Heat and mass transfer in MHD non-Darcian flow of a micropolar fluid over a stretching sheet embedded in a porous media with non-uniform heat source and thermal radiation

A mathematical analysis has been carried out to study magnetohydrodynamic boundary layer flow, heat and mass transfer characteristic on steady two-dimensional flow of a micropolar fluid over a stretching sheet embedded in a non-Darcian porous medium with uniform magnetic field. Momentum boundary layer equation takes into account of transverse magnetic field whereas energy equation takes into account of Ohmic dissipation due to transverse magnetic field, thermal radiation and non-uniform source effects. An analysis has been performed for heating process namely the prescribed wall heat flux (PHF case). The governing system of partial differential equations is first transformed into a system of non-linear ordinary differential equations using similarity transformation. The transformed equations are non-linear coupled differential equations which are then linearized by quasi-linearization method and solved very efficiently by finite-difference method. Favorable comparisons with previously published work on various special cases of the problem are obtained. The effects of various physical parameters on velocity, temperature, concentration distributions are presented graphically and in tabular form.     

Splitting schemes for hyperbolic heat conduction equation

Rapid processes of heat transfer are not described by the standard heat conduction equation. To take into account a finite velocity of heat transfer, we use the hyperbolic model of heat conduction, which is connected with the relaxation of heat fluxes. In this case, the mathematical model is based on a hyperbolic equation of second order or a system of equations for the temperature and heat fluxes. In this paper we construct for the hyperbolic heat conduction equation the additive schemes of splitting with respect to directions. Unconditional stability of locally one-dimensional splitting schemes is established. New splitting schemes are proposed and studied for a system of equations written in terms of the temperature and heat fluxes.     

Heat transfer in MHD viscoelastic fluid flow over a stretching sheet with variable thermal conductivity,non-uniform heat source and radiation

An analysis has been carried out to study the magnetohydrodynamic boundary layer flow and heat transfer characteristics of a non-Newtonian viscoelastic fluid over a flat sheet with a linear velocity in the presence of thermal radiation and non-uniform heat source. The thermal conductivity is assumed to vary as a linear function of temperature. The basic equations governing the flow and heat transfer are in the form of partial differential equations, the same have been reduced to a set of non-linear ordinary differential equations by applying suitable similarity transformation. The transformed equations are solved analytically by regular perturbation method. Numerical solution of the problem is also obtained by the efficient shooting method, which agrees well with the analytical solution. The effects of various physical parameters such as viscoelastic parameter, Chandrasekhar number, Prandtl number, variable thermal conductivity parameter, Eckert number, thermal radiation parameter and non-uniform heat source/sink parameters which determine the temperature profiles are shown in several plots and the heat transfer coefficient is tabulated for a range of values of said parameters. Some important findings reported in this work reveals that combined effect of variable thermal conductivity, radiation and non-uniform heat source have significant impact in controlling the rate of heat transfer in the boundary layer region.     

A simulation code for investigating 2D heating of material bodies by low frequency electric fields

The finite difference method has been used to simultaneously solve in two dimensions Maxwell's equations and the heat transfer equation in forms which are appropriate to modelling low frequency electrical heating of solid materials. The nonlinear coupling of these modelling equations, which is due to temperature dependent electrical conductivities, necessitates the use of an explicit-sequential solution method and the limiting of the timestep size to ensure stability. The finite difference equations were modified to account for sharp electrical conductivity differences between different media in the body being heated.The simulation code was tested by comparison of the simulator predictions with the measured results of a physical scale model experiment. The simulation code was able to accurately predict the resistance between the electrodes used for heating, the energy deposition and the temperature rise in the bulk of the physical model.     

Analytical description of the radiative-conductive heat transfer in a gray medium contained between two diffuse parallel plates

Explicit analytical solutions for the temperature and heat flux in a gray medium contained between two diffuse parallel plates are derived for both pure thermal radiation and coupled conduction-radiation heat transfer. This is achieved by combining the integral equations for the heat flux and temperature predicted by the radiative transfer equation with the corresponding predictions of the discrete ordinates method. The algebraic formulation of this well-known method is used to derive analytical results that agree with their corresponding numerical ones with an accuracy greater than 99.9%, for a large interval of optical thicknesses and conduction-to-radiation factors. The explicit and original solutions, for both pure radiation and radiative-conductive heat transfer, therefore solve the problem of one dimensional steady-state heat transfer in gray cavities.     

