ASYMPTOTIC DYNAMIC SOLUTION TO THE MODE Ⅰ PROPAGATING CRACK-TIP FIELD IN ELASTIC-VISCOPLASTIC MATERIAL

A new elastic-viscoplastic mode was proposed to analyze the stress and strain fields surrounding the tip of a propagating mode Ⅰ cracks. A proper displacement pattern was suggested and asymptotic equations were derived, and numerical solutions were illustrated. The analysis and calculation show that the crack-tip field is of logarithmic singularity for smaller viscosity, however no solution exists for large viscosity. By a careful analysis and comparison, it is found that the present results retain all merits of those given by Gao Yu-chen, while removing existing problems.     

圆环旋转粘性液膜射流三维不稳定性研究

利用线性稳定性理论进行了射流液体粘性对圆环旋转液膜射流稳定性影响的研究,推导出了三维扰动下具有固体旋涡型速度分布的圆环旋转粘性液膜射流的色散方程;在此基础上进行了类反对称模式与类对称模式下的圆环旋转粘性液膜射流的三维不稳定性分析。研究结果表明,在类反对称模式下,液体粘性超过一定值后,射流最大扰动增长率随液体粘性的增加而迅速减小;轴对称模态的射流特征频率产生一个突降变化;随液体粘性增加,轴对称模态不稳定波数范围减小,非轴对称模态不稳定波数范围呈现出先减小后增大趋势。在类对称模式下,液体粘性对射流最大扰动增长率的影响主要体现在对非轴对称模态的影响上;液体粘性只在粘性较大时才会对非轴对称模态射流特征频率产生一定影响;液体粘性超过一定值后,轴对称模态与非轴对称模态的不稳定波数范围都会快速下降。     

圆环旋转黏性液体射流空间不稳定性研究

利用线性稳定性理论, 进行了液体黏性对不同旋转强度下圆环旋转液体射流 空间不稳定性影响的研究. 在推导出的三维扰动下具有固体涡核型旋转速度分布的圆环旋转 黏性液体射流色散方程的基础上, 针对中低速射流, 进行了类反对称模式与类对称模式下圆 环旋转黏性液体射流的空间不稳定性分析. 研究结果表明, 对于旋转强度较大的圆环旋转液 体射流, 液体黏性的增加, 不利于射流的破碎; 随着液体黏性的增加, 射流的特征频率和最 不稳定波数减小. 然而, 对于旋转强度较小的圆环旋转液体射流, 液体黏性的增加, 有利于 射流的破碎; 随着液体黏性的增加, 类反对称模式下射流特征频率先减小后增大, 类对称模 式下射流特征频率增大; 随着液体黏性的增加, 类反对称模式下射流最不稳定波数先减小后 增大, 类对称模式下射流最不稳定波数增大.     

Perfect elastic-viscoplastic field at mode I dynamic propagating crack-tip

The viscosity of material is considered at propagating crack-tip. Under the assumption that the artificial viscosity coefficient is in inverse proportion to power law of the plastic strain rate, an elastic-viscoplastic asymptotic analysis is carried out for moving crack-tip fields in power-hardening materials under plane-strain condition. A continuous solution is obtained containing no discontinuities. The variations of numerical solution are discussed for mode I crack according to each parameter. It is shown that stress and strain both possess exponential singularity. The elasticity, plasticity and viscosity of material at crack-tip only can be matched reasonably under linear-hardening condition. And the tip field contains no elastic unloading zone for mode I crack. It approaches the limiting case, crack-tip is under ultra-viscose situation and energy accumulates, crack-tip begins to propagate under different compression situations.     

I型定常扩展裂纹尖端的弹黏塑性场

考虑材料在扩展裂纹尖端的黏性效应，假设黏性系数与塑性应变率的幂次成反比，对幂硬化材料中平面应变扩展裂纹尖端场进行了弹黏塑性渐近分析，得到了不含间断的连续解，并讨论了I型裂纹数值解的性质随各参数的变化规律. 分析表明应力和应变均具有幂奇异性，并且只有在线性硬化时，尖端场的弹、黏、塑性才可以合理匹配. 对于I型裂纹，裂尖场不含弹性卸载区. 当裂纹扩展速度趋于零时，动态解趋于准静态解，表明准静态解是动态解的特殊形式；如果进一步考虑硬化系数为零的极限情况，便可退化为Hui和Riedel的非线性黏弹性解.     

