Highly sensitive and selective measurements of cobalt by catalytic adsorptive cathodic stripping voltammetry

A very sensitive and selective catalytic adsorptive cathodic stripping procedure for trace measurements of cobalt is presented. The method is based on adsorptive accumulation of the cobalt-MTB (methyl thymol blue) complex onto a hanging mercury drop electrode, followed by reduction of the adsorbed species by voltammetric scan using differential pulse modulation. The reduction current is enhanced catalytically by nitrite. The optimum conditions for the analysis of cobalt include pH 9.0 (ammonia buffer), 2.0 μM methyl thymol blue, 0.8 M sodium nitrite and an accumulation potential of −0.5 V (versus Ag/AgCl). The peak current is proportional to the concentration of cobalt over the entire concentration range tested (0.02–500 ng ml⁻¹) with a detection limit of 0.005 ng ml⁻¹ for an accumulation time of 60 s. The method was applied to determination of cobalt in a mineral water sample and some analytical grade salts with satisfactory results.     

钴(Ⅱ,Ⅲ)与meso-四(4-苯基磺基)卟啉(TPPS)络合物的伏安行为研究

木文报道了钴(Ⅱ,Ⅲ)与meso-四(4-苯基磺基)卟啉(TPPS)络合物的形成条件和电还原行为.结果表明在醋酸缓冲溶液(pH3.5)中,Co²⁺-TPPS还原同时产生催化氢波.在氨性缓冲溶液(pH9.0)中,Co²⁺-TPPS产生络合吸附波,讨论了其伏安行为,认为络合物中Co²⁺和TPPS是一步同时还原.溶解氧可以把Co²⁺-TPPS氧化为Co³⁺-TPPS,对比Mn³⁺-TPPS讨论了络合物的形成和溶解氧的作用,认为氧对卟啉络合物中心离子价态变化和电子转移起着重要作用.     

后修饰法合成介孔钴金属有机框架及其催化烯烃环氧化

通过后修饰水热合成法制备了新型Co2+配位的金属有机框架材料,并采用红外、电感耦合等离子分析和N2吸附等技术手段对其进行了表征。 在氧气/异丁醛反应体系中,介孔钴金属有机框架对烯烃环氧化反应表现出较高的活性。 其中,环辛烯的转化率及环氧环辛烷的选择性分别达到了94%和91%,转化频率(TOF)值为509 h-1。 催化剂循环使用5次之后,其结构和活性无明显变化。     

Highly Uniform Alkali Doped Cobalt Oxide Derived from Anionic Metal-Organic Framework: Improving Activity and Water Tolerance for CO Oxidation

A sequence of alkali metal cation-exchanged Co metal-organic frameworks(Co-MOFs), therein after denoted as M@Co-MOF, M=Na⁺, K⁺, Rb⁺, and Cs⁺, was prepared and used as the precursors to obtain the corresponding alkali doped cobalt oxide(defined as M/Co₃O₄, M=Na⁺, K⁺, Rb⁺, and Cs⁺) through calcination under air atmosphere. The cobalt oxide modified by uniform alkali metals exhibited a significant promotion of catalytic activity for CO oxidation. The activity of M/Co₃O₄ decreased in the order of Cs⁺ > Na⁺ > K⁺ > Rb⁺. Experimental and theoretical results revealed that the anionic skeleton of Co-MOF could facilely adsorb alkali metal cations and play a crucial role in the formation of highly uniform alkali doped cobalt oxide. The further characterizations, such as temperature-programmed reduction of H₂(H₂-TPR), oxygen temperature-programmed desorption(O₂-TPD), X-ray photoelectron spectroscopy(XPS), and in situ diffuse reflectance infrared Fourier transform(DRIFT) spectra demonstrated that the enhanced catalytic activity is originated from the interfacial electron transfer as well as weakened the Co-O bond strength, which promoted oxygen desorption from Co₃O₄ and formation of cobalt species with the lower valence state. The Cs/Co₃O₄ catalyst was maintained for 60 h without deactivation and still showed a high activity in the presence of water.     

