Crystallization, mechanical properties and in vitro bioactivity of sol–gel derived Na2O–CaO–SiO2–P2O5 glass–ceramics by partial substitution of CaF2 for CaO

The partial substitution of CaF₂ for CaO in the Na₂O–CaO–SiO₂–P₂O₅ system was conducted by the sol–gel method and a comparison of the glass–ceramic properties was reported. Based on thermogravimetric and differential thermal analysis, the gels were sintered with a suitable heat treatment procedure. The glass–ceramic properties were characterized by X-ray diffraction, fourier-transform infrared spectroscopy, scanning electron microscopy, energy dispersive spectrometer and so on, and the bioactivity of the glass–ceramic was evaluated by in vitro assays in simulated body fluid. Results indicate that with the partial substitution of CaF₂ for CaO in glass composition, the volume density, apparent porosity, bending strength and microhardness of the glass–ceramics have been significantly improved. Furthermore, CaF₂ promotes glass crystallization which does not inhibit the glass–ceramic bioactivity.     

Structural studies of copper-containing multicomponent glasses from the SiO2–P2O5–K2O–CaO–MgO system

Multicomponent glasses from the SiO₂–P₂O₅–K₂O–MgO–CaO–CuO system acting as slow release fertilizers were synthesized by the melt-quenching technique. The influence of CuO and P₂O₅ addition on the structure of glasses was evaluated by FTIR, Raman, ³¹P, and ²⁹Si MAS NMR spectroscopies. The studies showed that the Cu²⁺ ions displacing Ca²⁺ ions and Mg²⁺ ions in the structure of glass prefer to associate with the phosphorus Q¹ species, forming the Q⁰ species with chemically stable POCu bonds. This is accompanied by the reduction of the degree of polymerization of the phospho-oxygen sub-network, with a simultaneous increased degree of polymerization of the silico-oxygen sub-network of the silicate–phosphate glasses.     

Structure of Na2O–MgO–CaO–SiO2 glasses by combined Raman spectroscopy and thermodynamic modeling approach

The present contribution deals with the Raman spectra and structure of Na₂O–MgO–CaO–SiO₂ glasses. Six glasses with the trisilicate overall composition 15Na₂O·xMgO·(10–x)CaO·75SiO₂ (x = 0, 2, 4, 6, 8, 10) were studied. The structure of studied glasses was described by the thermodynamic model of Shakhmatkin and Vedishcheva. From the 27 components with the stoichiometry given by the composition of stable crystalline phases, only eight were found in significant abundance in the studied glasses—namely: SiO₂, 2MgO·SiO₂ (M2S), MgO·SiO₂ (MS), Na₂O·3CaO·6SiO₂ (NC3S6), Na₂O·CaO·5SiO₂ (NCS5), Na₂O·MgO·4SiO₂ (NMS4), Na₂O·SiO₂ (NS), and Na₂O·2SiO₂ (NS2). The correlation analysis points out that the strong positive correlations between the equilibrium molar amounts of: {M2S–MS–SiO₂}, {NC3S6–NCS5}, and {NMS4–NS–NS2}. From the components of significant abundance, only the content of MS and NC3S6 change significantly within the studied compositional series. These two components were identified with the result of the principal component analysis of Raman spectra that indicated the presence of two independent spectral components. Using the method of Malfait the partial Raman spectra of MS and NC3S6 components were found. The obtained results very well reproduce the experimental Raman spectra and confirmed in such way the thermodynamic model.     

Surface characteristics and corrosion resistance of sol–gel derived CaO–P2O5–SrO–Na2O bioglass–ceramic coated Mg alloy by different heat-treatment temperatures