Perfect elastic-viscoplastic field at mode Ⅰ dynamic propagating crack-tip

The viscosity of material is considered at propagating crack-tip. Under the assumption that the artificial viscosity coefficient is in inverse proportion to power law of the plastic strain rate, an elastic-viscoplastic asymptotic analysis is carried out for moving crack-tip fields in power-hardening materials under plane-strain condition. A continuous solution is obtained containing no discontinuities. The variations of numerical solution are discussed for mode Ⅰ crack according to each parameter. It is shown that stress and strain both possess exponential singularity. The elasticity, plasticity and viscosity of material at crack-tip only can be matched reasonably under linear-hardening condition. And the tip field contains no elastic unloading zone for mode Ⅰ crack. It approaches the limiting case, crack-tip is under ultra-viscose situation and energy accumulates, crack-tip begins to propagate under different compression situations.     

Instability of the interface in two-layer flows with large viscosity contrast at small Reynolds numbers

The Kelvin–Helmholtz instability is believed to be the dominant instability mechanism for free shear flows at large Reynolds numbers. At small Reynolds numbers, a new instability mode is identified when the temporal instability of parallel viscous two fluid mixing layers is extended to current-fluid mud systems by considering a composite error function velocity profile. The new mode is caused by the large viscosity difference between the two fluids. This interfacial mode exists when the fluid mud boundary layer is sufficiently thin. Its performance is different from that of the Kelvin–Helmholtz mode. This mode has not yet been reported for interface instability problems with large viscosity contrasts.These results are essential for further stability analysis of flows relevant to the breaking up of this type of interface.     

Elastic-viscoplastic field at mixed-mode interface crack-tip under compression and shear

For a compression-shear mixed mode interface crack, it is difficult to solve the stress and strain fields considering the material viscosity, the crack-tip singularity, the frictional effect, and the mixed loading level. In this paper, a mechanical model of the dynamic propagation interface crack for the compression-shear mixed mode is proposed using an elastic-viscoplastic constitutive model. The governing equations of propagation crack interface at the crack-tip are given. The numerical analysis is performed for the interface crack of the compression-shear mixed mode by introducing a displacement function and some boundary conditions. The distributed regularities of stress field of the interface crack-tip are discussed with several special parameters. The final results show that the viscosity effect and the frictional contact effect on the crack surface and the mixed-load parameter are important factors in studying the mixed mode interface crack- tip fields. These fields are controlled by the viscosity coefficient, the Mach number, and the singularity exponent.     

粘性可压混合层时间稳定性对称紧致差分求解

基于可压扰动方程组的一阶改型 ,将高精度对称紧致格式引入边值法数值线性稳定性分析。对所获非线性离散特征值问题给出了一个通用形式二阶迭代局部算法 ,实现了时间模式和空间模式的统一求解 ,并将扰动特征值及其特征函数同时得到。据此分析了可压平面自由混合层时间稳定性 ,涉及二维 /三维扰动波、粘性 /无粘扰动波、第一 /第二模态、特征函数、伪特征值谱等。研究表明 ,压缩性效应和粘性效应对最不稳定扰动波数和增长率呈相似的减抑作用 ;在 Mc=1附近 ,从高波数段开始 ,粘性效应可强化二维不稳定扰动波由第一模态向第二模态的过渡     

The structure and properties of long-chain branching poly(trimethylene terephthalate)

A multifunctional epoxide chain extender (ADR4370S) was used to increase the molecular weight of poly(trimethylene terephthalate) (PTT). And the effects of ADR4370S content on the molecular structure, melt viscosity, and rheological properties of PTT were studied. It is found that a star-type topological structure is formed in PTT by introduction of ADR4370S, and the balance torque, intrinsic viscosity, and molecular weight are increased by increasing ADR4370S dosage. The rheological measurement results show that the elastic modulus, complex viscosity, and shear thinning behavior of long-chain branching PTT are increased with the concentration of ADR4370S. The presence of broadened relaxation time spectrum and a long relaxation time mode for the PTT with 1.50 wt% ADR4370S demonstrate that the cross-linking reaction occurs, and the gel forms in the PTT system.     

