含铕荧光两亲接枝共聚物的制备及胶束化行为

以丙烯酸(AA)、 苯甲酸(BA)和邻菲啰啉(Phen)为配体, Eu³⁺为中心离子, 制备了可聚合荧光配合物单体, 并以此单体为功能单体, 聚乙二醇单甲醚甲基丙烯酸酯(MPEGMA)和甲基丙烯酸六氟丁酯(HFMA)为共聚单体, 通过溶液聚合制备出含铕两亲荧光接枝共聚物P-[HFMA-co-Eu(AA)(BA)₂Phen]g-PEG. 利用红外光谱(FTIR)和核磁共振波谱(¹H NMR和¹⁹F NMR)对共聚物的结构进行表征; 采用表面张力法测定共聚物的临界胶束浓度(cmc)为0.20 g/L; 通过透射电子显微镜(TEM)和动态光散射仪(DLS)观察胶束的形貌及其胶束化行为, 发现该共聚物可以形成大小均一的球形胶束, 且随着共聚物浓度的提高, 胶束粒径相应增大; 在溶液浓度达到临界胶束浓度时, 溶液荧光出现强度突变.     

含氟两亲接枝共聚物的制备及其与牛血清蛋白作用的研究

用端基反应法合成了对乙烯基苄基的聚乙二醇大分子单体,将该大分子单体与甲基丙烯酸六氟丁酯共聚,合成了一种含氟两亲接枝共聚物.利用1H-NMR1、9F-NMR、GPC对大分子单体和两亲接枝共聚物进行了表征.表面张力法测定了两亲接枝共聚物的临界胶束浓度,发现随着共聚物中含氟链段含量的增加,其临界胶束浓度降低.采用荧光光谱研究了含氟两亲接枝共聚物与牛血清蛋白(BSA)的相互作用,结果表明由于含氟链段疏水力的作用,含氟两亲接枝共聚物能与牛血清蛋白发生相互作用使其荧光增强,随着含氟两亲接枝共聚物浓度和共聚物中含氟链段含量的增加,荧光增强幅度加大.通过透射电子显微镜(TEM)和激光光散射粒度仪(PCS)测试发现,当BSA加入到含氟两亲接枝共聚物的胶束溶液后,所得胶束的粒径和粒径分布变大,共聚物胶束由规整的实心核壳结构变为囊泡状核壳结构.     

光敏性双亲共聚物在水溶液中的胶束化行为

通过ε-己内酯改性丙烯酸酯(FAa，n=1～4)与肉桂酰氯间的酰化反应合成了一系列光敏性大单体(FAaC)，与甲基丙烯酸(MAA)在溶液中进行自由基聚合，制备了具有光敏性的双素无规共聚物(PMFAaC)。将PMFAaC在选择性溶剂中进行自组装，可以形成纳米结构的聚合物。用动态激光光散射(DLS)研究了聚合物胶束的溶液行为，同时考察了单体含量、聚合物终浓度、聚合物侧链长、pH值、离子强度及温度等因素对胶束粒径的影响。实验结果表明，PMFAaC在选择性溶剂中可自组装成胶束，其粒径及其分布对单体含量、聚合物终浓度、聚合物侧链长、pH值、离子强度等有一定的依赖性，而对温度无依赖性。进一步用紫外光使肉桂酰基发生交联反应。从而制备得到核交联且稳定的纳米胶束。用DIS表征发现交联后的胶束粒径较交联前的小。     

疏水基改性聚丙烯酰胺的合成及溶液性质

利用自由基胶束聚合法,由丙烯酰胺和甲基丙烯酸十八酯共聚合成了疏水缔合型水溶性聚合物.通过红外光谱表征了共聚物的结构,考察了共聚物浓度、盐浓度、剪切速率以及温度对共聚物溶液性能的影响.试验结果表明,聚合物质量分数大于临界缔合浓度(2%)时,溶液的粘度急剧增大;疏水缔合聚合物溶液的表观粘度随着溶液中NaCl质量分数的增加而增大.     

