Pulsed laser deposition of Zr–N codoped <Emphasis Type="Italic">p</Emphasis>-type ZnO thin films

Present p-type ZnO films tend to exhibit high resistivity and low carrier concentration, and they revert to their natural n-type state within days after deposition. One approach to grow higher quality p-type ZnO is by codoping the ZnO during growth. This article describes recent results from the growth and characterization of Zr–N codoped p-type ZnO thin films by pulsed laser deposition (PLD) on (0001) sapphire substrates. For this work, both N-doped and Zr–N codoped p-type ZnO films were grown for comparison purposes at substrate temperatures ranging between 400 to 700 °C and N₂O background pressures between 10⁻⁵ to 10⁻² Torr. The carrier type and conduction were found to be very sensitive to substrate temperature and N₂O deposition pressure. P-type conduction was observed for films grown at pressures between 10⁻³ to 10⁻² Torr. The Zr–N codoped ZnO films grown at 550 °C in 1×10⁻³ Torr of N₂O show p-type conduction behavior with a very low resistivity of 0.89 Ω-cm, a carrier concentration of 5.0×10¹⁸ cm⁻³, and a Hall mobility of 1.4 cm² V⁻¹ s⁻¹. The structure, morphology and optical properties were also evaluated for both N-doped and Zr–N codoped ZnO films.     

Enhanced field emission from pulsed laser deposited nanocrystalline ZnO thin films on Re and W

Nanocrystalline ZnO thin films have been deposited on rhenium and tungsten pointed and flat substrates by pulsed laser deposition method. An emission current of 1 nA with an onset voltage of 120 V was observed repeatedly and maximum current density ∼1.3 A/cm² and 9.3 mA/cm² has been drawn from ZnO/Re and ZnO/W pointed emitters at an applied voltage of 12.8 and 14 kV, respectively. In case of planar emitters (ZnO deposited on flat substrates), the onset field required to draw 1 nA emission current is observed to be 0.87 and 1.2 V/μm for ZnO/Re and ZnO/W planar emitters, respectively. The Fowler–Nordheim plots of both the emitters show nonlinear behaviour, typical for a semiconducting field emitter. The field enhancement factor β is estimated to be ∼2.15×10⁵ cm⁻¹ and 2.16×10⁵ cm⁻¹ for pointed and 3.2×10⁴ and 1.74×10⁴ for planar ZnO/Re and ZnO/W emitters, respectively. The high value of β factor suggests that the emission is from the nanometric features of the emitter surface. The emission current–time plots exhibit good stability of emission current over a period of more than three hours. The post field emission surface morphology studies show no significant deterioration of the emitter surface indicating that the ZnO thin film has a very strong adherence to both the substrates and exhibits a remarkable structural stability against high-field-induced mechanical stresses and ion bombardment. The results reveal that PLD offers unprecedented advantages in fabricating the ZnO field emitters for practical applications in field-emission-based electron sources.     

Thermo-optic coefficients of monoclinic KLu(WO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The three thermo-optic coefficients of the biaxial laser host KLu(WO₄)₂ are measured at 633 nm by a deflection method. Their values at 300 K amount to ∂ n _g /∂ T=−7.4×10⁻⁶ K⁻¹; ∂ n _m /∂ T=−1.6×10⁻⁶ K⁻¹ and ∂ n _p /∂ T=−10.8×10⁻⁶ K⁻¹. Nearly athermal propagation directions are found for polarizations along the N _m and N _p dielectric axes.     

Effect of ZnO nanoparticles filler concentration on the properties of PEO-ENR50-LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript> solid polymeric electrolyte

A solid polymer electrolyte comprising blend of poly(ethylene oxide) and 50% epoxidized natural rubber (ENR50) as a polymer host, LiCF₃SO₃ as a salt and nanoparticle ZnO as an inorganic filler was prepared by solution-casting technique. The effect of filler on the electrolyte properties was characterized and analysed. FESEM analysis showed that the filler was well distributed in the polymer matrix, while the effective interaction between the salt and the polymer host was reduced by the addition of filler. As evidenced by FTIR analysis, which showed the formation of triplet peak at C-O-C stretching region. Ionic conductivity was found to decrease from 1.4 × 10⁻⁴ Scm⁻¹ to 2.5 × 10⁻⁶ Scm⁻¹ upon the addition of filler, due to the blocking effect of filler into the electrolyte conduction pathways. The temperature dependence on the electrolyte conductivity obeys Arrhenius rule in two temperature regions.     

