氧化锌有序结构在Au(111)和Cu(111)上的生长

利用NO₂或O₂作为氧化剂,研究了氧化锌在Au(111)和Cu(111)上的生长和结构。NO₂表现了更好的氧化性能,有利于有序氧化锌纳米结构或薄膜的生长。在Au(111)和Cu(111)这两个表面上,化学计量比氧化锌都形成非极性的平面化ZnO(0001)的表面结构。在Au(111)上,NO₂气氛下室温沉积锌倾向于形成双层氧化锌纳米结构;而在更高的沉积温度下,在NO₂气氛中沉积锌则可同时观测到单层和双层氧化锌纳米结构。O₂作为氧化剂时可导致形成亚化学计量比的ZnO_x结构。由于铜和锌之间的强相互作用会促进锌的体相扩散,并且铜表面可以被氧化形成表面氧化物,整层氧化锌在Cu(111)上的生长相当困难。我们通过使用NO₂作为氧化剂解决了这个问题,生长出了覆盖Cu(111)表面的满层有序氧化锌薄膜。这些有序氧化锌薄膜表面显示出莫尔条纹,表明存在一个ZnO和Cu(111)之间的莫尔超晶格。实验上观察到的超晶格结构与最近理论计算提出的Cu(111)上的氧化锌薄膜结构相符,具有最小应力。我们的研究表明,氧化锌薄膜的表界面结构可能会随氧化程度或氧化剂的不同而变化,而Cu(111)的表面氧化也可能影响氧化锌的生长。当Cu(111)表面被预氧化成铜表面氧化物时,ZnO_x的生长模式会发生变化,锌原子会受到铜氧化物晶格的限域形成单位点锌。我们的研究表明了氧化锌的生长需要抑制锌向金属基底的扩散,并阻止亚化学计量比ZnO_x的形成。因此,使用原子氧源有利于在Au(111)和Cu(111)表面上生长有序氧化锌薄膜。     

Au(111)电极上CTAB吸脱附过程的循环伏安研究

本文运用循环伏安方法研究十六烷基三甲基溴化铵(CTAB)在Au(111)电极上的吸附行为. 首次给出CTAB在Au(111)电极上的循环伏安曲线,其0.18 V、0.27 V有两对可逆的特征电流尖峰,均受扩散控制,且与卤素离子种类有关. 研究表明,烷基铵阳离子的吸脱附及吸附层相转变与Au(111)电极表面结构密切相关.     

离子液体中Au(111)和Pt(111)表面Ge欠电位沉积的现场STM研究

本文研究BMIPF₆离子液体中Au(111)和Pt(111)表面Ge的电沉积行为. 循环伏安法测试结果表明,在含0.1 mol·L^-1 GeCl₄的BMIPF₆溶液Au(111)和Pt(111)表面均有两个与Ge沉积过程相关的还原峰. 第一个还原峰包含了Ge⁴⁺还原成Ge²⁺及Ge的欠电位沉积,第二个还原峰对应Ge的本体沉积. 现场扫描隧道显微镜研究结果表明,Ge在Au(111)和Pt(111)表面均有两层欠电位沉积. 第一层欠电位沉积厚度约为0.25 nm、形貌平整、带有缝隙的亚单层结构. 第二层欠电位沉积形貌相对粗糙的点状团簇结构. 该欠电位沉积过程伴随表面合金化.     

Schiff碱N-aete-N在Au(111)上自组装单分子膜的电化学及STM研究

利用电化学技术及扫描隧道显微镜(STM),于0.1mol/LHClO₄溶液中研究了Schiff碱N-aete-N在单晶Au(111)面上所形成的自组装单分子膜(SAMs)的电化学性质及结构.N-aete-N在Au(111)电极表面的吸附抑制了金的阳极氧化,同时使固/液界面双层电容明显降低.观察到N-aete-NSAMs的高分辨STM图像.N-aete-N分子在Au(111)表面上以(6×7)结构单胞呈二维有序排列,其表面浓度为5.5×10^-11mol/cm².     

