Covalently linked DNA/protein multilayered film for controlled DNA release

A stable, biocompatible single strand DNA (ssDNA)/bovine serum albumin (BSA) multilayered film for control release of DNA was fabricated on PEI-coated quartz slides, gold-evaporated plates and silicon wafers, respectively through a formaldehyde-induced, covalently linked layer-by-layer (LBL) assembly technique. The constructed film structure was well characterized by using UV-vis spectrometry, surface plasmon resonance (SPR) and atomic force microscopy (AFM). The results showed that the DNA incorporated LBL film was fabricated successfully and the amount of ssDNA and BSA in the film could be tailored simply by controlling the number of the bilayers. The control release of DNA from the film was also monitored in this study. UV-vis spectrometry, SPR and AFM measurements indicated that the release of ssDNA and amino acid was adjustable by changing the proteinase K incubation time. This biocompatible covalently assembled film demonstrates an innovative approach to engineer a DNA/protein based nanostructure for controlled DNA release, which could provide stability, controllability and flexibility superior to that of LBL film assembled by electrostatic attraction. Since the film in this work can be assembled on different substrates, it is very feasible to fabricate nanoparticle-based gene therapy systems with this new approach and to have great potential in biomedical applications.     

Hybridization with nanostructures of single-stranded DNA

Nanostructures of single-stranded DNA (ssDNA) were produced within alkanethiol self-assembled monolayers using nanografting, an atomic force microscopy (AFM) based lithography technique. Next, variations of the fabrication parameters, such as the concentration of ssDNA or lines per frame, allowed for the regulation of the density of ssDNA molecules within the nanostructures. The label-free hybridization of nanostructures, monitored using high-resolution AFM imaging, has proven to be highly selective and sensitive; as few as 50 molecules can be detected. The efficiency of the hybridization reaction at the nanometer scale highly depends on the ssDNA packing density within the nanostructures. This investigation provides a fundamental step toward sensitive DNA detection and construction of complex DNA architectures on surfaces.     

Analysis of bacterial adhesion using a gradient force analysis method and colloid probe atomic force microscopy

The atomic force microscope (AFM) has been used to examine the stickiness of bacteria on the basis of the analysis of approach and retraction force curves between the AFM tip and the bacterial surface. One difficulty in analyzing approach curve data is that the distance between the AFM tip and the surface of the bacterium is difficult to define. The exact distances are difficult to determine because the surface of the bacterium deforms during force imaging, producing a highly nonlinear region in the approach curve. In this study, AFM approach and retraction curves were obtained using a colloid probe AFM for three strains of Escherichia coli (D21, D21f2, and JM109). These strains differed in their relative adhesion to glass surfaces, on the basis of measurements of sticking coefficients in packed bed flow through column tests. A gradient force curve analysis method was developed to model the interactions between the colloid probe and a surface. Gradient analysis of the approach curve revealed four different regions of colloid-surface interactions during the approach and contact of the probe with the bacterial surface: a noninteraction region, a noncontact phase, a contact phase, and a constant compliance region. The noncontact phase, which ranged from 28 to 59 nm for the three bacterial strains, was hypothesized to arise primarily from steric repulsion of the colloid by extracellular polymers on the bacterial surface. The contact phase, spanning 59-113 nm, was believed to arise from the initial pressure of the colloid on the outer membrane of the cell. The constant compliance region likely reflected the response of the colloid probe to the stiff peptidoglycan layer that confers strength and rigidity to gram negative bacteria. It was shown that the sticking coefficients reported for the three E. coli strains were correlated with the length of the noncontact phase but not the properties of the other phases. Sticking coefficients were also not correlated with any parameters determined from retraction force curves such as pull-off distances or separation energies. These results show that gradient analysis is useful for studying the contribution of the length of the exopolymers on the cell surface to bacterial adhesion to glass surfaces.     

Quantitative changes in the elasticity and adhesive properties of Escherichia coli ZK1056 prey cells during predation by bdellovibrio bacteriovorus 109J

