首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 718 毫秒
1.
Conclusions At least two different forms of chemisorbed SO2 have been identified on the surface of anatase. The weakly bound SO2 (a low-temperature peak with Tmax=405–445 K, Hads =85.7 kJ/ mole) is characterized by IR bands at 1330 and 1141 cm and is stabilized on coordinatively-unsaturated titanium ions. The strongly bound SO2 (high-temperature peak with Tmax=550–615 K) has a band at 1070 cm–1. The thermal stability of SO2 chemisorbed on TiO2 is lower than on -Al2O3.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 503–505, March, 1989.  相似文献   

2.
GaAs has been subjected to fast neutron or electron irradiations up to doses of 2×1019 n cm–2 and 1019 e cm–2 respectively and subsequently annealed to temperatures of 500°C. Infrared absorption spectra (20–700 cm–1), measured at 20 K, show that the induced one-phonon absorption depends on the nature of the radiation. Resonant modes, at 45 cm–1 and 119 cm–1, and a broad line at 328 cm–1 were found in neutron irradiated material, whereas in electron irradiated material only the 45 cm–1 feature was detected. These spectroscopic features are interpreted as vibrational modes arising from intrinsic defect centres.  相似文献   

3.
Ion-exchanger phase Spectrophotometry withp-nitrochlorophosphonazo (CPApN) has been developed for the determination of scandium. The linear range is 1–8 g of scandium in 50 ml of solution, using 0.8 g of resin, with an apparent molar absorptivity of 2.76 × 105 1 mol–1 cm–1. Aluminum and rare earth elements in reasonable amounts do not interfere. The method has been applied successfully to the determination of scandium in alloys, with relative standard deviations of 2–4%.  相似文献   

4.
4-(21-Thiazolylazo) resacetophenone oxime forms a pink colored soluble complex with uranium(VI) in buffer solutions of pH 6.0. The colored complex has a maximum absorbance at the wavelength 572 nm and the color is stable for about 48 h. The system obeys Beer's law over the concentration range 0.2–6.0 g of uranium cm–3. The molar absorptivity and the Sandell sensitivity of the complex are 6.2×104 dm3.mol–1.cm–1 and 0.0038 g cm–2, respectively. Effect of various diversions has been studied and the method was successfully applied for the determination of uranium in rock samples.  相似文献   

5.
Conclusions Liquid water has positive adsorption on the surface of quartz; the value of the specific adsorption decreases with increasing temperature, comprising 9·10–10 g/cm2 at 0° and 4·10–10 g/cm2 at 70°.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1276–1280, June, 1972.  相似文献   

6.
Zinc, cadmium, and lead react quantitatively in the pH ranges of 3.9–9.2, 3.5–11.2, and 5.5–10.5, respectively, to form water insoluble and thermally stable complexes which are easily extracted into molten naphthalene. The solid naphthalene containing the colorless complex is dissolved in chloroform and then replaced by copper to develop a yellow color in the chloroform layer. The absorbance in each case is measured at 435 nm against reagent blank. Beer's law holds over the concentration ranges of 3.5–95.0, 3.0–105.0, and 8.5–125. 0 μg for zinc, cadmium, and lead, respectively, into 10 ml of the chloroform solution. The molar absorptivities are calculated to be Zn, 1.048 × 104 liters mol−1 cm−1; Cd, 1.054 × 104 liters mol−1 cm−1, and Pb, 1.014 × 104 liters mol−1 cm−1 with sensitivities in terms of Sandell's definition of 0.0062 μg Zn/cm2, 0.010 μg Cd/cm2, and 0.020 μg Pb/cm2, respectively. Ten replicate determinations of sample solutions containing 30 μg of zinc, 18.7 μg of cadmium, and 42.5 μg of lead give mean absorbances 0.480, 0.175, and 0.208 with standard deviations of 0.0017, 0.0013, and 0.0015 or relative standard deviations of 0.35, 0.74, and 0.72%, respectively. The interference of various ions has been studied and the method has been applied to the determination of cadmium in various synthetic mixtures and zinc and lead in some standard reference materials.  相似文献   