Fluorescence Enhancement of the Silver Nanoparticales – Curcumin - Cetyltrimethylammonium Bromide-nucleic Acids System and its Analytical Application

It is found that silver nanoparticles (AgNPs) can further enhance the fluorescence intensity of curcumin (CU) - cetyltrimethylammonium bromide (CTAB) – nucleic acids and improve its anti-photobleaching activity. Under optimum conditions, the enhanced fluorescence intensity is proportion to the concentration of nucleic acids in the range of 2.0 × 10⁻⁸–1.0 × 10⁻⁶ g mL⁻¹ for fish sperm DNA (fsDNA), 2.0 × 10⁻⁸–1.0 × 10⁻⁶ g mL⁻¹ for calf thymus DNA (ctDNA), 1.0 × 10⁻⁸–1.0 × 10⁻⁶ g mL⁻¹ for yeast RNA (yRNA), and their detection limits (S/N = 3) are 8.0 ng mL⁻¹, 10.5 ng mL⁻¹ and 5.8 ng mL⁻¹, respectively. This method is used for determining the concentration of DNA in actual sample with satisfactory results. The interaction mechanism is also studied.     

Preparation and characterization of polyindole–ZnO composite polymer electrolyte with LiClO<Subscript>4</Subscript>

This paper describes the preparation and conductivity studies of polyindole–ZnO composite polymer electrolyte (CPE) with LiClO₄. Polyindole–ZnO-based polymer nanocomposites were prepared by chemical method and characterized by XRD, infrared (IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The IR spectrum confirms the intermolecular interaction between polyindole and ZnO. The significant spectral changes of polyindole and ZnO nancomposites reveal the strong interaction between polyindole and ZnO nanoparticles. The structural morphologies of the ZnO, polyindole, and polyindole–ZnO are obtained from SEM. The TEM image of polyindole nanocomposite shows that ZnO is embedded in polyindole matrix. An enhanced conductivity of 4.405 × 10⁻⁷ S cm⁻¹ at 50 °C for the CPE was determined from impedance studies.     

Spectroscopic properties of Nd<Superscript>3+</Superscript>:CaNb<Subscript>2</Subscript>O<Subscript>6</Subscript> crystal

The absorption spectra, fluorescence spectrum and fluorescence decay curve of Nd³⁺ ions in CaNb₂O₆ crystal were measured at room temperature. The peak absorption cross section was calculated to be 6.202×10⁻²⁰ cm² with a broad FWHM of 7 nm at 808 nm for E//a light polarization. The spectroscopic parameters of Nd³⁺ ions in CaNb₂O₆ crystal have been investigated based on Judd-Ofelt theory. The parameters of the line strengths Ω _t are Ω ₂=5.321×10⁻²⁰ cm²,Ω ₄=1.734×10⁻²⁰ cm²,Ω ₆=2.889×10⁻²⁰ cm². The radiative lifetime, the fluorescence lifetime and the quantum efficiency are 167 μs, 152 μs and 91%, respectively. The fluorescence branch ratios are calculated to be β ₁=36.03%,β ₂=52.29%,β ₃=11.15%,β ₄=0.533%. The emission cross section at 1062 nm is 9.87×10⁻²⁰ cm².     

Proton-conducting hybrid membranes for medium temperature (>100 °C) fuel cells

Hybrid membranes doped with silicotungstic acid (STA) were prepared by sol–gel process with 3-glycidoxypropyltrimethoxysilane, 3-aminopropyltriethoxysilane, phosphoric acid, and tetraethoxysilane as chemical precursors. The thermogravimetry and differential thermal analysis measurements confirmed that the hybrid membranes were thermally stable up to 350 °C. Relatively, a high proton conductivity of 2.85 × 10⁻² S/cm was obtained for 10 mol% STA-doped hybrid membrane at 120 °C under 90% RH. The hydrogen permeability was found to decrease in the temperature range 20–120 °C from 1.64 × 10⁻¹⁰ to 1.36 × 10⁻¹⁰ mol/cm.s.Pa.     