Sb在Au单晶电极上结构敏感吸附行为的比较

本文研究比较Sb(III)在Au(111)和Au(100)电极上的不可逆吸附与还原和Sb的欠电位沉积行为及其相互影响.现场扫描隧道显微镜和循环伏安法测试结果表明,基底表面结构不仅影响阴离子的吸附行为和Sb的吸附结构,而且还影响其自身结构的稳定性.在Au(111)表面,致密无序膜的SbO+不可逆吸附层还原后基本保持原有的无序结构;而在Au(100)表面,由于SO42-的共吸附,不可逆吸附物种还原后形成(2×2)有序结构.在Au(111)表面上,Sb的欠电位沉积伴随显著的合金化,且因表面有序结构的破坏而形成沟道状二维结构;但对Au(100)表面,由于其晶格和尺寸与稳定的AuSb2合金之(100)面有较好的匹配性,使Au与Sb得以形成有序的表面化合物,从而避免了欠电位沉积过程中的表面合金化问题,进一步体现基底结构的敏感性和重要性.     

三聚氰胺与蜜勒胺在Au (111)表面的自组装和氢键识别

Melamine and melem molecules are widely used precursors for synthesizing graphitic carbon nitride (g-C₃N₄), the latter also a hot two-dimensional material with photocatalytic applications. The molecular structures of both are respectively identical to the repeating units of two distinct g-C₃N₄ phases. In this work, the adsorption and self-assembly of melamine and melem on an Au(111) surface were investigated with low-temperature scanning tunneling microscopy (STM). Particularly, the patterns of hydrogen bonds (HBs) in their assemblies were identified and compared. It was found that melamine can only form one type of HB and two kinds of assembly structures, whereas melem can form three types of HBs and six kinds of assembly structures in total. Moreover, the involved HBs can be transformed by tip manipulation. These findings may provide a new strategy for tuning the functionality of surface self-assemblies by manipulating intermolecular hydrogen bonds. This also paves a route for the in situ synthesis of g-C₃N₄ on metallic surfaces and subsequent investigations of their physicochemical properties.     

噻吩在M(111)(M=Pd,Pt,Au)表面的吸附(英文)

采用密度泛函理论(DFT),选取DMol3程序模块,对噻吩在M(111)(M=Pd,Pt,Au)表面上的吸附行为进行了探讨.通过对噻吩在不同底物金属上的吸附能、吸附构型、Mulliken电荷布居、差分电荷密度以及态密度的分析发现,噻吩在Pd(111)面上的吸附能最大,Pt(111)面次之,Au(111)面最小.吸附后,噻吩在Au(111)面上的构型几乎保持不变,最终通过S端倾斜吸附于top位;噻吩在Pd(111)及Pt(111)面上发生了折叠与变形,环中氢原子向上翘起,最终通过环平面平行吸附于hollow位.此外,噻吩环吸附后芳香性遭到了破坏,环中碳原子发生sp3杂化,同时电子逐渐由噻吩向M(111)面发生转移,M(111)面上的部分电子也反馈给了噻吩环中的空轨道,这种协同作用最终导致了噻吩分子稳定吸附于M(111)面.     

噻吩在M(111)(M=Pd,Pt, Au)表面的吸附

采用密度泛函理论(DFT), 选取DMol³程序模块, 对噻吩在M(111) (M=Pd, Pt, Au)表面上的吸附行为进行了探讨. 通过对噻吩在不同底物金属上的吸附能、吸附构型、Mulliken 电荷布居、差分电荷密度以及态密度的分析发现, 噻吩在Pd(111)面上的吸附能最大, Pt(111)面次之, Au(111)面最小. 吸附后, 噻吩在Au(111)面上的构型几乎保持不变, 最终通过S端倾斜吸附于top 位; 噻吩在Pd(111)及Pt(111)面上发生了折叠与变形, 环中氢原子向上翘起, 最终通过环平面平行吸附于hollow 位. 此外, 噻吩环吸附后芳香性遭到了破坏, 环中碳原子发生sp³杂化, 同时电子逐渐由噻吩向M(111)面发生转移, M(111)面上的部分电子也反馈给了噻吩环中的空轨道, 这种协同作用最终导致了噻吩分子稳定吸附于M(111)面.     

