Oscillations of the Faraday rotation in Co/Pd multilayer films

We have discovered oscillations of the Faraday rotation as a function of the thickness of Pd layers in Co/Pd multilayer films. A correlation is traced between the behavior of the Faraday rotation as a function of the thickness of the Pd layers and the magnitude of the saturation field determined from the field dependences of the Faraday rotation. Pis’ma Zh. éksp. Teor. Fiz. 63, No. 9, 735–738 (10 May 1996)     

A comparison of the magnetic anisotropy of [001] and [111] oriented Co/Pd Multilayers

Superlattices of [001]_fcc Co/Pd with varying Co thicknesses from one to eight atomic layers per modulation period were epitaxially grown on NaCl by vapour deposition in UHV. Transmission electron diffraction indicates lattice coherence between the Co and the Pd layers for Co thicknesses up to six atomic layers. If deposited at a substrate temperatureT _s=50°C, only the superlattices containing Ci-monolayers show perpendicular magnetization. By raisingT _s to 200°C, the perpendicular anisotropy for Co monolayers is increased, and is also observed for Co bilayers. We suggest that this is due tolayer smoothening, which increases Néel's interface anisotropy. For more than 6 atomic layers of Co a loss of coherence is observed atT _s=50°C, accompanied by a structure transformation to hcp Co with a (0001)_Co(111)_Pd orientation.Non-epitaxial polycrystalline [111]-multilayers have a different anisotropy versus thickness behaviour. For such multilayers the range of Co thicknesses giving perpendicular magnetization is extended from 8 Å up to 12 Å atT _s=200°C. The different behaviour of the single crystal [001] films is caused by a strong volume contribution to the anisotropy, which favours in-plane magnetization, opposing the perpendicular interface anisotropy. This easy-plane term is attributed to magneto-elastic anisotropy due to stretching of the Co layers, via a positive magnetostriction.     

Experimental study of the energy gap in the spin-wave spectrum in Co/Pd multilayer films

The energy gap appearing in the spin-wave spectrum as a result of Bragg scattering by the modulation period q=2π/(d ₁+d ₂) of a one-dimensional superlattice is observed by the method of spin-wave resonance in Co/Pd multilayer films. It is shown that this gap is asymmetric: The “positive” deviation is from two to three times greater than the “negative” deviation. Pis’ma Zh. éksp. Teor. Fiz. 63, No. 12, 938–941 (25 June 1996)     

Ferromagnetic and spin-wave resonance in Co/Pd/CoNi multilayer films

It has been found that the magnitude and sign of exchange interaction between Co(5 nm) and CoNi(5 nm) ferromagnetic layers through Pd depend on magnetization orientation of ferromagnetic layers. If magnetization is oriented in a layer plane, exchange interaction can be both ferromagnetic and antiferromagnetic. If magnetization orientation is orthogonal to a layer plane, the exchange constant is always positive at d_Pd<d _c and equals zero at d_Pd>d _c (d _c is the characteristic length).     

Enhancement of magnetic properties of Co/Pd multilayered perpendicular magnetic recording media by using Pd/Si dual seedlayer

Effects of the introduction of a Pd/Si dual seedlayer on the microcrystalline structure and magnetic properties of [Co/Pd]_n multilayered perpendicular magnetic recording media were investigated. The Pd/Si dual seedlayer was composed of a Pd upper seedlayer and a Si under seedlayer. The Pd upper seedlayer with a thickness of up to 10 nm markedly increased the coercivity of [Co/Pd]_n multilayered media in the direction perpendicular to the film surface. The highest coercivity of 7.8 kOe was obtained for the [Co/Pd]₁₀ medium with a Pd (10 nm)/Si (100 nm) dual seedlayer. The Pd upper seedlayer not only facilitated the formation of regular interfaces between the Co and Pd layers, but also reduced the thickness of the deteriorated initial layer in the [Co/Pd]_n multilayer, resulting in enhancement of the magnetic anisotropy field. The [Co/Pd]_n multilayered medium with the Pd/Si dual seedlayer exhibited weak intergranular exchange coupling between [Co/Pd]_n grains, which led to excellent read–write characteristics.     

Magnetic circular dichroism of [Co/Pd] and [CoB/Pd] multilayered films

Magnetic circular dichroism (MCD) and X-ray absorption spectra (XAS) at the Co L_2,3-edge of [Co/Pd]₂₀ and [CoB/Pd]₂₀ multilayered films, which were fabricated at 260 °C with different magnetic layer thicknesses (δ), have been measured. The lineshapes of XAS–MCD show that the electronic state of Co 3d of the films hardly changes even when sputtered at higher temperatures. The expectation values of orbital and spin angular momentum (〈L_z〉 and 〈S_z〉) are estimated using the sum rule, and it is found that 〈L_z〉/〈S_z〉 in δ<0.5 nm is larger than that in δ>0.5 nm.     

