Schiff base‐functionalized boehmite nanoparticle‐supported molybdenum and vanadium complexes: efficient catalysts for the epoxidation of alkenes

Boehmite nanoparticles, with high surface area and high degree of surface hydroxyl groups, were prepared via hydrothermal‐assisted sol–gel processing of aluminium 2‐butoxide. The produced powder was covalently functionalized with 3‐(trimethoxysilyl)propylamine, and then, in order to support vanadium oxosulfate and molybdenum hexacarbonyl complexes, all the terminal amine groups were changed to Schiff bases by refluxing with salicylaldehyde. These catalysts were applied in the epoxidation of cis‐cyclooctene and other olefins with tert‐BuOOH in CCl₄. The catalytic procedures for both catalysts were optimized for various parameters such as solvent and oxidant. Recycling experiments revealed that these heterogeneous nano‐catalysts could be repeatedly applied for the epoxidation of alkenes. Copyright © 2015 John Wiley & Sons, Ltd.     

Post modification of zinc based coordination polymer to prepare Zn‐Mo‐ICP nanoparticles as efficient self‐supported catalyst for olefin epoxidation

Preparation, characterization, and catalytic properties of bimetallic coordination polymer constructed from 2‐aminoterephthalic acid as linker, zinc cations as node, and cis‐dioxo molybdenum units as catalytic active sites are reported via two pathways. Molybdenum centers were placed in N,O positions created by condensation reaction of 2‐aminoterephthalic acid with salicylaldehyde while zinc cations coordinated via carboxylic acid groups of linker to achieve infinite chains of metalo‐ligand. The obtained coordination polymer was fully characterized and its catalytic properties in the epoxidation of olefins with tert‐butyl hydroperoxide (TBHP) described. In comparison with previously reported heterogenized molybdenum catalysts, this new coordination polymer exhibited good conversion as well as high selectivity in the epoxidation of olefins. The catalyst is stable under ambient conditions and could be reused as active catalyst for at least five times.     

Asymmetric epoxidation of unfunctionalized olefins catalyzed by chiral salen‐Mn (III) immobilized on alkoxyl‐modified ZnPS‐PVPA

Novel layered heterogeneous chiral salen Mn (III) catalysts anchored onto ZnPS‐PVPA by means of click chemistry are synthesized and employed in asymmetric epoxidations of unfunctionalized olefins. The catalysts manifest superior catalytic performances (conv%, up to >99; ee%, up to >99) according to the epoxidations of α‐methylstyrene, styrene, indene and 1‐octene. But for 6‐cyano‐ 2,2‐dimethylchromene and 6‐nitro‐2,2‐dimethylchromene, configuration of epoxides are reversed. Moreover, the catalysts could still indicate comparable properties (yield, 82%; ee, 86%) after recycling for nine times and excellent functions in large‐scale reactions, which paves the way for the application in industry.     

An effective approach for the immobilization of chiral Mn(III) salen complexes through a supported ionic liquid phase

An effective method based on supported ionic liquid system was employed to immobilize chiral Mn(III) salen complexes. The prepared heterogeneous catalysts exhibited excellent activity and enantioselectivity in the asymmetric epoxidation of unfunctionalized olefins. Especially, in the epoxidation of α-methylstyrene, both the conversion and ee value could exceed 99%. Furthermore, the immobilized catalysts were stable and could be recycled three times without loss of activities.     

磺甲基化ZPS-IPPA轴向固载手性Salen Mn(Ⅲ)催化剂及催化烯烃环氧化反应

以聚(苯乙烯-异丙烯膦酸)-磷酸氢锆(ZPS-IPPA)为载体,对其苯环氯甲基化、磺酸化后与手性Salen Mn(Ⅲ)轴向配位,合成了一类新的固载型手性Salen Mn(Ⅲ)催化剂,采用FTIR,XPS,SEM,TEM,N2吸附等对催化剂表征.分别在次氯酸钠溶液和间氯过氧苯甲酸氧化体系中,考察了固载催化剂对苯乙烯、α-甲基苯乙烯、茚等非功能化烯烃不对称环氧化反应的催化性能,结果表明,与均相催化剂相比,对映体选择性明显提高.尤其在m-CPBA/NMO氧化体系中0℃反应12h,茚的环氧化物的转化率及ee值均达到99%以上.并且催化剂容易分离,回收使用5次仍能保持较好的催化性能.     

