原位拉曼光谱技术用于反应和结晶控制研究进展

随着高分辨光谱技术和原位技术的发展,原位拉曼光谱的研制促进一系列原位微观物理化学行为及机理的研究,对材料的设计和应用有着重要意义.本文从拉曼光谱的原理及拉曼信号的影响因素出发,概述原位拉曼光谱技术用于反应和结晶控制的具体实例,总结原位拉曼光谱在化学反应和溶液结晶中晶体多态性、中间体和产物微观结构、化学键合模式等方面的研究进展,为研究反应及结晶机理提供重要线索,并对原位拉曼光谱技术的发展趋势进行了预测.     

Dynamics on the microsecond timescale in microporous aluminophosphate AlPO-14 as evidenced by 27Al MQMAS and STMAS NMR spectroscopy

Multiple-quantum magic angle spinning (MQMAS) and satellite-transition magic angle spinning (STMAS) are two well-known techniques for obtaining high-resolution, or "isotropic", NMR spectra of quadrupolar nuclei. It has recently been shown that dynamics-driven modulation of the quadrupolar interaction on the microsecond timescale results in linewidths in isotropic STMAS spectra that are strongly broadened, while, in contrast, the isotropic MQMAS linewidths remain narrow. Here, we use this novel methodology in an 27Al (I = 5/2) NMR study of the calcined-dehydrated aluminophosphate AlPO-14 and two forms of as-synthesized AlPO-14, one prepared with isopropylamine (C3H7NH2) as the template molecule and one with piperidine (C5H10NH). For completeness, the 31P and 13C (both I = 1/2) MAS NMR spectra are also presented. A comparison of the 27Al MQMAS and STMAS NMR results show that, although calcined AlPO-14 appears to have a rigid framework structure, the extent of motion in the two as-synthesized forms is significant, with clear evidence for dynamics on the microsecond timescale in the immediate environments of all four Al sites in each material. Variable-temperature 27Al STMAS NMR studies of the two as-synthesized AlPO forms reveal the dynamics to be complex, with the motions of both the guest water molecules and organic template molecules shown to be contributing. The sensitivity of the STMAS NMR experiment to the presence of microsecond timescale dynamics is such that it seems likely that this methodology will prove useful in NMR studies of host-guest interactions in a wide variety of framework materials.     

Use of Raman spectroscopy as an in situ tool to obtain kinetic data for organic transformations

Raman spectroscopy has been used as an in situ tool to obtain kinetic data for an organic transformation. The model reaction studied was the synthesis of 3-acetylcoumarin from the condensation between salicylaldehyde and ethyl acetoacetate with piperidine as a catalyst. The study shows that precise kinetic data can be obtained quickly and reproducibly, allowing for the facile determination of both overall reaction order and reaction order with respect to each component of the reaction. Additionally, Arrhenius parameters such as activation energy for a reaction can be readily obtained. In conjunction with computational modeling, this data-rich analysis technique also allows for in-depth probing of mechanistic aspects of reactions. Microwave heating proves to be an ideal tool for aiding in kinetic studies. It offers reproducible noncontact heating as well as precise temperature monitoring and data recording.     

Characterization of O2-CeO2 interactions using in situ Raman spectroscopy and first-principle calculations.

Interactions between O(2) and CeO(2) are examined experimentally using in situ Raman spectroscopy and theoretically using density-functional slab-model calculations. Two distinct oxygen bands appear at 825 and 1131 cm(-1), corresponding to peroxo- and superoxo-like species, respectively, when partially reduced CeO(2) is exposed to 10 % O(2). Periodic density-functional theory (DFT) calculations aid the interpretation of spectroscopic observations and provide energetic and geometric information for the dioxygen species adsorbed on CeO(2). The O(2) adsorption energies on unreduced CeO(2) surfaces are endothermic (0.91相似文献   

Glass crystallization in the MnNbOF5-BaF2-BiF3 system as probed by Raman spectroscopy

Crystallization of glass samples with compositions of 20MnNbOF₅-40BaF₂-40BiF₃, 20MnNbOF₅-30BaF₂-50BiF₃, and 30MnNbOF₅-30BaF₂-40BiF₃ has been studied using Raman spectroscopy. The study of band formation kinetics in high-frequency and low-frequency regions of the Raman spectrum provided information about the crystallization of the materials. The processes involved in glass crystallization have been found to be strongly dependent on the glass composition and annealing schedule. For 20MnNbOF₅-40BaF₂-40BiF₃ and 20MnNbOF₅-30BaF₂-50BiF₃ glasses, crystallization is accompanied by liquation, whereas for 30MnNbOF₅-30BaF₂-40BiF₃ glass, crystallization does not involve noticeable liquation effects and occurs in one step.     