聚丙烯酸接枝辛基酚聚氧乙烯醚的合成、表征和胶束化

通过自由基聚合, 丙烯酸(AA)与辛基酚聚氧乙烯醚丙烯酸酯活性大单体(C8PhEO10Ac)共聚,合成了以聚丙烯酸为主链、C8PhEO10Ac 为支链的水溶性两亲接枝共聚物(PAA-g-C8PhEO10Ac), 用凝胶渗透色谱(GPC)测定其相对数均分子质量为4.37×10⁴, 用FTIR和1H-NMR表征了共聚物的结构和组成, 共聚物分子中丙烯酸单体与活性大单体的摩尔比为9:1, 每个共聚物分子中平均约有32个C8PhEO10侧链. 用表面张力法、荧光探针法和透射电子显微镜对共聚物在水溶液中的自组装行为进行了初步研究, 结果表明, 共聚物分子在第一临界胶束浓度cmc1)和第二临界胶束浓度(cmc2)时都形成了球型胶束. 与cmc1时相比, cmc2时溶液表面张力进一步降低, 胶束内部极性进一步减小, 而且胶束粒径增大、结构紧密. 氯化钠的加入可使共聚物溶液的表面张力和胶束内部极性降低.     

温敏性含氟两亲接枝共聚物的制备及胶束化行为

以聚乙二醇单甲醚甲基丙烯酸酯(MPEGMA)为大分子单体, 甲基丙烯酸六氟丁酯(HFMA)为含氟单体, N-异丙基丙烯酰胺(NIPAAm)为功能性单体, 采用大分子单体接枝共聚法, 制备了一种温敏性含氟两亲接枝共聚物P(NIPAAm-co-HFMA)-g-PEG. 利用FTIR, ¹H NMR, ¹⁹F NMR和GPC对共聚物的结构进行表征; 采用紫外-可见分光光度计测定了共聚物的低临界溶解温度(LCST)约为38.9 ℃, 高于人体正常的生理温度; 利用荧光探针技术测定了共聚物的临界胶束浓度(cmc), 结果表明, 当共聚物溶液温度高于LCST时, 其cmc明显变小; 利用激光光散射粒度仪(LLS)测定了共聚物胶束的水合粒径及其分布, 当温度达到LCST时, 胶束粒径明显变小, 温度过高时, 粒径又有所增大; 利用透射电子显微镜(TEM)研究了共聚物胶束的形貌, 结果表明, P(NIPAAm-co-HFMA)-g-PEG在水溶液中可自组装成球状胶束粒子, 随着温度的升高, 共聚物胶束由松散的核壳结构转变成更加紧凑的球状结构, 且粒径明显变小.     

离聚物及其共混体系的研究3.基于配位络合的增容作用

通过将苯乙烯(S)与少量的甲基丙烯酸(MAA)或马来酸酐(MA)共聚及甲基丙烯酸正丁酯(nBMA)与4-乙烯基吡啶(4-VP)共聚,从而在聚苯乙烯(PS)及聚甲基丙烯酸丁酯(PBMA)链上分别引入了功能基团羧酸基(-CO-OH)、酸酐基(-CO-O-CO-)和吡啶基(-N)。通过与锌盐作用获得相应的离聚物(Ionomer)。用红外光谱(IR)表征了共聚物和离聚物的形成;差热分析(DSC)测定共聚物、离聚物和共混物的玻璃化转变温度(Tg)。研究结果表明,随着共聚物中功能基团含量的增加或者共聚物形成离聚物后,其玻璃化转变温度(Tg)提高了;而共聚物的共混物因羧酸基与吡啶基间的质子转移作用而提高了相容性。特别是在引入Zn~(2+)的共混物中,增容作用十分明显,这可归结于BMAVP中的吡啶基和SMAA-Zn~(2+)(或SMA-Zn~(2+))中的Zn~(2+)间的配位络合作用的贡献。     

