2-methylerythritol. These diastereoisomeric tetrols, which were characterized for the first time in the fine size fraction (<2.5 microm aerodynamic diameter) of aerosols collected in the Amazon rain forest during the wet season, were proposed to enhance the capability of the aerosols to act as cloud-condensation nuclei. In the present study, we performed the oxidation of isoprene in aqueous solution under conditions that attempted to mimic atmospheric OH-radical-induced photooxidization, and monitored and characterized on-line the reaction products via electrospray ionization mass (and tandem mass) spectrometry in the negative ion mode. The results show that the reaction of isoprene with photo- or chemically generated hydroxyl radicals indeed yields 2-methyltetrols. Other polyols were also detected, and they may therefore be considered as plausible SOA components eventually formed in normal or more extreme OH-radical-mediated photooxidation of biogenic isoprene.     

Direct detection of isoprene photooxidation products by using synchrotron radiation photoionization mass spectrometry

We report the combination of a vacuum ultraviolet photoionization mass spectrometer, operating on the basis of synchrotron radiation, with an environmental reaction smog chamber for the first time. The gas- and pseudo-particle-phase products of OH-initiated isoprene photooxidation reactions were measured on-line and off-line, respectively, by mass spectrometry. It was observed that aldehydes, methacrolein, methyl vinyl ketone, methelglyoxal, formic acid, and similar compounds are the predominant gas-phase photooxidation products, whereas some multifunctional carbonyls and acids mainly exist in the particle phase. This finding is reasonably consistent with results of studies conducted in other laboratories using different methods. The results indicate that synchrotron radiation photoionization mass spectrometry coupled with a smog chamber is a potentially powerful tool for the study of the mechanism of atmospheric oxidations and the formation of secondary organic aerosols.     

Real-time detection of individual secondary organic aerosol particle from photooxidation of toluene using aerosol time of flight mass spectrometer

Aromatic hydrocarbons are air pollutants in urban atmosphere and mainly from anthropogenic sources, i.e., emission from automotive exhaust and productive process of industry, and they constitute an important fraction of total volatile organic compounds (VOCs). Photochemical ozone and secondary organic aerosols (SOA) could be formed from the photochemical proc- esses of aromatic hydrocarbons. SOA may impact visibility of air, formation of clouds, change of the climate, and human health serio…     

用于研究大气氧化过程和机制的双反应器烟雾箱的评估和应用

设计并搭建了一个新的双反应器烟雾箱, 用于研究可生成臭氧或二次有机气溶胶(SOAs)的大气氧化过程. 该烟雾箱包括一个绝热的箱体及其内部两个体积为5 m³的氟化乙丙烯(FEP)薄膜反应器, 箱内的温度可以精确控制在-10到40 ℃之间. 利用该烟雾箱研究了光源对丙烯气相氧化机理的影响, 发现相对于传统的黑光灯光源, 采用的多重光源所得到的结果可以与模型更好地匹配. 进行了丙烯和间二甲苯的光氧化的初步实验, 发现该烟雾箱可用于模拟可产生臭氧或SOAs的气相氧化过程, 并可以通过不同初始浓度的对比实验找寻不同物种对反应过程的影响. 间二甲苯在不同NO_x条件下光氧化得到的SOA产率与之前的研究比较符合, 这表明该烟雾箱可以实现气-粒转化过程的模拟. 双反应器可以实现在一个关键条件的存在区别, 而其他条件完全一致的情况下的对比实验, 从而帮助我们进一步理解在大气复合污染过程中起关键作用的因素.     

Fragmentation study of diastereoisomeric 2-methyltetrols, oxidation products of isoprene, as their trimethylsilyl ethers, using gas chromatography/ion trap mass spectrometry

The diastereoisomeric 2-methyltetrols, 2-methylthreitol and 2-methylerythritol, were recently reported as major secondary aerosol components in natural forest aerosols and proposed as molecular markers for the photooxidation of isoprene. In this study, we examine the complex electron and methane chemical ionization behaviors of their trimethylsilyl ethers. In order to gain insight into their fragmentation behaviors, threitol and erythritol were studied as model compounds, and deuterium labeling of the trimethylsilyl groups and ion trap MS2 experiments were performed.     