In situ Raman spectroscopy as a probe for the effect of power on microwave-promoted Suzuki coupling reactions

We report the use of in situ Raman spectroscopy as a probe for the effect of power on microwave-promoted Suzuki coupling reactions. We find that increased initial microwave power leads to greater acceleration of the reaction but that the product yield obtained is essentially independent of initial microwave power. The application of simultaneous cooling lengthens the reaction time but does not alter the relative rates of the Suzuki coupling and deboronation processes. Performing the reaction at an initial microwave power of 5 W leads to an improvement in product yield.     

Structural transition in the surfactant layer that surrounds gold nanorods as observed by analytical surface-enhanced Raman spectroscopy

Surface-enhanced Raman spectroscopy (SERS) of gold nanorods in cetyltrimethylammonium bromide solution has been used to analyze the interfacial surfactant structure based on the distance-dependent electromagnetic enhancement. The spectra were consistent with a surfactant bilayer oriented normal to the surface. As the surfactant concentration was reduced, a structural transition in the surfactant layer was observed through a sudden increase in the signal from the alkane chains. The structural transition was shown to influence the displacement of the surfactant layer by thiolated poly(ethylene glycol). The monodisperse and thoroughly characterized gold nanorod samples yield consistent enhancement factors that were compared to electromagnetic simulations.     

Real-time monitoring of microwave-promoted organometallic ligand-substitution reactions using in situ Raman spectroscopy

An apparatus has been developed for real-time monitoring of organometallic reactions under microwave irradiation using in situ Raman spectroscopy and its application for monitoring ligand substitution reactions of Mo(CO)6 demonstrated.     

In situ analysis of mediaeval wall paintings: a challenge for mobile Raman spectroscopy

Raman spectroscopy is an analytical technique, which is gaining attention as a molecular technique for the investigation of objects of art. Especially the non-destructive properties of the method make this application suitable for the in situ analysis of artefacts. However, although using mobile, fibre optics Raman instrumentation for this type of research seems to be straightforward, some practical obstacles may hamper the investigation. In this paper, pitfalls and solutions are described when applying a dedicated spectrometer to the analysis of mediaeval wall paintings. It is shown how some practical problems may be overcome, and the results of the analysis are presented. Although the mediaeval wall paintings from the chapel of the castle of Ponthoz are well-preserved, still some interesting degradation phenomena could be observed: the identification of a black degradation product, likely to be meta-cinnabar, a degradation product of the red pigment vermilion (HgS); the formation of gypsum (CaSO₄·2H₂O) as a weathering product of calcium carbonate (CaCO₃); the observation of copper(II)hydroxychlorides.     

Raman spectroscopy with a low-cost imaging CCD array

An inexpensive CCD camera, normally used in amateur astronomy, was evaluated as a spectroscopic detector for Raman scattering. Mechanical modifications of the Santa Barbara Instruments Group ST-6 camera and software were developed specifically for the application and are described. The performance of the system is evaluated at various temperatures and integration times, and sample data are presented. Results indicate that this inexpensive detector can produce relatively high-quality Raman spectra under most conditions.     

电化学原位表面增强拉曼光谱研究Au@Pd纳米粒子薄膜电极上吸附 CO的斯塔克效应

电化学 Stark效应是指电极溶液界面的吸附物或金属-吸附物之间的化学键的振动频率随电极电势而发生变化的现象.研究该效应,可以更好地理解吸附物与基底的相互作用(如吸附构型、吸附取向和覆盖度等随电位的变化),也可反过来推断电极基底的电子构型及其随电势的变化规律,对理解电化学双电层的结构以及电催化反应的构效关系都很有帮助.多年以来,电极表面吸附 CO的电化学 Stark效应广受关注,是由于 CO为很多小分子氧化的中间产物,研究 CO的谱学行为,可加深对 CO以及其它能产生 CO中间物有机小分子的电催化氧化机理和动力学的理解;另一方面, CO与过渡金属之间普遍存在s给电子以及p反馈电子作用,因此 CO也可作为探针分子,通过考察 COad以及 M–COad的振动频率的变化,可推断相应条件下基底的电子与几何结构等信息.
　　本文使用电化学原位表面增强拉曼技术,在一个大的电势范围内考察了 Au@Pd纳米粒子薄膜电极上饱和吸附 CO的振动光谱行为,以期更好地理解 COad与基底的成键作用与电极电势之间的关系.由于纯 Pd电极表面的拉曼信号太弱,实验使用具有核壳结构的 Au@Pd纳米粒子薄膜作为模型电极,并利用 Au核的拉曼增强特性.宽广的电势范围约–1.5到0.55V vs. NHE,通过使用酸性、中性以及碱性电解质得以实现.实验考察的电势上限由 COad氧化起始电位决定,而下限由强烈氢析干扰测量所限制.结果表明,在检测的电势范围内, C–OM(M指在电极表面的桥式吸附CO和穴位吸附 CO所形成的谱带重叠)和 Pd–COM键的振动频率可以分为三段： dνC–OM/dE在–1.5~–1.2 V范围内是185~207 cm–1/V,在–1.2~–0.15 V是83~84 cm–1/V,在–0.2~0.55 V是43 cm–1/V;而 dνPd–COM/dE在–1.5~–1.2 V范围内是–10~–8 cm–1/V,在–1.2~–0.15 V是–31~–30 cm–1/V,在–0.2~0.55 V是–15 cm–1/V.与同时记录的极化曲线对比,认为在中性和碱性介质中所观察到 dνC–OM/dE在–1.2 V附近的急剧变化与电极表面发生了强烈的析氢反应有关.另外,结合密度泛函理论模型计算,认为共吸附的 H减少了 COad从桥式构型到穴位构型的转变,在酸性介质中这种变化不明显,可能是由于对应的电势较高,桥式吸附的 CO比例越大,桥式向穴位的转变本身相对较少.     

