Ag∶InP/ZnSe纳米晶的合成与生物成像

采用高温热注入法,以P[N(CH_3)_2]_3为磷源合成了具有近红外荧光的Ag∶InP/ZnSe纳米晶.采用紫外-可见-近红外吸收光谱(UV-Vis-NIR)、荧光光谱、透射电子显微镜(TEM)、X射线衍射(XRD)等对产物的结构和光学性质进行了表征,并分析了Ag掺杂浓度和温度对InP纳米晶荧光性能的影响.通过调节Ag掺杂浓度和反应温度,发现当Ag掺杂量为6%,反应温度为200℃时,Ag∶InP纳米晶的发光效率最高.将制备的Ag∶InP的表面包覆ZnSe,粒子的荧光效率从原来的20%提高到45%.将具有近红外荧光的Ag∶InP/ZnSe纳米晶应用于细胞成像,结果表明制备的荧光纳米晶在细胞成像中清晰可见且毒性较低.     

Ag∶InP/ZnSe纳米晶的合成与生物成像

采用高温热注入法, 以P[N(CH3)2]3为磷源合成了具有近红外荧光的Ag∶InP/ZnSe纳米晶. 采用紫外|可见|近红外吸收光谱(UV|Vis|NIR)、 荧光光谱、 透射电子显微镜(TEM)、 X 射线衍射(XRD)等对产物的结构和光学性质进行了表征, 并分析了Ag掺杂浓度和温度对InP纳米晶荧光性能的影响. 通过调节Ag掺杂浓度和反应温度, 发现当Ag掺杂量为6%, 反应温度为200 ℃时, Ag∶InP纳米晶的发光效率最高. 将制备的Ag∶InP的表面包覆ZnSe, 粒子的荧光效率从原来的20%提高到45%. 将具有近红外荧光的Ag∶InP/ZnSe纳米晶应用于细胞成像, 结果表明制备的荧光纳米晶在细胞成像中清晰可见且毒性较低.     

利用离子型Cd源制备ZnSe/CdSe核-壳结构纳米晶

在有机相体系中利用ZnSe前驱体纳米晶制备过程中的富Se环境,以引入Cd2+的方式在相对温和的环境下通过控制Cd2+离子的加入量及调节反应时间,成功制备了ZnSe/CdSe核-壳复合结构纳米晶.利用X射线衍射(XRD)、透射电镜(TEM)、紫外-可见吸收光谱(UV-vis)和荧光光谱(FL)对其结构形貌以及光学性质进行表征和分析的结果表明,CdSe以外延生长的方式包覆在ZnSe纳米晶表面从而形成具有良好结晶性的核-壳复合结构,其荧光发射始终保持良好单色性,同时实现了在500～620nm可见光范围内的连续可调.     

无膦方法合成高质量CdSe纳米晶及其光学性质

以合成的十碳酸镉作为Cd前驱体, 十八烯作为单质硒溶剂, 并添加十八胺作为活性剂, 在无三丁基膦或三辛基膦参与的条件下, 以较低温度制备了具有闪锌矿结构的高质量的CdSe纳米晶. 利用吸收光谱、荧光光谱(PL)、X射线衍射(XRD)、透射电镜(TEM)对不同反应时间得到的CdSe纳米晶进行形貌和光谱性质表征. 实验结果表明, 采用该无膦法只需调控反应时间就可得到粒径均一、分散性好的CdSe纳米晶, 其荧光波长可覆盖470-630 nm的可见光区, 而荧光峰半高宽则始终保持在24-30 nm之间并具有较高的荧光量子产率(535 nm处大于60%). 最后, 对CdSe纳米晶量子产率随反应时间变化的原因进行了分析.     

闪锌矿结构CdS纳米晶的制备

以3-巯基丙酸为硫源, 采用水热法制备了尺寸小于10 nm、具有强光致荧光的闪锌矿型立方CdS半导体纳米晶. 用EDS能谱、透射电镜(TEM)、高分辨透射电镜(HRTEM)和XRD对晶体的化学成分、大小及结构进行了表征, 并分析了影响纳米晶尺寸的因素, 研究了闪锌矿型硫化镉纳米晶的荧光激发与发射谱.     