用于大气化学反应和二次有机气溶胶研究的实验室烟雾箱系统的搭建、测试与初步实验

为了从本质上认识和了解大气氧化反应进程以及二次有机气溶胶的形成机制,设计并搭建了一套实验室模拟烟雾箱系统．将质子转移反应质谱、同步辐射光电离质谱及气溶胶激光飞行时间质谱等特色质谱检测系统与烟雾箱结合,用于大气氧化反应气相和粒子相产物的定量与定性分析．通过一系列表征实验获得了该系统的基本参数,如烟雾箱内温度和光强特征,气体化合物和颗粒物的壁损耗速率,零空气的背景反应性及实验结果的可重复性．臭氧氧化α-蒎烯定量化实验和OH启动异戊二烯光氧化反应的定性检测结果进一步表明了该系统能够满足大气化学反应过程中气相和粒子相化学成分的定性分析及二次有机气溶胶的定量化研究的需要.     

Determination of oxygenated compounds in secondary organic aerosol from isoprene and toluene smog chamber experiments

The determination of multifunctional oxygenated compounds in secondary organic aerosols (SOA) usually requires a derivatisation protocol prior to gas chromatography-mass spectrometry analysis (GC-MS). Our proposed protocol, a combination of O-(2,3,4,5,6-pentafluorobenzyl) hydroxylamine (PFBHA) plus diluted N-methyl-N-trimethyl-silyltrifluoroacetamide (MSTFA) without catalyst, has improved the determination of carbonyls, polyhydroxyl-compounds, hydroxyl-carbonyls, hydroxyl-carboxylic acids and di-carboxylic acids. The optimised derivatisation protocol has been successfully used for blanks, standard mixtures and photo-oxidation products from isoprene and toluene generated in a high-volume simulation chamber (European Photoreactor, EUPHORE).

Some previously identified degradation products for isoprene including tetrols such as threitol, erythritol; 2-methyltetrols and 2-methylglyceric acid; and for toluene including nitrophenols, methyl-nitrophenols, benzaldehyde, p-cresol, benzoic acid, glyoxylic acid and methyl-glyoxylic acid, have been identified in our aerosol samples, thus confirming the successful applicability of the proposed derivatisation protocol. Moreover, the reduction of artefacts and enhanced signal-to-noise ratio, have allowed us to extend the number of multifunctional compounds determined. These findings have demonstrated the validity of this analytical strategy, which will contribute to a better understanding of the atmospheric degradation chemistry of biogenic and anthropogenic pollutants.     

Chemical composition of secondary organic aerosol formed from the photooxidation of isoprene

Recent work in our laboratory has shown that the photooxidation of isoprene (2-methyl-1,3-butadiene, C(5)H(8)) leads to the formation of secondary organic aerosol (SOA). In the current study, the chemical composition of SOA from the photooxidation of isoprene over the full range of NO(x) conditions is investigated through a series of controlled laboratory chamber experiments. SOA composition is studied using a wide range of experimental techniques: electrospray ionization-mass spectrometry, matrix-assisted laser desorption ionization-mass spectrometry, high-resolution mass spectrometry, online aerosol mass spectrometry, gas chromatography/mass spectrometry, and an iodometric-spectroscopic method. Oligomerization was observed to be an important SOA formation pathway in all cases; however, the nature of the oligomers depends strongly on the NO(x) level, with acidic products formed under high-NO(x) conditions only. We present, to our knowledge, the first evidence of particle-phase esterification reactions in SOA, where the further oxidation of the isoprene oxidation product methacrolein under high-NO(x) conditions produces polyesters involving 2-methylglyceric acid as a key monomeric unit. These oligomers comprise approximately 22-34% of the high-NO(x) SOA mass. Under low-NO(x) conditions, organic peroxides contribute significantly to the low-NO(x) SOA mass (approximately 61% when SOA forms by nucleation and approximately 25-30% in the presence of seed particles). The contribution of organic peroxides in the SOA decreases with time, indicating photochemical aging. Hemiacetal dimers are found to form from C(5) alkene triols and 2-methyltetrols under low-NO(x) conditions; these compounds are also found in aerosol collected from the Amazonian rainforest, demonstrating the atmospheric relevance of these low-NO(x) chamber experiments.     

