Carbon linear chains inside multiwalled nanotubes

Multiwalled carbon nanotubes have been deposited on graphite cathodes by using an arc discharge technique in He atmosphere, with the insertion of a catalytic Ni-Cr mixture as well as without catalysers. The topography of such deposition has been investigated by SEM, while a parallel micro-Raman study has revealed, in particular regions of the deposited cathodes, strong bands in the range 1780-1860 cm⁻¹, assignable to linear carbon chains inside the nanotubes. The variation of intensity, frequency and bandwidth of such bands has been investigated, in relation with the spectral characters of the host multiwalled carbon nanotube. In the cathode deposited without catalyst a quite ordered configuration of multiwalled carbon nanotubes is obtained in the central zone, while the maximum concentration of linear carbon chains is found in a ring shaped zone just inside the border. In sample obtained with catalyst the deposited multiwalled carbon nanotubes appear always more disordered, and a remarkable concentration of carbon chains appears in some zones, with a more casual distribution.     

Gate-controlled superconductivity in a diffusive multiwalled carbon nanotube

We have investigated electrical transport in a diffusive multiwalled carbon nanotube contacted using superconducting leads made of an Al/Ti sandwich structure. We find proximity-induced superconductivity with measured critical currents up to I(cm)=1.3 nA, tunable by the gate voltage down to 10 pA. The supercurrent branch displays a finite zero bias resistance which varies as R(0) proportional to I(cm){-alpha} with alpha=0.74. Using IV characteristics of junctions with phase diffusion, a good agreement is obtained with the Josephson coupling energy in the long, diffusive junction model of A. D. Zaikin and G. F. Zharkov [Sov. J. Low Temp. Phys. 7, 184 (1981)].     

Electrical properties of multiwalled carbon nanotube film

The multiwalled carbon nanotube films examined in this study are produced by two methods: current annealing of carbon paper and dc magnetron sputtering. The conductivity and the temperature dependence of resistance of the samples are measured. The thermal conductivity of the film-substrate system is evaluated.     

Viscoelastic properties of multiwalled carbon nanotube solutions

We have prepared solutions of multiwalled carbon nanotubes in very low vapour pressure solvents (a mixture of chlorinated biphenyls). The solutions are stable and show no sign of precipitation for six months. Rheological measurements using a modified Birnboim apparatus with annular and Sogel-Pochetino geometries have been performed. Using time-temperature superposition we obtained the real and imaginary part of the complex viscosity coefficient in a frequency range covering eight orders of magnitude and a temperature range from 5 to 50 ^○C. The data shows unexpected changes in the solution with temperature: for T below 30 ^○C there appears to be some reorganization or clustering. This self-organization could result in a useful technique to improve the electronic properties of polymer/carbon nanotubes composites used in organic electronic devices.     

Hexagonal silicon nanotube confined inside a carbon nanotube: A first-principles study

We studied the stability, geometrical structures and electronic energy band of hexagonal silicon nanotube (SiNT) confined inside carbon nanotubes based on first-principle calculations. The results show that the encapsulating process of SiNT is exothermic in (9,9) carbon nanotube while endothermic in (8,8) and (7,7) carbon nanotubes. When the SiNT is inserted into (9,9) carbon nanotube, the insertion energy is about 0.09 eV. Energy band of SiNT@(9,9) nanotube is not distorted greatly compared with the superposition of bands of isolated SiNT and (9,9) carbon nanotube. Especially, a parabolic band occurs near the Fermi level of energy band in SiNT@(7,7) nanotube. Such a band could be a nearly free electronic state originating from carbon nanotube. Moreover, we discuss the variation of total energy as the SiNT rotates around its axis inside carbon nanotubes.     

Sonochemical growth of antimony sulfoiodide in multiwalled carbon nanotube

This paper presents for the first time the nanocrystalline, semiconducting ferroelectrics antimony sulfoiodide (SbSI) grown in multiwalled carbon nanotubes (CNTs). It was prepared sonochemically using elemental Sb, S and I in the presence of methanol under ultrasonic irradiation (35 kHz, 2.6 W/cm²) at 323 K for 3 h. The CNTs filled with SbSI were characterized by using techniques such as powder X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis, high-resolution transmission electron microscopy, selected area electron diffraction, and optical diffuse reflection spectroscopy. These investigations exhibit that the SbSI filling the CNTs is single crystalline in nature and in the form of nanowires. It has indirect forbidden energy band gap E_gIf = 1.871(1) eV.     