4-(4-甲氧基苯亚甲基)-2-苯基-5(4H)-噁唑酮纳米带的可控制备及光学特性研究

选取大π共轭体系4-(4-甲氧基苯亚甲基)-2-苯基-5(4H)-噁唑酮作为研究对象,采用再沉淀法制备其纳米晶体,通过研究溶剂、温度、搅拌速度、搅拌时间等因素对所形成的纳米粒子的形貌尺寸的影响,成功制备出了形貌较单一的纳米棒和纳米带结构并进一步考察了它们的紫外吸收和发射光谱,结果表明随着纳米粒子尺寸的增加,其吸收光谱和荧光光谱均出现红移,荧光量子效率随着粒子尺寸的增大略有增大.     

CdSe纳米晶/共轭聚合物太阳电池的制备与性能研究

采用有机金属液相法制备了平均粒径为5 nm的CdSe纳米微球(ns-CdSe), 并将其与共轭聚合物(MEH-PPV或P3HT)共混制备了太阳电池器件. 透射电镜(TEM)、紫外-可见吸收光谱(UV-Vis)及荧光光谱(PL)研究结果表明, CdSe纳米晶呈均匀的球状颗粒, 在近红外区具有良好的吸收和荧光性能; 加入CdSe纳米晶能够有效地淬灭共轭聚合物的荧光. 在AM1.5模拟太阳光(光强为100 mW/cm2)照射下, ns-CdSe/MEH-PPV共混体系太阳电池器件性能测试结果为: 短路电流ISC为1.56 mA/cm2, 开路电压VOC为0.75 V, 填充因子FF为34.5％, 光电转换效率η为0.40%; 对于ns-CdSe/P3HT共混体系, 其ISC为1.93 mA/cm2, VOC为0.65 V, FF为38.4%, η为0.48%.     

硅量子点支撑钯纳米粒子的可控制备

采用微乳法制备烯丙胺修饰的硅量子点(Si QDs),通过紫外-可见吸收光谱、荧光光谱和红外光谱对其光学性能进行了表征,通过透射电镜(TEM)对其形貌进行了表征,测得其荧光量子产率为10.06%,荧光寿命τ1=3.1982ns,τ2=12.4527ns。依据Si QDs的光学性质,制备了Si QDs支撑Pd纳米粒子材料(Si QDs/Pd)。通过量子点的浓度实现了Pd纳米粒子形貌和尺寸的有效控制。结果表明制备的Pd纳米材料具有较好的分散性,在有机催化和能源转化领域具有潜在的应用价值。     

CsPbX3(X=Cl,Br,I)纳米晶的制备及其应用

全无机钙钛矿CsPbX₃(X = Cl, Br, I) 纳米晶作为一类新型的低成本直接带隙半导体材料,具有优异的光学性质,如吸收系数高、尺寸和发射波长易调节、半峰宽窄、荧光量子产率高等特性,在照明、能源、信息显示和探测等领域表现出巨大的应用潜力,成为材料领域的研究热点。本文从CsPbX₃纳米晶的结构组成入手,重点综述了其常见的制备方法如高温热注入法、室温再沉淀法、溶剂热法、液滴微流控法、阴离子交换法等,对常见的形貌尺寸控制策略如反应温度和表面配体进行归纳,以及改善CsPbX₃纳米晶稳定性的策略,总结了此类材料在白色发光二极管、电致发光二极管、激光器、光电探测器、太阳能电池等光电领域的应用情况,最后对CsPbX₃纳米晶领域存在的问题和面临的挑战进行了分析和评述。     

基于纳米晶晶格热胀冷缩的高灵敏度荧光纳米温度计

有效测量纳微米尺度范围温度及物体表面温度梯度分布需要研发各种类型的纳米尺度温度计来实现.半导体纳米晶由于具有尺寸效应引起光致发光(荧光)效应,其具有的热胀冷缩的性质会使得温度变化引起纳米晶晶格收缩或膨胀,从而引起荧光光谱的变化,进而为设计制备高灵敏度温度计奠定基础.结合前期相关工作,本文总结了基于纳米晶的各种荧光纳米温度计,阐述不同类型纳米温度计的特性,为这一前沿领域研究提供启发.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.