Relative stability of armchair,zigzag and reczag graphene edges on the Ru(0001) surface

The relative stability of armchair, zigzag, and the reconstructed zigzag (reczag) graphene edges was studied using density functional theory with the Perdew, Burke, and Ernzerhof (PBE) exchange correlation functional for graphene nanoribbons in vacuo and on the Ru(0001) surface. Although the reczag edge was found to be more stable in vacuo confirming previous predictions of Koskinen et al. [Phys. Rev. Lett. 101 (2008) 115502], the relative stability reverses upon adsorption on the Ru(0001) surface. The zigzag edge is more stable than the reczag edge on the surface by about 0.15 eV/Å and the armchair ribbon was found to be approximately isoenergetic with the zigzag ribbon. For all three types of edges, strong edge–Ru interactions are observed that cause the edges to buckle down. The lowered edge height may facilitate C attachments at graphene edges during graphene synthesis.     

Magnetic and charge orders in zigzag nanographene ribbons

We theoretically study the electronic states in graphene ribbons which are strongly affected by the edge states, the peculiar non-bonding molecular orbitals localized along the zigzag edges of the ribbons. New kinds of edge localized electronic states with spin and charge polarizations are found in the mean field solutions of the extended Hubbard model with onsite and nearest-neighbor Coulomb repulsions. These novel states appear due to the interplay between the edge states and the Fermi instabilities. We also examine the competition between the charge polarized state and the spin polarized state to draw a phase diagram depending on Coulomb parameters. The results obtained by the mean field calculations with the extended Hubbard model modified to include Coulomb integrals provide useful insights to understand and functionalize the nanoscale materials.     

Energy gaps in graphene nanoribbons

Based on a first-principles approach, we present scaling rules for the band gaps of graphene nanoribbons (GNRs) as a function of their widths. The GNRs considered have either armchair or zigzag shaped edges on both sides with hydrogen passivation. Both varieties of ribbons are shown to have band gaps. This differs from the results of simple tight-binding calculations or solutions of the Dirac's equation based on them. Our ab initio calculations show that the origin of energy gaps for GNRs with armchair shaped edges arises from both quantum confinement and the crucial effect of the edges. For GNRs with zigzag shaped edges, gaps appear because of a staggered sublattice potential on the hexagonal lattice due to edge magnetization. The rich gap structure for ribbons with armchair shaped edges is further obtained analytically including edge effects. These results reproduce our ab initio calculation results very well.     

羟基饱和锯齿型石墨烯纳米带的电子结构

利用密度泛函理论,计算了羟基饱和锯齿型石墨烯纳米带(OH-ZGNRs)的相对稳定性和外加横向电场对其电子结构的影响.计算结果表明:OH-ZGNRs比氢饱和ZGNRs(H-ZGNRs)更为稳定,具有窄带隙自旋极化基态.此外,在外加横向电场作用下,OH-ZGNRs可实现半导体到半金属相转变. 关键词： 石墨烯纳米带 密度泛函理论 电场     

Domain boundaries in silicene:Density functional theory calculations on electronic properties

By using density functional theory(DFT)-based first-principles calculations, the structural stability and electronic properties for two kinds of silicene domain boundaries, forming along armchair edge and zigzag edge, have been investigated. The results indicate that a linkage of tetragonal and octagonal rings(4|8) appears along the armchair edge, while a linkage of paired pentagonal and octagonal rings(5|5|8) appears along the zigzag edge. Different from graphene, the buckling properties of silicene lead to two mirror symmetrical edges of silicene line-defect. The formation energies indicate that the 5|5|8 domain boundary is more stable than the 4|8 domain boundary. Similar to graphene, the calculated electronic properties show that the 5|5|8 domain boundaries exhibit metallic properties and the 4|8 domain boundaries are half-metal.Both domain boundaries create the perfect one-dimensional(1D) metallic wires. Due to the metallic properties, these two kinds of nanowires can be used to build the silicene-based devices.     

Acoustic analog of monolayer graphene and edge states

Acoustic analog of monolayer graphene has been designed by using silicone rubber spheres of honeycomb lattices embedded in water. The dispersion of the structure has been studied theoretically using the rigorous multiple-scattering method. The energy spectra with the Dirac point have been verified and zigzag edge states have been found in ribbons of the structure, which are analogous to the electronic ones in graphene nanoribbons. The guided modes along the zigzag edge excited by a point source have been numerically demonstrated. The open cavity and “Z” type edge waveguide with 60° corners have also been realized by using such edge states.     

Structural, electronic, and magnetic properties of pristine and oxygen-adsorbed graphene nanoribbons

The structural, electronic and magnetic properties of pristine and oxygen-adsorbed (3,0) zigzag and (6,1) armchair graphene nanoribbons have been investigated theoretically, by employing the ab initio pseudopotential method within the density functional scheme. The zigzag nanoribbon is more stable with antiferromagnetically coupled edges, and is semiconducting. The armchair nanoribbon does not show any preference for magnetic ordering and is semiconducting. The oxygen molecule in its triplet state is adsorbed most stably at the edge of the zigzag nanoribbon. The Stoner metallic behaviour of the ferromagnetic nanoribbons and the Slater insulating (ground state) behaviour of the antiferromagnetic nanoribbons remain intact upon oxygen adsorption. However, the local magnetic moment of the edge carbon atom of the ferromagnetic zigzag ribbon is drastically reduced, due to the formation of a spin-paired C-O bond.     