Catalytic Performance of Ruthenium‐Supported Ionic‐Liquid Catalysts in Sustainable Synthesis of Macrocyclic Lactones

Thirteen‐ to eighteen‐membered lactones were synthesized by ring‐closing olefin‐metathesis reactions of bis‐olefins with heterogeneous Grubbs‐supported ionic‐liquid catalysts (SILCs), in which homogeneous Grubbs catalysts were confined in pores of alumina with the aid of an ionic liquid. The Grubbs‐SILCs exhibited higher catalytic performance than their homogeneous counterparts and could be repeatedly recovered by simple filtration and re‐used several times.     

Efficient Noble‐Metal‐Free Catalysts Supported by Three‐Dimensional Ordered Hierarchical Porous Carbon

Development of heterogeneous catalysts has attracted increasing attention, owing to their remarkable catalytic performance and recyclability. Herein, we report well‐developed heterogeneous catalysts with a three‐dimensional ordered hierarchical structure, constructed from nickel or cobalt nanoparticles embedded in porous carbon. The obtained catalysts were fully characterized by several techniques. On account of the uniform distribution of metal nanoparticles in the porous carbon matrix and large diffusion channels that allow for effective mass transport, the catalysts exhibited superior catalytic performance for styrene epoxidation reaction. In particular, the catalysts showed good catalytic activity, high selectivity and excellent recyclability toward the styrene epoxidation. Thus, this facile approach developed allows for fabricating advanced heterogeneous catalysts with high catalytic activities for useful practical applications.     

Development of a General and Efficient Iron‐Catalyzed Epoxidation with Hydrogen Peroxide as Oxidant

The development of inexpensive and practical iron catalysts for the environmentally benign epoxidation of olefins with hydrogen peroxide as terminal oxidant is described. By systematic variation of ligands, metal sources, and reaction conditions, it was discovered that FeCl₃?6H₂O in combination with pyridine‐2,6‐dicarboxylic acid and different amines shows high reactivity and excellent selectivity towards the epoxidation of aromatic olefins and moderate reactivity towards that of aliphatic olefins.     

Preparation and characterization of Fe3O4@Boehmite core‐shell nanoparticles to support molybdenum or vanadium complexes for catalytic epoxidation of alkenes

Fe₃O₄ core nanoparticles were prepared via a solvothermal process, and then they were covered with a surface hydroxyl‐rich boehmite shell via the hydrothermal‐assisted sol–gel processing of aluminum 2‐propoxide. The outer surface of the boehmite shell was subsequently covalently functionalized with 3‐(tri‐methoxysilyl)‐propylamine or 3‐(tri‐methoxysilyl)‐propyl chloride, and the terminal chlorine groups were treated with imidazole. These compounds were used to support the hexa‐carbonyl molybdenum and oxo‐sulfato vanadium (IV) complexes. The supported catalysts were characterized by the FT‐IR, CHN, ICP, and TEM analysis techniques. They were then used in the epoxidation of cis‐cyclooctene. The catalytic procedures were optimized for different parameters such as the solvent, oxidant, and temperature. The reaction progress was investigated by the gas–liquid chromatography analysis. The catalysts used were simply recovered from the solution by applying a magnet, and recycling the experiments revealed that the heterogeneous nanocatalysts could be repeatedly used for the epoxidation of cis‐cyclooctene. The optimized conditions were also successfully used for the epoxidation of some other alkenes.     

Synthesis and catalytic activity of binuclear Mn(III,III)–BINOL complexes for epoxidation of olefins