Sonochemical growth of antimony selenoiodide in multiwalled carbon nanotube

This paper presents, for the first time, the nanocrystalline, semiconducting antimony selenoiodide (SbSeI) grown in multi-walled carbon nanotubes (CNTs). It was prepared sonochemically using elemental Sb, Se, and I in the presence of ethanol under ultrasonic irradiation (35 kHz, 2.6 W/cm²) at 323 K for 3 h. The CNTs filled with SbSeI were characterized by using techniques such as powder X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis, high-resolution transmission electron microscopy, selected area electron diffraction, and optical diffuse reflection spectroscopy. These investigations exhibit that the SbSeI filling the CNTs is single crystalline in nature and in the form of nanowires. It has indirect allowed energy band gap E_gIf = 1.61(6) eV.     

Atomic force microscopy of bamboo-shaped multiwalled carbon nanotube structures

Atomic force microscopy (AFM) was employed for the morphology measurements of bamboo-shaped multiwalled carbon nanotubes (BS-MWNTs) grown by thermal chemical vapor deposition on Fe catalyst deposited SiO₂/Ti substrates. Greater diameters and compartment distances of the bamboo structures were observed for the BS-MWNTs grown at 950 °C than for those grown at 850 °C.     

Nanoscale high energetic materials: a polymeric nitrogen chain N(8) confined inside a carbon nanotube

We present a theoretical study of a new hybrid material, nanostructured polymeric nitrogen, where a polymeric nitrogen chain is encapsulated in a carbon nanotube. The electronic and structural properties of the new system are studied by means of ab initio electronic structure and molecular dynamics calculations. Finite temperature simulations demonstrate the stability of this nitrogen phase at ambient pressure and room temperature using carbon nanotube confinement. This nanostructured confinement may open a new path towards stabilizing polynitrogen or polymeric nitrogen at ambient conditions.     

Contact welding study of carbon nanotube with ZnO nanowire

Study of proton beam induced welding of multiwall carbon nanotubes (MWCNTs) with ZnO nanowires (NWs) has been carried out by proton (H⁺) beam irradiation. The samples were irradiated by 70-keV proton (H⁺) ion beams at different substrate temperatures. The irradiation-induced defects in CNTs and ZnO NWs were greatly reduced at elevated temperature. The crystalline structure of ZnO NWs and MWCNTs were found to remain stable after the irradiation at 700 K. As a preparation step, a coupling of two parallel ZnO NWs with irradiation has also been demonstrated. The welding mechanisms of MWCNTs and ZnO NWs were also been suggested. These two welding processes between same and distinct nanostructures to form homo- and hetero-junctions have provided an opportunity to mass produce interconnecting one-dimensional structures used for the manufacturing of future nanowire-based electronic circuits and devices.     

Size of the localized electron emission sites on a closed multiwalled carbon nanotube

We have measured the size of the localized electron emission sites on multiwalled carbon nanotubes (MWNTs) with caps closed by a fullerenelike structure. MWNTs were individually mounted on tungsten support tips and imaged with a field emission microscope (FEM). The magnification of the FEM was calibrated using electron ray tracing and verified by comparing transmission electron microscope images. The FEM image was also tested for effects of the lateral energy spread. We found ring-shaped emission areas with three flattened sides, of a radius of 1.7±0.3 nm, and separated by 5±1 nm.     

Disordered multiwalled carbon nanotube mat for light spot position detecting

Photovoltaic effects in a disordered multiwalled carbon nanotube mat/nickel heterostructure have been investigated. It is found that the photovoltage in the whole mat between two nickel electrodes under the irradiation of a 532-nm laser shows a single-valued function dependence on the light spot position, while it shows an almost linear dependence on light intensity. Based on the ‘position effect’, the prototype of the light spot position detector has been constructed for the applications of the disordered multiwalled carbon nanotubes in precision measurement. PACS 85.60.-q; 72.40.+w; 73.63.-b; 81.07.De; 78.67.-n     

多壁碳纳米管薄膜的压阻效应研究

对多壁碳纳米管薄膜的压阻效应进行了研究. 实验所用的多壁碳纳米管用热灯丝化学气相沉积法合成, 压阻效应用三点弯曲法测量. 研究发现: 在室温下与500微应变内, 原始的多壁碳纳米管薄膜无明显压阻效应, 而经化学修饰处理的碳纳米管膜的压阻因子最高可达120左右, 大大超过多晶硅(Si)在35°C时的压阻因子30, 并且压阻因子与制备方法密切相关. 重点讨论了多壁碳纳米管薄膜产生压阻效应的机制.     