Carbon nanoribbons and nanotubes based on δ-graphyne: A first-principles study

As a stable allotropy of two-dimensional (2D) carbon materials, δ-graphyne has been predicted to be superior to graphene in many aspects. Using first-principles calculations, we investigated the electronic properties of carbon nanoribbons (CNRs) and nanotubes (CNTs) formed by δ-graphyne. It is found that the electronic band structures of CNRs depend on the edge structure and the ribbon width. The CNRs with zigzag edges (Z-CNRs) have spin-polarized edge states with ferromagnetic (FM) ordering along each edge and anti-ferromagnetic (AFM) ordering between two edges. The CNRs with armchair edges (A-CNRs), however, are semiconductors with the band gap oscillating with the ribbon width. For the CNTs built by rolling up δ-graphyne with different chirality, the electronic properties are closely related to the chirality of the CNTs. Armchair (n, n) CNTs are metallic while zigzag (n, 0) CNTs are semiconducting or metallic. These interesting properties are quite crucial for applications in δ-graphyne-based nanoscale devices.     

Self-passivating edge reconstructions of graphene

Planar reconstruction patterns at the zigzag and armchair edges of graphene were investigated with density-functional theory. It was unexpectedly found that the zigzag edge is metastable and a planar reconstruction spontaneously takes place at room temperature. The reconstruction changes electronic structure and self-passivates the edge with respect to adsorption of atomic hydrogen from a molecular atmosphere.     

Calculations of electric capacitance in carbon and BN nanotubes, and zigzag nanographite (BN, BCN) ribbons

Electronic states in nanographite ribbons with zigzag edges are studied using the extended Hubbard model with nearest neighbor Coulomb interactions. The electronic states with the opposite electric charges separated along both edges are analogous as nanocondensers. Therefore, electric capacitance, defined using a relation of polarizability, is calculated to examine nano-functionalities. We find that the behavior of the capacitance is widely different depending on whether the system is in the magnetic or charge polarized phases. In the magnetic phase, the capacitance is dominated by the presence of the edge states while the ribbon width is small. As the ribbon becomes wider, the capacitance remains with large magnitudes as the system develops into metallic zigzag nanotubes. It is proportional to the inverse of the width, when the system corresponds to the semiconducting nanotubes and the system is in the charge polarized phase also. The latter behavior could be understood by the presence of an energy gap for charge excitations. In the BN (BCN) nanotubes and ribbons, the electronic structure is always like that of semiconductors. The calculated capacitance is inversely proportional to the distance between the positive and negative electrodes.     

基于graphene条带的硅纳米结构

采用分子动力学模拟方法研究了graphene条带上生长硅纳米结构的过程,分析了不同温度下硅原子在graphene条带边沿生成的新型纳米结构.研究表明,随机分布的硅原子吸附到锯齿型graphene条带边沿在不同的温度T下可生成不同类型的硅纳米结构：300K≤T<2000K时形成无规则的团簇,2000K≤T≤2800K时形成单原子链结构,2800K<T<3900K时形成含缺陷的硅链结构,T≥3900K时硅原子逐渐替代条带边沿的碳原子直至graphene条带破坏.而硅原子吸附到扶手椅型graphene条带边沿在300K≤T<3000 K内仅能形成非链状的不定型的硅纳米结构. 关键词： graphene 硅 纳米结构 分子动力学模拟     

Electronic and magnetic properties of copper-family-element atom adsorbed graphene nanoribbons with zigzag edges

We have investigated the electronic and magnetic properties of copper-family-element (CFE) atom adsorbed graphene nanoribbons (GNRs) with zigzag edges using first-principles calculations based on density functional theory. We found that CFE atoms energetically prefer to be adsorbed at the edges of nanoribbons. Charges are transferred between the CFE atom and carbon atoms at the edge, which reduce the local magnetic moment of carbon atoms in the vicinity of adsorption site and change the electronic structure of GNRs. As a result, Cu adsorbed zigzag GNR is a semiconductor with energy band gap of 0.88 eV in beta-spin and energy gap of 0.22 eV in alpha-spin, while Ag adsorbed zigzag GNR and Au adsorbed zigzag GNR are both half-metallic with the energy gaps of 0.68 eV and 0.63 eV in beta-spin, respectively. These results show that CFE atom adsorbed zigzag GNRs can be applied in nanoelectronics and spintronics.     

Graphene edge from armchair to zigzag: the origins of nanotube chirality?