The novel binuclear complexes [Mn₂^{(III, III)}(BINOL)₃L₂]2H₂O, where, L = 2, 2′‐bipyridine (Bpy) or 1,10‐phenanthroline (Phen) and BINOL = 1, 1′‐bi‐2‐naphthol were synthesized and characterized by elemental analyses, magnetic susceptibility and various spectral methods. The catalytic activity of these complexes was studied for the epoxidation reaction of unfunctionalized olefins like styrene, 1‐hexene, 1‐octene and 1‐decene. The products thus obtained were analyzed by GC. The epoxidation reactions were carried out, in the presence of catalyst with different oxidants, to study the effect of the nature of the oxidant on the reactions. The different oxidants used were the peroxide oxygen donor (e.g. TBHP and H₂O₂), mono oxygen donor (e.g. PhIO) and dioxygen donor (e.g. molecular O₂). TBHP was found to be the best oxidant for the epoxidation reaction. To study the effect of the solvent on the epoxidation, the reactions were carried out in different media, such as a polar media (e.g. with CH₃OH as solvent), non‐polar media (e.g. with CH₂Cl₂ and C₆H₆ as solvents) and coordinating solvent (e.g. CH₃CN). The maximum epoxide formation was observed in CH₂Cl₂ medium. The epoxidation reactions with optically active BINOL catalysts under optimum established conditions were carried out to examine the enantioselectivity of the catalysts. The complexes were, however, found not to be enantioselective. Copyright © 2006 John Wiley & Sons, Ltd.     

新型晶态层状载体聚(苯乙烯-苯乙烯基膦酸)-磷酸锌轴向固载手性Salen Mn(Ⅲ)的合成及催化烯烃的环氧化性能

在温和条件合成了新型晶态层状有机聚合物-无机杂化载体材料聚(苯乙烯-苯乙烯基膦酸)-磷酸锌, 结合实验数据提出了其可能的理想结构模型. 对该载体进行氯甲基化和酚羟基化修饰后, 轴向配位固载手性Salen Mn(Ⅲ), 合成了一类新型的多相催化剂. 以间氯过氧苯甲酸为氧源, 考察了其对α-甲基苯乙烯及茚不对称环氧化反应的催化性能. 结果表明, 这类固载催化剂具有与均相Jacobsen催化剂相当或更高的催化活性和对映选择性, 并具有优良的重复使用性. 特别是在该氧化体系中, 当无助催化剂N-甲基吗啉氮氧化物(NMO)参与时, 固载催化剂获得更高的转化率及e.e.值, 这为其扩大化生产增加了可能性.     

Multicenter nature of titanium‐based Ziegler–Natta catalysts: Comparison of ethylene and propylene polymerization reactions

This article discusses the similarities and differences between active centers in propylene and ethylene polymerization reactions over the same Ti‐based catalysts. These correlations were examined by comparing the polymerization kinetics of both monomers over two different Ti‐based catalyst systems, δ‐TiCl₃‐AlEt₃ and TiCl₄/DBP/MgCl₂‐AlEt₃/PhSi(OEt)₃, by comparing the molecular weight distributions of respective polymers, in consecutive ethylene/propylene and propylene/ethylene homopolymerization reactions, and by examining the IR spectra of “impact‐resistant” polypropylene (a mixture of isotactic polypropylene and an ethylene/propylene copolymer). The results of these experiments indicated that Ti‐based catalysts contain two families of active centers. The centers of the first family, which are relatively unstable kinetically, are capable of polymerizing and copolymerizing all olefins. This family includes from four to six populations of centers that differ in their stereospecificity, average molecular weights of polymer molecules they produce, and in the values of reactivity ratios in olefin copolymerization reactions. The centers of the second family (two populations of centers) efficiently polymerize only ethylene. They do not homopolymerize α‐olefins and, if used in ethylene/α‐olefin copolymerization reactions, incorporate α‐olefin molecules very poorly. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1745–1758, 2003     

Bipyridine‐Modulated Palladium‐Catalyzed Oxidative Heck‐Type Reactions of Arylboronic Acids with Olefins

We have demonstrated that 4,4′‐dimethyl 2,2′‐bipyridine as ligand for Pd(II) catalysts was very efficient for oxidative Heck‐type coupling reaction of arylboronic acids with olefins in DMA or CH₃CN under atm air at 80 °C. The presence of chelated bipyridine ligand isindispensable to achieve high reaction yields and to suppress the formation of biphenyl as homocoupled byproduct.     

