A sensitive method for the determination of iodine containing diagnostic agents in aqueous matrices using LC-electrospray-tandem-MS detection

Iodinated contrast media belong to the most frequently applied compounds in medicine. They exhibit a high polarity and are very persistent against metabolism by the organism and environmental degradation. A sensitive method for the determination of five iodinated contrast media in aqueous matrices is described. Solid phase extraction utilizing Isolute ENV+ material was used for sample enrichment. The contrast media were partially separated on a RP-C18 column, and detection was achieved using electrospray-tandem MS (API III plus and API 365) allowing the sensitive quantitation of these compounds down to the lower ng/L range. The recovery rates generally exceeded 70%, for spiked surface water as well as tap water. The analytes were detected in native samples such as municipal sewage treatment plant (STP) effluent, the river Rhine and even in tap water.     

A sensitive method for the determination of iodine containing diagnostic agents in aqueous matrices using LC-electrospray-tandem-MS detection

Iodinated contrast media belong to the most frequently applied compounds in medicine. They exhibit a high polarity and are very persistent against metabolism by the organism and environmental degradation. A sensitive method for the determination of five iodinated contrast media in aqueous matrices is described. Solid phase extraction utilizing Isolute ENV+ material was used for sample enrichment. The contrast media were partially separated on a RP-C₁₈ column, and detection was achieved using electrospray-tandem MS (API III plus and API 365) allowing the sensitive quantitation of these compounds down to the lower ng/L range. The recovery rates generally exceeded 70%, for spiked surface water as well as tap water. The analytes were detected in native samples such as municipal sewage treatment plant (STP) effluent, the river Rhine and even in tap water.     

Reactive Organometallic Compounds Obtained from Metallocenes and Related Compounds and Their Synthetic Applications

Progress in the synthesis of organometallic compounds via the partial or total degradation of metallocenes and related compounds under mild reaction conditions is reviewed. These degradation reactions permit highly reactive organo-transition metal complexes to be prepared which can in turn be used in a wide range of synthetic reactions. Examples include catalytic reactions such as the cobalt-catalyzed hydrogenation of benzene and the manganese-catalyzed cyclotrimerization of butadiene as well as stoichiometric syntheses of mono- and polynuclear transition metal complexes, some of which have novel structural features.     

纳米金属铁降解有机卤化物的研究进展

有机卤化物是一种毒性强、难生物降解的环境污染物,传统处理技术存在着降解不完全、效率低等不足。纳米技术的发展给有机卤化物的处理带来了一种新的颇具潜力的方法,即应用纳米金属/双金属颗粒对有机卤化物进行脱卤。目前,以Fe(Ⅱ) 和 Fe(Ⅲ)等常见原料合成纳米铁颗粒的技术已经成熟,纳米颗粒对有机卤化物也显示出高效的降解性能。更重要的是,其可灵活应用于地下水和土壤的原位和异位修复,尤其适用于原位修复。本文综述了纳米铁颗粒降解有机卤化物的研究进展,包括纳米铁颗粒的合成与修饰, 降解效能、降解机理、降解动力学、示范工程等,以及发展前景和今后的研究方向。     

Alkaline Soil Degradation and Crop Safety of 5-Substituted Chlorsulfuron Derivatives

Sulfonylurea herbicides can lead to serious weed resistance due to their long degradation times and large-scale applications. This is especially true for chlorsulfuron, a widely used acetolactate synthase inhibitor used around the world. Its persistence in soil often affects the growth of crop seedlings in the following crop rotation, and leads to serious environmental pollution all over the world. Our research goal is to obtain chlorsulfuron-derived herbicides with high herbicidal activities, fast degradation times, as well as good crop safety. On account of the slow natural degradation of chlorsulfuron in alkaline soil, based on the previously reported results in acidic soil, the degradation behaviours of 5-substituted chlorsulfuron analogues (L101–L107) were investigated in a soil with pH 8.39. The experimental data indicated that 5-substituted chlorsulfuron compounds could accelerate degradation rates in alkaline soil, and thus, highlighted the potential for rational controllable degradation in soil. The degradation rates of these chlorsulfuron derivatives were accelerated by 1.84–77.22-fold, compared to chlorsulfuron, and exhibited excellent crop safety in wheat and corn (through pre-emergence treatment). In combination with bioassay activities, acidic and alkaline soil degradation, and crop safety, it was concluded that compounds L104 and L107, with ethyl or methyl groups, are potential green sulfonylurea herbicides for pre-emergence treatment on wheat and corn. This paper provides a reference for the further design of new sulfonylurea herbicides with high herbicidal activity, fast, controllable degradation rates, and high crop safety.     

