Thirty years of haemoglobin electrochemistry

Electrochemical investigations of the blood oxygen carrier protein include both mediated and direct electron transfer. The reaction of haemoglobin (Hb) with typical mediators, e.g., ferricyanide, can be quantified by measuring the produced ferrocyanide which is equivalent to the Hb concentration. Immobilization of the mediator within the electrode body allows reagentless electrochemical measuring of Hb. On the other hand, entrapment of the protein within layers of polyelectrolytes, lipids, nanoparticles of clay or gold leads to a fast heterogeneous electron exchange of the partially denatured Hb.     

Development of the electrochemical biosensor for organophosphate chemicals using CNT/ionic liquid bucky gel electrode

Organophosphorus hydrolase (OPH) immobilized on CNT/ionic liquid (IL) electrodes were prepared by using three different intrinsic kinds of ILs, as binders. CNTs/ILs lead to dramatic electrochemical enhancements with respect to response time, stability, and sensitivity of composite electrodes. In addition, the electrochemical and biocatalytic properties of three-composite electrodes were strongly influenced by different types of ILs used, as verified by cyclic voltammetry and chronoamperometry. These results were attributed to the conformational changes of the microenvironment between the OPH and the composite electrodes within three different types of ILs. In particular, the biocatalytic signals of three OPH/CNT/ILs-modified electrodes increased linearly to the concentration of paraoxon in a wide range of 2–20 μM. These findings provide a deep understanding of the role of each IL on the modified electrodes, enabling to enhance electrochemical properties for biosensors.     

Uniform antibacterial cylindrical nanoparticles for enhancing the strength of nanocomposite hydrogels

Crystallization-driven self-assembly (CDSA) was employed for the preparation of monodisperse cationic cylindrical nanoparticles with controllable sizes, which were subsequently explored for their effect on antibacterial activity and the mechanical properties of nanocomposite hydrogels. Poly(ɛ-caprolactone)-block-poly(methyl methacrylate)-block-poly[2-(tert-butylamino) ethyl methacrylate] (PCL-b-PMMA-b-PTA) triblock copolymers were synthesized using combined ring-opening and RAFT polymerizations, and then self-assembled into polycationic cylindrical micelles with controllable lengths by epitaxial growth. The polycationic cylinders exhibited intrinsic cell-type-dependent antibacterial capabilities against gram-positive and gram-negative bacteria under physiological conditions, without quaternization or loading of any additional antibiotics. Furthermore, when the cylinders were combined into anionic alginate hydrogel networks, the mechanical response of the hydrogel composite was tunable and enhanced up to 51%, suggesting that cationic polymer fibers with controlled lengths are promising mimics of the fibrous structures in natural extracellular matrix to support scaffolds. Overall, this polymer fiber/hydrogel nanocomposite shows potential as an injectable antibacterial biomaterial, with possible application in implant materials as bacteriostatic agents or bactericides against various infections.     

Adsorption of cetyltrimethylammonium bromide at the silica gel/water interface

The adsorption isotherms of cetyltrimethylammonium ion (CTA+) together with that of the Br counterion on silica gel, and the effects of pH and added salts (NaF, NaCl and NaBr) have been systematically determined at 25°C. Electrophoretic mobilities of the silica gel particles have also been measured in the same conditions. The adsorption isotherm of CTA⁺ consists of four regions. Region I, at low concentrations of surfactant, the adsorption results primarily from electrostatic force between CTA⁺ and the negatively charged silica surface. Region II (first plateau), at medium concentrations, the adsorption is due to both the electrostatic force and the specific attraction (vdW forces) between CTA⁺ and the surface. Region III, characterized by an abrupt increase in the slope of the isotherm when the concentration reaches a particular point known as hemimicelle concentration (HMC). The abrupt increase in the adsorption is due to the hydrophobic interaction between hydrocarbon chains. Region IV (second plateau), at or above CMC, the limiting adsorption is reached as the micelle is not adsorbed. Based on this model, the experimental results can be explained reasonably. The results show that the HMC is about half of the CMC. According to the assumption that each adsorbed CTA⁺ ion in the first plateau is an active center for surface aggregation, the average aggregation number of hemimicelle have been calculated.     

