Carbon K-shell excitation of C2H2, C2H4, C2H6 and C6H6 by 2.5 keV electron impact

Energy loss spectra of 2.5 keV electrons in the region of the carbon K-edge in C₂H₂, C₂H₄, C₂H₆ and C₆H₆ are report     

Rotational and hyperfine spectra for a sandwich titanium complex, C5H5TiC7H7

Microwave spectroscopy measurements and density functional theory calculations are reported for the cyclopentadienyl cycloheptatrienyl titanium complex, C₅H₅TiC₇H₇. Rotational transition frequencies for this symmetric-top complex were measured in the 4-13 GHz range using a Flygare-Balle-type pulsed beam spectrometer. The spectroscopic constants obtained for the normal C₅H₅⁴⁸TiC₇H₇ isotopomer are B = 771.78907(38), D_J = 0.0000295(41), and D_JK = 0.001584(73) MHz. The quadrupole hyperfine splittings for C₅H₅⁴⁷TiC₇H₇ were clearly observed and the measured constants are B = 771.79024(32) MHz, D_J = 0.0000395(33), D_JK = 0.001646(24), and eQq_aa = 8.193(40) MHz. Analysis of the experimental and theoretical rotational constants indicates that the η⁷-C₇H₇Ti and η⁵-C₅H₅Ti bond lengths in the gas phase are about 0.02 Å longer than those reported for the solid-state X-ray structure. The calculated Ti-C bond lengths are shorter for the C₇H₇ ligand (r(Ti-C) = 2.21 Å) than for the C₅H₅ ligand (r(Ti-C) = 2.34 Å), and the C₇H₇ H atoms are displaced 0.15 Å out of the C₇ plane, toward the Ti atom.     

Pressure broadening and collisional shift of the Rb D2 absorption line by CH4, C2H6, C3H8, n-C4H10, and He

The pressure broadening and shift rates of the rubidium D2 absorption line 5²S_1/2→5²P_3/2 (780.24 nm) with CH₄, C₂H₆, C₃H₈, n-C₄H₁₀, and He were measured for pressures ≤80 Torr using high-resolution laser spectroscopy. The broadening rates γ_B for CH₄, C₂H₆, C₃H₈, n-C₄H₁₀, and He are 28.0, 28.1, 30.5, 31.3, and 20.3 (MHz/Torr), respectively. The corresponding shift rates γ_S are −8.4, −8.8, −9.7, −10.0, and 0.39 (MHz/Torr), respectively. The measured rates of Rb for the hydrocarbon buffer gas series of this study are also compared to the theoretically calculated rates of a purely attractive van der Waals difference potential. Good agreement is found to exist between measured and theoretical rates.     

Crystal structure and ferromagnetism of (n-C3H7)4N[CoFe(dto)3] (dto=C2O2S2)

Recently, we have discovered a new type of first order phase transition around 120 K for (n-C₃H₇)₄N[Fe^IIFe^III(dto)₃] (dto=C₂O₂S₂), where the charge transfer transition between Fe^II and Fe^III occurs reversibly. In order to elucidate the origin of this peculiar first order phase transition. Detailed information about the crystal structure is indispensable. We have synthesized the single crystal of (n-C₃H₇)₄N[Co^IIFe^III(dto)₃] whose crystal structure is isomorphous to that of (n-C₃H₇)₄N[Fe^IIFe^III(dto)₃], and determined its detailed crystal structure. Crystal data: space group P6₃, a=b=10.044(2) Å, c=15.960(6) Å, α=β=90°, γ=120°, Z=2 (C₁₈H₂₈NS₆O₆FeCo). In this complex, we found a ferromagnetic transition at T_c=3.5 K. Moreover, on the basis of the crystal data of (n-C₃H₇)₄N[Co^IIFe^III(dto)₃], we determined the crystal structure of (n-C₃H₇)₄N[Fe^IIFe^III(dto)₃] by simulation of powder X-ray diffraction results.     

The chemisorption of CO,CO2, C2H2, C2H4, H2 and NH3 on the clean Fe(100) and (111) crystal surfaces

The chemisorption of small molecules (CO, CO₂, C₂H₂, C₂H₄, H₂ and NH₃) has been studied on the clean Fe(110) and (111) crystal faces by low-energy electron diffraction (LEED) and thermal desorption. C₂H₄ and C₂H₂ yield the same sequence of surface structures that change with temperature and crystal orientation. CO and CO₂ chemisorption similarly results in the formation of the same types of surface structures that change with surface temperature and crystal orientation. Ammonia forms several ordered surface structures on both iron crystal faces. All of the molecules decompose as a function of temperature on the iron surfaces as indicated by the Auger and thermal desorption spectra.     

Saturated absorption of C2H4 with a CO2 waveguide laser

Saturated spectroscopy of C₂H₄ was performed with a CO₂ waveguide laser. Seventeen lines were measured with a precision of the order of 200 kHz. On the basis of these data and of a new highly accurate determination of the ground-state rotational constants a better analysis of the ν₄, ν₇, and ν₁₀ levels was achieved.     

