甲酸在Pt-Ru/GC电极上氧化的SERS研究

采用循环伏安(CV)法、计时电流法和电化学原位表面增强拉曼散射光谱(SERS)技术研究了甲酸在Pt-Ru/GC电极上的氧化行为, 发现甲酸在Pt-Ru/GC电极上与在粗糙Pt电极上一样, 也能自发解离出强吸附中间体CO和活性中间体—COO－. 从分子水平证实钌的加入有利于提高电极对甲酸的电催化氧化活性, 当镀液中Pt：Ru的摩尔比从10∶1变化到1∶1, CO的氧化峰电位从0.41 V负移至0.35 V, 约负移了60 mV. Pt-Ru/GC(1∶1)电极与粗糙Pt电极相比, CO在电极表面氧化完毕的电位亦负移了约200 mV. 该研究结果表明, 电化学原位表面增强拉曼散射光谱技术可望成为研究电催化反应机理的普适谱学工具.     

碳纳米管/纳米二氧化钛-聚苯胺载铂复合电极对葡萄糖的电催化氧化

采用循环伏安(CV)、微分脉冲伏安(DPV)和计时电位法研究了碳纳米管/纳米TiO2-聚苯胺膜载Pt(CNT/nanoTiO2-PAn-Pt)复合电极对葡萄糖的电催化氧化作用。结果表明,在碱性介质中CNT/nanoTiO2-PAn-Pt复合电极对葡萄糖的电氧化具有高催化活性。当葡萄糖浓度为1.25×10-2mol/L时,氧化峰电流密度达到32.8 mA/cm2,且有很高的灵敏度和稳定性;当葡萄糖浓度为1.0×10-5mol/L时,其响应电流密度为13.8mA/cm2。大电流氧化时未发生振荡现象,是葡萄糖传感器的高活性催化电极。     

Pd/TiC-C催化剂对甲酸氧化的电催化性能

研究了TiC和C作混合载体的Pd(Pd/TiC-C)催化剂对甲酸氧化的电催化性能。发现Pd/TiC-C催化剂对直接甲酸燃料电池(DFAFC)中甲酸氧化的电催化性能要优于Pd/C催化剂。而且,Pd/TiC-C催化剂的电催化性能与C和TiC的质量比有关,当质量比为2时,Pd/TiC-C催化剂对甲酸氧化的电催化活性和稳定性最好,甲酸在C和TiC的质量比为2的Pd/TiC-C催化剂电极上的氧化峰峰电位为0.164 V,比在Pd/C催化剂电极上负移12 mV,峰电流密度为23.08 mA/cm2,比在Pd/C催化剂电极上高约42％。     

Pt(110)/Sb电极上甲酸的电催化氧化特征和动力学

研究了Sb在Pt(110)晶面上不可逆吸附电化学特性及甲酸在Sb_ad修饰Pt(110)电极[Pt(110)/Sb]上的电催化氧化特征及其反应动力学.发现当扫描电位的上限E_u≤0.45V时,Sb_ad可稳定地吸附在Pt(110)表面上,从而有效地抑制了甲酸的解离吸附.与未修饰的Pt(110)上的结果相比,在Pt(110)/Sb上甲酸氧化的峰电位负移了0.35V.当θ_Sb=0.126时,Pt(110)/Sb电极对甲酸的电催化活性最高.还研究了Pt(110)/Sb上甲酸氧化反应的动力学,定量解析了不同θ_Sb下甲酸氧化的速度常数kf和传递系数β.     

Ag/Au/Pt复合催化剂的制备及其对甲酸的电催化氧化

利用化学-电化学方法制备了Ag/Au/Pt复合催化剂. 该催化剂以100 nm左右的Ag颗粒为基底, 以化学方法沉积金再电沉积铂, 这降低了贵金属Au和Pt的用量. 通过SEM, EDX和XRD对样品进行表征, 并测试对甲酸的电催化氧化性能. 研究表明, 当Pt∶Au原子数比小于1∶10时, 主要表现为直接氧化, 在较低的Pt负载量(0.71 μg/cm²)情况下, Ag/Au/Pt复合催化剂对甲酸氧化的直接氧化峰电流密度达到最大. 甲酸的电催化氧化稳定性实验表明, 当Pt载量为0.05 μg时, 相对于最大峰电流密度, 循环伏安扫描第100圈时甲酸氧化的直接氧化峰电流密度仅衰减了2.29%. 同时CO氧化剥离实验表明, 当Pt∶Au＝1∶6时, Ag/Au/Pt复合催化剂对CO氧化峰电势最负, 相对于纯Pt催化剂负移了大约0.13 V, 表明该复合催化剂具有更好的抗CO毒化能力.     