To improve the initial corrosion resistance and then make the degradation rate of magnesium alloys to meet the biomedical application, crack-free CaO–P₂O₅–SrO–Na₂O bioglass-ceramic coatings were synthesized on AZ31 magnesium alloy substrates using a sol–gel dip-coating technique followed by a heat-treatment in the temperature range of 400–500 °C. The effects of heat-treatment on the phase constituents, surface characteristics and corrosion resistances of the coatings were investigated. It was shown that the crystallization of Ca₂P₂O₇ occurred after the glass was treated at 400 °C. As the temperature increased from 400 °C to 450 °C, besides main phase Ca₂P₂O₇, β-Ca(PO₃)₂ and Ca₄P₆O₁₉ were identified as minor crystal phases in the glass–ceramic. No new phase was detected with the temperature increasing to 500 °C except for the further crystallization. Meanwhile, the water contact angles of the coatings decreased with the increase of heat-treatment temperature due to the great crystallization. The corrosion resistances of the coated magnesium alloys were studied by electrochemical corrosion techniques in the simulated body fluid. The results revealed that the coating heat-treated at 400 °C exhibited superior corrosion resistance because of less crystallization, suggesting that the calcium phosphate bioglass–ceramic coating can provide effective protection for magnesium alloy substrate to control its initial degradation in vivo and maintain the desired mechanical properties.     

Comparative study of the thermal behavior of Sr–Cu–O gels obtained by sol–gel and microwave-assisted sol–gel method

Journal of Thermal Analysis and Calorimetry - In the literature data, several papers reported the synthesis by various chemical or physical methods of the SrCu2O2 (SCO) having possible applications...     

Synthesis, characterization and flame retardant of UV-curable hybrid coatings containing SiO2–P2O5–B2O3 via sol–gel method

A ternary sol containing silicon, phosphorus and boron modified by ??-methacryloxypropyltrimethoxysilane was synthesized by sol?Cgel method. The ternary sol was incorporated into the organic matrix and UV-curable organic/inorganic hybrid coating materials were obtained. Hardness, transmittance, haze, cross-cut adhesion and abrasion resistance results showed that the mechanical properties of the hybrid coatings improved effectively with no comprising on optical properties by increasing sol content. Scanning electron microscopy and Energy Dispersive X-ray spectrometer studies indicated that inorganic particles were homogenously dispersed in the organic matrix. The flame retardancy of the UV-curable coatings was investigated by thermogravimetric analysis and microscale combustion calorimeter. The results showed that the incorporation of sol into the organic network led to an improvement in the thermal stability and flame retardancy of the hybrid coating materials. It is a desirable achievement to improve simultaneously both flame retardancy and mechanical properties of the coatings.     

Preparation of SiO2–wood composites by an ultrasonic-assisted sol–gel technique

The vacuum impregnation assisted sol–gel technique is a promising and environmentally-friendly method for the inorganic modification of wood by the formation of wood-inorganic composites. However, vacuum impregnation is relatively cumbersome and time-consuming. In this study, SiO₂–wood composites were prepared by an ultrasonic-assisted sol–gel method, which is an innovative and simple method. Using this method, we found an increase in the degree of silicon incorporation into the cell walls of the wood. The impregnation of silica inside the cell walls were verified by Fourier-transform infrared spectra, X-ray diffraction, scanning electron microscopy and energy dispersive spectrometry. Leaching test proved that the internal cross-linking silica is stably bonded to the wood cell walls. This modified method significantly reduced the hygroscopicity of the wood and consequently improved the mechanical performance of the modified wood. Thermogravimetric and differential thermal analyses showed that the incorporation of silicon retards thermal decomposition and the complete combustion of the wood matrix and it enhances the thermal stability of wood.     

Stereoselective inclusion mechanism of ketoprofen into β-cyclodextrin: insights from molecular dynamics simulations and free energy calculations

The host–guest inclusion mechanism formed between β-cyclodextrin and those poorly water-soluble drug molecules has important applications in supramolecular chemistry, biology and pharmacy. In this work, the chiral recognition ability of β-cyclodextrin to one of nonsteroidal anti-inflammatory drugs, ketoprofen, has been systematically investigated using molecular dynamics and free energy simulation methods. The R- and S-enantiomers of ketoprofen were explicitly bound within the cyclodextrin cavity in our simulations, respectively. In consistent with experimental observations, tiny structural difference between two isomers could be observed. Calculated absolute binding free energies using adapted biasing force (ABF) method and MM/GBSA approach for both isomers are comparable to experimental values. Significant binding fluctuations along the MD trajectory have been observed. The free energy profiles calculated using two different approaches reveal that the ketoprofen prefers binding in the cavity with the carboxylate group facing the wider edge of β-cyclodextrin. Similar free energy profiles for two enantiomers obtained using ABF calculations indicate that it is very hard to separate and identify the chiral conjugates within the framework of the natural β-cyclodextrin.     