Remotion of organic compounds of actual industrial effluents by electron beam irradiation

Organic compounds has been a great problem of environmental pollution, the traditional methods are not effecient on removing these compounds and most of them are deposited to ambient and stay there for long time causing problems to the environment. Ionizing radiation has been used with success to destroy organic molecules. Actual industrial effluents were irradiated using IPEN's electron beam wastewater pilot plant to study organic compounds degradation. The samples were irradiated with and without air mixture by different doses. Irradiation treatment efficiency was evaluated by the Cromatography Gas Analyses of the samples before and after irradiation. The studied organic compounds were: phenol, chloroform, tetrachloroethylene (PCE), carbon tetrachloride, trichloroethylene (TCE), 1,1-dichloroethane, dichloromethane, benzene, toluene and xilene. A degradation superior to 80% was achieved for the majority of the compounds with air addition and 2kGy delivered dose condition. For the samples that were irradiated without air addition the degradation was higher.     

电化学催化氧化降解含酚废水的研究进展

酚类化合物具有高毒性,难降解性,国内外研究者越来越重视含酚废水的治理.电化学催化氧化技术在降解酚类化合物方面的研究较多.作者深入探讨了电化学催化氧化技术降解酚类化合物的机理和历程,概述了一些常用阳极材料的优缺点,最后指出了该技术存在的一些问题与发展前景.     

Analysis of structurally modified polyacrylamides by on-line thermochemolysis-GC–MS

Cationically modified polyacrylamides (cPAA) are commonly used flocculants in sewage water treatment processes. Therefore, those compounds are quantitatively important contaminants in sewage sludges, which were deposited on agricultural soils as fertilizers in the past and even today in many countries. In order to monitor environmental pathways and to correlate ecotoxicological effects with quantitative data, there is a necessity for methodologies for quantitative analyzes of technically applied polyacrylamides. The present investigation provides a fundamental proof of the verifiability of cPAA in particulate samples by on-line thermochemolysis-GC–MS in presence of tetramethyl ammonium hydroxide. This methodological approach induces degradation of cPAA to glutarimide related structures. Experiments were carried out on pure cPAA, spiked sediments and sewage sludges. The results revealed a linear correlation between thermochemically degraded quantities of cPAA and abundances of glutarimide related degradation products as well as a theoretical limit of detection of 250 mg/kg, which is sufficient for corresponding analyzes concerning sewage sludges. Thermochemolysis experiments on polyacrylamide and anionically modified derivates revealed the same glutarimide related degradation products as obtained by degradation of cPAA.     

Advances in the determination of degradation intermediates of personal care products in environmental matrixes: a review

In this review, recent methods developed for the determination of degradation intermediates of personal care products in environmental matrixes focusing on the extraction and determination steps are discussed. The five classes of personal care products evaluated are stimulants, fragrances, sunscreens, antimicrobials, and insect repellents. Methods are critically reviewed in terms of the analytical steps involved in the analysis, sample pretreatment, separation, and detection as well as the different confirmation strategies employed. Preconcentration from aqueous matrixes was performed by solid-phase extraction, liquid–liquid extraction, or solid-phase microextraction, allowing the simultaneous extraction of parent compounds and their degradation intermediates. Following the extraction and cleanup steps, the identification and quantification of degradation intermediates of personal care products at environmental levels (i.e., parts per trillion to parts per billion range) is usually performed by using mass spectrometry techniques such as single quadrupole mass spectrometry and more recently by time-of-flight mass spectrometry or tandem mass spectrometry. The main scope of this review is to critically evaluate the current state of the art of the analytical techniques used and to identify the research needs in the determination of degradation intermediates of personal care products in environmental matrixes.     

