Selective reduction of monoesters of dicarboxylic acids

Summary A new laboratory method was proposed for the synthesis of esters of-hydroxy acids and lactones, based on the selective reduction of the monoesters of dicarboxylic acids with diborane.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 369–370, February, 1965     

Polymerization of styrene in the presence of organosilicon surfactants of various natures

The properties of polymer suspensions obtained with the use of organosilicon surfactants of various structures are compared. The polymer suspensions are characterized by a narrow particle size distribution and contain functional groups on their surface.     

Synthesis of bi-and tricyclic monoesters of dicarboxylic acids

A thermal addition of aliphatic dicarboxylic acids to bicyclo[2.2.1]-heptene hydrocarbons and to tricyclo[5.2.1.0^2,6]deca-3,8-diene was investigated and new samples of dicarboxylic acids alicyclic monoesters were synthesized. Some of monoesters synthesized have a pleasant fragrance and can find application as fragrance substances. They are also of interest as initial components for preparation of new organic compounds.     

Synthesis of monoesters ofD-sorbitol and aromatic acids

Water-soluble monoesters ofD-sorbitol with aromatic acids have been synthesized by the transesterification of their methyl esters. The structures of the compounds obtained have been confirmed by IR, UV, and¹³C NMR spectroscopies.A. B. Bekturov Institute of Chemical Sciences, Academy of Sciences of the Republic of Kazakhstan, Almaty [Alma-Ata], ul. Sh. Ualikhanova, 106, fax 61 57 65. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 735–737, September–October, 1997.     

Polymerization of styrene in presence of masticated rubber

The influence of the concentration of hydroperoxide (peroxide) groups in rubber (formed during mastication) and the influence of concentration of rubber on the polymerization of styrene were studied at 95, 105, 115 and 130°. The retardation effect of rubber (or non-rubber ingredients) is also due to the participation of less reactive (allylic) radicals from rubber on the termination. The derived kinetic relations allows calculation of a complex constant B* and the rate constant of decomposition of -OOH groups of rubber (k_d) at various temperatures; the latter are essentially smaller than those in masticated rubber. From kinetic analysis of experimental results, it follows that, during the polymerization of styrene in the presence of rubber, two types of rubber radicals can be formed, viz. a less reactive allylic radical and a more reactive alkyl radical.     

Counterion specificity of surfactants based on dicarboxylic amino acids

The behavior in solution of a series of amino acid-based surfactants having two carboxyl groups separated by a spacer of one, two, or three carbon atoms has been investigated. All three surfactants precipitated on addition of acid, but the aspartate surfactant (with a two-carbon spacer) was considerably more resistant to precipitation than the aminomalonate surfactant (one-carbon spacer) and the glutamate surfactant (three-carbon spacer). The interactions with the monovalent counterions lithium, sodium, and potassium were investigated by conductivity. It was found that lithium ions bound the strongest and potassium ions the weakest to the surfactant micelles. These results were interpreted using the hard and soft acid-base theory. Comparing the three surfactants with respect to binding of one specific counterion, sodium, showed that the aminomalonate surfactant, which has the shortest spacer, bound sodium ions the strongest and the glutamate surfactant, which has the longest spacer, had the lowest affinity for the counterion. Also that could be explained by the hard and soft acid-base concept. The glutamate surfactant was found to be considerably more resistant to calcium ions than the two other surfactants. This was attributed to this surfactant forming an intermolecular complex with the calcium ion at the air–water interface while the aminomalonate and the aspartate surfactants, with shorter distance between the carboxylate groups could form six- and seven-membered intramolecular calcium complexes.     

Preparation and properties of aromatic copolyamides from aromatic diisocyanates and aromatic dicarboxylic acids

Wholly aromatic random copolyamides of high molecular weights were prepared by the high-temperature solution polycondensation of an aromatic diisocyanate, 4,4′-methylenedi(phenyl isocyanate) or 2,4-tolylene diisocyanate, with a mixture of isophthalic acid and 4,4′-oxydibenzoic acid. Glass transition temperatures of the polyamides and copolyamides were between 229 and 273°C; this depended on the combination of diisocyanates and dicarboxylic acids used. These aromatic copolyamides showed better solubility in various organic solvents and reduced crystallinity, compared to the corresponding homopolyamides. The copolyamides prepared from 2,4-tolylene diisocyanate had greater solubility and higher glass transition temperatures than those obtained from 4,4′-methylenedi(phenyl isocyanate).     

The formation of polyethylene terephthalate in the presence of dicarboxylic acids

The process of polyethylene terephthalate (PET) formation in the presence of dicarboxylic acids has been studied. Certain amounts of terephthalic acid (TPA) have two- to threefold accelerating efficiency in the polycondensation process. To elucidate the causes of the acceleration the main reactions leading to PET formation in the presence of dicarboxylic acids have been investigated by the use of models. The evaluation of kinetic and equilibrium parameters obtained for model reactions made it possible to conclude that the influence of carboxyl-containing additives on the apparent rate of polycondensation manifests itself in accelerating direct reactions and facilitating the liberation of the eliminated by-product; that is, ethylene glycol (EG) from the polymer melt. Carboxylic acid acts as a catalyst on the ester interchange of 2-hydroxyethyl ester end groups and thus increases the rate of polymer formation in this reaction 10–40 times. The parallel interaction between the 2-hydroxyethyl ester end group and the carboxyl group of the added acid is also catalyzed by the acid and its rate constant is four times larger than that of the catalytic polycondensation of 2-hydroxyethyl ester end groups. Unlike EG, the reaction water formed in the process is more readily removed from the reaction system and thus promotes the intensification of the process. In addition, the carboxyl groups react with the eliminated EG to decrease its amount and shift the equilibrium toward polymer formation. The investigation of the consequent parallel reactions on models made it possible to draw a conclusion about the higher reactivity of 2-hydroxyethyl esters in the esterification processes. This fact has been explained by strengthening the nucleophilicity of the oxygen atom in the hydroxyl of a 2-hydroxyethyl ester group compared with that of EG; for example, by the formation of an intramolecular cycle involving a hydrogen bond. Simultaneously, it has been found that in the system simulating PET polycondensation in the presence of dicarboxylic acids the reaction mechanism involves the catalysis by a proton formed during the carboxyl group dissociation and accepted by the 2-hydroxyethyl ester group.     