细胞色素c在无机复合纳米材料修饰电极上的直接电化学研究

采用超声辅助湿法合成的方法制备了羟基磷灰石与碳纳米管(HAp/MWNT)无机复合纳米材料,并将其修饰到玻碳电极表面上。研究了细胞色素c(Cyt c)在该复合纳米材料修饰电极表面上的电化学行为。实验结果表明,复合修饰材料对细胞色素c有很好的催化作用,其氧化还原峰峰差(ΔEp)为78 mV,式电位为15mV。在6.0×10-7-5.0×10-5mol/L浓度范围内,Cyt c的峰电流与其浓度呈良好的线性关系,其检测下限为3.0×10-7mol/L。关键词:细胞色素c;羟基磷灰石;碳纳米管;HAp/MWNT复合材料     

Direct electrochemistry and electrocatalysis of myoglobin-based nanocomposite membrane electrode

The direct electron transfer of myoglobin (Mb) was achieved based on the immobilization of Mb/Silver nanoparticles (AgNPs) on glassy carbon electrode by multi-wall carbon nanotubes (MWNTs)-chitosan(Chit) film. The immobilized Mb displayed a pair of well-defined and reversible redox peaks with a formal potential (E^θ′) of − 24 mV (vs. Ag/AgCl) in 0.1 M pH 7.0 phosphate buffer solution. The apparent heterogeneous electron transfer rate constants (k_s) of Mb confined to Chit-MWNTs film was evaluated as 5.47 s^{− 1} according to Laviron's equation. The surface concentration (Γ^?) of the electroactive Mb in the Chit-MWNTs film was estimated to be (4.16 ± 0.35) × 10^{− 9} mol cm^{− 2}. Meanwhile, the catalytic ability of Mb toward the reduction of H₂O₂ was studied. Its apparent Michaelis–Menten constant for H₂O₂ was 0.024 mM, showing a good affinity. The linear range for H₂O₂ determination was from 2.5 × 10^{− 5} M to 2.0 × 10^{− 4} M with a detection limit of 1.02 × 10^{− 6} M (S/N = 3). Moreover, the biosensor displays rapid response to H₂O₂ and good stability and reproducibility.     

Application of magnetic graphene-based bucky gel as an efficient green sorbent for determination of mercury in fish and water samples

Research on Chemical Intermediates - In this article, a highly efficient method based on coupling magnetic solid-phase extraction and dispersive microsolid-phase extraction was proposed to...     

ZnO/Cu nanocomposite: a platform for direct electrochemistry of enzymes and biosensing applications

Unique structured nanomaterials can facilitate the direct electron transfer between redox proteins and the electrodes. Here, in situ directed growth on an electrode of a ZnO/Cu nanocomposite was prepared by a simple corrosion approach, which enables robust mechanical adhesion and electrical contact between the nanostructured ZnO and the electrodes. This is great help to realize the direct electron transfer between the electrode surface and the redox protein. SEM images demonstrate that the morphology of the ZnO/Cu nanocomposite has a large specific surface area, which is favorable to immobilize the biomolecules and construct biosensors. Using glucose oxidase (GOx) as a model, this ZnO/Cu nanocomposite is employed for immobilization of GOx and the construction of the glucose biosensor. Direct electron transfer of GOx is achieved at ZnO/Cu nanocomposite with a high heterogeneous electron transfer rate constant of 0.67 ± 0.06 s(-1). Such ZnO/Cu nanocomposite provides a good matrix for direct electrochemistry of enzymes and mediator-free enzymatic biosensors.     