Multi-residue method for the analysis of synthetic surfactants and their degradation metabolites in aquatic systems by liquid chromatography-time-of-flight-mass spectrometry

Synthetic surfactants are economically important chemicals, as they are widely used in household cleaning detergents, textiles, paints, polymers and personal care products. In this work we have developed a method capable of the isolation and analysis of the most widely used surfactants (linear alkylbenzene sulfonates, LAS, nonylphenol ethoxylates, NPEO, and alcohol ethoxylates, AEO) and their main degradation products (sulfophenyl carboxylic acids, SPC, nonylphenol ethoxycarboxylates, NPEC, and polyethylene glycols, PEG) in aqueous and solid environmental matrices. First, analytes were extracted by ultrasonic extraction from sediments and suspended solids using methanol at 50°C as solvent and 3 cycles (30 min per cycle). Clean-up and pre-concentration of the extracts and water samples were carried out by solid-phase extraction (SPE), using Oasis HLB cartridges. Recoveries were generally about 80% for most compounds. Identification and quantification of target compounds were performed by liquid chromatography-time-of-flight-mass spectrometry (LC-ToF-MS), which has been much less used in the field of environmental analysis than other MS techniques. Examples which illustrate the possible advantages of this technique for multi-analyte analysis of target and non-target contaminants in environmental samples are provided. Finally, the methodology developed here was validated by measuring the concentration of surfactants and their metabolites in selected marine sediment and seawater samples collected in Long Island Sound (NY), and in influent and effluent wastewater from Stony Brook treatment plant (NY). This paper presents some of the first data relative to the occurrence of PEG in the environment, especially in sediments where concentrations were generally higher (up to 1490 μg/kg) than those for other classes of targeted surfactants and their metabolites.     

Liquid chromatography/time-of-flight mass spectrometric analyses for the elucidation of the photodegradation products of triclosan in wastewater samples

Liquid chromatography coupled with time-of-flight mass spectrometry (LC/TOFMS) was applied for the identification of four new photodegradation products of triclosan, a major antimicrobial agent used in personal care products. Wastewater samples, spiked at 7 microg/mL with triclosan, were irradiated with natural sunlight in order to generate the photodegradation products. Aliquots of the spiked water samples were taken at different times of irradiation and compounds were isolated from the water samples by solid-phase extraction. Separation and detection of the compounds and degradation products were accomplished by LC/TOFMS, which provided highly selective information about elemental compositions. Accurate mass measurements for the four degradation products permitted postulation of proposed empirical formulae in this study. Replacement of chlorine atoms by hydroxyl groups and chlorine losses are the major degradation pathways proposed. The degradation products were formed also under environmental conditions in wastewater matrices, thus suggesting their presence in real wastewater treatment processes.     

Biological-chemical treatment of soils contaminated with exploration and production wastes

Oil-gas exploration and production (E&P) soils contaminated with total petroleum hydrocarbons (TPHs) have been tested for degradation by two different treatments: biological and chemical. Biological treatment includes the use of native microorganisms for transformation of the various hydrocarbons found in E&P soils. Degradation of TPH of 80 and 86%, was achieved for two different soils, respectively in control experiments. The effect of growth stimulants such as glucose, acetic acid, and valeric acid was examined on TPH degradation. Incorporation of inducer (valerate) enhanced the degradation up to 89 and 93%, for the two soils, respectively. A large portion (> 41%) of contaminant in one soil was comprised of compounds in the carbon range of C₁₀-C₁₆ and < 7% constituted carbon range of C₂₄-C_28. The degradation of C₁₀-C₁₆ compounds was higher (> 98%) as compared to C₂₄-C₂₈ compounds (< 75%). Likewise, the degradation rate was also higher (58 mg/kg/d) for lower compounds as compared to higher carbon range compounds (6.7 mg/kg/d). Experiments conducted on chemical treatment included the effect of chelators on stabilization of H₂O₂, comparative studies between buffer and water (used for soil preparation), and the effect of pH on TPH degradation. The rate of oxygen evolution from H₂O₂ was significantly reduced with use of either chelated iron or phosphate buffer using naphthelene as a model compound. Chemical treatment demonstrated a higher degradation of TPH from contaminated soils at pH 4.0 as compared to a pH of 7.0. More degradation was obtained with slurry prepared in phosphate buffer as compared to deionized water.     

Analysis of structurally modified polyacrylamides by on-line thermochemolysis-GC–MS

Cationically modified polyacrylamides (cPAA) are commonly used flocculants in sewage water treatment processes. Therefore, those compounds are quantitatively important contaminants in sewage sludges, which were deposited on agricultural soils as fertilizers in the past and even today in many countries. In order to monitor environmental pathways and to correlate ecotoxicological effects with quantitative data, there is a necessity for methodologies for quantitative analyzes of technically applied polyacrylamides. The present investigation provides a fundamental proof of the verifiability of cPAA in particulate samples by on-line thermochemolysis-GC–MS in presence of tetramethyl ammonium hydroxide. This methodological approach induces degradation of cPAA to glutarimide related structures. Experiments were carried out on pure cPAA, spiked sediments and sewage sludges. The results revealed a linear correlation between thermochemically degraded quantities of cPAA and abundances of glutarimide related degradation products as well as a theoretical limit of detection of 250 mg/kg, which is sufficient for corresponding analyzes concerning sewage sludges. Thermochemolysis experiments on polyacrylamide and anionically modified derivates revealed the same glutarimide related degradation products as obtained by degradation of cPAA.     