Electrochemical formation of intermediate layer for Co/Pd multilayered media

Pd nanocluster seeds were formed on a soft magnetic underlayer (SUL) using an electrochemical substitution reaction, and were utilized as an intermediate layer for a Co/Pd multilayered ([Co/Pd]_n) perpendicular magnetic recording medium. A CoNiFeB film prepared with electroless deposition was used as SUL, which was immersed into a PdCl₂ solution for the formation of Pd seeds. The Pd seeds were found to effectively reduce the size of magnetic domains in the [Co/Pd]_n film deposited on them. The optimization of the concentration of the PdCl₂ solution and the use of the pretreatment process with a SnCl₂ solution were effective to obtain the smooth SUL surface with fine Pd seeds as small as 5 nm. The 20 nm-thick [Co/Pd]_n film deposited on the optimized Pd seeds/CoNiFeB SUL exhibited a high coercivity of 7.8 kOe and a small magnetic domain size of 69 nm. These results indicated that the combination of the Pd seeds and the electroless-deposited SUL was desirable in terms of the improvement not only in the magnetic properties of [Co/Pd]_n media but also in the mass productivity of the underlayer.     

Geometric and magnetic properties of Co/Pd system

We measured geometric and magnetic properties of Co films on the Pd(1 1 1) surface by X-ray photoelectron diffraction (XPD), X-ray magnetic circular dichroism (MCD) at the Co L_2,3 edge, and the surface magneto-optical Kerr effect (SMOKE) measurements. Co thin films are found to grow incoherently with fcc island structure on the smooth Pd(1 1 1) substrate. Comparison of MCD and SMOKE measurements of Co thin films grown on rough and smooth Pd(1 1 1) surfaces suggests that perpendicular remnant magnetization and Co orbital moment are enhanced by the rough interface. Pd capping layer also induces perpendicular orbital moment enhancement. These observations indicate the influence of hybridization between Co 3d and Pd 4d at the interface on the magnetic anisotropy.     

Influence of layer thickness on the structure and the magnetic properties of Co/Pd epitaxial multilayer films

Co/Pd epitaxial multilayer films were prepared on Pd(111)_fcc underlayers hetero-epitaxially grown on MgO(111)_B1 single-crystal substrates at room temperature by ultra-high vacuum RF magnetron sputtering. In-situ reflection high energy electron diffraction shows that the in-plane lattice spacing of Co on Pd layer gradually decreases with increasing the Co layer thickness, whereas that of Pd on Co layer remains unchanged during the Pd layer formation. The CoPd alloy phase formation is observed around the Co/Pd interface. The atomic mixing is enhanced for thinner Co and Pd layers in multilayer structure. With decreasing the Co and the Pd layer thicknesses and increasing the repetition number of Co/Pd multilayer film, stronger perpendicular magnetic anisotropy is observed. The relationships between the film structure and the magnetic properties are discussed.     

Selective removal and patterning of a Co/Cu/Co trilayer created by femtosecond laser processing

The selective removal and patterning of a typical pseudo-spin-valve structure, consisting of a Co(20 nm)/ Cu(6 nm)/Co(3 nm) trilayer, by femtosecond laser has been examined in terms of irradiation parameters and layer structure. Ablation thresholds of the individual Co and Cu thin films and the SiO₂/Si substrate have been measured for single-shot irradiation with a 200 femtosecond (fs) laser pulses of a Ti:sapphire laser operating at 775 nm. Ablation of the entire trilayer structure was characterized by a sequential removal of the layers at a threshold level of fluence of 0.28 J/cm². Atomic Force Microscopy, optical microscopy, profilometry and Sputtered Neutral Mass Spectroscopy were employed to characterize the laser-induced single-shot laser selective removal and patterned areas. As a result, two phenomena were found to characterize the laser process: (i) selective removal of the Co and Cu layer due to the change of the laser fluence and (ii) regular pillars’ area of Co/Cu/Co could be achieved in a regular manner with the lowest pillar width size of 1.5 μm. Ablation through the layers was accompanied by the formation of bulges at the edges of the pillars, which was the biggest inconvenience in lowering the pillar size through the femtosecond laser process.     