Experimental study on synchrotron radiation photoionization of secondary organic aerosol derived from styrene ozonolysis

Secondary organic aerosol (SOA) produced by ozonolysis of styrene and other alkene compounds is a major part of fine particles in urban atmospheres. The atmospheric ozonolysis process of styrene is simulated in a smog chamber, and the formed SOA particles are detected on-line by a synchronous radiation vacuum ultraviolet photoionization mass spectrometer (VUV-PIMS) in this study. Through molecular ion peaks in the photonionization mass spectra of SOA and the corresponding photoionization efficiency curve, combined with off-line measurement verification of ultraviolet visible and infrared absorption spectra, it is determined that formaldehyde, formic acid, benzene, phenol, benzaldehyde, and benzoic acid are the main constituents of styrene SOA. These provide new information for studying the atmospheric ozonolysis oxidation mechanism of styrene. VUV-PIMS can get over complicated sample preparation procedures, secondary pollution, and other shortcomings of the off-line method and is a useful instrument to measure constituents and unveil the formation process of SOA particles.     

Characterization of 2-methylglyceric acid oligomers in secondary organic aerosol formed from the photooxidation of isoprene using trimethylsilylation and gas chromatography/ion trap mass spectrometry

In the present work, we have characterized in detail the chemical structures of secondary organic aerosol (SOA) components that were generated in a smog chamber and result from the photooxidation of isoprene under high-NO(x) conditions typical for a polluted atmosphere. Isoprene high-NO(x) SOA contains 2-methylglyceric acid (2-MG) and oligoester derivatives thereof. Trimethylsilylation, in combination with capillary gas chromatography (GC)/ion trap mass spectrometry (MS) and detailed interpretation of the MS data, allowed structural characterization the polar oxygenated compounds present in isoprene SOA up to 2-MG trimers. GC separation was achieved between 2-MG linear and branched dimers or trimers, as well as between the 2-MG linear dimer and isomeric mono-acetate derivatives thereof. The electron ionization (EI) spectra of the trimethylsilyl derivatives contain a wealth of structural information, including information about the molecular weight (MW), oligoester linkages, terminal carboxylic and hydroxymethyl groups, and esterification sites. Only part of this information can be achieved with a soft ionization technique such as electrospray (ESI) in combination with collision-induced dissociation (CID). The methane chemical ionization (CI) data were used to obtain supporting MW information. Interesting EI spectral differences were observed between the trimethylsilyl derivatives of 2-MG linear and branched dimers or trimers and between 2-MG linear dimer mono-acetate isomers.     

Ion trap mass spectrometry affords advances in the analytical and atmospheric chemistry of 2-hydroxy-2-methylpropanal,a proposed photooxidation product of 2-methyl-3-buten-2-Ol

In the western United States, in areas where emissions of the biogenic hydrocarbon, 2-methyl-3-buten-2-ol (MBO) are high, MBO contributes significantly to the oxidative capacity of the atmosphere. Hydroxyl radical oxidation of MBO can play an important role in forming tropospheric ozone, and MBO reaction products may contribute to the formation of secondary organic aerosols [1-3]. Although 2-hdyroxy-2-methylpropanal was tentatively identified as a product from the reaction of MBO with .OH in indoor chamber studies, the identity of the compound was not confirmed due to the lack of an authentic standard. Further, no data exists on the atmospheric generation and fate of 2-hydroxy-2-methylpropanal in the ambient environment. Herein, we provide further evidence that 2-hydroxy-2-methylpropanal is generated by .OH reaction with MBO by identifying 2-hydroxy-2-methylpropanal in an indoor chamber experiment and in ambient air sampled in the Blodgett Forest, where MBO emissions are high. We analyzed 2-hydroxy-2-methylpropanal by using a method that relies on O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine (PFBHA) and bis-(trimethylsilyl) trifluoroacetamide (BSTFA) derivatization along with ion-trap mass spectrometry. Tentative identification of 2-hydroxy-2-methylpropanal was possible by using knowledge gained in this study regarding the mass spectrometry of PFBHA-BSTFA derivatives of carbonyls with primary, secondary, and tertiary -OH groups, and ado- and keto-acids. The identification was confirmed by comparing the methane CI mass spectra and relative gas chromatographic retention time obtained by analyzing 2-hydroxy-2-methylpropanal in a sample extract and a synthesized authentic standard. Since the standard became available at the end of this study (after all samples were analyzed), we also developed a method for semi-quantification of 2-hydroxy-2-methylpropanal, with a detection limit of 27 pptv in air. We used the method to provide the first ambient air measurements of 2-hydroxy-2-methylpropanal. The analyte is not commercially available, and hence other researchers who have not synthesized an authentic standard can employ the method.     