半导体设备热传输中的隐式-显式多步有限元法

考虑热引导半导体设备中的传输行为，用一个有限元法离散电子位势所满足的Rpoisson方程；用隐式－显式多步有限元法处理电子密度和空洞密度满足的两个对流－扩散方程，热传导方程用隐式多步有限元法离散，推导了优化的L^2范误差估计。     

Heat transfer in granular materials: effects of nonlinear heat conduction and viscous dissipation

In this paper, we study the heat transfer in a one‐dimensional fully developed flow of granular materials down a heated inclined plane. For the heat flux vector, we use a recently derived constitutive equation that reflects the dependence of the heat flux vector on the temperature gradient, the density gradient, and the velocity gradient in an appropriate frame invariant formulation. We use two different boundary conditions at the inclined surface: a constant temperature boundary condition and an adiabatic condition. A parametric study is performed to examine the effects of the material dimensionless parameters. The derived governing equations are coupled nonlinear second‐order ordinary differential equations, which are solved numerically, and the results are shown for the temperature, volume fraction, and velocity profiles. Copyright © 2013 John Wiley & Sons, Ltd.     

Quasi-linearization and the Identification of Parameters in Partial Differential Equations

The method of quasi-linearization has been adapted to the problemof identifying parameters in partial differential equations.Convective and radiative heat transfer coefficients are obtainedfrom an equation that models the transient heating of a bedof spheres.     

Heat transfer in a Walter’s liquid B fluid over an impermeable stretching sheet with non-uniform heat source/sink and elastic deformation

In this present article an analysis is carried out to study the boundary layer flow behavior and heat transfer characteristics in Walter’s liquid B fluid flow. The stretching sheet is assumed to be impermeable, the effects of viscous dissipation, non-uniform heat source/sink in the presence and in the absence of elastic deformation (which was escaped from attention of researchers while formulating the viscoelastic boundary layer flow problems)on heat transfer are addressed. The basic boundary layer equations for momentum and heat transfer, which are non-linear partial differential equations, are converted into non-linear ordinary differential equations by means of similarity transformation. Analytical solutions are obtained for the resulting boundary value problems. The effects of viscous dissipation, Prandtl number, Eckert number and non-uniform heat source/sink on heat transfer (in the presence and in the absence of elastic deformation) are shown in several plots and discussed. Analytical expressions for the wall frictional drag coefficient, non-dimensional wall temperature gradient and non-dimensional wall temperature are obtained and are tabulated for various values of the governing parameters. The present study reveals that, the presence of work done by deformation in the energy equation yields an augment in the fluid’s temperature.     

Analytic transient solutions of a cylindrical heat equation with a heat source

The method of separation of variables is applied in order to investigate the analytical solutions of a certain two-dimensional cylindrical heat equation. In the analysis presented here, the partial differential equation is directly transformed into ordinary differential equations. The closed-form transient temperature distributions and heat transfer rates are generalized for a linear combination of the products of Fourier-Bessel series of the exponential type. Relevant connections with some other closely-related recent works are also indicated.     

热载荷作用下平面裂纹问题的奇异积分方程与边界无法

从边界积分方程出发,导出了二维裂纹体热传导问题及热弹性问题的积分方程组,继而使用奇异积分方程与边界元相结合的方法,为其建立了相应的数值求解方法。此外,利用奇异积分方程的主部分析法,严格地证明了裂纹尖端温度梯度场的1/√r 奇异性,并且给出了奇性温度梯度场的精确解。最后。对一些典型例子,做了数值计算。     

Application of homotopy analysis method for natural convection of Darcian fluid about a vertical full cone embedded in pours media prescribed surface heat flux

In this paper, a powerful analytical method, called homotopy analysis method (HAM) is used to obtain the analytical solution for a nonlinear ordinary deferential equation that often appear in boundary layers problems arising in heat and mass transfer which these kinds of the equations contain infinity boundary condition. The boundary layer approximations of fluid flow and heat transfer of vertical full cone embedded in porous media give us the similarity solution for full cone subjected to surface heat flux boundary conditions. Nonlinear ODE which is obtained by similarity solution has been solved through homotopy analysis method (HAM). The main objective is to propose alternative methods of solution, which do not require small parameters and avoid linearization and physically unrealistic assumptions. The obtained analytical solution in comparison with the numerical ones represents a remarkable accuracy. The results also indicate that HAM can provide us with a convenient way to control and adjust the convergence region.     

Group solution for unsteady free-convection flow from a vertical moving plate subjected to constant heat flux

The problem of heat and mass transfer in an unsteady free-convection flow over a continuous moving vertical sheet in an ambient fluid is investigated for constant heat flux using the group theoretical method. The nonlinear coupled partial differential equation governing the flow and the boundary conditions are transformed to a system of ordinary differential equations with appropriate boundary conditions. The obtained ordinary differential equations are solved numerically using the shooting method. The effect of Prandlt number on the velocity and temperature of the boundary-layer is plotted in curves. A comparison with previous work is presented.     

Heat transfer in unsteady axisymmetric second grade fluid

This work looks at the heat transfer effects on the flow of a second grade fluid over a radially stretching sheet. The axisymmetric flow of a second grade fluid is induced due to linear stretching of a sheet. Mathematical analysis has been carried out for two heating processes, namely (i) with prescribed surface temperature (PST case) and (ii) prescribed surface heat flux (PHF case). The modelled non-linear partial differential equations in two dependent variables are reduced into a partial differential equation with one dependent variable. The resulting non-linear partial differential equations are solved analytically using homotopy analysis method (HAM). The series solutions are developed and the convergence is properly discussed. The series solutions and graphs of velocity and temperature are constructed. Particular attention is given to the variations of emerging parameters such as second grade parameter, Prandtl and Eckert numbers.     