多重敏感性双亲共聚物P(DM-co-AA-co-CA)的自组装及性能

以甲基丙烯酸二甲胺乙酯（DM）、丙烯酸（AA）和香豆素丙烯酸酯化物（CA）为共聚单体,通过普通自由基溶液聚合合成了多重敏感性双亲共聚物P(DM-co-AA-co-CA),用傅里叶变换红外（FTIR）、核磁共振（1H-NMR）、凝胶渗透色谱（GPC）和差示扫描量热仪（DSC）对聚合物结构进行表征．在选择性溶剂四氢呋喃/水中对所得多重敏感性双亲共聚物P(DM-co-AA-co-CA)进行自组装,结果表明,调节组装环境的pH值可以得到荷正电或负电的两性胶束粒子．用紫外可见光分光光度计、荧光分光光度计、Zeta电位测定仪、DLS和TEM研究了多重敏感性双亲共聚物的溶液自组装及其组装体的性能,结果显示,调节pH值可以有效的控制胶束的粒径大小及其LCST,并在pH为8.54时胶束溶液的紫外吸收和荧光发射强度达到最大值,且该胶束溶液在酸碱性较强时具有良好的乳化性能．     

组装-聚合法制备聚苯乙烯-聚丙烯酸胶束和凝胶

通过苯乙烯和丙烯酸单体的预组装再聚合的制备方法,在不改变共聚物浓度的前提下制备了共聚物胶束溶液和凝胶,探讨了引发剂(偶氮二异丁腈)浓度对生成的共聚物的聚集体结构以及分子结构的影响.利用核磁共振氢谱、扫描电子显微镜和透射电子显微镜等表征了共聚物的分子结构和聚集行为,此外,借助耗散粒子动力学方法模拟了该体系,辅助实验阐明了不同引发剂浓度下生成的共聚物聚集体结构及相对应的共聚物分子结构,在此基础上,利用动态机械热分析和流变学的表征技术,研究了共聚物胶束溶液和凝胶的流变特性.结果表明,在单体浓度不变的情况下,高引发剂浓度时该体系趋于形成平均嵌段长度较长的两嵌段共聚物,生成稳定的胶束溶液,而低引发剂浓度时趋于形成交替共聚物,得到物理凝胶,耗散粒子动力学模拟得到了与实验一致的结果.流变学表征发现胶束体系和凝胶体系均呈现剪切变稀行为,并确定了凝胶体系的凝胶点及恢复性.     

共溶剂性质对双亲性无规共聚物P(St-co-DM)胶束化行为及其性能的影响

以苯乙烯(St)和甲基丙烯酸二甲氨乙酯(DMAEMA)为共聚单体, 通过普通自由基溶液聚合合成了双亲性无规共聚物P(St-co-DM). 用傅里叶变换红外(FTIR)光谱、核磁共振氢谱(¹H NMR)、凝胶渗透色谱(GPC)和差示扫描量热(DSC)仪对聚合物结构进行表征. 研究了共溶剂的性质对P(St-co-DM)自组装胶束结构及其乳化性能的影响. 用透射电镜(TEM)和动态激光光散射(DLS)表征了自组装胶体粒子的形态、粒径大小及其分布. 通过测量胶束在甲苯/水界面的接触角表征胶束表面性能. 结果表明: P(St-co-DM)以四氢呋喃(THF)为共溶剂自组装时, 胶束的临界聚集水含量较大, 胶束表面亲水性较强, 流体力学半径较大; 用二氧六环或THF为共溶剂, 水为选择性溶剂, P(St-co-DM)自组装可以得到外层松散、内层比较密实的球状胶束, 用N,N-二甲基甲酰胺(DMF)为共溶剂时, 胶束整体呈现比较密实的球状胶束; 分别用DMF、二氧六环和THF为共溶剂制备的胶束, 其接触角均值都小于90°, 可形成O/W型(水包油型)乳液. 乳化实验结果表明, 以二氧六环和THF为共溶剂制备的胶束作为颗粒乳化剂制备的乳液性能较好.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.