Development and evaluation of a detailed mechanism for the atmospheric reactions of isoprene and NOx

A detailed photochemical mechanism for the atmospheric reactions of isoprene and its major oxidation products in the presence of NO_x, which incorporates the most recent laboratory results and our current understanding of the system, is described. It is evaluated by comparing its predictions against results of NO_x-air irradiations of isoprene and its two major products, methacrolein, and methyl vinyl ketone (MVK), in five different types of environmental chambers at two different laboratories. In most cases it simulated experimental results within the uncertainty of the data and the chamber and run characterization model. However, the photodecomposition quantum yields of methacrolein and MVK and the organic nitrate yield from the OH + isoprene reaction had to be adjusted to obtain satisfactory simulations of the data. The major discrepancy observed was that the model tended to underpredict PAN by ca. 40% in the isoprene experiments, despite the fact that the model predicted PAN from methacrolein and MVK reasonably well. The uncertainties and additional data needed to completely characterize the isoprene atmospheric photooxidation system are discussed. © 1996 John Wiley & Sons, Inc.     

Determination of molindone enantiomers in human plasma by high-performance liquid chromatography-tandem mass spectrometry using macrocyclic antibiotic chiral stationary phases

A sensitive and selective bioanalytical assay was developed and validated for the determination of enantiomeric molindone in human plasma using high-performance liquid chromatography-tandem mass spectrometry along with supported liquid extraction procedures. The chiral separation was evaluated and optimized on macrocyclic antibiotic type chiral stationary phases (CSPs) based on teicoplanin aglycone (Chirobiotic TAG) in polar organic, polar ionic, and reversed-phase mode chromatography, respectively. Complete baseline separation was achieved on a Chirobiotic TAG column under isocratic condition in reversed-phase chromatography. The method validation was conducted using a Chirobiotic TAG column (100 mm x 2.1 mm) over the curve range 0.100-100 ng/ml for each molindone enantiomer using 0.0500 ml of plasma sample. The flow rate was 0.8 ml/min and the total run time was 9 min. Supported liquid extraction in a 96-well plate format was used for sample preparation. Parameters including recovery, matrix effect, linearity, sensitivity, specificity, carryover, precision, accuracy, dilution integrity, and stability were evaluated. The intra- and inter-day precision and accuracy of the quality control samples at low, medium, and high concentration levels were RSD 相似文献   

Quantitative 1H NMR method for the routine spectroscopic determination of enantiomeric purity of active pharmaceutical ingredients fenfluramine, sertraline, and paroxetine

Determining the enantiomeric purity of chiral therapeutic agents is important in the development of active pharmaceutical ingredients (API). A strategy for determining the enantiomeric purity of three APIs was developed using nuclear magnetic resonance (NMR) and the chiral solvating agent (CSA) 1,1-bi-2-naphthyl (1). While chiral chromatography is widely used to evaluate enantiomeric purity, it can sometimes suffer from tedious sample preparation obviating rapid measurements that are sometimes needed during the manufacture of such agents. The techniques described herein provide comparable enantiomeric purity results with those obtained with traditional chiral HPLC and other published methods for these compounds. Chiral analysis of standard samples of methylbenzylamine enantiomeric mixtures using 1 were found to be quantitative to approximately 1% minor enantiomer. Enantiomeric purity determination by NMR utilizing chiral solvating agents do not require special instrumental techniques, chemical derivatization or standards and is therefore ideally suited for rapid routine analysis. As a result, the technique demonstrated is commonly used in our laboratory as a complementary or alternative method to chiral HPLC or optical rotation measurements for routine determination of enantiomeric purity.     