Heterogenized peroxopolyoxotungstate catalyst on the surface of clicked magnetite‐graphene oxide nanocomposite: Magnetically recoverable epoxidation catalyst

A new heterogeneous catalyst for the epoxidation of olefins was prepared by immobilization of peroxophosphotungstate anions on the surface of clicked magnetite‐graphene oxide as magnetically recoverable support. To prepare the heterogeneous catalyst, the clicked magnetite‐graphene oxide support was prepared by thiolene click reaction of thiol functionalized graphene oxide with vinyl modified magnetite nanoparticles. The tailored support was then modified with aminopropyl groups followed by electrostatic interaction with peroxophosphotungstate anions to achieve the desired heterogeneous catalyst. Characterization of the catalyst was performed by various physicochemical methods which confirmed the successful immobilization of peroxopolyoxotungstate species on the surface of clicked magnetite‐graphene oxide. Catalytic activity of the catalyst revealed its high catalytic activity and selectivity in the epoxidation of various olefins in the presence of H₂O₂ as green oxidant. This heterogeneous catalyst can be magnetically reused several times without significant loss of activity and selectivity.     

Oxidation of alkenes catalysed by molybdenum(VI)–oxodiperoxo complex anchored on the surface of magnetic nanoparticles under solvent‐free conditions

A new epoxidation catalyst has been prepared by grafting a molybdenum(VI)–oxodiperoxo complex containing an oxazine ligand, [MoO(O₂)₂(phox)], on chloro‐functionalized Fe₃O₄ nanoparticles. The synthesized heterogeneous catalyst (MoO(O₂)₂(phox)/Fe₃O₄ was characterized using powder X‐ray diffraction, scanning and transmission electron microscopies, vibrating sample magnetometry, energy‐dispersive X‐ray analysis, Fourier transform infrared spectroscopy and inductively coupled plasma atomic emission spectroscopy. The immobilized complex gave high product yields and high selectivity for epoxide compared to the corresponding homogeneous one in the epoxidation of various olefins in the presence of tert ‐butyl hydroperoxide at 95°C without any co‐solvent. Also, the heterogeneous catalyst can be recycled without a noticeable change in activity and selectivity.     

MCM‐41 Immobilized Acidic Functional Ionic Liquid and Chromium(III) Complexes Catalyzed Conversion of Hexose into 5‐Hydroxymethylfurfural

The development of novel methods to obtain biofuels and chemicals from biomass has been an immediate issue in both academic and industrial communities. In this work, a series of novel catalysts were prepared and characterized by FT‐IR , TGA , XRD , SEM , TEM , ICP‐AES , NH₃‐TPD and BET , which were applied for the conversion of hexose to 5‐hydroxymethylfurfural (HMF ). The Cr(Salten)‐MCM ‐41‐[(CH₂ )₃SO₃HVIm ]HSO₄ catalyst was the most active catalyst, and a glucose conversion of 99.8% with 50.2% HMF yield was obtained at 140 °C for 4 h in dimethyl sulfoxide (DMSO ). The effects of reaction temperature, reaction time, solvents and catalyst dosages were investigated in detail. MCM ‐41 immobilized acidic functional ionic liquid and chromium(III ) Schiff base complexes as heterogeneous catalysts can be easily recovered by simple filter treatment, exhibiting excellent stability and activity towards hexose conversion. Thus the heterogeneous catalysts were environment‐friendly for transforming biomass carbohydrates into fine chemicals.     

Epoxidation of cyclohexene with H2O2 over efficient water‐tolerant heterogeneous catalysts composed of mono‐substituted phosphotungstic acid on co‐functionalized SBA‐15

A series of Keggin‐type heteropolyacid‐based heterogeneous catalysts (Co‐/Fe‐/Cu‐POM‐octyl‐NH₃‐SBA‐15) were synthesized via immobilized transition metal mono‐ substituted phosphotungstic acids (Co‐/Fe‐/Cu‐POM) on octyl‐amino‐co‐functionalized mesoporous silica SBA‐15 (octyl‐NH₂‐SBA‐15). Characterization results indicated that Co‐/Fe‐/Cu‐POM units were highly dispersed in mesochannels of SBA‐15, and both types of Brønsted and Lewis acid sites existed in Co‐/Fe‐/Cu‐POM‐octyl‐NH₃‐SBA‐15 catalysts. Co‐POM‐octyl‐NH₃‐SBA‐15 catalyst showed excellent catalytic performance in H₂O₂‐mediated cyclohexene epoxidation with 83.8% of cyclohexene conversion, 92.8% of cyclohexene oxide selectivity, and 98/2 of epoxidation/allylic oxidation selectivity. The order of catalytic activity was Co‐POM‐octyl‐NH₃‐SBA‐15 > Fe‐POM‐octyl‐NH₃‐SBA‐15 > Cu‐POM‐octyl‐NH₃‐SBA‐15. In order to obtain insights into the role of ‐octyl moieties during catalysis, an octyl‐free catalyst (Co‐POM‐NH₃‐SBA‐15) was also synthesized. In comparison with Co‐POM‐NH₃‐SBA‐15, Co‐POM‐octyl‐NH₃‐SBA‐15 showed enhanced catalytic properties (viz. activity and selectivity) in cyclohexene epoxidation. Strong chemical bonding between ‐NH₃⁺ anchored on the surface of SBA‐15 and heteropolyanions resulted in excellent stability of Co‐POM‐octyl‐NH₃‐SBA‐15 catalyst, and it could be reused six times without considerable loss of activity.     