A sensitive electrochemical chlorophenols sensor based on nanocomposite of ZnSe quantum dots and cetyltrimethylammonium bromide

In this work, a very sensitive and simple electrochemical sensor for chlorophenols (CPs) based on a nanocomposite of cetyltrimethylammonium bromide (CTAB) and ZnSe quantum dots (ZnSe–CTAB) through electrostatic self-assembly technology was built for the first time. The composite of ZnSe–CTAB introduced a favorable access for the electron transfer and gave superior electrocatalytic activity for the oxidation of CPs than ZnSe QDs and CTAB alone. Differential pulse voltammetry (DPV) was used for the quantitative determination of the CPs including 2-chlorophenol (2-CP), 2,4-dichlorophenol (2,4-DCP) and pentachlorophenol (PCP). Under the optimum conditions, the peak currents of the CPs were proportional to their concentrations in the range from 0.02 to 10.0 μM for 2-CP, 0.006 to 9.0 μM for 2,4-DCP, and 0.06 to 8.0 for PCP. The detection limits were 0.008 μM for 2-CP, 0.002 μM for 2,4-DCP, and 0.01 μM for PCP, respectively. The method was successfully applied for the determination of CPs in waste water with satisfactory recoveries. This ZnSe–CTAB electrode system provides operational access to design environment-friendly CPs sensors.     

Preparation and electrochemistry of Pd-Ni/Si nanowire nanocomposite catalytic anode for direct ethanol fuel cell

A new silicon-based anode suitable for direct ethanol fuel cells (DEFCs) is described. Pd-Ni nanoparticles are coated on Si nanowires (SiNWs) by electroless co-plating to form the catalytic materials. The electrocatalytic properties of the SiNWs and ethanol oxidation on the Pd-Ni catalyst (Pd-Ni/SiNWs) are investigated electrochemically. The effects of temperature and working potential limit in the anodic direction on ethanol oxidation are studied by cyclic voltammetry. The Pd-Ni/SiNWs electrode exhibits higher electrocatalytic activity and better long-term stability in an alkaline solution. It also yields a larger current density and negative onset potential thus boding well for its application to fuel cells.     

Ionic liquid/graphene oxide as a nanocomposite for improving the direct electrochemistry and electrocatalytic activity of glucose oxidase

By combination of 1-ethyl-3-methyl immidazolium ethyl sulfate as a typical room temperature ionic liquid (IL) and graphene oxide (GO) nanosheets, a nanocomposite was introduced for improving the direct electrochemistry and electrocatalytic activity of glucose oxidase (GOx). The enzyme on the IL–GO-modified glassy carbon electrode exhibited a quasireversible cyclic voltammogram corresponding to the flavine adenine dinucleotide/FADH₂ redox prosthetic group of GOx. At the scan rate of 100 mV?s^?1, the enzyme showed a peak-to-peak potential separation of 82 mV and the formal potential of ?463 mV (vs Ag/AgCl in 0.1 M phosphate buffer solution, pH?7.0). The kinetic parameters of the charge transfer rate constant, the electron transfer coefficient, and the apparent Michaelis–Menten constant were calculated as 1.36 s^?1 and 0.35 and 2.47 μM, respectively. When the modified electrode was examined as a biosensor for glucose determination, a linear range of 2.5–45 nM with detection limit of 0.175 nM (signal to noise?=?3) was obtained. The biosensor was stable for 2 months.     

A gold electrode modified with hemoglobin and the chitosan@Fe3O4 nanocomposite particles for direct electrochemistry of hydrogen peroxide

We report on a novel electrochemical biosensor that was fabricated by immobilizing hemoglobin (Hb) onto the surface of a gold electrode modified with a chitosan@Fe₃O₄ nano-composite. The Fe₃O₄ nanoparticles were prepared by co-precipitation and have an average size of 25 nm. They were dispersed in chitosan solution to obtain the chitosan@Fe₃O₄ nano-composite particles with an average diameter of 35 nm as verified by transmission electron microscopy. X-ray diffraction patterns and Fourier transform IR spectroscopy confirmed that the crystallite structure of the Fe₃O₄ particles in the nano-composite has remained unchanged. At pH 7.0, Hb gives a pair of redox peaks with a potential of about ?0.21 V and ?0.36 V. The Hb on the film maintained its biological activity and displays good electrocatalytic reduction activity towards hydrogen peroxide. The linear range for the determination of H₂O₂ is from 2.3 μM to 9.6 mM, with a detection limit at 1.1 μM concentration (at S/N?=?3). The apparent Michaelis-Menten constant is 3.7 mM and indicates the high affinity of Hb for H₂O₂. This biosensor also exhibits good reproducibility and long-term stability. Thus, it is expected to possess potential applications in the development of the third-generation electrochemical biosensors.