Photocatalytic degradation of Orange II by titania addition to sol–gel glasses

Glasses on SiO₂–CaO–ZnO–B₂O₃–K₂O–Al₂O₃ oxide system modified by addition of titania (0, 3, 5, 12, and 20% w) have been prepared by sol–gel method. The obtained gels were aged, dried and fired at 600 °C/1 h in order to stabilise the glass. The resulting fired powders were characterised by UV–Vis–NIR spectroscopy, scanning electron microscopy, transmission electron microscopy (TEM) and X-ray diffraction (XRD). Their photocatalytic capacity on the degradation of Orange II dye has been studied. The XRD and TEM studies indicate that system becomes amorphous with a nanostructured microstructure. From UV–Vis–NIR results the band gap calculated is around 3.5 eV for all modified glasses. Photoactivity of powders depends on amount of titania in glass composition and the specific surface area of prepared samples. The sample with highest surface area and lowest addition of titania (3% w sample) shows similar activity than commercial anatase used as reference.     

Synthesis and characterization of Na2O–CaO–SiO2 glass–ceramic

The Na₂O–CaO–SiO₂ ternary glass–ceramic with the composition of 49 mass% Na₂O, 20 mass% CaO, and 31 mass% SiO₂ was prepared by the conventional method. The ternary glass–ceramic was characterized using X-ray diffraction (XRD), differential thermal analysis (DTA), thermogravimetric analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy techniques. The Na₂CaSiO₄ phase, having the cubic crystal system, with the crystallite size of 25.14 nm and lattice parameter of 0.7506 nm was determined from the XRD pattern. The activation energy of the glass–ceramic calculated from the DTA curves was found to be 162.02 kJ mol^?1. The Avrami exponent was found to be ~2 indicating a one-dimensional growth process. The mass loss percent from ambient temperature to 1,173 K is less than 1 %. The density was calculated to be 2,723 kg m^?3. The fine-grained microstructure with the particle sizes less than 1 μm was confirmed by the scanning electron microscope micrograph.     

Kinetics of nonisothermal crystallization of Cs2O–Fe2O3–P2O5 glasses

The crystallization kinetics of Cs₂O–Fe₂O₃–P₂O₅ glasses containing 12.5–27 mol% Cs₂O were studied by using differential scanning calorimetry under nonisothermal conditions. Strong dependence of activation energy with temperature was observed, indicating the complex nature of the crystallization process. The various crystallization products were identified by X-ray diffraction technique. CsFeP₂O₇ was found to be the major crystalline phase in all cases. The overall activation energy obtained by classical model-free kinetic method was compared with that of isoconversional method; and from the results, the dependence of activation energy on extent of reaction and average temperature was delineated.     

Fabrication and characterization of Zn3V2O8 phosphor by sol–gel process

By choosing zinc acetate dehydrate (Zn(CH₃COO)₂·2H₂O) and ammonium metavanadate (NH₄VO₃) as starting materials, we succeeded in fabricating Zn₃V₂O₈ phase suitable for broad light emission by sol–gel process. X-ray diffraction (XRD), scanning electron microscope, photoluminescence (PL) and PL quantum yield (PL-QY) measurements have been performed for analyzing the relation between crystallographic and light emission characteristics. The PL-QY is determined by both the crystalline phase purity of the Zn₃V₂O₈ phase defined by XRD patterns and the crystalline size. With optimizing the sintering condition at a slightly Zn-rich side, a pure Zn₃V₂O₈ phase with enough large crystalline size was obtained with the PL-QY value of 52 %, which was higher than our previously obtained value by solid state reaction.     

