Molecular imprinted membrane based on molecular imprinted nanoparticles polymer for separation of polycyclic aromatic hydrocarbons

The phase inversion technique was used for synthesis anthracene molecularly imprinted membrane (An–MIM) by hybridizing anthracene molecularly imprinted nanoparticles polymer (An–MINP) with cellulose acetate (CA). An–MIM gives high binding capacities toward anthracene, naphthalene, pyrene, benzo(a)pyrene, phenanthrene, and acenaphthylene. Meanwhile, cellulose acetate membrane (CAM) and none imprinted membrane give very low binding capacities toward Anthracene, Naphthalene, Pyrene, Benzo(a)pyrene, Phenanthrene and Acenaphthylene. The separation properties of An–MIM, none imprinted membrane (NIM), and CAM were investigated in terms of selectivity, rejection percentages, and concentrating factor. The optimum operation time of An–MIM was found to be 3 hr. The overall results indicated that the presence of chemical binding sites in the An–MIM plays predominating role in the separation properties. Therefore, An–MIM proved to be highly efficient for the removal of polycyclic aromatic hydrocarbons at various percentages. Copyright © 2015 John Wiley & Sons, Ltd.     

Developing imprinted polymer nanoparticles for the selective separation of antidiabetic drugs

In this study, new molecularly imprinted polymer (MIP) nanoparticles are designed for selective recognition of different drugs used for the treatment of type 2 diabetes mellitus, i.e. sitagliptin (SG) and metformin (MF). The SG‐ and MF‐imprinted polymer nanoparticles are synthesized by free‐radical initiated polymerization of the functional monomers: methacrylic acid and methyl methacrylate; and the crosslinker: ethylene glycol dimethacrylate. The surface morphology of resultant MIP nanoparticles is studied by atomic force microscopy. Fourier transform infrared spectra of MIP nanoparticles suggest the presence of reversible, non‐covalent interactions between the template and the polymer. The effect of pH on the rebinding of antidiabetic drugs with SG‐ and MF‐imprinted polymers is investigated to determine the optimal experimental conditions. The molecular recognition characteristics of SG‐ and MF‐imprinted polymers for the respective drug targets are determined at low concentrations of SG (50–150 ppm) and MF (5–100 ppm). In both cases, the MIP nanoparticles exhibit higher binding response compared to non‐imprinted polymers. Furthermore, the MIPs demonstrate high selectivity with four fold higher responses toward imprinted drugs targets, respectively. Recycled MIP nanoparticles retain 90% of their drug‐binding efficiency, which makes them suitable for successive analyses with significantly preserved recognition features.     

Fluorometric determination of quercetin by using graphitic carbon nitride nanoparticles modified with a molecularly imprinted polymer

The authors describe a fluorescent probe for sensitive and selective determination of quercetin, an indicator for the freshness of drinks. The probe consists of silica ball encapsulated graphitic carbon nitride (g-C₃N₄) modified with a molecularly imprinted polymer (MIP). It was synthesized via reverse microemulsion. The resulting MIP@g-C₃N₄ nanocomposite was characterized by fluorescence spectroscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray powder diffraction. Quercetin quenches the fluorescence of the MIP@g-C₃N₄ probe. The effect was used to quantify quercetin in grape juice, tea juice, black tea, and red wine by fluorometry (λ_exc?=?350 nm, λ_em?=?460 nm). Response is linear in the 10–1000 ng mL^?1 quercetin concentration range. The detection limit is 2.5 ng mL^?1, recoveries range between 90.7 and 94.1%, and relative standard deviations are between 2.1 and 5.5%.

Open image in new window

Graphical abstract Schematic of the synthesis of the MIP@g-C₃N₄ by a reverse microemulsion method. The probe was applied for the selective recognition and fluorometric determination of quercetin.

     

Selective recognition and electrochemical detection of p-nitrophenol based on a macroporous imprinted polymer containing gold nanoparticles

We have combined the molecular imprinting and the layer-by-layer assembly techniques to obtain molecularly imprint polymers (MIPs) for the electrochemical determination of p-nitrophenol (p-NPh). Silica microspheres functionalized with thiol groups and gold nanoparticles (Au-NPs) were assembled on a gold electrode surface layer by layer. The electrode was then immersed into a solution of pyrrole and p-NPh (the template), and electropolymerization led to the creation of a polymer-modified surface. After the removal of the silica spheres and the template, electrochemical impedance spectroscopy and differential pulse voltammetry (DPV) were employed to characterize the surface. The results demonstrated the successful fabrication of macroporous MIPs embedded with Au-NPs on the gold electrode. The effects of monomer concentration and scan rate on the performance of the electrode were optimized. Excellent recognition capacity is found for p-NPh over chemically similar species. The DPV peak current is linearly related to concentration of p-NPh in the 0.1 μM to 1.4 mM range, with a 0.1 μM limit of detection (at S/N?=?3).