Characterization of oxygenated derivatives of isoprene related to 2-methyltetrols in Amazonian aerosols using trimethylsilylation and gas chromatography/ion trap mass spectrometry

In the present study, we have tentatively identified the structures of three oxygenated derivatives of isoprene in Amazonian rain forest aerosols as the C(5) alkene triols, 2-methyl-1,3,4-trihydroxy-1-butene (cis and trans) and 3-methyl-2,3,4-trihydroxy-1-butene. The formation of these oxygenated derivatives of isoprene can be explained by acid-catalyzed ring opening of epoxydiol derivatives of isoprene, namely, 1,2-epoxy-2-methyl-3,4-dihydroxybutane and 1,2-dihydroxy-2-methyl-3,4-epoxybutane. The structural proposals of the C(5) alkene triols were based on chemical derivatization reactions and detailed interpretation of electron and chemical ionization mass spectral data, including data obtained from first-order mass spectra, deuterium labeling of the trimethylsilyl methyl groups, and MS(2) ion trap experiments. The characterization of 2-methyl-1,3,4-trihydroxy-1-butene (cis and trans) and 3-methyl-2,3,4-trihydroxy-1-butene in forest aerosols is important from an atmospheric chemistry viewpoint in that these compounds hint at the formation of intermediate isomeric epoxydiol derivatives of isoprene and as such provide mechanistic insights into the formation of the previously reported 2-methyltetrols through photooxidation of isoprene.     

Analysis of derivatized and underivatized theanine enantiomers by high-performance liquid chromatography/atmospheric pressure ionization-mass spectrometry

Theanine, a naturally occurring non-proteinic amino acid found in tea leaves, has demonstrated wide-ranging physiological activity, from lowering blood pressure to enhancing the anti-tumor activity of chemotherapeutic drugs. The chiral nature of theanine suggests that enantiospecificity plays a significant role in its various pharmacological functions. Using the Chirobiotic T (teicoplanin) chiral stationary phase, native and derivatized theanine enantiomers were separated and detected via high-performance liquid chromatography (HPLC) coupled to atmospheric pressure ionization mass spectrometry (API-MS). With the use of flow rates compatible with each ionization source, native theanine standards achieved excellent sensitivity and detection limits (10 ng/mL) for both atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI). Optimum sensitivity and detection limits for derivatized theanine standards were achieved using ESI-MS. The enantiomeric composition of six commercially available L-theanine samples was evaluated using the high-flow APCI-MS method and confirmed with photodiode array detection. Five of the six products contained significant amounts of D-theanine. Only one product, SunTheanine, appeared to contain only the L-theanine enantiomer.     

Determination of aromatic acids and nitrophenols in atmospheric aerosols by capillary electrophoresis

A capillary zone electrophoresis method is developed for the determination of aromatic organic acids and nitrophenols in atmospheric aerosols. The procedure is based on sampling atmospheric particulate matter on quartz fiber filters and the extraction and analysis of the extracts by capillary electrophoresis. Separation conditions are optimized by varying the pH and acetonitrile content of the electrolyte buffer. Separations in a 20% acetonitrile-20 mM borate mixture (pH 9.9) are able to resolve all of the geometric isomers of hydroxybenzoic acid, phthalic acid, benzenetricarboxylic acid, and nitrophenol as well as 1,2,4,5-benzenetricarboxylic acid, m-toluic acid, and sulfosalicylic acid. A buffer consisting of 11% acetonitrile-20 mM borate (pH 9.9) is found to be most suitable for the analysis of atmospheric aerosol samples. Detection limits are in the order of 40 to 130 ng/mL. Intersample migration time reproducibility is generally better than 1.5%, with day-to-day variations under 3%. A general extraction scheme using diethyl ether-HCl in combination with a preconcentration step is developed. Recoveries of spiked standards range from 59% to 102%, with relative standard deviations ranging from 2% to 17% for five determinations. The method is applied towards the analysis of ambient aerosol samples as well as vehicle emission studies with promising results, thus showing it to be a potential complement to already existing methodology for the analysis of organic acids and nitrophenols in atmospheric aerosols.     