Novel techniques for enhancing sensitivity in static headspace extraction-gas chromatography

Static headspace extraction-gas chromatography (SHE-GC) is one of the most commonly used techniques for the analysis of volatile compounds. It is considered by most to be a mature technique and to an extent this is true: there are many users from outside the traditional chromatography research community developing and publishing SHE-GC methods and there are numerous instruments and devices for SHE-GC commercially available. However, research on new SHE-GC methods continues. In this review, several interesting new developments in SHE-GC are described using examples from the past three years’ literature. First, the fundamental theory of SHE-GC is reviewed to provide a basis and common theme for the discussion of new methods. Next, several areas of SHE-GC research are explored: new sampling configurations, analyte derivatization and ionic liquids as solvents. These are all means for enhancing partitioning of the analyte into the vapor phase, thus improving analytical sensitivity of the overall SHE-GC method. Ideally, partitioning of analytes into the vapor phase is increased while partitioning of matrix components is not, or is decreased. There are many aspects of the seemingly straightforward process in SHE-GC that require further fundamental research to extend the application range of SHE-GC and to make method development more systematic.     

Direct electrochemistry and bioelectrocatalysis of a class II non-symbiotic plant haemoglobin immobilised on screen-printed carbon electrodes

In this study, direct electron transfer (ET) has been achieved between an immobilised non-symbiotic plant haemoglobin class II from Beta vulgaris (nsBvHb2) and three different screen-printed carbon electrodes based on graphite (SPCE), multi-walled carbon nanotubes (MWCNT-SPCE), and single-walled carbon nanotubes (SWCNT-SPCE) without the aid of any electron mediator. The nsBvHb2 modified electrodes were studied with cyclic voltammetry (CV) and also when placed in a wall-jet flow through cell for their electrocatalytic properties for reduction of H₂O₂. The immobilised nsBvHb2 displayed a couple of stable and well-defined redox peaks with a formal potential (E°′) of ?33.5 mV (vs. Ag|AgCl|3 M KCl) at pH 7.4. The ET rate constant of nsBvHb2, k _s, was also determined at the surface of the three types of electrodes in phosphate buffer solution pH 7.4, and was found to be 0.50 s^?1 on SPCE, 2.78 s^?1 on MWCNT-SPCE and 4.06 s^?1 on SWCNT-SPCE, respectively. The average surface coverage of electrochemically active nsBvHb2 immobilised on the SPCEs, MWCNT-SPCEs and SWCNT-SPCEs obtained was 2.85?×?10^?10 mol cm^?2, 4.13?×?10^?10 mol cm^?2 and 5.20?×?10^?10 mol cm^?2. During the experiments the immobilised nsBvHb2 was stable and kept its electrochemical and catalytic activities. The nsBvHb2 modified electrodes also displayed an excellent response to the reduction of hydrogen peroxide (H₂O₂) with a linear detection range from 1 μM to 1000 μM on the surface of SPCEs, from 0.5 μM to 1000 μM on MWCNT-SPCEs, and from 0.1 μM to 1000 μM on SWCNT-SPCEs. The lower limit of detection was 0.8 μM, 0.4 μM and 0.1 μM at 3σ at the SPCEs, the MWCNT-SPCEs, and the SWCNT-SPCEs, respectively, and the apparent Michaelis–Menten constant, $ {\hbox{K}}_{\rm{M}}^{\rm{app}} $ , for the H₂O₂ sensors was estimated to be 0.32 mM , 0.29 mM and 0.27 mM, respectively.     