Selective recognition and electrochemical detection of p-nitrophenol based on a macroporous imprinted polymer containing gold nanoparticles

We have combined the molecular imprinting and the layer-by-layer assembly techniques to obtain molecularly imprint polymers (MIPs) for the electrochemical determination of p-nitrophenol (p-NPh). Silica microspheres functionalized with thiol groups and gold nanoparticles (Au-NPs) were assembled on a gold electrode surface layer by layer. The electrode was then immersed into a solution of pyrrole and p-NPh (the template), and electropolymerization led to the creation of a polymer-modified surface. After the removal of the silica spheres and the template, electrochemical impedance spectroscopy and differential pulse voltammetry (DPV) were employed to characterize the surface. The results demonstrated the successful fabrication of macroporous MIPs embedded with Au-NPs on the gold electrode. The effects of monomer concentration and scan rate on the performance of the electrode were optimized. Excellent recognition capacity is found for p-NPh over chemically similar species. The DPV peak current is linearly related to concentration of p-NPh in the 0.1 μM to 1.4 mM range, with a 0.1 μM limit of detection (at S/N = 3).

Molecularly imprinted polymers (MIPs) and nanomaterials were combined to prepare a novel macroporous structured MIPs based electrochemical sensor for the investigation of an environmental pollutant, p-nitrophenol (p-NPh). The sensor exhibited a fast binding dynamics, good specific adsorption capacities, and high selective recognition to p-NPh.

     

Core-shell nanoparticles coated with molecularly imprinted polymers: a review

Core-shell surface molecular imprinting technology represents a rather new trend in analytical sciences. In this kind of material, the imprinting sites are located on the surface of the cores or shells of nanoparticles (NPs). This material can improve the capability of recognizing target molecules (analytes), reduce nonspecific adsorption, increase the relative adsorption capacity and selectivity, and accelerate the rate of mass transfer. This review (with 158 references) focuses on recent trends in core-shell MIPs. Following an introduction into the field, a first main section covers common core-materials including silica, magnetic NPs, quantum dots (including semiconductor quantum dots and carbon dots), gold and silver nanoclusters, and up-conversion materials. A further section covers the materials and reagents required for preparing MIPs (with subsections on templates, functional monomers, cross-linkers, initiators, and effects of solvent). A next main section covers synthetic approaches such as precipitation polymerization, emulsion polymerization, and grafting approach. A final section gives examples for applications of core-shell MIPs in analytical assays and in sensing.

Open image in new window

Graphical abstract This review (with 158 references) focuses on recent trends in core-shell nanoparticles coated with molecularly imprinted polymers (core-shell MIPs). Three significant synthesis methods are introduced: precipitation, emulsion and grafting approach. Applications of core-shell MIPs concentrate on solid phase extraction, fluorescent probe, surface-enhanced Raman scattering-based sensors and electrochemical sensors.

     

Clickable molecularly imprinted nanoparticles

Terminal alkynyl and azide groups are introduced on the surface of molecularly imprinted core-shell nanoparticles using precipitation polymerization. These clickable groups enable simple nanoparticle conjugation and surface modification under mild reaction conditions, opening new opportunities for nanoparticle-based assays and chemical sensing.     

Magnetic nanoparticles with an imprinted polymer coating for the selective extraction of uranyl ions

We have synthesized ferromagnetic nanoparticles with an imprinted polymer coating that is capable of adsorbing and extracting uranyl ions. The adsorbent was characterized using infrared spectroscopy, elemental analysis, X-ray powder diffraction analysis, and scanning electron microscopy. The effects of sample pH, sample volume, weight of the adsorbent, contact time and of other ions have been investigated in the batch extraction mode. The performance of the material was compared to that of particles coated with a non-imprinted polymer. The adsorbent containing the imprinted coating displays higher sorption capacity and better selectivity to uranyl ions. The method was successfully applied to the determination of uranyl ions in water samples.