On synthesis of Fe2SiO4/SiO2 and Fe2O3/SiO2 composites through sol–gel and solid-state reactions

Major processing factors in forming Fe₂SiO₄/SiO₂ and Fe₂O₃/SiO₂ powders via sol–gel synthesis followed by solid-state reactions are investigated. The results clearly indicate that the chemical compositions of the precursors, the ratio of the precursors, the nature of the catalyst used, and the gas atmosphere during solid-state reactions can all affect the outcome of the reaction product(s). The formation of Fe₂SiO₄/SiO₂ is enhanced by using the precursor iron(III) acetylacetonate as the Fe source with the precursor ratio of iron(III) acetylacetonate to tetraethyl orthosilicate being 1:1 and the addition of formic acid. Otherwise, crystalline Fe and Fe₃C are formed in place of Fe₂SiO₄. By altering the gas atmosphere during solid-state reactions from argon to oxygen, the reaction products change from Fe₂SiO₄/SiO₂ to Fe₂O₃/SiO₂. All of the observed phenomena can be rationalized via the degree of mixing of the Fe–O and Si–O domains at the molecular level in the gel network during sol–gel reactions and the presence of a reducing or oxidizing atmosphere during the solid-state reaction.     

Structural study of the MO–Nd2O3 system obtained by a sol–gel procedure

The aim of the present work was to prepare a binary MO–Nd₂O₃ system by the sol–gel method and to characterise a series of mixed oxides belonging to the binary MO–Nd₂O₃ system (M = alkaline earth metal = Mg, Ca, Sr) to obtain suitable materials with catalytic properties. The molar ratio between the two oxides was MO/Nd₂O₃ = 95/5. Different precursors as alkaline earth metal oxide source (MO), various starting solution compositions expressed in various molar ratios between reactants and different synthesis parameters (pH, temperature and time of reaction) have been used. The structural study by X-ray diffraction analysis was accomplished based on the X-ray 5.0 program, which has established the presence of the mixtures of crystalline polyphases. The lattice constants, the average size of the crystallites, the average lattice strains and the mass of unit cell variation have been calculated. The program also allowed the calculus of the anisotropy factor, which can give the image of the structural disorder. The surface defects are a consequence of structural changes inside of the crystalline lattice of the solid solutions and are quite important for catalytic properties. Some catalytic activity measurements have established the potential of the prepared sol–gel mixed oxides to be used in the oxidative dehydrogenation process of light alkanes (C₁C₄). Sample 3SrNd was shown to present the best catalytic activity and selectivity in olefins in propane conversion (${\text{C}}_2^{=}\&{\text{C}}_3^{=}$) compared with 4Ca-Nd and 1Mg-Nd samples, which was interpreted as due to a better solid solution formation of Nd³⁺ in SrO, favoured by the close ionic radius of Sr²⁺ and Nd³⁺, as well as by the high basicity of Sr and the presence of a greater number of point defects.     

Distribution of species in Na2O–CaO–B2O3 glasses as probed by FTIR

The article presents a simple method that can be used to get the concentration of various species in mixed-modifier borate glasses. By using the fraction of four coordinated boron in xCaO (30 − x)Na₂O70B₂O₃ (0 ≤ x ≤ 27.5 mol%) and xCaO(40 − x)Na₂O60B₂O₃ glasses (10 ≤ x ≤ 40 mol%), the concentration of BO₄⁻ and asymmetric BO₃ units related to each modifier oxide could be determined. CaO has a greater tendency to form asymmetric BO₃ units in the first glass series, while Na₂O has the ability to form BO₄ units to a greater extent. In xCaO(40 − x)Na₂O60B₂O₃ glasses, BO₄⁻ and asymmetric BO₃ units are formed at the same rate from Na₂O and CaO. The fraction of four coordinated boron, can be predicted by treating the studied glasses as if they are mixtures of Na₂O–B₂O₃ and CaO–B₂O₃ matrices. The change in N₄ is due to change in the relative concentration of these matrices.     

Phase evolution and electrical properties of BaO–SrO–TiO2–SiO2–Al2O3-based glass ceramics prepared by sol–gel process

Crystallization of BaO–SrO–TiO₂–SiO₂–Al₂O₃-based glass ceramics, prepared by sol–gel process, was evaluated in terms of the effect of sintering temperature on phase evolution and electrical properties. The characterization of the samples was performed by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) studies and impedance spectroscopy analysis. The XRD results demonstrate that fresnoite phase starts to crystallize at 700 °C and perovskite phase appears at 900 °C. The glass ceramic samples sintered at high temperatures contained three crystalline phases, including perovskite, feldspar and fresnoite. In addition, SEM observation showed that the average grain size increased and the porosity decreased with increasing sintering temperature. Furthermore, the measurement of impedance spectroscopy suggests that there is a minimum value of the activation energy associated with the sintering temperature of the glass ceramics. The possible explanation of the sintering temperature dependence was discussed.     