半冠醚配体在Au(111)电极表面上的有序阵列的原位STM研究

利用电化学扫描隧道显微术(ECSTM)和循环伏安法, 研究了三个半冠醚配体在Au(111)表面上的吸附结构. 虽然配体分子的几何结构复杂、对称性较差, 但在Au(111)电极表面, 均形成了有序的阵列, 这是分子-分子间相互作用与分子-基底间相互作用平衡的结果. 高分辨率STM图像揭示了有序阵列中分子的内部结构、取向、排列方式等. 该研究为通过过渡金属调控的纳米结构制备提供了实验依据.     

一氧化碳共吸附法确定叔丁胺分子在Cu(111)表面的吸附位

采用扫描隧道显微镜(STM)和密度泛函理论(DFT)研究了78 K时单个叔丁胺分子在Cu(111)表面的吸附位. 我们提出以共吸附的一氧化碳√3 ×√3 超结构为基底铜原子的标识方法, 确定了低覆盖度的叔丁胺分子在Cu(111)表面的吸附位为顶位. 而采用单个一氧化碳分子标识基底铜原子的位置, 同样得出了叔丁胺分子的吸附位为顶位. 此外, 还采用DFT计算叔丁胺分子在Cu(111)表面的优势吸附构型. 理论计算结果表明顶位吸附构型为能量最稳定的构型, 与实验结果相吻合.     

Long‐Range Chirality Recognition of a Polar Molecule on Au(111)

Chiral molecular self‐assemblies were usually achieved using short‐range intermolecular interactions, such as hydrogen‐, metal–organic, and covalent bonding. However, unavoidable surface defects, such as step edges, surface reconstructions, or site dislocations may limit the applicability of short‐range chirality recognition. Long‐range chirality recognition on surfaces would be an appealing but challenging strategy for chiral reservation across surface defects at long distances. Now, long‐range chirality recognition is presented between neighboring 3‐bromo‐naphthalen‐2‐ol (BNOL) stripes on an inert Au(111) surface across the herringbone reconstruction as investigated by STM and DFT calculations. The key to achieving such recognition is the herringbone reconstruction‐induced local dipole accumulation at the edges of the BNOL stripes. The neighboring stripes are then forced to adopt the same chirality to create the opposite edged dipoles and neutralize the neighbored dipole moments.     

Electrochemical Studies of the Benzoate Adsorption on Au (111) Electrode

Cyclic voltammetry (CV), differential capacity (DC), and charge densitymeasurements have been employed to study the benzoate (BZ) adsorption at the Au(111)electrode surface. Thermodynamic analysis of charge density (_M) data has beenperformed to describe the properties of the adsorbed benzoate ion. The Gibbsexcess , Gibbs energy of adsorption G, and the number of electrons flowingto the interface per adsorbed benzoate ion at a constant potential (electrosorptionvalency) and at a constant bulk concentration of the benzoate (reciprocal of theEsin—Markov coefficient) have been determined. The results demonstrate thatalthough benzoate adsorption starts at negative charge densities, it takes placepredominantly at a positively charged surface. At the most positive potentials,the surface concentration of benzoate attains a limiting value of about 7.3×10^–10mol-cm^–2, which is independent of the bulk benzoate concentration. This valueis consistent with packing density corresponding to a closed-packed monolayerof vertically adsorbed benzoate molecules. At negative charge densities, benzoateassumes a flat (-bonded) surface coordination. The surface coordination ofbenzoate changes, by moving from a negatively to positively charged surface.At the negatively charged surface, the electrosorption bond is quite polar. Thepolarity of the chemisorption bond is significantly reduced due either to a chargetransfer or a screening of the charge on the anion by the charge on the metal.     