Synthesis and characterization of Ag-doped p-type ZnO nanowires

P-type ZnO nanowires with silver (Ag) doping were synthesized via a chemical vapor deposition process. The incorporation of Ag was confirmed by selected-area energy-dispersive x-ray spectroscopy. The formation of acceptor states was demonstrated by temperature and excitation power-dependent photoluminescence measurements. Characterization of field-effect transistors using Ag-doped ZnO nanowires as channels showed p-type conductivity of the nanowires with a hole concentration of 4.9×10¹⁷ cm⁻³ and a carrier mobility of approximately 0.18 cm² V⁻¹ s⁻¹.     

Encapsulation of iron nanoparticles in alginate biopolymer for trichloroethylene remediation

Nanoscale zero-valent iron (NZVI) particles (10–90 nm) were encapsulated in biodegradable calcium-alginate capsules for the first time for application in environmental remediation. Encapsulation is expected to offers distinct advances over entrapment. Trichloroethylene (TCE) degradation was 89–91% in 2 h, and the reaction followed pseudo first order kinetics for encapsulated NZVI systems with an observed reaction rate constant (k _obs) of 1.92–3.23 × 10⁻² min⁻¹ and a surface normalized reaction rate constant (k _sa) of 1.02–1.72 × 10⁻³ L m⁻² min⁻¹. TCE degradation reaction rates for encapsulated and bare NZVI were similar indicating no adverse affects of encapsulation on degradation kinetics. The shelf-life of encapsulated NZVI was found to be four months with little decrease in TCE removal efficiency.     

Characteristics of p-type ZnO:As thin films prepared by the ampoule-tube method and ZnO p–n homojunction

A p-type ZnO thin film was prepared using arsenic diffusion via the ampoule-tube method. This was followed by fabrication of a ZnO p–n homojunction using n-type ZnO and characterization of the device properties. The ZnO thin film exhibited p-type characteristics, with a resistivity of 2.19×10⁻³ Ω cm, a carrier concentration of 1.73×10²⁰/cm³, and a mobility of 26.7 cm²/V s. Secondary ion mass spectrometer analysis confirmed that in- and out-diffusion occurred simultaneously from the external As source and the GaAs substrate. The device exhibited the rectification characteristics of a typical p–n junction; the forward voltage at 20 mA was approximately 5.5 V. The reverse-bias leakage current was very low—0.1 mA for −10 V; the breakdown voltage was −11 V. The ampoule-tube method for fabricating p-type ZnO thin films may be useful in producing ultraviolet ZnO LEDs and other ZnO-based devices.     

Binding of Quercetin to Lysozyme as Probed by Spectroscopic Analysis and Molecular Simulation

The binding of quercetin to lysozyme (LYSO) in aqueous solution was investigated by fluorescence spectroscopy, UV-vis absorption spectroscopy and molecular simulation at pH 7.4. The fluorescence quenching of LYSO by addition of quercetin is due to static quenching, the binding constants, K _a , were 3.63 × 10⁴, 3.31 × 10⁴ and 2.85 × 10⁴ L·mol⁻¹ at 288, 298 and 308 K, respectively. The thermodynamic parameters, enthalpy change, ∆H, and entropy change, ∆S, were noted to be −7.56 kJ·mol⁻¹ and 61.07 J·mol⁻¹·K⁻¹. The results indicated that hydrophobic interaction may play a major role in the binding process. The distance r between the donor (LYSO) and acceptor (quercetin) was determined as 3.34 nm by the fluorescence resonance energy transfer. The synchronous fluorescence spectroscopy showed the polarity around the tryptophan residues increased and the hydrophobicity decreased. Furthermore, the study of molecular simulation indicated that quercetin could bind to the active site (a pocket made up of 24 amino-acid residues) of LYSO mainly via hydrophobic interactions and that there were hydrogen interactions between the residues (Gln 57, Ile 98) of LYSO and quercetin. The accessible surface area (ASA) calculation verified the important roles of tryptophan (Trp) residues during the binding process.     