Monitoring the coordination of aluminium during microporous oxide crystallisation by in situ soft X-ray absorption spectroscopy

An in situ cell, which is capable of obtaining time resolved soft X-ray data (200 eV < E < 3000 eV) under hydrothermal conditions has been developed and used to study the self-assembly processes occurring during microporous aluminophosphate crystallization.     

Studies of thermal decay of electropolymerized polypyrrole using in situ surface-enhanced Raman spectroscopy

In this work, the thermal degradation of polypyrrole (PPy) films was investigated by using in situ surface-enhanced Raman spectroscopy (SERS) for the first time. The results indicate that the decay of PPy in conductivity can be ascribed to the loss in oxidation degree and to the shorter conjugation length of PPy upon heating samples from 25 to 75 °C. Continuously raising the temperature of the sample from 75 to 125 °C results in serious decay. The oxidation degree of PPy is significantly decreased correspondingly. However, the peak assigned to the CC backbone stretching becomes broader due to the thermal decomposition of PPy. At temperatures of samples higher than 125 °C, PPy films lose their conducting properties and no characteristic peaks of oxidized PPy related to the oxidation degrees can be observed. Moreover, the peak of the CC backbone stretching completely disappear due to the complete decomposition of PPy.     

In situ Raman spectroscopy of bias-induced structural changes in nitroazobenzene molecular electronic junctions

Carbon/nitroazobenzene (NAB)/titanium/gold molecular electronic junctions with active thicknesses of 7-8 nm were constructed having partially transparent Ti/Au top contacts, which permitted in situ monitoring of molecular structure with Raman spectroscopy for applied biases between +3 and -3 V. Deposition of the Ti/Au top contacts resulted in spectral changes similar to those accompanying NAB reduction in a conventional spectroelectrochemical experiment. Upon application of +3 V (carbon relative to Ti), the spectrum indicated reoxidation of the NAB reduction product, and this redox cycle could be repeated at least three times. When a voltage excursion to -2 or -3 V occurred, the spectra indicated irreversible loss of the nitro group, and a dramatic but reversible decrease in Raman intensity over the entire shift range examined. Negative applied voltage causes formation of reduced NAB and a high oxidation state of titanium, while positive voltage forms oxidized NAB and injects electrons into the titanium oxide layer. The spectral changes were correlated with current/voltage curves in order to probe the mechanism of rectification and conductance switching reported previously. Overall, the combination of spectroscopic and voltammetric results implies a conduction mechanism involving both NAB and titanium oxide, possibly mediated by the injection of carriers into the semiconducting titanium oxide, or by reduction of an insulating titanium oxide to a more conductive form.     

Surface-enhanced Raman spectroscopy as a probe of competitive binding by anions to citrate-reduced silver colloids

Citrate-reduced silver colloids (CRSCs) are used extensively for surface-enhanced Raman scattering (SERS) studies of cations but are typically found to be ineffective for detection of anions unless they are treated with compounds that give them positively charged coatings. In this work CRSCs which were suitable for detection of anions were generated by treatment with aggregating agents that did not bind strongly to the silver surface. Under these conditions the major factor determining the enhancement of added anions was their ability to displace whatever anions were already present. In the case of CRSCs, residual citrate was observed when the colloids were aggregated with sulfate salts, since neither sulfate nor the residual nitrate displaced it. On addition of more strongly binding anions, such as halides, the citrate was displaced and the bands of the added analyte appeared, allowing them to be detected without the need for creation of positively charged coatings. It was found that the relative affinities of the anions, as determined by displacement experiments monitored by SERS, followed the solubilities of their silver salts, presumably because both properties are strongly dependent on the strength of the Ag-anion bonds. The relative affinities determine which anions can be detected in the presence of which others; nitrate, sulfate, and perchlorate are lower in the series than citrate and so are not observed. Displacement experiments show that dipicolinic acid (DPA) and Cl(-) have similar (stronger) binding, but they can be displaced in turn by Br(-) and I(-), which have the highest affinity and lowest solubility. This model allows a broad range of previous observations to be rationalized and allows the experimental conditions suitable for detection of particular new analytes to be designed on rational principles.     