7.
Uranium(VI) reacts with 1-(2-thiazolylazo)-2-naphthol to form a red-coloured chelate in the pH range 5.3–7.2, maintained by 0.04 M acetate buffer. Absorbance of the sparingly soluble complex, solubilized and stabilized by Triton X-100, is measured after 30 min and it is stable for at least 16 hours. The complex exhibits maximum absorbance at 575 and 625–630 nm, but absorbance at longer wavelengths is not stable. The 12 complex obeys Beer's law over the concentration range 0.4–6.4 g of uranium(VI) per cm3, has molar absorptivity 3.36·104 dm3·mol–1·cm–1, Sandell sensitivity 7.0 ng·cm–2, formation constant (log K) 9.32 and coefficient of variation ±0.77%. Effect of 60 ions has been studied and selectivity improved considerably in presence of CDTA. The method has been applied for determination of uranium content in a rock sample.  相似文献   

8.
Column preconcentration methods have been established for the spectrophotometric determination of trace nitrite with sulfanilic acid (SA) orp-aminoacetophenone (AAP) as the diazotizable aromatic amine andN, N-dimethylaniline (DMA) or 1-aminonaphthalene (AN) as the coupling agent, using differention-pairs co-precipitated with biphenyl. Nitrite ion reacts with SA in the pH range 2.0–3.0 and AAP in the pH range 1.7–3.0 in HCl medium to form water-soluble colourless diazonium cations. These cations are subsequently coupled with DMA in the pH range 3.7–6.1 for the SA-DMA system and AN in the pH range 1.7–2.3 for the AAP-AN system to be retained on microcrystalline biphenyl packed in a column. The solid mass is dissolved out from the column with 5 ml of DMF and the absorbance is measured by a spectrophotometer at 420 nm for the SA-DMA system and at 517 nm for the AAP-AN system. The calibration was linear over the concentration ranges 0.3–6.0 g of nitrite in 5 ml of DMF solution (i.e., 0.02–0.40 g/ml in the sample solution) for the SA-DMA system and 0.5–7.0 g of nitrite in 5 ml of DMF solution (i.e., 0.03–0.47 g/ml in the sample solution) for the AAP-AN system. The molar absorptivity and Sandell's sensitivity were respectively 2.63 × 104lmol–1cm–1 and 1.75 × 10–3 g cm–2 for SA-DMA and 3.28 × 104lmol–1 cm–1 and 1.40 × 10–3 g cm–2 for AAP-AN. The concentration factors were 4 and 16 for SA-DMA and AAP-AN, respectively. The detection limits were 0.0138 and 0.0175 g/ml NO2 for SA-DMA and AAP-AN, respectively. Seven replicate determinations of a solution containing 3.5 g of nitrite gave mean absorbances of 0.410 and 0.500 with relative standard deviations of 0.51 and 0.55% for SA-DMA and AAP-AN, respectively. Interference from various foreign ions has been studied and the methods have been applied to the determination of nitrite in environmental samples.  相似文献   

9.
A tetraethoxysilane (TEOS)-derived sol aged for 0 h–6 h at room temperature was mixed with a polyurethane (PU) matrix. A composite of silk fibroin (SF) powders and acrylamide (AAm) was dispersed in the sol-PU mixture and dried isothermally at temperatures between 25°C and 120°C to obtain composite films. Three competitive reactions take place, i.e., those between silica-silica, SF-PU and silica-organic phases, during formation of the composite films. These reactions determine the properties such as morphology and homogeneity of the composite films. IR absorption bands for amide groups (–CONH–), C=O (amide I, 1730 cm–1) and N–H (amide II, 1530 cm–1) become larger with decreasing aging time of TEOS-derived sol, or increasing drying temperature. DTA exothermic peak due to the thermal decomposition of SF-AAm composite, on the composite films prepared from the 0 h-aged sol or dried at more than 50°C, shifts toward higher temperature by 44 K or more than 63 K respectively, as compared to the SF-AAm composite. Shorter aging time of TEOS-derived sol and higher drying temperature increased the extent of dispersibility, among SF-AAm composite, PU and silica, to bring a composite film more homogeneous.  相似文献   