Interaction of Thyroxine with 7 Hydroxycoumarin: A Fluorescence Quenching Study

The interaction between thyroxine hormone and 7 hydroxycoumarin (7HC) was investigated using fluorescence quenching method. The experimental results showed that thyroxine could quench the fluorescence of 7HC by forming the 7HC–thyroxine complex with static quenching. The apparent binding constants (K) between 7HC and thyroxine were determined to be 1.51 × 10⁴ (297 K) and 9.06 × 10³ (310 K). The binding sites (n) 0.98 ± 0.1. The thermodynamic parameters showed that the interaction between 7HC and thyroxine was driven mainly by hydrogen bonding interactions and van der Waals force. Calibration for thyroxine, based on quenching titration data, was linear in the concentration range 2.0 × 10⁻⁸ to 3.0 × 10⁻⁷ mol/l. The relative standard deviation was 2.58% for 2.0 × 10⁻⁷ mol/l thyroxine (n = 4) and the 3σ limit of detection was 3.42 × 10⁻⁸ mol/l in cationic surfactant CTAB medium.     

Adaptive synthesis of optical pattern for photonic crystal lithography

The two-photon absorption spectrum and cross-section (δ) for ruby (Cr³⁺:sapphire) have been measured over the 0.8–1.2 μm wavelength range at 25°C. Absolute values of δ were obtained by comparing the fluorescence yield for two-photon excitation with that for single-photon excitation of the same ionic transition under identical illumination conditions. The maximum values of δ are 4.6×10⁻³ GM for o-polarisation and 5.9×10⁻³ GM for e-polarisation at 840 nm. The relevance of these measurements to distributed optical fibre sensing is briefly discussed.     

Determination of Enoxacin Using Tb Composite Nanoparticles Sensitized Luminescence Method

In our study, terbium-acetylacetone (Tb-acac) composite nanoparticles have been prepared under vigorous ultrasonic irradiation. The nanoparticles are water soluble, stable and have extremely narrow emission bands and high internal quantum efficiencies. They were used as fluorescence probes in the determination of enoxacin (Enox) based on the fluorescence enhancement of nanoparticles through fluorescence resonance energy transfer (FRET). The influence of buffer solution on the fluorescence intensity was investigated. Under the optimum conditions, the fluorescence intensity of the Tb-acac-Enox system is linearly proportional to the Enox concentration in the Enox concentration range of 2 × 10⁻⁷–1 × 10⁻⁴ M. The correlation coefficient for the calibration curve was 0.9976. The limit of detection as defined by IUPAC, C _LOD = 3S _b/m (where S _b is the standard deviation of the blank signals and m is the slope of the calibration graph) was found to be 3 × 10⁻⁸ M. The relative standard deviation (RSD) for six repeated measurements of 1 × 10⁻⁴ M Enox was 1.35%. The method was applied to the determination of Enox in pharmaceutical formulation and recovery results were obtained from urine samples.     

Fluorescence Enhancement Effect for the Determination of Polychlorinated Biphenyls with Bovine Serum Albumin

A sensitive and selective method for the trace determination of 3, 3’, 4, 4’-tetrachlorobiphenyl (PCB77) by using bovine serum albumin (BSA) as a fluorescence probe was introduced. Under optimum conditions, the enhanced fluorescence intensity was proportional to the concentration of polychlorinated biphenyls in the range of 8.9 × 10⁻⁸–5.0 × 10⁻⁶ mol L⁻¹ for PCB77, and 5.0 × 10⁻⁷–5.0 × 10⁻⁶ mol L⁻¹ for 2, 2’, 5, 5’-tetrachlorbiphenyl (PCB52). The detection limits (S/N = 3) of PCB77 and PCB52 were 2.6 × 10⁻⁸ mol L⁻¹ and 2.9 × 10⁻⁷ mol L⁻¹, respectively. Furthermore, the fluorescence enhancement mechanism was discussed in detail. Results indicated that fluorescence enhancement of the system originated from the formation of BSA-PCBs complexes. In addition, PCBs were mainly bound to the tyrosine residues in BSA molecules.     