双模态振幅调制原子力显微术对比度反转研究

双模态振幅调制原子力显微术广泛应用于微纳米力学成像,然而成像过程中可能存在的对比度反转问题会造成成像结果的难以理解和解释。将有限差分法和同相正交法相结合,采用数值方法研究了不同力常数探针、样品组分力学性能以及成像参数设置对双模态振幅调制原子力显微术二阶模态振幅和相位对比度反转的影响。研究结果显示,对于硬探针,不同粘度系数组分上二阶模态振幅和相位对比度随弹性模量增加无反转产生。探针在不同弹性模量组分上二阶模态振幅对比度随粘度系数增加会产生反转,而二阶模态相位对比度则无反转产生。对于软探针,组分弹性模量或粘度系数增加会造成相互作用区转变,使探针响应产生跳变。软探针在组分弹性模量较高时二阶模态相位对不同粘度系数的对比度以及在粘度系数较小时对不同弹性模量组分的对比度均较硬探针更低。两种探针在不同弹性模量组分上二阶模态振幅对比度随着二阶模态自由振幅的增加会发生反转,而不同粘度系数下的对比度则未出现反转。此外,二阶模态自由振幅越小,则二阶模态相位对不同弹性模量或粘度系数组分的对比度越高。二阶模态振幅或相位对比度在不同相互作用区可能会发生反转,成像时应使相互作用区处于排斥区,可提高对比度。     

压-剪混合型定常扩展裂纹尖端的弹黏塑性场

假定黏性系数与塑性等效应变率的幂次成反比,考虑其黏性和裂纹面摩擦接触效应 建立了压-剪混合型定常扩展裂纹尖端弹黏塑性场的渐近方程,求得了裂纹尖端场不含应力、应变间 断的数值解. 并讨论了压-剪混合型裂纹数值解随各个参数的变化规律,计算结果 和分析表明,压-剪混合型裂纹尖端场是满塑性的,不含有弹性卸载区,黏性效应是研究扩展裂纹尖端场时的一个重要因素. 无论混合裂纹趋近I型还是趋近II型,静水压力随摩擦系数的增加都是增加的,裂纹面摩擦 效应是阻止裂纹扩展速度的因素,且摩擦作用越强,裂纹尖端场的韧性越高.     

Axisymmetric and non-axisymmetric instability of an electrically charged viscoelastic liquid jet

A linear analysis is performed to investigate the competition between axisymmetric and non-axisymmetric instability of an electrically charged viscoelastic liquid jet. The liquid is assumed to be a dilute polymer solution modeled by the Oldroyd-B constitutive equation. As to its electric properties, the liquid is assumed to be of finite electrical conductivity and is described by the Taylor–Melcher leaky dielectric theory. An analytical dispersion relation is derived and the temporal growth rate is solved numerically. Two viscoelastic liquids, i.e. a PEO aqueous solution and a PIB Boger fluid, are taken as examples to study the effects of electric field and electrical conductivity on jet instability. The result shows that electric field basically destabilizes both the axisymmetric and the non-axisymmetric mode. On the other hand, the effect of electrical conductivity on the modes is quite limited. An energy analysis shows that elasticity enhances both axisymmetric and non-axisymmetric jet instability and its destabilization effect on the axisymmetric mode is more profound. For viscoelastic jets of high Deborah numbers the combined effect of viscosity and elasticity is possibly characterized by an equivalent Reynolds number related only to the viscosity of solvent.     

Instability analysis of nonlinear surface waves in a circular cylindrical container subjected to a vertical excitation

Singular perturbation theory of two-time scale expansions was developed both in inviscid and weak viscous fluids to investigate the motion of single surface standing wave in a liquid-filled circular cylindrical vessel, which is subject to a vertical periodical oscillation. Firstly, it is assumed that the fluid in the circular cylindrical vessel is inviscid, incompressible and the motion is irrotational, a nonlinear evolution equation of slowly varying complex amplitude, which incorporates cubic nonlinear term, external excitation and the influence of surface tension, was derived from solvability condition of high-order approximation. It shows that when forced frequency is low, the effect of surface tension on mode selection of surface wave is not important. However, when forced frequency is high, the influence of surface tension is significant, and can not be neglected. This proved that the surface tension has the function, which causes free surface returning to equilibrium location. Theoretical results much close to experimental results when the surface tension is considered. In fact, the damping will appear in actual physical system due to dissipation of viscosity of fluid. Based upon weakly viscous fluids assumption, the fluid field was divided into an outer potential flow region and an inner boundary layer region. A linear amplitude equation of slowly varying complex amplitude, which incorporates damping term and external excitation, was derived from linearized Navier–Stokes equation. The analytical expression of damping coefficient was determined and the relation between damping and other related parameters (such as viscosity, forced amplitude and depth of fluid) was presented. The nonlinear amplitude equation and a dispersion, which had been derived from the inviscid fluid approximation, were modified by adding linear damping. It was found that the modified results much reasonably close to experimental results. Moreover, the influence both of the surface tension and the weak viscosity on the mode formation was described by comparing theoretical and experimental results. The results show that when the forcing frequency is low, the viscosity of the fluid is prominent for the mode selection. However, when the forcing frequency is high, the surface tension of the fluid is prominent. Finally, instability of the surface wave is analyzed and properties of the solutions of the modified amplitude equation are determined together with phase-plane trajectories. A necessary condition of forming stable surface wave is obtained and unstable regions are illustrated.     