Chromatographic and chromatospectral characteristic of dicarboxylic acid monoesters

Monoalkyl esters of benzene-1,2-dicarboxylic (phthalic) acid have not been reliably characterized by analytical parameters for their chromatographic and chromatospectral identification. Mass spectra of a series of monoalkyl phthalates (R = C₁–C₈) are discussed; their gas chromatographic retention indices on the RTX-5 polydimethylsiloxane stationary phase (5% phenyl groups) are determined. A linear dependence of indices on the number of carbon atoms in n-alkyl fragments of molecules and a correlation between the indices of any monoalkyl phthalates and corresponding diesters were used for the control of the data obtained. Using the last correlation, we found that most part of index values of mono (2-ethylhexyl) phthalate given in literature is wrong and, therefore, the results of identification of this compound in various samples must be revised. It was found that simplest monoalkyl phthalates are unstable during gas chromatographic separation, which may result in distortions of their mass spectra. To compare with monoalkyl phthalates, a similar series of monoesters of (Z)-butenedioic (maleic) acid was characterized. Retention indices of monoalkyl phthalates in reversed phase HPLC were determined and discussed.     

Gas chromatographic analysis of aromatic carboxylic acids in the presence of C1−C22 fatty acids and C2−C16 dicarboxylic acids esterified in aqueous solutions as the n-propyl esters

Summary The direct esterification and gas chromatographic analysis of aromatic carboxylic acids as n-propyl esters is described.Derivatization is performed in aqueous solution with n-propanol in the presence of sulfuric acid. The n-propyl esters of benzoic, phthalic, trimellitic and pyromellitic acids permit their gas chromatographic separation from each other and from fatty acids and aliphatic dicarboxylic acids. At mode ratios of [H₂O]/[n-PrOH]0.03 the water present does not interfere with the esterification reaction. At mole ratios above 0.03 anhydrous sodium sulfate is used for binding the water, at mole ratios of [Na₂SO₄anh.]/[H₂O]=0.51–1.52 and of [H₂SO₄]/[Na₂SO₄anh.]=0.43–1.28, respectively.     

Polymerization of styrene in the presence of nitroxide radicals of the dihydroimidazole series

2,2,5,5-Tetramethyl-4-phenyl-2,5-dihydroimidazole-1-oxyl and 2,2,5,5-tetramethyl-4-phenyl-2,5-dihydroimidazole-3-oxide-1-oxyl have been used as regulators of chain growth in the free-radical polymerization of styrene. It has been shown that the compounds of the dihydroimidazole series function as new living polymerization agents and allow the synthesis of polymers with low polydispersity coefficients and desired molecular masses.     

Polymerization of bis(2-oxazoline) compounds with dicarboxylic acids

A side reaction was found in the reaction of a 2-oxazoline compound with a carboxylic acid. It is an oxazoline ring opening addition to an amide group formed by the main reaction. In addition, certain phosphites were found to act as catalyst for the side reaction. The rate constants of the main and side reactions in the system of 2-phenyl-2-oxazoline and n-octanoic acid were obtained through simulation of the reactions on an analog computer. The side reaction makes it impossible for a very high molecular weight polymer to form in the reaction of a bis-2-oxazoline with a dicarboxylic acid, but makes it possible for a new crosslinked polymer to form when excess bis-2-oxazoline and a dicarboxylic acid are heated in the presence of a certain phosphite.     

Gas chromatographic analysis of aromatic,carboxylic acids in the presence of C1−C5 fatty acids and C2−C7 dicarboxylic acids esterified in aqueous solutions as the n-butyl esters

Summary The direct esterification and gas chromatographic analysis of aromatic carboxylic acids as n-butyl esters is described.Derivatization is performed in aqueous solution with n-butanol in the presence of sulfuric acid. The butyl esters of benzoic, phthalic, hemimellitic, trimellitic, trimesic and pyromellitic acids permit their gas chromatographic separation from each other and from fatty acids and alipatic dicarboxylic acids. At mole ratios of [H₂O]/ [n-BuOH]0.04 the water present does not interfere with the esterification reaction. At mole ratios above 0.04 anhydrous sodium sulfate is used for binding the water, at mole ratios of [Na₂SO₄ anh.]/[H₂O]=0.25–0.75.     

Electrochemical polymerization of dicarboxylic acids—I. Polymerization of adipic acid

The electrochemical polymerization of adipic acid via the Kolbe synthesis was investigated in various solvent systems. High melting insoluble polymers were obtained; they contained, besides the hydrocarbon chains obtained from the free radical Kolbe mechanism

ester groups obtained through the cationic mechanism

Polymer yield, as well as ester group content, increased on passing from methanol to methanol-pyridine (1:4). The structure of the polymers is discussed.