Hydrothermal Synthesis,Structure and Properties of a New Phosphomolybdate Based on Novel [Co(H2O)4(HP2Mo5O23)]8- Anions and [H8(H2O)16]8+ Water Cluster Cations

A pure inorganic [P₂Mo₅O₂₃]^6- based cobalt complex [H₈(H₂O)₁₆][Co(H₂O)₄(HP₂Mo₅O₂₃)₂] with a sandglass-like shape was synthesized and characterized by means of single-crystal X-ray diffraction, powder X-ray diffraction(PXRD), infrared spectroscopy(IR), thermogravimetry/differential scanning calorimetry(TG/DSC), ultraviolet-visible spectroscopy(UV-Vis) and cyclic voltammogram(CV). Single-crystal X-ray diffraction analysis reveals that the asymmetric unit of compound 1 consists of a half cobalt ion, one [P₂Mo₅O₂₃]^6- anion, two coordinated water molecules and eight lattice water molecules. It is especially intriguing to note that two [P₂Mo₅O₂₃]^6- clusters are symmetrical about the Co ion, like a sandglass. And a chair-like water cluster with an unprecedented centrosymmetric [H₈(H₂O)₁₆]⁸⁺ can be observed in compound 1. Additionally, the electrochemical and catalytic properties of compound 1 were also investigated.     

Catalytic determination of cobalt at sub-nanogram levels using the oxidative coupling of 3-methyl-2-benzothiazolinone hydrazone with N-ethyl-N-(2-hydroxy-3-sulfopropyl)-3,5-dimethoxyaniline by manual and flow-injection methods

A catalytic photometric method was developed for the determination of sub-nanogram levels of cobalt. The method is based on the catalytic effect of cobalt(II) on the oxidative coupling of 3-methyl-2-benzothiazolinone hydrazone with N-ethyl-N-(2-hydroxy-3-sulfopropyl)-3,5-dimethoxyaniline (DAOS) to form a colored dye (λ_max=525 nm) in the presence of hydrogen peroxide. In this reaction system, 1,2-dihydroxybenzene-3,5-disulfonate (Tiron) acted as an effective activator for the catalysis of cobalt(II). Variation of reaction time between 5 and 10 min allows the determination range to be extended from 0.01 to 1.0 ng ml⁻¹. The reaction system can also be successfully adapted to flow-injection analysis (FIA). The dynamic range of the proposed flow-injection method was 0.01–1.0 ng ml⁻¹ and detection limit (signal/noise, S/N=3) was 5 pg ml⁻¹ at a sampling rate of 30 h⁻¹. Manual and flow-injection methods were applied to the direct determination of cobalt in pepperbush as a standard material.     

Cobalt and nickel complexes bearing 2,6-bis (imino) phenoxy ligands: syntheses, structures and oligomerization studies

A series of new cobalt and nickel complexes LMX₂ (M=Co, X=Cl; M=Ni, X=Br) bearing 2, 6-bis(imino)phenoxy ligands were synthesized. The solid-state structures of 1 and 4 have been determined by single-crystal X-ray diffraction study. Treatment of the complexes LMX₂ with methylaluminoxane (MAO) leads to active catalysts for oligomerization of ethylene with catalytic activities in the range of 1.2×10⁵–2.1×10⁵ g mol⁻¹ h⁻¹ atm⁻¹ for Ni complexes, and 10³ g mol⁻¹ h⁻¹ atm⁻¹ for Co complexes. The oligomers were olefins from C₄ to C₁₆.     