Study of the photoinduced degradation of polycyclic musk compounds by solid-phase microextraction and gas chromatography/mass spectrometry

Polycyclic musks are widely used synthetic fragrances that have been identified during the last few years in biota samples and environmental matrices. Nevertheless, there is a lack of information concerning the photodegradation behavior of these compounds. In this work, the photoinduced degradation of six polycyclic musk compounds (Cashmeran, Celestolide, Phantolide, Galaxolide, Traseolide and Tonalide) was studied using a solid-phase microextraction (SPME) fiber as support. Musk fragrances were extracted from aqueous solutions using SPME fibers that were subsequently exposed to ultraviolet (UV) irradiation for different times. To study the degradation kinetics and to tentatively identify the photoproducts generated, gas chromatography coupled to ion trap mass spectrometry was used. Aqueous photodegradation studies were also performed. The on-fiber photodegradation approach avoids the need for further extraction processes and makes the identification of photoproducts easier, due to their higher concentration on the fibers. All musk compounds were easily photodegraded, suggesting that UV irradiation could work as a decontamination tool for these musks.     

Identification of transformation products from β‐blocking agents formed in wetland microcosms using LC‐Q‐ToF

Identification of degradation products from trace organic compounds, which may retain the biological activity of the parent compound, is an important step in understanding the long‐term effects of these compounds on the environment. Constructed wetlands have been successfully utilized to remove contaminants from wastewater effluent, including pharmacologically active compounds. However, relatively little is known about the transformation products formed during wetland treatment. In this study, three different wetland microcosm treatments were used to determine the biotransformation products of the β‐adrenoreceptor antagonists atenolol, metoprolol and propranolol. LC/ESI‐Q‐ToF run in the MS^E and MS/MS modes was used to identify and characterize the degradation products through the accurate masses of precursor and product ions. The results were compared with those of a reference standard when available. Several compounds not previously described as biotransformation products produced in wetlands were identified, including propranolol‐O‐sulfate, 1‐naphthol and the human metabolite N‐deaminated metoprolol. Transformation pathways were significantly affected by microcosm conditions and differed between compounds, despite the compounds' structural similarities. Altogether, a diverse range of transformation products in wetland microcosms were identified and elucidated using high resolving MS. This work shows that transformation products are not always easily predicted, nor formed via the same pathways even for structurally similar compounds. Copyright © 2016 John Wiley & Sons, Ltd.     

Multi-residue method for the analysis of 101 pesticides and their degradates in food and water samples by liquid chromatography/time-of-flight mass spectrometry

A comprehensive multi-residue method for the chromatographic separation and accurate mass identification of 101 pesticides and their degradation products using liquid chromatography/time-of-flight mass spectrometry (LC/TOF-MS) is reported here. Several classes of compounds belonging to different chemical families (triazines, organophosphorous, carbamates, phenylureas, neonicotinoids, etc.) were carefully chosen to cover a wide range of applications in the environmental field. Excellent chromatographic separation was achieved by the use of narrow accurate mass windows (0.05 Da) in a 30 min interval. Accurate mass measurements were always below 2 ppm error for all the pesticides studied. A table compiling the accurate masses for 101 compounds together with the accurate mass of several fragment ions is included. At least the accurate mass for one main fragment ion for each pesticide was obtained to achieve the minimum of identification points according to the 2002/657/EC European Decision, thus fulfilling the EU point system requirement for identification of contaminants in samples. The method was validated with vegetable samples. Calibration curves were linear and covered two orders of magnitude (from 5 to 500 microg/L) for most of the compounds studied. Instrument detection limits (LODs) ranged from 0.04 to 150 microg/kg in green-pepper samples. The methodology was successfully applied to the analysis of vegetable and water samples containing pesticides and their degradation products. This paper serves as a guide for those working in the analytical field of pesticides, as well as a powerful tool for finding non-targets and unknowns in environmental samples that have not been previously included in any of the routine target multi-residue methods.     