The energy of an arbitrary graphene edge, from armchair (A) to zigzag (Z) orientation, is derived in analytical form. It contains a "chemical phase shift" determined by the chemical conditions at the edge. Direct atomistic computations support the universal nature of the relationship, definitive for graphene formation, and shapes of the voids or ribbons. It has further profound implications for nanotube chirality selection and possibly control by chemical means, at the nucleation stage.     

First principles calculations of armchair graphene nanoribbons interacting with Cu atoms

We have investigated the electronic properties of bare, H-terminated, Cu-terminated and Cu-doped armchair graphene nanoribbons (AGNRs) using ab-initio approach. We found that H-termination enhances the stability and band gap whereas H extraction introduces dangling bands and lowers the band gap making bare ribbons indirect band gap semiconductors. The calculations revealed that strong hybridization between Cu atoms and AGNRs, lessen the band gap for Cu-terminated ribbons and gives rise to metallicity in Cu-doped AGNRs irrespective of their widths. Formation energy of considered ribbons yield that H-terminated AGNRs with lowest formation energy are most energetically favored, next are one edge Cu-terminated ribbons followed by bare ones whereas both edges Cu-doped ribbons are least energetically plausible. We predict that presence of Cu atoms in GNRs, significantly alter the band gap and can be used in band gap engineering of nanoribbons.     

Comparison of Raman spectra and vibrational density of states between graphene nanoribbons with different edges

Vibrational properties of graphene nanoribbons are examined with density functional based tight-binding method and non-resonant bond polarization theory. We show that the recently discovered reconstructed zigzag edge can be identified from the emergence of high-energy vibrational mode due to strong triple bonds at the edges. This mode is visible also in the Raman spectrum. Total vibrational density of states of the reconstructed zigzag edge is observed to resemble the vibrational density of states of armchair, rather than zigzag, graphene nanoribbon. Edge-related vibrational states increase in energy which corroborates increased rigidity of the reconstructed zigzag edge.     

Localized states at zigzag edges of bilayer graphene

We report the existence of zero-energy surface states localized at zigzag edges of bilayer graphene. Working within the tight-binding approximation we derive the analytic solution for the wave functions of these peculiar surface states. It is shown that zero-energy edge states in bilayer graphene can be divided into two families: (i) states living only on a single plane, equivalent to surface states in monolayer graphene and (ii) states with a finite amplitude over the two layers, with an enhanced penetration into the bulk. The bulk and surface (edge) electronic structure of bilayer graphene nanoribbons is also studied, both in the absence and in the presence of a bias voltage between planes.     

Zigzag型石墨纳米带电子结构和输运性质的第一性原理研究

采用第一性原理电子结构和输运性质计算研究了zigzag型单层石墨纳米带(具有armchair 边缘)的电子结构和输运性质及其边缘空位缺陷效应. 研究发现，完整边缘的zigzag型石墨纳米带是具有一定能隙的半导体带，边缘空位缺陷的存在使得纳米带能隙变小，且缺陷浓度越大，能隙越小，并发生了半导体-金属转变. 利用这些研究结果，将有助于在能带工程中实现其电子结构裁剪.     

Zigzag型石墨纳米带电子结构和输运性质的第一性原理研究

采用第一性原理电子结构和输运性质计算研究了zigzag型单层石墨纳米带(具有armchair 边缘)的电子结构和输运性质及其边缘空位缺陷效应. 研究发现,完整边缘的zigzag型石墨纳米带是具有一定能隙的半导体带,边缘空位缺陷的存在使得纳米带能隙变小,且缺陷浓度越大,能隙越小,并发生了半导体-金属转变. 利用这些研究结果,将有助于在能带工程中实现其电子结构裁剪. 关键词： 石墨纳米带 空位缺陷 电子结构 输运性质     

Electronic shell and supershell structure in graphene flakes

We use a simple tight-binding (TB) model to study electronic properties of free graphene flakes. Valence electrons of triangular graphene flakes show a shell and supershell structure which follows an analytical expression derived from the solution of the wave equation for triangular cavity. However, the solution has different selection rules for triangles with armchair and zigzag edges, and roughly 40?000 atoms are needed to see clearly the first supershell oscillation. In the case of spherical flakes, the edge states of the zigzag regions dominate the shell structure which is thus sensitive to the flake diameter and center. A potential well that is made with external gates cannot have true bound states in graphene due to the zero energy band gap. However, it can cause strong resonances in the conduction band.     

Magnetic properties of nanographite with modified zigzag edges

Newly proposed aromatic molecules and graphene fragments are shown to have the high-spin ground state by the first-principles electronic structure calculations. Our strategy to predict magnetic carbon materials is based on our previous conclusion that mono-hydrogenated, di-hydrogenated or mono-fluorinated zigzag edges of honeycomb networks are magnetic. Structural optimization as well as determination of the electronic states was performed for various nanographite ribbons and high-spin molecules, e.g. 1,8,9-di-hydro-anthracene, C₁₉H₁₄ and C₁₄F₁₃. For hydrogenated molecules and ribbons, the total spin S determined by the LSDA calculation coincides with the value expected from a counting rule for the total spin on a bipartite network. However, S depends on structures of fluorinated nanographite.