Determination of cobalt by catalytic-adsorptive differential pulse voltammetry in the presence of 2-aminocyclopentene-1-dithiocarboxylic acid and nitrite

A novel method for the determination of cobalt(II) by stripping voltammetry is described. It involves an adsorptive accumulation of the cobalt(II)-2-aminocyclopentene-1-dithiocarboxylic acid complex on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the catalytic reduction current of the complex at –1.4 V at pH = 9 (vs. Ag/AgCl). The effects of various experimental parameters on the catalytic current were investigated. An accumulation time of 60 s results in a low experimental limit of detection of 0.1 ng/mL of Co(II), and 0.50 to 40.0 ng/mL of cobalt can be determined. The relative standard deviation at 0.50 ng/mL is 2.8%. Possible interferences from co-existing ions were also investigated. Received: 17 August 1998 / Revised: 16 November 1998 / Accepted: 20 November 1998     

Determination of cobalt by catalytic-adsorptive differential pulse voltammetry in the presence of 2-aminocyclopentene-1-dithiocarboxylic acid and nitrite

A novel method for the determination of cobalt(II) by stripping voltammetry is described. It involves an adsorptive accumulation of the cobalt(II)-2-aminocyclopentene-1-dithiocarboxylic acid complex on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the catalytic reduction current of the complex at –1.4 V at pH = 9 (vs. Ag/AgCl). The effects of various experimental parameters on the catalytic current were investigated. An accumulation time of 60 s results in a low experimental limit of detection of 0.1 ng/mL of Co(II), and 0.50 to 40.0 ng/mL of cobalt can be determined. The relative standard deviation at 0.50 ng/mL is 2.8%. Possible interferences from co-existing ions were also investigated. Received: 17 August 1998 / Revised: 16 November 1998 / Accepted: 20 November 1998     

富氧条件下Co/MOR 催化剂上甲烷选择催化还原NO

采用浸渍法制备了一系列用于甲烷选择催化还原(CH₄-SCR)氮氧化物的Co/MOR催化剂。采用XRD、BET、TG-MS、H₂-TPR、NH₃-TPD和NO-TPD等手段对催化剂进行表征,并对其在甲烷选择催化还原氮氧化物反应中的活性进行评价。结果表明,钴物种以Co₃O₄尖晶石形态存在于Co/MOR催化剂中;与MOR载体相比,引入钴物种后,催化剂的酸性、氧化还原能力和对NO的吸脱附能力均发生了变化。在甲烷选择催化还原氮氧化物反应中,Co/MOR的催化活性与其氧化还原性能和对NO的吸脱附性能直接相关;其中,Co负载量为10%的Co(10)/MOR催化剂的CH₄-SCR脱硝活性最好,在330℃下NO的转化率达54.2%。     

Co/Hβ催化剂上N_2O的分解性能研究

采用浸渍法制备了Hβ分子筛负载钴氧化物催化剂。考察了催化剂焙烧温度和钴负载量对催化剂催化分解N2O活性的影响,并采用XRD、NH3-TPD、H2-TPR、SEM等手段对催化剂的理化性质进行表征。结果表明,催化剂中的钴物种主要以Co3O4尖晶石型形态存在;催化剂焙烧温度显著影响其酸性和酸量及氧化还原性能,焙烧温度达到700℃后,催化剂中有难还原的Co-Al-O物种生成。焙烧温度和钴负载量对催化剂的催化活性均有影响,焙烧温度为600℃、钴负载量为10%~15%的催化剂催化活性好,N2O分解温度低,t10、t50和t95分别为325~329℃、364~367℃和406~408℃。     