Direct electrochemistry and electrocatalysis of reduced glutathione on CNFs-PDDA/PB nanocomposite film modified ITO electrode for biosensors

The electrochemical oxidation of reduced glutathione (GSH) catalyzed by electro generated Berlin green at carbon nanofibers-poly(diallyldimethylammonium chloride)/Prussian blue (CNFs-PDDA/PB) nanocomposite film modified ITO electrode has been studied. The CNFs-PDDA/PB nanocomposite film were fabricated by casting the composite CNFs enfolded PDDA on ITO electrode followed by electrochemical deposition of PB on the CNFs-PDDA matrix using cyclic voltammetry (CV). Electron microscopy (TEM, AFM), and Fourier transform infrared spectroscopy (FT-IR) studies were used to characterize the morphology and structure of the nanocomposite. The fabricated CNFs-PDDA/PB/ITO nanocomposite film electrode shows significant improvement of redox activity of PB due to the excellent electron transfer ability of CNFs. It was also found to possess prominent electrocatalytic activity toward the oxidation of glutathione with high sensitivity as high as 2.07 μA dm(3) mol(-1) cm(-2). A nontoxic, stable and convenient method for the detection of GSH in the concentration range of 6.0×10(-6) to 1.74×10(-5) M has been developed and it showed improved sensor performance compared to the unmodified PB electrode. The high sensitivity, wider linear range, good reproducibility, and the minimal surface fouling make this CNFs/PDDA/PB nanocomposite film a promising candidate for GSH sensors.     

Novel magnetic and fluorescent nanocomposite as a sensitive probe for the determination of proteins

The Fe(3)O(4)/(sodium oleic acid/ethyltrimethyl ammonium bromide)(n)/4-aminobenzoic acid (Fe(3)O(4)/(NaOL/CTAB)(n)/PABA) nanocomposites have been prepared by a layer-by-layer self-assembly approach. This kind of nanocomposites have fluorescent, magnetic and water-soluble properties. Taking advantage of the magnetic property of nanocomposites, we can separated them from solution easily by using a permanent magnet. By using their strong fluorescence, we can detect proteins. At pH 6.98, the fluorescence of Fe(3)O(4)/(NaOL/CTAB)(n)/PABA nanocomposites can be enhanced by the proteins. Under optimal conditions, the linear ranges of calibration curves were 0.2-20, 0.2-13, 0.2-10 microg mL(-1) for gamma-globulin (gamma-IgG), human serum albumin (HSA), and bovine serum albumin (BSA), respectively. The detection limits were 0.02, 0.01, 0.02 for gamma-IgG, HSA and BSA, respectively. The method has been applied to analyze the total proteins in human samples and the results were in good agreement with those reported by the hospital. This method is sensitive, simple and potential in many areas.     

Performance evaluation of a new nanocomposite polymer gel for water shutoff in petroleum reservoirs

Abstract

A new polymer gel nanocomposite is fabricated for excess water production control (water shut off) in petroleum reservoirs and its rheological behavior is evaluated in the presence of sea water and formation water at the temperature of 100?°C. It is shown that at a high salinity without using SiO₂ nanoparticles, the elastic modulus of synthesized polymer gel in the presence of sea water and formation water are 12.5?Pa and 9.8?Pa respectively. However by incorporation of SiO₂ nanoparticles in the polymer gel matrix, the elastic modulus of synthesized polymer gel in the presence of sea water and formation water can be improved to 13.56?Pa and 11.57?Pa respectively, which is quite interesting from reservoir engineering viewpoint. Equilibrium Swelling Ratio (ESR) of the nanocomposite polymer gel in sea water and formation water decreases as the concentration of the SiO₂ increases. Thermal stability of the polymer gel is investigated by differential scanning calorimetry (DSC) measurements. The inflexion temperature of the polymer gel is improved by incorporation of 2000?ppm SiO₂ nanoparticles. The fabricated polymer gel nanocomposite in this work can have potential application in reduction of excess water production during enhanced oil recovery (EOR) operations in petroleum industry.     