Magnetic ion imprinted polymer nanoparticles for the preconcentration of vanadium(IV) ions

An ion imprinted polymer coated onto magnetite (Fe₃O₄) nanoparticles is shown to be a useful magnetic sorbent for the fairly selective preconcentration of vanadium. The sorbent was prepared by radical copolymerization of 3-(triethoxysilyl)propyl methacrylate (the monomer), ethylene glycol dimethacrylate (the cross-linker), and the vanadium(IV) complex of 1-(2-pyridylazo-2-naphthol) in the presence of magnetite nanoparticles. The material was characterized by IR spectroscopy, scanning electron microscopy, and thermal analysis. The vanadium(IV) ions were removed from the imprint by a solution containing thiourea and HCl, and the eluent was submitted to AAS. The analytical efficiency and relative standard deviation are 99.4 and ±2.3 %, respectively, under optimum conditions, and the limit of detection is 20 ng mL⁻¹. The method was successfully applied to the preconcentration and determination of vanadium(IV) ions in crude oil.

An ion imprinted polymer is coated on to magnetite nanoparticles as a useful magnetic sorbent for the fairly selective preconcentration of vanadium which can be used for vanadium determination in crude oil.

     

Immobilization of molecularly imprinted polymer nanoparticles in electrospun poly(vinyl alcohol) nanofibers

We describe the fabrication of polymer nanofibers with entrapped molecularly imprinted polymer (MIP) nanoparticles and study their possible use in a fluorescence-based biosensor application. The MIP was imprinted with the fluorescent amino acid derivative dansyl-L-phenylalanine. Poly(vinyl alcohol) was used as a support for MIP nanoparticles because it is water-soluble and can be spun into very thin fibers. The fibers were characterized by atomic force microscopy and optical microscopy, and fluorescence microscopy was used for the characterization of target binding to the MIP. The fibers show close to 100% recovery upon extraction and rebinding of the target molecule. The selectivity of the system has been demonstrated through competitive binding experiments with nonfluorescent analogues boc-L-phenylalanine and boc-D-phenylalanine.     

Magnetic ion imprinted polymer nanoparticles for the preconcentration of vanadium(IV) ions

An ion imprinted polymer coated onto magnetite (Fe₃O₄) nanoparticles is shown to be a useful magnetic sorbent for the fairly selective preconcentration of vanadium. The sorbent was prepared by radical copolymerization of 3-(triethoxysilyl)propyl methacrylate (the monomer), ethylene glycol dimethacrylate (the cross-linker), and the vanadium(IV) complex of 1-(2-pyridylazo-2-naphthol) in the presence of magnetite nanoparticles. The material was characterized by IR spectroscopy, scanning electron microscopy, and thermal analysis. The vanadium(IV) ions were removed from the imprint by a solution containing thiourea and HCl, and the eluent was submitted to AAS. The analytical efficiency and relative standard deviation are 99.4 and ±2.3 %, respectively, under optimum conditions, and the limit of detection is 20 ng mL^?1. The method was successfully applied to the preconcentration and determination of vanadium(IV) ions in crude oil. Figure

An ion imprinted polymer is coated on to magnetite nanoparticles as a useful magnetic sorbent for the fairly selective preconcentration of vanadium which can be used for vanadium determination in crude oil.     

Core-shell magnetic molecularly imprinted polymer nanoparticles for the extraction of triazophos residues from vegetables

The authors report on a surface molecular imprinting strategy for synthesizing magnetic and molecularly imprinted core-shell polymer nanoparticles (MMIPs) with a typical size of 320 nm. The triazophos-imprinted polymer shell on 180-nm magnetite particles (modified with 3-methacryloxypropyl trimethoxysilane) was obtained by radical polymerization of ethylene glycol dimethacrylate in the presence of triazophos, this followed by extractive removal of triazophos. The resulting MMIPs possess large binding capacity, high recognition selectivity, and fast binding kinetics for triazophos. They can be easily separated from a solution by using a magnet. These features result in a convenient and selective solid-phase extraction procedure for triazophos prior to its determination by UV spectrometry or by GC analysis. The method was successfully applied to the extraction and clean-up of triazophos residues in spiked homogenates of vegetables with recoveries in the range of 89.2 ~ 99.0%. The detection limits for triazophos by the UV assay and GC assay are 0.93 nM and 0.32 nM, respectively.

Open image in new window

Graphical abstract The core-shell magnetic molecularly imprinted polymer nanoparticles (MMIPs) with a nanoscale triazophos-imprinted polymer shell were prepared by surface imprinting onto the surfaces of 3-methacryloxypropyl trimethoxysilane (MATS) modified Fe₃O₄ magnetic nanoparticles. They were successfully applied for the extraction and clean-up of ultra trace triazophos residues in spiked homogenates of vegetable samples. MMIPs exhibit the larger binding capacity, faster binding kinetics, higher recognition selectivity, good reusability and stability, and excellent magnetic responses.