10.
A new cation-radical salt (ET)4[Hg2I6] (1), where ET is bis(ethylenedithio)tetrathiafulvalene, has been synthesized in the system ET-HgI3 -PhCl. An X-ray study of 1 (a=41.02(5),b=23.01(1),c=8.233(2) Å,V=7772(3) Å3, space groupPc21 b,Z=4,d calc=2.308 g cm–3) has established its composition, chemical formula, and the main structural features. The ET cation-radicals are packed in the conducting layer, the type of packing is ; the [Hg2I6]2– anion has a dimeric structure. The temperature dependence of the conductivity of the (ET)4[Hg2I6] crystals (300=6 Ohm–1 cm–1) has a semiconducting character.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1240–1244, July, 1994.We thank M. G. Kaplunov for his participation in the discussion of the obtained results.This work was financially supported by the Scientific Council on the Problems of High-Temperature Superconductivity (Grant No. 90346 Metallorg) and the Russian Foundation for Basic Research (Project No. 93-02-2384).  相似文献   

11.
A Spectrophotometric and derivative Spectrophotometric study of Cu-dithizonate complex in aqueous phase in the presence of Triton X-100, a neutral surfactant, is reported. The system obeys Beer's law between 1.0 × 10–6–9.0 × 10–6 mol/l of Cu2+; detection limit is 12 ng/ml. The molar absorption coefficient, specific absorptivity and Sandell's sensitivity of the complex are 3.06 × 104 1 mol–1 cm–1, 0.4825 ml g–1 cm–1 and 2.1 × 10–3 g cm–2, respectively. The conditional stability constant of the 1 2 complex, calculated considering simultaneously existing equilibria, has been found to be 1.73 × 1011 I2 mol2 (I = 0.07, pH 1.4, temperature = 10 °C). Absorption studies in the derivative mode have been carried out to determine the absorption maximum of the complex and to overcome interference due to the presence of certain metal ions. The method has been validated by determination of copper in beers, wines, human hair, goat liver and fly ash samples.  相似文献   

12.
Behaviour of Pu(IV) and Pu(VI) in basic media has been investigated by studying their stabilities and quantitative determination by spectrophotometry. Beer's law was found to be obeyed in the range of 1·10–3 to 5·10–3 M Pu(IV) at 485 nm peak with a molar absorption coefficient of 95M–1· cm–1 in sodium carbonate medium. In case of Pu(VI), in the same medium Beer's law was obeyed in the concentration range of 2·10–3 to 1·10–2M at 550 nm with a molar absorption coefficient of 50M–1·cm–1. Distribution ratios of Pu(IV) and Pu(VI) for their sorption on Al2O3 and Amberlyst A-26 (MP) resin from bicarbonate and carbonate media have been determined. High distribution ratios obtained indicate the feasibility of decreasing the plutonium content of basic carbonate streams in reprocessing. 10% breakthrough capacities for Pu(IV) and Pu(VI) with these exchangers during column operations have also been determined.  相似文献   

13.
The structure of Ti(III) coordination polyhedrons in both individual NaPO3 and 70 mole % NaPO3-30 mole % NanX mixtures (X=PO3 3–, P2O7 4–, F, Cl) in the molten and solid states has been investigated on the basis of data from electronic absorption and ESR spectra. The formation of tetragonally distorted Ti(III) coordination polyhedrons with D4h symmetry coordinated only by (PO3 )n chains with the following values of the spectroscopic parameters for the molten (and solid) states has been established in all the phosphate systems investigated: 10Dq=17,300 (18,000) cm–1 (Ds=50 cm–1, Dt=5600, g=1.959, g1=1.930, =93. cm–1). It has been shown that the greater is the extent of depolymerization of the phosphate chains in the melt, the stronger is the Ti(III) coordination polyhedron formed; the following relative series of the depolymerizing strength of the anions has accordingly been established: PO4 3–2O7 4––.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 25, No. 5, pp. 610–614, September–October, 1989.  相似文献   