Template‐free anion‐controlled synthesis of Pd (II) nano‐aggregates for the antifouling polymerization of CO and ethylene

The reaction of [(domppp) Pd (OAc)₂] [domppp = 1,3‐bis (di‐o‐methoxyphenylphosphino)propane] and imidazolium‐functionalized carboxylic acids containing various anions (Br^?, PF₆^?, SbF₆^? and BF₄^?) resulted in the formation of nano‐sized Pd (II) aggregates under template‐free conditions. The rate of formation of aggregates can be modulated by changing the anion, affecting the rate of polymerization of CO and olefins without fouling. Herein, we describe the analysis of Pd (II) catalysts by dynamic light scattering, atomic force microscopy, X‐ray photoelectron spectroscopy and X‐ray crystallography, and co‐ and terpolymerization results including the catalytic activity, and bulk density and molecular weight of polymers.     

可调苯氧基修饰的聚(苯乙烯-苯乙烯基膦酸)-磷酸氢锆固载手性MnⅢ(Salen)高效催化烯烃环氧化

使用不同空间位阻的苯氧链接手臂修饰的聚（苯乙烯基-苯乙烯膦酸）-磷酸氢锆轴向固载手性Mn^Ⅲ（Salen）催化剂（Cat₁-Cat₃）,随后在间氯过氧苯甲酸（m-CPBA）为氧化剂的体系中考察了固载催化剂的催化性能. 同时,在相同氧化体系下测试了一系列均相催化剂类似物（Cat₄-Cat₆）. 结果表明,在非均相条件下,可调变苯氧链接手臂的邻位取代基对催化剂活性起着重要作用,环氧化产物的对映选择性随着取代基位阻的增加而增大,但产物转化率有一定程度下降. 此外,非均相催化剂即使在没有轴向助剂的参与下（通常需要添加,为了增大催化活性）仍然表现出非常高的催化活性,尤其对α-甲基苯乙烯反应,其对映选择性从6.8%增加到76.8%,转化率从19.8%上升到90.7%. 制备的非均相催化剂11次的循环使用实验表明,在前5次使用后催化剂活性与对映选择性没有明显变化.     

Polymerization of (E)‐1,3‐Pentadiene and (E)‐2‐methyl‐1,3‐pentadiene with neodymium catalysts: Examination of the factors that affect the stereoselectivity

(E)‐1,3‐Pentadiene (EP) and (E)‐2‐methyl‐1,3‐pentadiene (2MP) were polymerized to cis‐1,4 polymers with homogeneous and heterogeneous neodymium catalysts to examine the influence of the physical state of the catalyst on the polymerization stereoselectivity. Data on the polymerization of (E)‐1,3‐hexadiene (EH) are also reported. EP and EH gave cis‐1,4 isotactic polymers both with the homogeneous and with the heterogeneous system, whereas 2MP gave an isotactic cis‐1,4 polymer with the heterogeneous catalyst and a syndiotactic cis‐1,4 polymer, never reported earlier, with the homogeneous one. For comparison, the results obtained with the soluble CpTiCl₃‐based catalyst (Cp = cyclopentadienyl), which gives cis‐1,4 isotactic poly(2MP), are examined. A tentative interpretation is given for the mechanism of the formation of the stereoregular polymers obtained and a complete NMR characterization of the cis‐1,4‐syndiotactic poly(2MP) is reported. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3227–3232