     

Ultrasensitive separation of methylprednisolone acetate using a photoresponsive molecularly imprinted polymer incorporated polyester dendrimer based on magnetic nanoparticles

We developed an approach for the use of polyester dendrimer during the imprinting process to raise the number of recognized sites in the polymer matrix and improve its identification ability. Photoresponsive molecularly imprinted polymers were synthesized on modified magnetic nanoparticles involving polyester dendrimer which uses the reactivity between allyl glycidyl ether and acrylic acid for the high‐yielding assembly by surface polymerization. The photoresponsive molecularly imprinted polymers were constructed using methylprednisoloneacetate as the template, water‐soluble azobenzene involving 5‐[(4, 3‐(methacryloyloxy) phenyl) diazenyl] dihydroxy aniline as the novel functional monomer, and ethylene glycol dimethacrylate as the cross‐linker. Through the evaluation of a series of features of spectroscopic and nano‐structural, this sorbent showed excellent selective adsorption, recognition for the template, and provided a highly selective and sensitive strategy for determining the methylprednisoloneacetate in real and pharmaceutical samples. In addition, this sorbent according to good photo‐responsive features and specific affinity to methylprednisoloneacetate with high recognition ability, represented higher binding capacity, a more extensive specific area, and faster mass transfer rate than its corresponding surface molecularly imprinted polymer.     

Molecularly imprinted polymer sensor arrays

An eight channel molecularly imprinted polymer sensor array was prepared that was able to differentiate six different aryl amine analytes, including diastereomers with 94% accuracy.     

Molecularly imprinted polymer coated magnetite nanoparticles as an efficient mefenamic acid resonance light scattering nanosensor

In this work, a mefenamic acid (MFA) nanosensor was synthesized by the aid of molecularly imprinted polymer (MIP) technique. MIP layer was coated on magnetite nanoparticles as magnetic nano-carriers. Synthesized nanoparticles were characterized using various measurements techniques. Light scattering properties of the synthesized nanoparticles in the presence or absence of MFA have been selected as the detection signal. In this regard, resonance light scattering has been used as the detection method. Various factors that can potentially affect light scattering efficiency (i.e., pH, ultrasonication time and nanoparticle dosage) were optimized using “one-at-a-time” method. A linear dynamic range was established from 100.0 to 2000.0 ng L⁻¹ of MFA and the limit of detection was found to be 50.0 ng L⁻¹ using the proposed method.     

Characterization of the selectivity of a phenytoin imprinted polymer

The selectivity of analytical methods based on molecularly imprinted polymers (MIPs) is due to the preferential adsorption of the analyte(s) as compared to other substances (interferences). This paper shows the theoretical and practical difficulties, which have to be considered and solved when real samples need to be analysed in a wide range of analyte and interferant concentrations. It is shown that the estimation of interference effects requires either many measurements or a realistic model of the adsorption equilibrium in mixed solutions of the analyte and the interferences. Examples are shown for positive (cooperative) interference effects, for better experimental design and interpretation of binary isotherm measurements and for establishing the chemical model of interference from selectivity measurements. The usual MIP model consisting of a cavity, which closely fits the shape of the template from all sides, appears unsuitable for this MIP, and it is replaced with a more realistic, more open model. The applicability of the results to using non-imprinted polymers as selective sorbents and to screening drug candidates is also shown.     

Synthesis and photoresponsive properties of a molecularly imprinted polymer

A photoresponsive molecularly imprinted polymer was prepared from a di(ureidoethylenemethacrylate)azobenzene monomer, using a methotrexate analogue as template. Photoisomerization of the 3D crosslinked polymer matrix allowed switching the substrate affinity by altering the geometry and spatial arrangement of the receptor binding sites. As a result, controlled release and uptake of the template (or analogous ligands) were obtained.     

Chromatographic characterization of a molecular imprinted polymer binding cortisol

A cortisol-binding polymer was prepared by utilising a non-covalent molecular imprinting polymerisation technique. The obtained polymer was packed in a high-performance liquid chromatography (HPLC) column; the selectivity was studied by liquid chromatography, eluting cortisol, cortisone, corticosterone, progesterone, 11-ketoprogesterone, 11alpha-hydroxyprogesterone, 17alpha-hydroxyprogesterone, cortisol 21-hemisuccinate, and cortisol 21-acetate with chloroform, containing 0.5% (v/v) acetic acid, as mobile phase. The mechanism of molecular imprinting was confirmed and a good selectivity for cortisol, with limited recognition for cortisone and 11alpha-hydroxyprogesterone, was found.