14.
A simple and accurate spectrophotometric method is developed for the determination of certain vicinal dihydroxybenzene derivatives, namely, dopamine (DPH), levodopa (LD), methyldopa (MD) and pyrocatechol (PC) using sodium bismuthate in an acid medium. The method is based on the formation of a yellow colored product by the oxidation of vicinal dihydroxybenzene derivatives using sodium bismuthate. Beer's law was obeyed over the concentration range of 8–130 g/mL with the maximum absorption at 422–429 nm. The molar absorptivity and Sandell's sensitivity as evaluated from Beer's law data were found to be in the range of 1.02–1.34 × 10–3L mol–1cm–2and 108–185 ng/cm2respectively. The proposed method has been successfully applied for the determination of DPH, LD and MD in injections and tablets of pharmaceutical preparations. The reliability of the methods was established by replicate determinations with the reported and official method.  相似文献   

15.
The sorption of Cu2+ ions by chitin and chitosan from aqueous solutions has been investigated, as well as the molecular structure of the complexes formed. The static exchange capacities have been determined, equal to 3.5 and 0.25 mmole/g for chitosan and chitin, respectively, and the partition coefficients (5000 and 70 g/ml). It has been shown that in complex formation a bond with the amino group is formed as the result of the substitution of a proton in the latter. The EPR spectra of these complexes have been obtained and their radiospectroscopic parameters determined (g = 2.334,g = 2.054,A = 0.0156 cm–1, andB = 0.0028 cm–1 for chitin, andg = 2.231,g = 2.048,A = 0.0192 cm–1, andB = 0.0025 cm–1 for chitosan). For chitosan the ligands are two nitrogen atoms of the amino groups and two oxygen atoms of the hydroxyl groups in the position C3 of adjacent glucosamine rings; for chitin, the oxygen atoms of the acetyl groups take part in addition in the complex formation. The analysis of the radiospectroscopic parameters and their comparison with published data lead to the conclusion that the Cu2+ complex with chitosan has a tetragonal symmetry, while the complex with chitin most probably has an octahedral structure.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 10, pp. 2305–2311, October, 1992.  相似文献   

16.
Summary It has been shown that on centrifugation in a linear cesium chloride gradient the amylose and amylopectin of rice starch are concentrated in the density zones of 1.00–1.15 g/cm3 and 1.65–1.76 g/cm2, respectively.Translated from Khimiya-Prirodnykh Soedinenii, No. 6, pp. 692–694, November-December, 1978.Original article submitted July 18, 1978.  相似文献   

17.
The far infrared spectrum (375 to 30 cm–1) of gaseous 2-chloro-3-fluoropropene, CH2=C(CH2F)CI, has been recorded at a resolution of 0.10 cm–1. The fundamental asymmetric torsional mode is observed at 117.5 cm–1 with ten excited states falling to low frequency for thes-cis (fluorine atom eclipsing the double bond) conformer. For the higher energy gauche conformer, the asymmetric torsion is estimated to be at 94 cm–1. From these data the asymmetric torsional potential function has been calculated. The potential function coefficients are calculated to be in cm–1):V 1=803±21,V 2=–94±21,V 3= 1025±10,V 4=95±10, andV 6=2±1, with an enthalpy difference between the more stables-cis and gauche conformera of 550±100 cm–1 (1.57±0.29 kcal/mol). This function gives values of 1227±50cm–1(3.51±0.14kcal/mol), 1266±200 cm–1 (3.62±0.57 kcal/mol), and 665±100 cm–1 (1.90±0.29 kcal/mol), for thes-cis to gauche, gauche to gauche, and gauche tos-cis barriers, respectively. From the relative intensities of the Raman lines of the gas at 652 cm–1 (gauche) and 731 cm–1 (s-cis) as a function temperature, the enthalpy difference is found to be 565±96 cm–1 (1.62±0.27 kcal/mol). However, the more polar gauche conformer remains in the crystalline solid. The Raman spectrum of the gas has been recorded from 3500 to 70 cm–1 and, utilizing these data and the previously reported infrared data, a complete vibrational analysis is proposed for both conformers. The conformational stability, barriers to internal rotation, fundamental vibrational frequencies, and structural parameters that have been determined experimentally are compared to those obtained from ab initio Hartree-Fock gradient calculations employing both the 3–21 G* and 6–31G* basis sets and to the corresponding quantities for some similar molecules.  相似文献   