异戊二烯与OH自由基光化学反应的二次有机气溶胶的生成

利用烟雾箱模拟装置,研究了异戊二烯与OH自由基反应的二次有机气溶胶(SOA)的生成.反应中生成的气相产物通过质子转移反应质谱仪(PTR-MS)测定,SOA的浓度及粒径谱分布通过高分辨率粒径谱仪(EEPS3090)测定.研究表明:甲基丙烯醛(MAC)/甲基乙烯基酮(MVK)、乙醛、甲醛、甲醇、甲酸/乙醇、乙醇醛、甲基乙二醛、丙酮/丙醛等为主要气相产物,各组实验中MAC/MVK和乙醛浓度达到最大时,其产率分别介于13.78%～37.72%和5.38%～9.34%(以C计)范围内;SOA生成量及其中值粒径随异戊二烯反应量的增加而增加,气相物质稳定后,SOA产率在5.6%～11.7%范围内,粒径在22～165nm范围内.     

Enantiomeric separation and quantification of fluoxetine (Prozac) in human plasma by liquid chromatography/tandem mass spectrometry using liquid-liquid extraction in 96-well plate format

Fluoxetine (Prozac) is currently one of the widely prescribed selective serotonin reuptake inhibitors (SSRIs) for the treatment of depression. A high-throughput sample preparation procedure using liquid-liquid extraction (LLE) in a 96-well plate format in conjunction with liquid chromatography/tandem mass spectrometry (LC/MS/MS) was developed and validated for quantification of fluoxetine enantiomers in human plasma. After addition of internal standard and ammonium hydroxide, samples were extracted with ethyl acetate. The organic extract was evaporated to dryness and reconstituted in methanol. Where possible, sample transfer and LLE steps were automated using a Tomtec Quadra 96 workstation. Adequate separation of fluoxetine enantiomeric pairs (resolution of 1.17) was achieved on a vancomycin column eluted with methanol containing 0.075% (by weight) ammonium trifluoroacetate. A triple quadrupole mass spectrometer, operated in the multiple reaction monitoring mode at m/z 310-->44 for fluoxetine enantiomeric pairs and m/z 287-->241 for oxazepam (internal standard), was used. Analysis was performed in the positive ion mode using atmospheric pressure chemical ionization (APCI). The standard curve range was 2.0-1000 ng/mL for each fluoxetine enantiomer. The intra- and inter-day precision and accuracy of the quality control (QC) samples were <12.5% (CV) and <13.6% (CV), respectively, for each fluoxetine enantiomer; the correlation coefficient was >0.990. Method ruggedness was demonstrated by the reproducible performance of the assay during a three-day validation period.     

Determination of enantiomeric excess by chiral liquid chromatography without enantiomerically pure starting standards

A facile approach for the enantiomeric excess determination of enantiomeric mixtures without the necessity of pure enantiomer standards is presented. Promethazine and trimeprazine commercial nonracemic mixtures were used as cases study to probe the validity of the method. Chromatographic resolutions obtained with a chiral column AGP in reverse phase mode were 1.32–1.16 (promethazine) and 1.20–0.93 (trimeprazine) for the three detectors (circular dichroism, photometric and fluorimetric) in series. Results obtained showed that enantiomeric excess was 10.4, 8.71 and 8.58% for promethazine and 1.60, 1.23 and 1.80% for trimeprazine (medium values of 9.23 ± 1.01% and 1.54 ± 0.29%, respectively). Recovery assay over human serum samples, at three concentration levels, spiked with prometazine and submitted to solid‐phase extraction, gave values of 99.09–93.48% [S‐(?) enantiomer] and 98.51–91.89% [R‐(+)‐enantiomer]. Detection limits of promethazine enantiomers were between 0.02 µg (fluorimetric) and 1 µg (circular dichroism), and 0.02–1.1 µg for trimeprazine. Copyright © 2012 John Wiley & Sons, Ltd.