EPR and Optical Study of Cu<Superscript>2+</Superscript> Ions Doped in Sodium Zinc Sulfate Tetrahydrate Single Crystals

Electron paramagnetic resonance (EPR) study of Cu²⁺-doped sodium zinc sulfate tetrahydrate is done at liquid nitrogen temperature. Two magnetically equivalent sites for Cu²⁺ are observed. The spin-Hamiltonian parameters determined by fitting the EPR spectra to the rhombic-symmetry crystalline field are g _x  = 2.2356, g _y  = 2.0267, g _z  = 2.3472, A _x  = 27 × 10⁻⁴ cm⁻¹, A _y  = 54 × 10⁻⁴ cm⁻¹and A _z  = 88 × 10⁻⁴ cm⁻¹. The ground state wave function is also determined. The g-anisotropy is evaluated and compared with the experimental value. With the help of optical study, the nature of bonding in the complex is discussed.     

Integral energy spectrum of primary cosmic rays at high energies

The integral energy spectrum of primary cosmic rays has been obtained. In the energy range (2.4×10³−1.1×10⁵ GeV), the spectrum of all nuclei is consistent with a power law of indexγ=1.55±0.06 and the flux of all nuclei is:N(⩾E ₀)⋍(5.1±1.8)×10⁻¹×E ₀ ^−1.55 particles/cm² sterad. sec., whereE ₀ is in GeV. The spectrum of primaryα-particles in the energy range (4.4×10³−4.8×10⁴) GeV is also consistent with a power law of indexγ=1.71±0.12 and the flux is:N(⩾E ₀)=(4.2±1.4)×10⁻¹×E ₀ ^−1.71 , particles per cm² sterad. sec, whereE ₀ is in GeV.     

Silica coating of Co–Pt alloy nanoparticles prepared in the presence of poly(vinylpyrrolidone)

This article describes a method for silica coating of Co–Pt alloy nanoparticles prepared in the presence of poly(vinylpyrrolidone) (PVP) as a stabilizer. The Co–Pt nanoparticles were prepared in an aqueous solution at 25–80 °C from CoCl₂ (3.0 × 10⁻⁴ M), H₂PtCl₆ (3.0 × 10⁻⁴ M), PVP (0–10 g/L), and NaBH₄ (4.8 × 10⁻³–2.4 × 10⁻² M). The silica coating was performed for the Co–Pt nanoparticle colloid containing the PVP ([Co] = [Pt] = 3.0 × 10⁻⁵ M) at 25 °C in (1/4) (v/v) water/ethanol solution with tetraethoxyorthosilicate (TEOS) (7.2 × 10⁻⁵–7.2 × 10⁻³ M) and ammonia (0.1–1.0 M). Silica particles, which had an average size of 43 nm and contained multiple cores of Co–Pt nanoparticles with a size of ca. 8 nm, were produced at 1.4 × 10⁻³ M TEOS and 0.5 M ammonia after the preparation of Co–Pt nanoparticles at 80 °C, 5 g/L PVP, and 2.4 × 10⁻² M NaBH₄. Their core particles were fcc Co–Pt alloy crystallites. Their saturation magnetization was 2.0-emu/g sample, and their coercive field was 12 Oe.     

Structure,thermal properties,conductivity and electrochemical stability of di-urethanesil hybrids doped with LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript>

Variable chain length di-urethane cross-linked poly(oxyethylene) (POE)/siloxane hybrid networks were prepared by application of a sol-gel strategy. These materials, designated as di-urethanesils (represented as d-Ut(Y′), where Y′ indicates the average molecular weight of the polymer segment), were doped with lithium triflate (LiCF₃SO₃). The two host hybrid matrices used, d-Ut(300) and d-Ut(600), incorporate POE chains with approximately 6 and 13 (OCH₂CH₂) repeat units, respectively. All the samples studied, with compositions ∞ > n ≥ 1 (where n is the molar ratio of (OCH₂CH₂) repeat units per Li⁺), are entirely amorphous. The di-urethanesils are thermally stable up to at least 200 °C. At room temperature the conductivity maxima of the d-Ut(300)- and d-Ut(600)-based di-urethanesil families are located at n = 1 (approximately 2.0 × 10⁻⁶ and 7.4 × 10⁻⁵ Scm⁻¹, respectively). At about 100 °C, both these samples also exhibit the highest conductivity of the two electrolyte systems (approximately 1.6 × 10⁻⁴ and 1.0 × 10⁻³ Scm⁻¹, respectively). The d-Ut(600)-based xerogel with n = 1 displays excellent redox stability.