Wrinkling of a charged elastic film on a viscous layer

A thin metallic film deposited on a compliant polymeric substrate begins to wrinkle under compression induced in curing process and afterwards cooling of the system. The wrinkle mode depends upon the thin film elasticity, thickness, compressive strain, as well as mechanical properties of the compliant substrate. This paper presents a simple model to study the modulation of the wrinkle mode of thin metallic films bonded on viscous layers in external electric field. During the procedure, linear perturbation analysis was performed for determining the characteristic relation that governs the evolution of the plane-strain wrinkle of the thin films under varying conditions, i.e., the maximally unstable wrinkle mode as a function of the film surface charge, film elasticity and thickness, misfit strain, as well as thickness and viscosity of the viscous layer. It shows that, in proper electric field, thin film may wrinkle subjected to either compression or tension. Therefore, external electric field can be employed to modulate the wrinkle mode of thin films. The present results can be used as the theoretical basis for wrinkling analysis and mode modulation in surface metallic coatings, drying adhesives and paints, and microelectromechanical systems (MEMS), etc.     

弹性-触变性流体的定态剪切粘度与瞬态应力响应

用四种不同级数的动力学方程以表示分散物系内结构单元的聚集与解聚速率,并导出相应的定态和瞬态结构参数式。设弹性模量 G 与结构参数的关系具有与粘度函数相同的形式,求解 Maxwell 方程获得瞬态应力响应。 两种乳浊液的实验证明本文提出的流变模型可以表征弹性-触变性流体的流变性。用n=m=2 的模型可对这些乳浊液作出最佳模拟。     

Stability of the interface in two-layer couette flow of upper convected maxwell liquids

The linear stability of a two-layer Couette flow of upper convected Maxwell liquids is considered. The fluids have different densities, viscosities, and elasticities, with surface tension at the interface. At low speeds, the interfacial mode may become unstable, while other modes stay stable. The shortwave asymptotics of the interfacial mode is analyzed. It is found that an elasticity difference can stabilize or destabilize the flow even in the absence of a viscosity difference. As the viscosity difference increases, the range of elasticities for which there is shortwave stability widens. A linearly stable arrangement can be achieved by placing the less viscous fluid in a thin layer to stabilize longwaves and using elasticities to stabilize shortwaves. Such an arrangement can be stable even when the density stratification is adverse.     

Non-modal instabilities of two-dimensional disturbances in plane Couette flow of a power-law fluid

Instabilities of fluid flows have traditionally been investigated by normal mode analysis, i.e. by linearizing the equations of flow and testing for unstable eigenvalues of the linearized problem. However, the results of eigenvalue analysis agree poorly in many cases with experiments, especially for shear flows. In this paper we study the instabilities of two-dimensional Couette flow of a polymeric fluid in the framework of non-modal stability theory rather than normal mode analysis. A power-law model is used to describe the polymeric liquid. We focus on the response to external excitations and initial conditions by examining the pseudospectra structures and the transient energy growths. For both Newtonian and non-Newtonian flows, the results show that there can be a rather large transient growth even though the linear operator of Couette flow has no unstable eigenvalue. The effects of non-Newtonian viscosity on the transient behaviors are examined in this study. The results show that the “shear-thinning/shear-thickening” effect increases/decreases the amplitude of responses to external excitations and initial conditions.     

永磁激励下磁流变安全联轴器物理场数值仿真计算与分析

设计了一种新型磁流变安全联轴器,该联轴器以磁流变胶作为传力介质,以Halbach永磁排列作为磁场激励源.在COMSOL Multiphysics环境下建立了三维有限元分析模型;利用Bingham磁致本构模型对自行研制的磁流变胶的剪切屈服应力和粘度进行最小二乘5次多项式拟合,得到了剪切屈服应力和粘度随磁通密度的变化曲线参...