Unprecedented 3D entanglement of 1D zigzag coordination polymers leading to a robust microporous framework

One-dimensional zigzag coordination chains in four different directions are hierarchically entangled to generate an unprecedented 3D interwoven framework, which exhibits permanent porosity and guest selectivity.     

Using Raman spectroscopy to understand the origin of the phase transition observed in the crystalline sulfur based amino acid l-methionine

We present the Raman spectra of l-methionine (C₅H₁₁NO₂S) monocrystals obtained in the spectral region ranging from 3200 to 50 cm⁻¹ at temperatures from 20 to 375 K. We investigated the dynamics of the different functional groups in l-methionine and related their behaviour to the structural transition previously reported at about 307 K. Additionally, on cooling, changes in the intensities of some Raman bands were associated with conformational changes of at least one of the two l-methionine conformers in the monoclinic unit cell in the interval 160–140 K. Thermal analysis and DFT calculations provide further support to the interpretation of the Raman results.     

原位Raman光谱揭示中性条件下硫化钼结构变化对其电催化析氢反应的促进作用

硫化钼是析氢反应(HER)有前途的电催化剂. S-或Mo物种均被认为是形成吸附氢触发HER反应的活性位, 但Mo中心和S配体间相互作用的本质仍不清楚. 另外, 采用中性的水作为质子源用于产氢, 来开发低成本的水裂解催化剂体系为研究者高度关注, 但人们很少研究中性水条件下HER反应的机理. 本文采用原位电化学Raman光谱对所合成的硫化钼中Mo-Mo和S-S物种在中性条件下的结构变化进行了监测. 结果显示, 归属于端位S-S物种的谱带随着Mo-Mo, Mo3-μ3S和Mo-S振动谱带频率而同步变化, 表明Mo-Mo键与端位S-S键起着协同作用, 从而有利于氢气的生成. 这可能是通过三核Mo3-μ3S物种的内部重组而确认的. 本文所揭示的HER反应中金属-配体相互作用的本质与作用表明了一个不同的反应机理, 而以往的机理认为, S或Mo活性位独立起作用而促进HER反应的进行.     

Solid-liquid-liquid extraction as an approach to the sensitive detection of a hydrophobic pollutant through surface-enhanced Raman spectroscopy

Surface-enhanced Raman scattering (SERS) spectra of thiram (tetramethylthiuram disulfide), a dimethyl dithiocarbamate fungicide, were recorded after the adsorption on plasmonic silver nanowires from a system of water, organic solvent and nanoparticles. As organic solvents dichloromethane and 1-octanol were involved. A method for measuring the adsorption constant of thiram as a model molecule to the silver surface by studying its partition phenomena in a binary solvent system is presented. The method is based on the extraction of a hydrophobic molecule from an organic solvent by an aqueous suspension of silver anisotropic nanoparticles. The obtained results demonstrate the effectiveness of SERS methodology for the sensitive analysis of compounds with low aqueous solubility, and a reliable SERS spectrum of thiram was obtained with excellent signal/noise ratio at low concentrations. In addition, for vibrational assignments, Density Functional Theory (DFT) was used for the simulation of the Raman and SERS spectra of thiram and its complexes with silver considering the following two models: a single silver atom and an Ag₂₀ cluster.     

Identification of biotic and abiotic particles by using a combination of optical tweezers and in situ Raman spectroscopy.

A highly versatile setup, which introduces an optical gradient trap into a Raman spectrometer, is presented. The particular configuration, which consists of two lasers, makes trapping independent from the Raman excitation laser and allows a separate adjustment of the trapping and excitation wavelengths. Thus, the excitation wavelength can be chosen according to the needs of the application. We describe the successful application of an optical gradient trap on transparent as well as on reflective, metal-coated microparticles. Raman spectra were recorded from optically trapped polystyrene beads and from single biological cells (e.g., erythrocytes, yeast cells). Also, metal-coated microparticles were trapped and used as surface enhanced Raman spectroscopy (SERS) substrates for tests on yeast cells. Furthermore, the optical gradient trap was combined with a SERS fiber probe. Raman spectra were recorded from trapped red blood cells using the SERS fiber probe for excitation.