Structure and magnetic properties of wedged Co/Ti multilayers

Co/Ti multilayers with wedge-shaped Co or Ti sublayers were prepared using UHV (5×10⁻¹⁰ mbar) DC/RF magnetron sputtering. The planar growth of the Co and Ti layers was confirmed in situ by X-ray photoelectron spectroscopy. Cobalt sublayers grow on sufficiently thick titanium sublayers in the soft magnetic nanocrystalline phase up to a critical thickness d_crit3.0 nm. For a thickness greater than d_crit, the Co sublayers undergo a structural transition to the polycrystalline phase with much higher coercivity. Furthermore, for the Co/Ti multilayers with nanocrystalline Co sublayers with d_Co=2.7 nm we have observed a significant drop of the coercivity — typically from H_c3.5 kA/m to H_c0.2 kA/m — for Ti thickness d_Ti0.35 nm. The above effect could be explained by the existence of a minimum Ti sublayer thickness (d_min0.35 nm), which is required for the nanocrystalline growth of Co, and/or the formation of quasi-continuous non-magnetic layers for d_Tid_min giving rise to a decrease of the exchange energy between Co sublayers. Magnetic domains and walls studies revealed the structural transitions of the Co sublayers.     

Dispersion of Faraday rotation in Co/SiO2 multilayer films

The Faraday rotation spectra of Co/SiO₂ multilayer films were found to be substantially different from the well-known spectra of homogeneous Co films. The character of these changes was studied as a function of the thicknesses of the ferromagnetic metal and the nonmagnetic dielectric layers. Pis’ma Zh. éksp. Teor. Fiz. 63, No. 4, 256–259 (25 February 1996)     

Exchange bias in thin-film (Co/Pt)3/Cr2O3 multilayers

We have fabricated exchange-biased Co/Pt layers ((0.3 nm/1.5 nm)×3) on (0 0 1)-oriented Cr₂O₃ thin films. The multilayered films showed extremely smooth surfaces and interfaces with root mean square roughness of ≈0.3 nm for 10 μm×10 μm area. The Cr₂O₃ films display sufficient insulation with a relative low leakage current (1.17×10⁻² A/cm² at 380 MV/m) at room temperature which allowed us to apply electric field as high as 77 MV/m. We find that the sign of the exchange bias and the shape of the hysteresis loops of the out-of-plane magnetized Co/Pt layers can be delicately controlled by adjusting the magnetic field cooling process through the Néel temperature of Cr₂O₃. No clear evidence of the effect of electric field and the electric field cooling was detected on the exchange bias for fields as high as 77 MV/m. We place the upper bound of the shift in exchange bias field due to electric field cooling to be 5 Oe at 250 K.     

Spin-valve magnetoresistive structures based on Co/Tb multilayer films

The effect of the layer thickness on the magnetic properties of {Co/Tb}_n, {Co/Tb}_n/Co, and {Co/Tb}_n/Co/Cu/Co multilayer films is studied. The dependence of the hysteresis and magnetoresistive properties of {Co(1 nm)/Tb(1 nm)}_n/Co(5 nm)/Cu(L _Cu)/Co(5 nm) structures on the thickness of the {Co/Tb}_n layer and copper spacing are obtained. The feasibility of spin-valve structures based on {Co/Tb}_n multilayer films with in-plane anisotropy is demonstrated.     

Formation and investigation of cobalt silicide ultrathin layers in Ti/Co/Ti-, TiN/Ti/Co-, and TiN/Co-on-silicon structures

The formation of ultrathin CoSi₂ layers in Ti(8 nm)/Co(10 nm)/Ti(5 nm), TiN(18 nm)/Ti(2 nm)/Co(8 nm), and TiN(18 nm)/Co(8 nm) systems magnetron-sputtered on the Si(100) surface is studied. The systems are subjected to two-step rapid thermal annealing. In between the annealing steps, the “sacrificial” layer is chemically removed and the second and third systems are additionally covered by a 17-nm-thick amorphous silicon (α-Si) layer. In the course of the fabrication process, the structures are examined using time-of-flight secondary-ion (cation) mass spectrometry, Auger electron spectroscopy, and scanning electron microscopy combined with X-ray energy dispersion microanalysis. It is shown that the above complex of analytical investigation provides efficient physical control of ultrathin silicide layer formation.     