抗坏血酸在PPy-HEImTfa/Pt电极上的电催化氧化及其机理

以铂为基底电极,在1-乙基咪唑三氟乙酸盐(HEImTfa)离子液体中电化学合成导电聚吡咯(PPy),制得PPy-HEImTfa/Pt电极;采用循环伏安法研究了PPy-HEImTfa/Pt电极对抗坏血酸的电催化氧化性能.结果表明:PPy-HEImTfa/Pt电极对0.1mo·lL-1抗坏血酸具有较高的电催化氧化活性,与相同条件下硫酸溶液中在铂表面修饰的聚吡咯(PPy-H2SO4/Pt)电极和裸铂电极相比,其氧化峰电位分别降低了0.10和0.19V,氧化峰电流分别增加了3.0和3.6mA.同时采用原位傅里叶变换红外(insitu FTIR)光谱技术对抗坏血酸在PPy-HEImTfa/Pt电极上的电氧化机理进行了研究,结果表明:抗坏血酸在PPy-HEImTfa/Pt电极上首先被氧化为脱氢抗坏血酸,在水溶液中脱氢抗坏血酸迅速发生水合作用形成水合脱氢抗坏血酸,它进一步水解并发生内酯开环反应生成2,3-二酮古洛糖酸;在较高电位下,部分抗坏血酸最终被氧化成CO2.     

甲酸在Aucore@Ptshell/Pt电极上电催化氧化的原位SERS

用化学还原法合成了Aucore@Ptshell纳米粒子, 并用扫描电子显微镜(SEM)及X射线衍射(XRD)等技术对纳米粒子进行表征; 采用电化学原位表面增强拉曼光谱(SERS)技术对甲酸的电催化氧化过程进行了研究, 成功地获得了甲酸在Aucore@Ptshell/Pt电极上解离吸附的原位SERS. 结果显示, 在开路电位时, 甲酸能在Aucore@Ptshell/Pt电极表面自发氧化, 解离生成强吸附中间体COad和弱吸附中间体HCOOad, 在电位为+0.10 V时检测到氧化产物CO2的谱峰. 研究结果表明, Aucore@Ptshell/Pt电极对甲酸的氧化具有较高的催化活性和较强的SERS效应, 甲酸在Aucore@Ptshell/Pt电极上的电催化氧化过程遵循双途径机理.     

Pt/C催化剂对甲酸电催化氧化的粒径效应

在甲醇溶剂中,利用SnCl2作为还原剂,通过控制反应条件制备了具有不同粒径Pt粒子的炭载Pt(Pt/C)催化剂.X射线衍射(XRD)和透射电子显微镜(TEM)的结果表明,Pt/C催化剂中Pt粒子具有高度的均一性和良好的分散度.电化学研究结果显示,对于甲酸的电催化氧化,Pt/C催化剂存在着明显的粒径效应.当Pt粒子粒径为3.2 nm时,Pt/C催化剂对甲酸的电催化氧化活性最佳.Pt/C催化剂对甲酸氧化的粒径效应与其表面含氧基团含量、Pt粒子的比表面积及相对结晶度相关.     

镍铁水滑石/还原氧化石墨烯的制备及电催化水氧化性能

首先制备了不同镍/铁比的镍铁水滑石, 并通过液相剥离法得到水滑石纳米薄片溶胶, 随后将其与还原氧化石墨烯复合, 并对其进行了电催化水氧化的性能测试. 结果表明, 镍铁水滑石的剥离可以大幅度提高其电催化性能, 起峰电位为1.47 V, 电流密度为10 mA/cm² 时, 电位仅为1.53 V; 与还原氧化石墨烯复合后, 其催化活性得到了进一步提高, 在10 mA/cm²时电位降为 1.515 V.     

直接甲酸燃料电池炭载Pd阳极催化剂的稳定性

用X射线衍射和电化学方法研究了在甲酸溶液中浸泡一段时间后的Pd/C催化剂的结构和电催化性能, 发现在甲酸溶液中浸泡15 d后, Pd/C催化剂中Pd粒子的相对结晶度由1.73增加到3.34, 平均粒径由4.4 nm降低到1.8 nm, 对甲酸氧化的电催化活性和稳定性降低, 甲酸氧化的峰电流密度由9.3 mA/cm2降低到6.7 mA/cm2. 这可能是由Pd/C催化剂中的Pd在甲酸中会有一定的溶解和Pd/C催化剂能催化分解甲酸引起的.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.