Atomic force microscopy (AFM) was used to explore the changes that occur in Escherichia coli ZK1056 prey cells while they are being consumed by the bacterial predator Bdellovibrio bacteriovorus 109J. Invaded prey cells, called bdelloplasts, undergo substantial chemical and physical changes that can be directly probed by AFM. In this work, we probe the elasticity and adhesive properties of uninvaded prey cells and bdelloplasts in a completely native state in dilute aqueous buffer without chemical fixation. Under these conditions, the rounded bdelloplasts were shown to be shorter than uninvaded prey cells. More interestingly, the extension portions of force curves taken on both kinds of cells clearly demonstrate that bdelloplasts are softer than uninvaded prey cells, reflecting a decrease in bdelloplast elasticity after invasion by Bdellovibrio predators. On average, the spring constant of uninvaded E. coli cells (0.23 +/- 0.02 N/m) was 3 times stiffer than that of the bdelloplast (0.064 +/- 0.001 N/m) when measured in a HEPES-metals buffer. The retraction portions of the force curves indicate that compared to uninvaded E. coli cells bdelloplasts adhere to the AFM tip with much larger pull-off forces but over comparable retraction distances. The strength of these adhesion forces decreases with increasing ionic strength, indicating that there is an electrostatic component to the adhesion events.     

Biochemical, molecular genetic, and structural analyses of the staphylococcal nucleoid.

The nucleoid structure of an important human pathogen, Staphylococcus aureus, was dissected by atomic force microscopy (AFM). The nucleoids dispersed on a cover glass consisted of fibrous units with two different widths of 40 and 80 nm, a feature shared with those of Escherichia coli. On the other hand, cells exposed to an oxidative stress exhibited clogged nucleoids. A knock-out of mrgA (metallo regulated genes A) encoding a staphylococcal homolog of the nucleoid compaction factor (E. coli Dps) eliminated the compaction response to the oxidative stress and reduced the susceptibilities to H2O2 and UV irradiation. We also observed that the negative supercoiling of plasmids is increased by the oxidative stress. A possible interrelation between the helical density and the nucleoid compaction is discussed in relation to the oxidative stress response.     

Study of the VirE2-ssT-DNA complex formation by scanning probe microscopy and gel electrophoresis- T-complex visualization.

The recombinant virulence protein VirE2, capable of forming a complex with single-stranded T-DNA during transfer into plant cells, was isolated, purified, and used for interactions with ssT-DNA. The in vitro interaction of VirE2 and ss-binding protein from Escherichia coli with single-stranded DNA (phage lambda) was determined by agarose gel electrophoresis by the formation of high-molecular-weight complexes after preliminary coincubation of purified protein preparations with ssDNA. We show that VirE2 binds to single-stranded DNA and protects it against nuclease S1 degradation much better than does E. coli SSB protein. We for first time observed the VirE2-ssT-DNA complex by using atomic force microscopy. The complex observed by atomic force microscopy after ssT-DNA and VirE2 protein mixing has a length of about 800 nm and a 5-8 nm width in sites with attached VirE2 protein.     

Probing small unilamellar EggPC vesicles on mica surface by atomic force microscopy

Sonicated small unilamellar egg yolk phosphatidylcholine (EggPC) vesicles were investigated using atomic force microscopy (AFM) imaging and force measurements. Three different topographies (convex, planar, and concave shape) of the EggPC vesicles on the mica surface were observed by tapping mode in fluid, respectively. It was found that the topography change of the vesicles could be attributed to the interaction force between the AFM tip and vesicles. Force curves between an AFM tip and an unruptured vesicle were obtained in contact mode. During approach, two breaks corresponding to the abrupt penetration of upper and lower bilayer of vesicle were exhibited in the force curve. Both breaks spanned a distance of around 4 nm close to the EggPC bilayer thickness. Based on Hertz analysis of AFM approach force curves, the Young's modulus (E) and the bending modulus (kc) for pure EggPC vesicles were measured to be (1.97 +/- 0.75) x 10(6)Pa and (0.21 +/- 0.08) x 10(-19)J, respectively. The results show that the AFM can be used to obtain good images of intact and deformed vesicles by tapping mode, as well as to probe the integrity and bilayer structure of the vesicles. AFM force curve compare favorably with other methods to measure mechanical properties of soft samples with higher spatial resolution.     

Positioning isolation and biochemical analysis of single DNA molecules based on nanomanipulation and single-molecule PCR

Recently, the isolation and biochemical analysis of DNA at the single-molecule level has been recognized as very important for genetic research and clinical analysis. A unique technique for the positioning, dissection, and isolation of single DNA molecules using atomic force microscopy (AFM) has been demonstrated. Full-length genome DNA molecules were first deposited and stretched by a modified "molecular combing" technique onto a 3-aminopropyl triethoxysilane-coated mica substrate. A single DNA fragment was dissected from one of those genome DNA strands with the AFM tip at the desired position, and then isolated (or picked up) after a special operation called "kneading". All the operations including imaging, dissection, and isolation could be carried out with one tip. The isolated DNA fragment on the AFM tip could be successfully amplified by single-molecule PCR.     