Thermal Stability of Ni-Fe/Co/Au/Co GMR Pseudo-Spin-Valves

Pseudo-spin-valves (PSV) structures, Ni₈₃Fe₁₇-3 nm / Co-2.5 nm / Au-t _Au / Co-2.5 nm, with 2.4t _Au3.2 nm were deposited by UHV magnetron sputtering. The weak ferromagnetic coupling J2×10^-6 J/m² between Ni-Fe/Co and Co layers and GMR effect 3% was found at RT. The GMR amplitude decreases monotonically from 5% at -100°C to 1% at 200°C. However, the slope of R(H) curve, i.e., GMR field sensitivity, is equal to about 1.5%/Oe and remains almost constant in the entire investigated temperature range. Additionally, our PSV display a good thermal stability, with no significant changes of magnetic and transport properties after annealing up to 250°C.     

Spin-wave resonance in Co/Pd magnetic multilayers and NiFe/Cu/NiFe three-layered films

The spectrum of standing spin waves has been detected by the ferromagnetic resonance method in NiFe(740 Å)/Cu/NiFe(740 Å) three-layered film structure in the perpendicular configuration for the copper thickness d _Cu ≤ 30 Å. At thicknesses d _Cu > 30 Å, the resonance absorption curve is a superposition of two spinwave resonance spectra from individual ferromagnetic NiFe layers. For Co/Pd multilayer films, united spinwave responance spectra have also been observed at thicknesses of the paramagnetic palladium layer up to d _Pd < 30 Å. The partial exchange stiffness has been calculated for a spin wave propagating across the Pd layer (A _Pd = 0.1 × 10^?6 erg/cm). This value is always positive (up to the critical thickness of the palladium interlayer d _Pd < d _c) or equal to zero (d _Pd > d _c).     

Characterization of In/Pd and Pd/In/Pd thin films by ellipsometric, XRD and AES methods

In/Pd and Pd/In/Pd thin films were prepared by thermal evaporation on the SiO₂ substrate in a vacuum. The structural and optical properties of the films were investigated by means of X-ray diffractometry (XRD), Auger electron spectroscopy (AES) and spectroscopic ellipsometry (SE). Auger depth profile studies were performed in order to determine the composition of elements in the Pd-In systems. Interdiffusion of metals was detected at room temperature. Optical properties of Pd-In composite layers formed due to the interdiffusion were derived from ellipsometric quantities Ψ and Δ measured in the photon energy range 0.75-6.50 eV at different angles of incidence. The effective optical spectra show absorption peaks dependent on the composition of nonuniform films. The XRD patterns indicated formation of Pd_1−xIn_x intermetallic phases in the samples.     

Synthesis and characterization of the Pd/InVO4-TiO2 co-doped thin films with visible light photocatalytic activities

Novel Pd/InVO₄-TiO₂ thin films with visible light photocatalytic activity were synthesized from the Pd and InVO₂ co-doped TiO₂ sol via sol-gel method. The photocatalytic activities of Pd/InVO₄-TiO₂ thin films were investigated based on the oxidative decomposition of methyl orange in aqueous solution. The as-prepared samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and UV-vis absorption spectroscopy (UV-vis). The results indicate that the Pd/InVO₄-TiO₂ thin films are compact, uniform and consist of sphere nanoparticles with diameters about 80-100 nm. The UV-vis spectra show that the Pd/InVO₄-TiO₂ thin films extend the light absorption spectrum toward the visible region. XPS results reveal that doped Pd exist in the form of metallic palladium. The photocatalytic experiments demonstrate that Pd doping can effectively enhance the photocatalytic activities of InVO₄-TiO₂ thin films in decomposition of aqueous methyl orange under visible light irradiation. It has been confirmed that Pd/InVO₄-TiO₂ thin films could be excited by visible light (E < 3.2 eV) due to the existence of the Pd and InVO₄ doped in the films.     

Superconducting and magnetic properties of Nb/Pd 1-xFex/Nb triple layers

The superconducting and magnetic properties of Nb/Pd_1-xFe_x/Nb triple layers with constant Nb layer thickness d_Nb=200 ? and different interlayer thicknesses 3 ?≤ d_PdFe ≤ ? are investigated. The thickness dependence of the magnetization and of the superconducting transition temperature shows that for small iron concentration x the Pd_1-xFe_x layer is likely to be in the paramagnetic state for very thin films whereas ferromagnetic order is established for x ≥ 0.13. The parallel critical field B_c2||(T){B_{c2||}}(T) exhibits a transition from two-dimensional (2D) behavior where the Nb films are coupled across the interlayer, towards a 2D behavior of decoupled Nb films with increasing d_PdFeand/or x. This transition allows a determination of the penetration depth x_F{\xi _F} of Cooper pairs into the Pd_1-xFe_x layer as a function of x. For samples with a ferromagnetic interlayer x_F{\xi _F} is found to be independent of x.