Structural relaxation of PbO–WO3–P2O5 glasses

The structural relaxation of three compositional series of PbO–WO₃–P₂O₅ glasses with composition (0.5 ? x/2)PbO·xWO₃·(0.5 ? x/2)P₂O₅, x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5; 0.5PbO·xWO₃·(0.5 ? x)P₂O₅, x = 0, 0.1, 0.2, and 0.3; and (0.5 ? x)PbO·xWO₃·0.5P₂O₅, x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5 was studied by thermomechanical analysis. The structural relaxation was studied in the transformation region using the Tool–Narayanaswamy–Moynihan’s and Tool–Narayanaswamy–Mazurin’s models. The relaxation function of Kohlrausch Williams and Watts was used. The parameters of both models were calculated by nonlinear regression analysis of thermodilatometric curves measured by thermomechanical analyzer under the constant load. Both models very well describe the experimental data. It was found that the modulus is increasing with increasing amount of WO₃ in all glasses. On the contrary, the width of the spectrum of relaxation times is decreasing with increasing amount of WO₃ in all studied glasses. Both models possess the values of metastable melt thermal expansion coefficient equal to their experimental value.     

Preparation and characterization of crack-free sol–gel based SiO2–TiO2 hybrid nanoparticle film

Owing to the diverse potential applications of hybrid silica–titania thin films, the synthesis and characterization of these films have been carried out with a special focus on application as a medium index layer for multilayered functional coatings. For synthesis, tetraethylorthosilicate and titanium tetraisopropoxide were chosen as precursors for the formation of silica-titania hybrid thin films/nano-composites through an in situ sol–gel process. These films were sequentially obtained on Cu substrate utilizing spin coating. The hybrids were characterized by field emission scanning electron microscope, energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction, atomic force microscopy and Fourier transform infrared spectroscopy (FTIR). Field emission scanning electron microscope morphology displayed a smooth, densified and crack- free layer of silica-titania hybrid nanoparticles in the range of 20–71 nm after calcinations at low temperature of 300ºC for 1 h. X-ray diffraction pattern confirms the phases of titania with higher crystallinity and phase transformation at low temperature. The prepared films were uniform with low 8.852 nm RMS value. The stoichiometry of films was confirmed by EDX results. The FTIR spectroscopy indicated the establishment of heterogeneous chemical bonding between the Ti and Si surfaces through oxygen.     

Sol–gel preparation of mesoporous Al2O3–SiO2 glasses: structural evolution monitored by solid state NMR

Glasses along the composition line 0.5Al₂O₃–xSiO₂ (1 ≤ x ≤ 6) were prepared via a novel sol–gel route using tetraethylorthosilicate and aluminum lactate as precursors. The structural evolution from solution to gel to glass is monitored by standard ²⁷Al and ²⁹Si nuclear magnetic resonance (NMR) spectroscopies, revealing important insights about molecular level mechanisms occurring at the various stages of glass formation. Under the experimental conditions reported, silica and alumina precursors undergo homoatomic condensation processes when the gel is heat treated at about 100 and 300 °C, respectively, and only little heteroatomic co-condensation occurs in this temperature range. The latter is promoted only upon elimination of the residual lactate and water ligands upon annealing the gels above 300 °C. Following calcination at 650 °C, mesoporous glasses are obtained, having average pore diameter of about 3 nm and a surface areas near 500 m²/g. Si–O–Al connectivities are detected by ²⁹Si magic angle spinning (MAS)-NMR. ²⁷Al MAS-NMR spectra reveal aluminum in four-, five- and six-coordination. The spectra differ significantly from those of other sol–gel derived Al₂O₃–SiO₂ materials prepared from different precursor routes, suggesting that the lactate route results in a higher degree of compositional homogeneity.