Electroscrubbers for removing volatile organic compounds and odorous substances from polluted gaseous streams

The treatment of waste gaseous streams has become an important topic of environmental concern. One promising technology is electroabsorption which combines two important treatment processes into a single unit. In this sense, this review compiles the information available in the recent literature showing the hybridization of absorption units with electrochemical cells for treatment of gases polluted with volatile organic compounds and odorous substances. This approach is compared with other competing technologies, paying special attention to the technology readiness level. Although from the laboratory tests, it appears to be a promising methodology for the degradation of volatile organic compounds and environmental odorous gases; this critical review points out that more research is needed to raise the technology readiness level of this treatment technology in a context in which the society is demanding more and more sustainable technologies.     

Influence of the solvent on the gas chromatographic behaviour of urea herbicides

Summary Degradation products of chlorsulfuron, chlortoluron, diuron, fluometuron, isoproturon, linuron, metabenzthiazuron, metobromuron, and monuron formed in the gas chromatographic injector have been used for identification of the respective herbicides. Mass spectra of the derived compounds were obtained with a quadrupole mass spectrometric detector working in scan mode (20–450 amu). The compounds generated often depended on the solvent used for phenylurea herbicide injection (ethanol, methanol, dichloromethane, and acetonitrile). When methanol and ethanol were used as solvents the major products formed from phenylureas were carbamic acid esters. When acetonitrile or dichloromethane were used the main derivatives were phenylisocyanates. Chlorsulfuron and metabenzthiazuron, however, generated a triazine plus a phenylsulfonamide and a benzothiazolamine, respectively, irrespective of the solvent used. Linuron and diuron behaved similarly and gave degradation products with the same mass spectra. The thermal reactions occurred instantaneously in the injector block and were promoted by the high temperature selected (300°C). Detemination of the compounds derived from urea herbicides, by use of a 30 m BP10 column and a selected ion registering (SIR) program based on two or three ions, can be used for sensitive detection of the presence of urea herbicides in environmental extracts. With standards in methanol instrument detection limits ranged from 0.1 pg for chlorsulfuron (detected as 2-chlorobenzensulfonamide) to 1 pg for monuron and metobromuron (both detected as their carbamic acid methyl esters).RSD were below 9% at the 5 ng L⁻¹ level. The response was linearly dependent on quantily (r>0.9986) in the 5 ng L⁻¹ to 25 μg L⁻¹ range. Unequivocal identification of some phenylurea herbicides was not always possible because some herbicides with similar structures, for example diuron and linuron, gave the same derivative.     

Phenolic compounds in Brassica vegetables

Phenolic compounds are a large group of phytochemicals widespread in the plant kingdom. Depending on their structure they can be classified into simple phenols, phenolic acids, hydroxycinnamic acid derivatives and flavonoids. Phenolic compounds have received considerable attention for being potentially protective factors against cancer and heart diseases, in part because of their potent antioxidative properties and their ubiquity in a wide range of commonly consumed foods of plant origin. The Brassicaceae family includes a wide range of horticultural crops, some of them with economic significance and extensively used in the diet throughout the world. The phenolic composition of Brassica vegetables has been recently investigated and, nowadays, the profile of different Brassica species is well established. Here, we review the significance of phenolic compounds as a source of beneficial compounds for human health and the influence of environmental conditions and processing mechanisms on the phenolic composition of Brassica vegetables.     

Degradation Products from Naturally Aged Paper Leaves of a 16th‐Century‐Printed Book: A Spectrochemical Study

In this work, we present a wide‐range spectrochemical analysis of the degradation products from naturally aged paper. The samples obtained from wash waters used during the de‐acidification treatment of leaves from a 16th‐century‐printed book were analysed through NMR, IR, Raman UV/Vis, EPR and X‐ray fluorescence (XRF) spectroscopy and HPLC‐MS and inductively coupled plasma (ICP) analysis. By these methods we also studied some of the previous samples treated by acidification (sample AP) and catalytic hydrogenation (sample HP). Crossing all the data, we obtained precise indications about the main functional groups occurring on the degraded, water‐soluble cellulose oligomers. These results point out that the chromophores responsible for browning are conjugated carbonyl and carboxyl compounds. As a whole, we show that the analysis of wash waters, used in the usual conservation treatments of paper de‐acidification, gives much valuable information about both the conservation state of the book and the degradation reactions occurring on the leaves, due to the huge amount of cellulose by‐products contained in the samples. We propose therefore this procedure as a new very convenient general method to obtain precious and normally unavailable information on the cellulose degradation by‐products from naturally aged paper.