Parameters affecting the adhesion strength between a living cell and a colloid probe when measured by the atomic force microscope

In this study, we used the colloid probe atomic force microscopy (AFM) technique to investigate the adhesion force between a living cell and a silica colloid particle in a Leibovitz's L-15 medium (L-15). The L-15 liquid maintained the pharmaceutical conditions necessary to keep the cells alive in the outside environment during the AFM experiment. The force curves in such a system showed a steric repulsion in the compression force curve, due to the compression of the cells by the colloid probe, and an adhesion force in the decompression force curve, due to binding events between the cell and the probe. We also investigated for the first time how the position on the cell surface, the strength of the pushing force, and the residence time of the probe at the cell surface individually affected the adhesion force between a living cell and a 6.84 μm diameter silica colloid particle in L-15. The position of measuring the force on the cell surface was seen not to affect the value of the maximum adhesion force. The loading force was also seen not to notably affect the value of the maximum adhesion force, if it was small enough not to pierce and damage the cell. The residence time of the probe at the cell surface, however, clearly affected the adhesion force, where a longer residence time gave a larger maximum force. From these results, we could conclude that the AFM force measurements should be made using a loading force small enough not to damage the cell and a fixed residence time, when comparing results of different systems.     

Magnetic porous carbon nanocomposites derived from metal-organic frameworks as a sensing platform for DNA fluorescent detection

Metal-organic frameworks (MOFs) have emerged as very fascinating functional materials due to their tunable nature and diverse applications. In this work, we prepared a magnetic porous carbon (MPC) nanocomposite by employing iron-containing MOFs (MIL-88A) as precursors through a one-pot thermolysis method. It was found that the MPC can absorb selectively single-stranded DNA (ssDNA) probe to form MPC/ssDNA complex and subsequently quench the labelled fluorescent dye of the ssDNA probe, which is resulted from the synergetic effect of magnetic nanoparticles and carbon matrix. Upon the addition of complementary target DNA, however, the absorbed ssDNA probe could be released from MPC surface by forming double-stranded DNA with target DNA, and accompanied by the recovery of the fluorescence of ssDNA probe. Based on these findings, a sensing platform with low background signal for DNA fluorescent detection was developed. The proposed sensing platform exhibits high sensitivity with detection limit of 1 nM and excellent selectivity to specific target DNA, even single-base mismatched nucleotide can be distinguished. We envision that the presented study would provide a new perspective on the potential applications of MOF-derived nanocomposites in biomedical fields.     

Characterization of single- and double-stranded DNA on gold surfaces

Single- and double-stranded deoxy ribonucleic acid (DNA) molecules attached to self-assembled monolayers (SAMs) on gold surfaces were characterized by a number of optical and electronic spectroscopic techniques. The DNA-modified gold surfaces were prepared through the self-assembly of 6-mercapto-1-hexanol and 5'-C(6)H(12)SH -modified single-stranded DNA (ssDNA). Upon hybridization of the surface-bound probe ssDNA with its complimentary target, formation of double-stranded DNA (dsDNA) on the gold surface is observed and in a competing process, probe ssDNA is desorbed from the gold surface. The competition between hybridization of ssDNA with its complimentary target and ssDNA probe desorption from the gold surface has been investigated in this paper using X-ray photoelectron spectroscopy, chronocoulometry, fluorescence, and polarization modulation-infrared reflection absorption spectroscopy (PM-IRRAS). The formation of dsDNA on the surface was identified by PM-IRRAS by a dsDNA IR signature at approximately 1678 cm(-)(1) that was confirmed by density functional theory calculations of the nucleotides and the nucleotides' base pairs. The presence of dsDNA through the specific DNA hybridization was additionally confirmed by atomic force microscopy through colloidal gold nanoparticle labeling of the target ssDNA. Using these methods, strand loss was observed even for DNA hybridization performed at 25 degrees C for the DNA monolayers studied here consisting of attachment to the gold surfaces by single Au-S bonds. This finding has significant consequence for the application of SAM technology in the detection of oligonucleotide hybridization on gold surfaces.     