18.
By condensing chitosan with 7-(4-formyl-phenylazo)-8-quinolinol-5-sulfonic acid (FPAQS), a new polymeric chromogenic reagent C-FPAQS has been synthesized and its properties investigated. In acidic media (pH 2.7), C-FPAQS reacts with iron(III) to yield an orange complex with a molar absorptivity of 2.8 × 104 lmol–1 cm–1 at 420 nm, and in the meantime a negative peak at 524 nm. The apparent molar absorptivity (420–524 nm) obtained by dual-wavelength measurements is 7.9 × 104lmol–1cm–1 which is about two times higher than that by single-wavelength measurements at 420 nm Beer's law is obeyed in the range of 0–0.8 g ml–1 for iron(III). The developed method has been satisfactorily used to determine iron at the 0.03 to 3% (ww) level in a nylon-6 and in a soil sample. Compared to the corresponding low-molecular weight FPAQS and other chromogenic reagents, C-FPAQS has not only good sensitivity but also largely increased acid solubility and improved selectivity for iron, which may be explained by the incorporation of FPAQS into an acid-soluble polymer.  相似文献   

19.
The optimum conditions for the extractive spectrophotometric determination of dioxouranium(VI) with hexamethyleneiminecarbodithioate(HMICdt) have been established. Dioxouranium(VI) reacts with this ligand at pH 4.5 to form a yellowish-orange uncharged 12 metal-ligand complex which can be extracted by chloroform. The calibration graph was linear in the range of 1–20 g ml–1 of dioxouranium(VI) at 335 nm. The molar absorptivity of the extracted species is 5.952×103 l mol–1 cm–1 with Sandell's sensitivity of 0.04 g cm–2. The average of 10 determinations of dioxouranium was 49.75 g for the samples containing 50 g of U(VI) and the variation from the mean at 95% confidence limit was 49.75±0.5955.  相似文献   

20.
We have developed a fast and reliable procedure to routinely measure the abundances of up to about 35 elements even in small (<1 mg) samples. Depending on the type of samples, they are either irradiated for about 8 hours at a flux of about 2·1012n·cm–2·s–1, or up to 100 hours at a flux of about 6·1013n·cm–2·s–1. As standards, high-purity synthetic multielement standards and well-characterized geological reference materials are used. Synthetic standards are used as primary standards because they have several advantages over secondary (geological) standards. Three to four counts are done one each sample, starting 1–3 days after the end of the irradiation. We use high-purity germanium (HpGe) detectors with high efficiencies and very good energy resolution (1.6–1.8 keV at 1332 keV). To allow high throughput rates we use fast preamplifiers and gated integrator spectroscopy amplifiers with fast fixed conversion time ADCs. The signals are fed into an acquisition interface module (AIM) and via Ethernet into a Micro VAX. To allow better peak deconvolution, 8k spectra are taken where possible. A specially designed annular NaI(TI) guard detector allows Compton suppression spectrometry. The system uses standard software and was tested with sets of geological standards and has given reliable results for a wide variety of samples, e.g., cosmic spherules in the 30–200 g weight range.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号