Novel one-step route for synthesizing CdS/polystyrene nanocomposite hollow spheres

CdS/polystyrene nanocomposite hollow spheres with diameters between 240 and 500 nm were synthesized under ambient conditions by a novel microemulsion method in which the polymerization of styrene and the formation of CdS nanoparticles were initiated by gamma-irradiation. The product was characterized by transmission electron microscopy (TEM), field-emission scanning electron microscopy (FESEM), X-ray powder diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA), which show the walls of the hollow spheres are porous and composed of polystyrene containing homogeneously dispersed CdS nanoparticles. The quantum-confined effect of the CdS/polystyrene nanocomposite hollow spheres is confirmed by the ultraviolet-visible (UV-vis) and photoluminescent (PL) spectra. We propose that the walls of these nanocomposite hollow spheres originate from the simultaneous synthesis of polystyrene and CdS nanoparticles at the interface of microemulsion droplets. This novel method is expected to produce various inorganic/polymer nanocomposite hollow spheres with potential applications in the fields of materials science and biotechnology.     

Modification of a steel fiber with a graphene based bucky gel for headspace solid-phase microextraction of volatile aromatic hydrocarbons prior to their quantification by GC

A graphene based bucky gel-coated stainless steel fiber was prepared and applied to headspace solid phase microextraction of volatile organic compounds. Graphene was mixed with an ionic liquid to produce a bucky gel that displays the attractive features of both compounds. It can be directly deposited on an etched stainless steel wire to give the fiber for use in extraction of benzene, toluene, ethylbenzene and xylene (BTEX) isomers. The presence of graphene favors the π-interaction between the sorbent and aromatic analytes. The sorbent is thermally stable up to 300 °C and can be used more than 50 times. It was characterized by field emission scanning electron microscopy, FT-IR spectroscopy and thermogravimetric analysis. Under optimized conditions, linear responses were found in the range of 0.11–5000 μg L^?1 for toluene, 0.15–5000 for benzene and o-xylene, 0.17–5000 for m- and?p-xylene and 0.20–5000 for ethylbenzene. Limits of detection are between 0.03 and 0.06 μg L^?1 (at an S/N ratio of 3). The run-to-run RSDs are <5.8% (for n =?6), and fiber-to-fiber RSDs are 4.1–9.2% (n =?4). The method was successfully applied to the extraction of BTEX isomers in spiked urine samples and gave recoveries between 88 and 105%.

Open image in new window

Graphical abstract Graphene based bucky gel (G-BG) was prepared by mixing an ionic liquid with graphene. It was physically deposited on stainless steel wire. The fiber was applied to the headspace solid phase microextraction (HS-SPME) of benzene, toluene, ethylbenzene and xylenes.

     

采用一锅法制备量子点/琼脂纳米复合凝胶

以天然高分子琼脂为稳定剂,采用简单便捷的一锅法制备Mn掺杂ZnS量子点/琼脂纳米复合凝胶,琼脂不仅作为制备量子点的稳定剂,同时也是纳米复合凝胶的主要成分。对该纳米复合凝胶中量子点的化学结构和尺寸大小进行了表征,并对纳米复合凝胶的荧光性能和凝胶性能进行了研究。实验结果表明,制备得到的纳米复合凝胶均一稳定,在302 nm紫外光下呈现十分明显的橙红色荧光。在该纳米复合凝胶的透射电子显微镜（TEM）表征中可以观察到大小比较均一、粒径为3 nm左右的纳米粒子,光谱分析结果进一步证实纳米复合凝胶中存在Mn掺杂ZnS量子点。该纳米复合凝胶不仅具有良好的荧光性能,还具有温度刺激响应性可逆溶胶-凝胶转变性能,同时具有较高的溶胶转变温度和较好的温度稳定性。利用这些性能特点,可以方便地制备纳米复合凝胶小球。此外,该纳米复合凝胶还可以被潜在应用于金属离子的荧光检测分析领域。