富含胞嘧啶单链DNA-银纳米簇荧光探针用于S1核酸酶的灵敏检测

以富含胞嘧啶（C）的单链DNA为模板合成银纳米簇,将其作为功能化探针,建立了一种无标记荧光检测S1核酸酶的方法.S1核酸酶可以特异性识别单链DNA,在最适的酶催化反应条件下,可将其降解为单核苷酸或寡核苷酸片段.当S1核酸酶不存在时,富含C的单链DNA可以有效地合成荧光银纳米簇;当S1核酸酶存在时,单链DNA模板被特异性识别并降解,导致无法形成银纳米簇,使体系荧光信号降低.实验结果表明,银纳米簇的荧光强度随着S1核酸酶浓度的增加而降低.在优化的条件下,体系荧光信号（F/F₀）与S1核酸酶的浓度在5.0×10^-5~4.0×10^-3 U/μL范围内呈线性关系,检出限为2.0×10^-6 U/μL.该荧光探针选择性好,可用于RPMI 1640细胞培养基中S1核酸酶的检测,回收率达到91.8%~109.5%.     

An efficient method for recovery of target ssDNA based on amino-modified silica-coated magnetic nanoparticles

In this paper, an improved recovery method for target ssDNA using amino-modified silica-coated magnetic nanoparticles (ASMNPs) is reported. This method takes advantages of the amino-modified silica-coated magnetic nanoparticles prepared using water-in-oil microemulsion technique, which employs amino-modified silica as the shell and iron oxide as the core of the magnetic nanoparticles. The nanoparticles have a silica surface with amino groups and can be conjugated with any desired bio-molecules through many existing amino group chemistry. In this research, a linear DNA probe was immobilized onto nanoparticles through streptavidin conjugation using covalent bonds. A target ssDNA(I) (5′-TMR-CGCATAGGGCCTCGTGATAC-3′) has been successfully recovered from a crude sample under a magnet field through their special recognition and hybridization. A designed ssDNA fragment of severe acute respiratory syndrome (SARS) virus at a much lower concentration than the target ssDNA(I) was also recovered with high efficiency and good selectivity.     

A homogeneous fluorescence sensing platform with water-soluble carbon nanoparticles for detection of microRNA and nuclease activity

Based on the high efficiency of fluorescence quenching and the different affinities of water-soluble carbon nanoparticles (CNPs) towards single-stranded DNA (ssDNA) and double-stranded DNA/RNA hybrid, a novel, rapid and cost-effective assay for detection of microRNA and nuclease activity was developed. The fluorescein-labeled ssDNA probe (FAM-P) could be adsorbed on the surface of CNPs through π-π stacking interaction giving rise to fluorescence quenching. By introduction of microRNA complementary to the DNA probe, the double-stranded DNA/miRNA hybrid could be formed and released from the surface of CNPs resulting in the fluorescence recovery. Thus, microRNA was successfully detected in homogenous fashion without any amplification or enzyme-involving reactions. Moreover, we demonstrated that the nuclease activities of RNase H and DNase I could also be sensitively monitored by using CNPs based on the fluorescence changing of the DNA probe. So, the CNPs provide an excellent homogeneous sensing platform for studying molecular diagnosis and therapeutics.     

Impedance‐Based DNA Biosensor Employing Molecular Beacon DNA as Probe and Thionine as Charge Neutralizer

In this paper, we present an impedance‐based DNA biosensor using thionine intercalation to amplify DNA hybridization signal. Beacon single‐stranded DNA (ssDNA) probe and mercaptoacetic acid were self‐assembled onto a Au electrode by forming Au? S bonds. These beacon ssDNAs were hybridized with the complementary sequences around the loop structure. Then thionine was intercalated into the double‐stranded DNA (dsDNA) immobilized on the Au electrode surface. Due to the neutralization of the negative charges of dsDNA by the intercalated thionine, the electronic transfer resistance (R_et) of the DNA modified Au electrode was significantly diminished. Herein, the decreased value of R_et resulted from the thionine intercalating into dsDNA was employed as the hybridization signal. SDS was used to reduce the unspecific adsorption between ssDNA and thionine. Several experimental conditions, including the surface coverage of ssDNA probe on Au electrode, the hybridization temperature and time were all optimized. Moreover, the hybridization reactions of the unstructured linear ssDNA probe and the structured beacon ssDNA probe with their complementary sequences were compared in this work. The sensitivity of the presented DNA biosensor highlighted that the intercalation of thionine into dsDNA was an efficient approach to amplify the hybridization signal using impedance detection technique. Additionally, in this DNA biosensing protocol, beacon ssDNA has a good ability to distinguish target DNA sequences. This results in a higher specificity than using traditional unstructured DNA probe.     