用于电化学水氧化的铁、镍、钴金属及其二元金属纳米颗粒比较研究

从环境兼容角度来设计应用于氧析出反应的电催化剂是否有效、耐用和廉价对能源转化过程至关重要. 本文报告了一种快速制备低成本、原料丰富的金属催化剂制备方法。通过一步电化学沉积法在钛金属基材上制备了铁、镍、钴金属及其钴镍、钴铁二元金属纳米颗粒. 采用场发射电子显微镜 (FE-SEM), 能量散射X-射线能谱 (EDX), X-射线衍射光谱 (XRD), X-射线光电子能谱 (XPS)和电化学技术对制备的不同纳米颗粒进行了表征. 电化学结果显示,在合成的五种钛基金属纳米催化剂中, 钛基上沉积钴金属纳米颗粒(Ti/Co)电极在0.l mol·L^-1氢氧化钾溶液中氧析出反应的电催化活性最好,0.70 V(相对于银/氯化银电极)的电流密度为10.0 mA·cm^-2. 经优化后Ti/Co电极的过电位(η)很小,当电流密度为10.0 mA·cm^-2时η为0.43 V,质量活性高达105.7 A·g^-1,逆转频率(TOF)值为1.63×10^-3 s^-1, 这些与当前最好的碳载铂(Pt/C)和氧化钌(RuO₂)电催化剂的性能相当. 此外,通过计时电位技术对优化后Ti/Co电极的耐久性进行了测试, 发现该电极在碱性溶液中氧析出反应的稳定性良好. 本工作制备的钛金属基材上电化学沉积金属钴纳米颗粒具有高催化活性、高稳定性、原料来源丰富、廉价且易于大规模生产,在工业化水分解领域具有潜在的应用前景.     

新显色剂2-(2-噻唑偶氮)-5-二乙氨基苯甲酸分光光度法测定微量钴

近年来,杂环偶氮苯甲酸类显色剂取得了较快的发展。由于氨基取代结构对试剂性能有较大的影响^[1],因此本文合成了新显色剂2-(2-噻唑偶氮)-5-二乙氨基苯甲酸,(TAEB)并研究了它与钴的显色反应。     

Cobalt-extraction studies on dithiocarbamate grafted on silica gel surface

Extraction of cobalt(II) ion from aqueous solution was studied using silica gel grafted with dithiocarbamate ligand (Si–dtc), which was prepared by reacting silica gel with γ-aminopropyltriethoxysilane followed by alkaline carbon disulfide. ²⁹Si MAS NMR, IR spectra were taken to establish the grafting of dithiocarbamate ligand on silica gel. This modified surface contains 0.37 mmol g⁻¹ of the ligand sites available for the extraction of cobalt. The sorbent extracts cobalt only when the pH of the aqueous phase is above 7 and the extraction process does not follow ideal ion-exchange mechanism. The electronic absorption spectra of cobalt present in the sorbent phase suggested the oxidation of Co(II) to Co(III). Kinetic data were fitted to surface complexation model and the rate constant (k_s) for such model was found to vary from 1.5×10⁻³ to 5.82×10⁻³ l mg⁻¹ min⁻¹ depending on the initial concentration of cobalt. An estimate of enthalpy and entropy changes accompanying the extraction was obtained by temperature variation method. The increase in the overall entropy of the system seems to favour the extraction of cobalt by Si–dtc.     

CTAB对四磺酸基酞菁钴与Na2S反应的影响

研究了十六烷基三甲基溴化铵（CTAB）对四磺酸基酞菁钴(CoTsPc)与Na₂S反应的影响，发现在CTAB存在下CoTsPc与Na₂S更易发生氧化还原反应生成轴向配合物HSCo(I)TsPc. 讨论了CTAB对该反应的作用机理. 采用多波长、双系数法解析反应平衡混合物的紫外吸收光谱，计算了该反应生成物的组成和反应的平衡常数. 从温度对反应平衡常数影响，得到了该反应的热力学数据. 在CTAB浓度为8.36×10^-3 mol•L^-1及303 K时，反应的ΔGΘ、ΔHΘ和ΔSΘ分别为－17.28 kJ•mol^-1、84.1 kJ•mol^-1 和335 J•mol^-1•K^-1.     