Au单晶表面氟表面活性剂FSN自组装膜的电化学行为

研究Au(111)和Au(100)表面非离子型氟表面活性剂FSN自组装膜的电化学行为.电化学扫描隧道显微术和循环伏安法测试表明,在0～0.8 V电位区间,FSN自组装膜未发生氧化还原,均一性好,可稳定地存在于电极表面,并显著抑制硫酸根离子在电极表面的吸附和Au单晶表面的重构.在FSN自组装膜Au单晶电极的初始氧化阶段,Au(111)表面有少量突起,而Au(100)表面呈现台阶剧烈变化,但FSN自组装膜的吸附结构没有改变.与Au(100)表面相比,Au(111)表面形成的FSN自组装膜可更有效地抑制Au表面的氧化.     

单原子分散的Au/Cu(111)表面合金的表面结构与吸附性质

Au-Cu双金属合金纳米颗粒对包括CO氧化和CO2还原等在内的多个反应有较好的催化活性,然而关于其表面性质的研究却相当匮乏。在此工作中,我们通过对低覆盖度的Au/Cu(111)和Cu/Au(111)双金属薄膜退火,制备出了单原子级分散的Au/Cu(111)和Cu/Au(111)合金化表面,并利用高分辨扫描隧道显微镜(STM)和扫描隧道谱(STS)进一步研究了掺杂原子的电子性质及其对CO吸附行为的影响。研究发现,分散在Cu(111)表面的表层和次表层Au单原子在STM上表现出不同衬度。在-0.5 e V附近,前者表现出相较于Cu(111)明显增强的电子态密度,而后者则明显减弱。吸附实验表明表层Au单原子对CO的吸附能力并没有得到增强,甚至会减弱其周围Cu原子的吸附能力。与Au在Cu(111)表面较好的分散相反,Cu原子倾向于钻入Au(111)的次表层,并且形成多原子聚集体。且Cu原子受Au(111)衬底吸电子作用的影响,其对CO的吸附能力明显减弱。这个研究结果揭示了合金表面的微观结构与性质的关联,为进一步阐明Au-Cu双金属催化剂的表面反应机理提供参考。     

Investigation of Electrochemical Properties of Xanthine,Adenine and Thymine on a Glassy Carbon Electrode by Voltammetry

In this paper for investigation of electrochemical properties of nitrogenous bases by voltammetry xanthine (Xa), adenine (A) and thymine (T) with constant-current potential sweep with differentiation were used. The electrochemical behavior of Xa, A and T on the surface of a glassy carbon electrode were investigated. The conditions of registration of their joint detecting in the solution were defined. It is demonstrated that the oxidation peak currents of Xa, A and T increased linearly with their concentration in the range of 4.0 10^-8 - 1 10^-4 mol/dm³ for Xa, 3.0 10^-7 – 1.0 10^-4 mol/dm³ for A, and 1.0 10^-5 – 1.1 10^-3 mol/dm³ for T with correlation coefficients of 0.996, 0.996 and 0.999, respectively.     

New insights on the Cd UPD on Au(111)

The Cd underpotential deposition (UPD) process on Au(111) was analyzed by means of combined electrochemical measurements and in situ scanning tunneling microscopy (STM). In the underpotential range 300?ΔE (mV) ?400, 2D Cd islands are formed on the fcc regions of the Au(111)‐(√3 × 22) reconstructed surface without lifting the reconstruction. At lower underpotentials, the 2D Cd islands grow and, simultaneously, new 2D islands nucleate and coalesce with the previous ones forming a complete condensed Cd monolayer (ML). STM images and long time polarization experiments performed at ΔE = 70 mV demonstrate the formation of an Au? Cd surface alloy. At ΔE = 10 mV, the formation of the complete Cd ML is accompanied by a significant Au? Cd surface alloying and the kinetic results reveal two different solid‐state diffusion processes. The first one, with a diffusion coefficient D₁ = 4 × 10^?17 cm² s^?1, could be ascribed to the mutual diffusion of Au and Cd atoms through a highly distorted (vacancy‐rich) Au? Cd alloy layer. The second and faster diffusion process (D₂ = 7 × 10^?16 cm² s^?1) is associated with the appearance of an additional peak in the anodic stripping curves and could be attributed to the formation of another Cd_zAu_x alloy phase. Copyright © 2008 John Wiley & Sons, Ltd.