Quantification of E. coli adhesion to polyamides and polystyrene with atomic force microscopy

Atomic force microscopy (AFM) was used to measure adhesion forces between E. coli bacteria and surfaces consisting of a series of polyamides and polystyrene, materials that are prominent in carpeting, upholstery, and other indoor surfaces. Bioparticle adhesion to such surfaces in air is poorly understood, yet these interactions are thought to play a key role in their accumulation and release as indoor air pollutants. The polymers employed were polyamide 6 (PA6), polyamide 6,6 (PA66), polyamide 12 (PA12) and polystyrene (PS). We report the interaction forces between immobilized E. coli and AFM tips coated with each polymer. The adhesion forces for the tip-bacterial interactions were in the range between 2.9 and 6.7 nN, which is of the same magnitude as the polymer-polymer interactions for the same series of polymers. Polystyrene had stronger adhesion with E. coli than any of the three polyamides, by an average factor of 1.4. The work of adhesion and Hamaker constants of the probe-surface interactions were calculated using a square-pyramid flat-surface model developed previously. A drag-force analysis suggests that model spheres with the same adhesion force as E. coli-poly(amide) (F approximately 4 nN) will remain adherent under normal foot traffic (F approximately 0.2 nN), but will release during vacuum cleaning (F>or=30 nN).     

Characterization of solution-phase DNA hybridization by fluorescence correlation spectroscopy: Rapid genotyping of C677T from methylenetetrahydrofolate reductase gene

In this paper, fluorescence correlation spectroscopy (FCS) was applied to measure the hybridization fraction of the ssDNA probe with its perfectly matched 146 mer ssDNA and a base mismatched 146 mer ssDNA from human methylenetetrahydrofolate reductase (MTHFR) gene. The ssDNA fragments in this study were obtained by asymmetric PCR techniques. The measurements were performed on a laboratory-built FCS system based on the two components fitting procedure. The obtained results showed that FCS could discriminate the difference of thermal stability between perfectly matched and mismatched DNA duplex, and be used to characterize the genotype of C677T in MTHFR gene. Our data illustrated that FCS was a useful tool for rapid screening of single point genetic mutations/polymorphisms (SNP) combined with DNA hybridization.     

Distribution of olfactory marker protein on a tissue section of vomeronasal organ measured by AFM

Distribution of olfactory marker protein (OMP) on a tissue section of vomeronasal organ (VNO) was successfully measured by atomic force microscopy (AFM). Anti-OMP antibodies were covalently crosslinked with the tip of the AFM and were used as a probe to observe the distribution of OMP on a tissue section. First, force measurements were performed using a glass surface on which OMP was covalently immobilized to verify the success of tip modification. Clear differences of interaction forces were observed between a specific pair and the control experiments, indicating that the tip preparation succeeded. Next, distributions of OMP on the tissue section were observed by AFM and were compared with immunohistochemical observations. For large scale observation, a microbead was used as a probe in the AFM measurements. The results of the AFM measurements were well overlapped with that of immunohistochemistry, confirming the reliability of our method. A mapping of the AFM measurement with high resolution was also successfully obtained, which showed an advantage of the application of the AFM measurement in analysis of proteins on the tissue section.     

Quantitative measurement of friction between single microspheres by friction force microscopy

The sliding friction between single silica microspheres was examined by applying friction force microscopy to probe the interaction between spherical silica particles glued to a tipless atomic force microscopy (AFM) cantilever and another particle glued to a glass slide. A three-dimensional model handling the complex contact geometry between spherical particles was established to compute friction and normal forces at the sliding interface from measured deflections of the AFM cantilever. Results obtained at different loads show a linear relationship between friction and normal force, with a friction coefficient of 0.4 between silica spheres. Friction in this system occurs at multi-asperity contacts. The results show that the macroscopic friction law of Amontons can be used to model the friction behavior of micrometer-sized granular matter. For plasma-treated silica particles, increased friction as well as wear could be observed during sliding.     

DNA as invisible ink for AFM nanolithography

We have used nanografting, an atomic force microscopy (AFM)-based nanolithography technique, to fabricate thiolated DNA nanostructures on gold surfaces. The tip-guided assembly offers opportunities for locally controlling the packing order, density, and thus the thickness of the DNA patterns. By selecting proper nanografting parameters, we can embed single-stranded DNA (ssDNA) patches into a background composed of the same DNA molecule prepared by self-assembly, in which the patches remain topographically (and chemically) invisible but have much improved packing order. When the complementary DNA (cDNA) is added, the thickness of the nanografted layer increases much more dramatically than that of the self-assembled layer during the hybridization process, and as a result, the pattern emerges. Interestingly, the pattern can be reversibly hidden and shown with high fidelity simply by dehybridizing and appending the cDNA repeatedly.