The precipitation of hydrated cobalt 1-nitroso-2-naphtholate from homogeneous solution

A method has been developed for determining cobalt by precipitating cobalt^III 1-nitroso-2-naphtholate from homogeneous solution. The reagent is synthesised within the reaction mixture by treating 2-naphthol with nitrous acid in the presence of cobalt^II ion. Thus nitrous acid serves the dual role as oxidant for the cobalt^II ion and also as a reactant in the synthesis of the reagent. Excess reagent precipitates after the cobalt nitroso-naphtholate has settled. A washing procedure has been developed to eliminate the excess reagent without affecting the cobalt nitroso-naphtholate. After washing to remove excess reagent and filtration, the precipitate is dried at 115° and weighed as Co(C₁₀H₆O₂N)₃·H₂O.

The presence offluoride prevents the interference of iron, tungsten and other elements which form strong fluoride complexes.

The precision and accuracy is within 0-1 mg of cobalt at a 10-mg level and within 0-2 mg of cobalt at a 50-mg level.     

Catalytic hydrogen evolution in cathodic stripping voltammetry on a mercury electrode in the presence of cobalt(II) ion and phenylthiourea or thiourea.

The system Co(II)-phenylthiourea (PTU)-borax buffer was investigated by cathodic stripping voltammetry (CSV) at a hanging mercury drop electrode. The results of the voltammetric measurements showed that the presence of both PTU and Co(II) gives rise to a new irreversible peak at about -1.5 V. Based upon our previous results obtained in the study of other sulfur compounds and the sulfide ion itself, the peak was ascribed to the catalytic hydrogen evolution superimposed on the reduction of the coordinated Co(II) ion. The catalyst itself is a Co(II) complex with the sulfide ion produced by the decomposition of the analyte during the deposition step. The influence of PTU and cobalt concentration, accumulation conditions and stripping parameters was investigated and complementary data on thiourea are included. The results showed that the measurement of the catalytic hydrogen evolution peak current can be used as a basis for a simple, accurate and rapid method for the determination of PTU within the concentration range 10-100 nM. The catalytic method is relatively free of interferences and could be a suitable alternative for cases in which the stripping peak due to mercury ion reduction in the accumulated mercury compound is disturbed by some interference.     

金属有机骨架材料构建环丙沙星电化学传感器的研究

本文通过水热合成法合成了钴-对苯二甲酸金属有机骨架材料Co(BDC),并将其与聚丙烯酸钠(PAAS)混合后修饰到玻碳电极(GCE)表面,制得电化学传感器Co(BDC)-PAAS/GCE,通过循环伏安法和差分脉冲法研究了传感器的响应性能,并用于水产品中环丙沙星(CIP)检测.结果 表明,在碱性条件下,Co(BDC)-PA...     

K促进的纳米片状水滑石衍生CoAlO金属氧化物催化碳烟燃烧

采用水热法合成了负载K的纳米片状水滑石衍生CoAlO金属氧化物,其表现出优异的催化碳烟燃烧活性.氢气-程序升温还原（H₂-TPR）实验结果表明,K与Co之间的相互作用提高了催化剂的氧化还原性能.X射线光电子能谱（XPS）分析结果表明,K的负载增大了表面Co²⁺/Co³⁺的比例,促进了氧空位的产生,提高了催化剂对气相氧的吸附能力.碳烟-程序升温还原（Soot-TPR）实验结果表明,K的负载增加了表面吸附氧数量.动力学实验结果表明,K的负载增加了单位质量催化剂上的活性氧数量、反应速率和转化频率（TOF）,从而提高了催化剂的本征活性.另外,碳烟颗粒可以分散在纳米片的层间,与活性位点的接触效率得到提高,也有利于提高催化碳烟燃烧活性.     

二乙胺基尾式卟啉钴的合成及其载氧性质

合成了1种新的尾式卟啉钴--间-[邻-(4-二乙胺基丁酰胺基)苯基]三苯基卟啉合钴(Ⅱ)配合物,测定了电子光谱、红外光谱、质谱、电子自旋波谱,研究了这种尾式卟啉钴与有机碱和双原子小分子CO、NO的轴向反应及其可逆载氧性质.