Analytical solutions to nonlinear equations arising in heat transfer by variational iteration,homotopy perturbation,and Adomian decomposition methods

As thermal conductivity plays an important role on fin efficiency, we tried to solve heat transfer equation with thermal conductivity as a function of temperature. In this research, some new analytical methods called homotopy perturbation method, variational iteration method, and Adomian decomposition method are introduced to be applied to solve the nonlinear heat transfer equations, and also the comparison of the applied methods (together) is shown graphically. © 2009 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 2010     

Similarity analysis of a nonlinear fin equation

A nonlinear fin equation in which the thermal conductivity is an arbitrary function of the temperature and the heat transfer coefficient is an arbitrary function of a spatial variable is considered. Scaling, translational and spiral group symmetries of the equations are determined. Classification of the functions for which these symmetries exist is performed. In general, no useful symmetries exist for arbitrary thermal conductivity and heat transfer coefficients. However, for some restricted forms of the functions, useful symmetries exist. A similarity transformation is used to reduce the partial differential equation to an ordinary differential equation as an example.     

Hall current effect on MHD mixed convection flow from an inclined continuously stretching surface with blowing/suction and internal heat generation/absorption

Hydromagnetic heat transfer by mixed convection along an inclined continuously stretching surface, with power-law variation in the surface temperature or heat flux, in the presence of Hall current and internal heat generation/absorption has been studied. The surface is considered to be permeable to allow fluid suction or blowing, and stretching with a surface velocity varied according to a power-law. Two cases of the temperature boundary conditions were considered at the surface. The governing equations have been transformed into non-similar partial differential equations which have been integrated by the forth-order Runge–Kutta method. The effect of Hall parameter, magnetic parameter, dimensionless blowing/suction parameter, space and temperature dependent internal heat generation/absorption parameters and buoyancy force parameters on the temperature, primary and secondary flow velocity have been studied parametrically. All parameters involved in the problem affect the flow and thermal distributions except the temperature-dependent internal heat generation/absorption in the case of prescribed heat flux (PHF). Numerical values of the local skin-friction and the local Nusselt numbers for various parametric conditions have been tabulated.     

Heat transfer analysis of the steady flow of an Oldroyd 8-constant fluid due to a suddenly moved plate

This paper concentrates on the heat transfer analysis of the steady flow of an Oldroyd 8-constant fluid due to a suddenly moved plate. The heat transfer analysis has been carried out for the prescribed surface temperature. Employing homotopy analysis method, the developed system of equations are solved analytically. The convergence of the obtained series solution is established. The influence of pertinent parameters on temperature profiles and Nusselt number is shown and discussed through several graphs. Further, a comparison between temperature profiles of Newtonian and Oldroyd fluids is also made.     

Heat transfer in MHD viscoelastic boundary layer flow over a stretching sheet with thermal radiation and non-uniform heat source/sink

An analysis has been carried out to study the flow and heat transfer characteristics for MHD viscoelastic boundary layer flow over an impermeable stretching sheet with space and temperature dependent internal heat generation/absorption (non-uniform heat source/sink), viscous dissipation, thermal radiation and magnetic field due to frictional heating. The flow is generated due to linear stretching of the sheet and influenced by uniform magnetic field, which is applied vertically in the flow region. The governing partial differential equations for the flow and heat transfer are transformed into ordinary differential equations by a suitable similarity transformation. The governing equations with the appropriate conditions are solved exactly. The effects of viscoelastic parameter and magnetic parameter on skin friction and the effects of viscous dissipation, non-uniform heat source/sink and the thermal radiation on heat transfer characteristics for two general cases namely, the prescribed surface temperature (PST) case and the prescribed wall heat flux (PHF) case are presented graphically and discussed. The numerical results for the wall temperature gradient (the Nusselt number) are presented in tables and are discussed.     

A finite element method for heat transfer of power‐law flow in channels with a transverse magnetic field

Heat transfer of a power‐law non‐Newtonian incompressible fluid in channels with porous walls has not been carefully studied using a proper numerical method despite a few constructions of approximate analytic solutions through the similarity transformation and perturbation method for Newtonian fluids (i.e. power‐law index being one). In this paper, we propose a finite element method for the thermal incompressible flow equations. The incompressible condition is treated by a penalty formulation. Numerical solutions are validated by comparing them with an approximate analytic solution of the Navier–Stokes equation in the Newtonian fluid case. Then, the method is used to simulate the heat transfer of various power‐law fluids. Additionally, unlike previous studies, we allow the thermal diffusivity to be a function of temperature gradient. The effect of different values of the parameters on the temperature and velocity is also discussed in this paper. Copyright © 2013 John Wiley & Sons, Ltd.