Electrical characterization of PVA-based nanocomposite electrolyte nanofibre mats doped with a multiwalled carbon nanotube

An attempt has been made to prepare and characterise ammonium thiocyanate (NH₄SCN) salt and a multiwall carbon nanotube (MWNT)-doped polyvinyl alcohol-based nanofibre mats using an electrospinning process. The X-ray diffraction result shows an improvement in the amorphous nature of composite electrolyte fibre mats with increasing concentrations of the MWNT filler. The DSC behaviour of these nanofibre mat exhibits better thermal response upon dispersal of the filler. Composite electrolyte nanofibre mat doped with 6 wt% MWNT shows optimum conductivity, viz., 5.8?×?10^?4 Scm^?1. The temperature dependence of the bulk electrical conductivity displays a combination of Arrhenius and Vogel–Tammam–Fulcher nature. Dielectric loss studies have also been used to understand the conduction process in the system. Jonscher power law seems to be obeyed during ac conductivity measurements of the fibre mats.     

碳纳米管内金纳米线的结构与热稳定性

采用分子动力学模拟方法, 研究了填充在(8,8)单壁碳纳米管内的Au纳米线的结构和热稳定性. 研究表明, 经高温退火至室温, Au在碳纳米管内能生成多样而稳定的结构上明显区别于自由状态Au纳米线的壳层螺旋结构Au纳米线, 其螺旋结构会随着温度的变化而转变. 束缚在碳纳米管内的壳层螺旋结构Au纳米线有非常好的热稳定性, 稳定温度高于块体Au晶体的熔化温度. 关键词： 纳米线 碳纳米管 热稳定性 分子动力学模拟     

The structure and dynamics of water inside armchair carbon nanotube

In this paper we present some simulation results about the behaviour of water molecules inside a single wall carbon nanotube (SWNT). We find that the confinement of water in an SWNT can induce a wave-like pattern distribution along the channel axis, similar phenomena are also observed in biological water channels. Carbon nanotubes(CNTs) can serve as simple nonpolar water channels. Molecular transport through narrow CNTs is highly collective because of tight hydrogen bonds in the protective environment of the pore. The hydrogen bond net is important for proton and other signal transports. The average dipoles of water molecules inside CNTs (7,7), (8,8) and (9,9) are discussed in detail. Simulation results indicate that the states of dipole are affected by the diameter of SWNT. The number of hydrogen bonds, the water--water interaction and water--CNT interaction are also studied in this paper.     

Control of crystalline phases in magnetic Fe nanoparticles inserted inside a matrix of porous carbon

Two magnetic composites made up of Fe nanoparticles (Fe-NPs) embedded in a porous amorphous carbon matrix are presented. One of the samples, Fe-S-AC, was obtained with the aid of sucrose and the other, Fe-AC, in the absence of this substance. The XRD patterns show Bragg diffraction peaks associated with α-Fe and γ-Fe crystalline phases in the Fe-AC sample, while only peaks corresponding to the α-Fe phase are observed for Fe-S-AC powders. The Fe-NPs exhibit broad particle-size distributions for both samples, 5–50 nm for Fe-AC, whereas two populations (2–8 and 10–70 nm) for the Fe-S-AC composite are found. This fact gives rise to poorly defined blocking temperatures, as it can be deduced from the broad maxima observed in M_ZFC(T) variations. In addition, M(H) curves for both Fe-AC and Fe-S-AC samples reveal the existence of exchange-bias effect for T<60 K, probably due to a magnetic coupling within a core/shell structure of the Fe-NPs, although this effect was observed to be less significant for Fe-S-AC.     

多壁碳纳米管束储氢机理的X射线吸收谱研究

采用X射线吸收精细结构光谱探索性地研究了多壁碳纳米管束.在多壁碳纳米管束不同入射角的X射线吸收精细结构光谱中，观察到C—H σ^*共振峰强度随入射角的变化而发生变化.在常温常压下出现C—H键可能与多壁碳纳米管束中存在缺陷有关，缺陷数量越大C—H σ^*共振峰的强度越大.光谱中C—C π^*和C—C σ^*共振峰强度的变化趋势都不同于C—H σ^*共振峰，这有力地证明了在常温常压条件下氢原子是吸附在多壁碳纳米 关键词： X射线吸收精细结构光谱 碳纳米管 储氢 化学吸附     

Synthesis and characterization of multiwalled carbon nanotube/CdS core/shell heterostructures

Multiwalled carbon nanotube (MWCNT)/CdS core/shell heterostructures have been successfully synthesized via a simple solution-phase method. The thickness of CdS shells can be facilely tuned by either the reaction temperature or time. The CdS nanoparticles are first formed directly on the surface of MWCNT, and then a uniform CdS sheath is yielded via orientated aggregation processes. The present work provides a simple route to obtain MWCNT-based core/shell heterostructures and thus is of wide interest for the studies of nanomaterials and nanodevices.