Interaction of O2, CO2, CO,C2H4 and C2H4O with Ag(110)

The interaction of O₂, CO₂, CO, C₂H₄ AND C₂H₄O with Ag(110) has been studied by low energy electron diffraction (LEED), temperature programmed desorption (TPD) and electron energy loss spectroscopy (EELS). For adsorbed oxygen the EELS and TPD signals are measured as a function of coverage (θ). Up to θ = 0.25 the EELS signal is proportional to coverage; above 0.25 evidence is found for dipole-dipole interaction as the EELS signal is no longer proportional to coverage. The TPD signal is not directly proportional to the oxygen coverage, which is explained by diffusion of part of the adsorbed oxygen into the bulk. Oxygen has been adsorbed both at pressures of less than 10^-4 Pa in an ultrahigh vacuum chamber and at pressures up to 10³ Pa in a preparation chamber. After desorption at 10³ Pa a new type of weakly bound subsurface oxygen is identified, which can be transferred to the surface by heating the crystal to 470 K. CO₂ is not adsorbed as such on clean silver at 300 K. However, it is adsorbed in the form of a carbonate ion if the surface is first exposed to oxygen. If the crystal is heated this complex decomposes into O_ad and CO₂ with an activation energy of 27 kcal/mol(1 kcal = 4.187 kJ). Up to an oxygen coverage of 0.25 one CO₂ molecule is adsorbed per two oxygen atoms on the surface. At higher oxygen coverages the amount of CO₂ adsorbed becomes smaller. CO readily reacts with O_ad at room temperature to form CO₂. This reaction has been used to measure the number of O atoms present on the surface at 300 K relative to the amount of CO₂ that is adsorbed at 300 K by the formation of a carbonate ion. Weakly bound subsurface oxygen does not react with CO at 300 K. Adsorption of C₂H₄O at 110 K is promoted by the presence of atomic oxygen. The activation energy for desorption of C₂H₄O from clean silver is ～ 9 kcal/mol, whereas on the oxygen-precovered surface two states are found with activation energies of 8.5 and 12.5 kcal/mol. The results are discussed in terms of the mechanism of ethylene epoxidation over unpromoted and unmoderated silver.     

Geometric shielding corrections for total cross section calculations of electron scattering by CH4, C2H6, C2H3F3, C2H4, C2F4, C2Cl4 and C2Cl2F2 from 30–5000?eV

To quantify the changes in the geometric shielding effect in a molecule as the incident electron energy varies, an empirical fraction, which represents the total cross section contributions of shielded atoms in a molecule at different energies, is presented. Using this empirical fraction, the total cross sections for electron scattering by CH₄, C₂H₆, C₂H₃F₃, C₂H₄, C₂F₄, C₂Cl₄ and C₂Cl₂F₂ are calculated over a wide energy range from 30 to 5000 eV by the additivity rule model at the Hartree-Fock level. The quantitative total cross sections are compared with those obtained by experiment and other theories where available. Good agreement is attained above 100 eV.     

Auger spectra of CO,C2H4, C2N2 and C6H6 adsorbed on Pt(111)

Electron excited carbon KVV Auger spectra of CO, C₂H₄, C₂N₂ and C₆H₆ adsorbed on Pt(111) are compared. By estimating the effective Coulomb interaction between the final-state holes it is possible to associate some features with transitions observed in free molecule spectra, but others must involve at least one electron with energy within the conduction band of the metal. Such “cross-transitions” are associated with strong 2π* character of filled states in the presence of a core hole in molecules such as CO.     

The influence of structural defects on the adsorption of simple molecules (H2, C2H2, C2H4, C2H6, CO,NO) on rhenium single crystals

Using Thermal Programmed Desorption (TPD), Low Energy Electron Diffraction (LEED) and Auger Electron Spectroscopy (AES) we have studied the adsorption of hydrogen-containing molecules (H₂, C₂H₂, C₂H₄, C₂H₆) and oxygen-containing molecules (CO and NO) on two vicinal planes of the Re(0001) surface. The two surfaces are designated thus: ReS ¦14(0001)(101̄1)¦, ReS |6(0001)(167̄1) | . The structural defects have little effect on the adsorption of hydrogen and the hydrocarbons. They are more influential in the case of the oxygen-containing molecules. This is particularly true for CO; on the kink sites the CO molecules can completely dissociate whereas only a partial dissociation is possible on the steps. These results should be viewed in relation to the strong bond energy between carbon and oxygen in a CO molecule of 256 kcal/mole and the great affinity of oxygen for rhenium; E_Re?O = 127 kcal/mole.     

Optical properties of natural quantum-well compounds (C6H5-CnH2n-NH3)2PbBr4 (n=1-4)

This paper describes the synthesis and characterization of self-assembled organic-inorganic layered perovskite compounds, (C₆H₅-C_nH_2n-NH₃)₂PbBr₄ (n=1-4). the effect of the number of carbon atoms of the alkyl chain length (n) on optical properties has been studied. (C₆H₅-C_nH_2n-NH₃)₂PbBr₄ films fabricated by spin-coating are microcrystalline form, single phase and oriented with the c-axis. Crystallinity, the maximum PL intensity and the lifetime of exciton emissions varied with the number of carbon atoms. the lowest-energy exciton splits into a few fine-structure levels at low temperatures. Time-resolved photoluminescence spectra reveal that (C₆H₅-C_nH_2n-NH₃)₂PbBr₄ shows both singlet and triplet excitons. with decreasing temperature, triplet exciton emissions become dominant for (C₆H₅-C_nH_2n-NH₃)₂PbBr₄ (n=1-3), while (C₆H₅-C₄H₈-NH₃)₂PbBr₄ shows mainly singlet exciton emissions. The intersystem crossing from excited singlet state to triplet state plays an important role in the relaxation process of excitons.     

High-precision frequency measurements of the ν1 + ν3 combination band of C2H2 in the 1.5 μm region

A pair of 1.5 μm semiconductor laser frequency standards have been developed for optical telecommunications use, stabilised to transitions of ¹²C₂H₂ and ¹³C₂H₂, using cavity-enhanced Doppler-free saturation absorption spectroscopy. The absolute frequencies of 41 lines of the ν₁ + ν₃ band of ¹²C₂H₂, covering the spectral region 1520-1545 nm, have been measured by use of a passive optical frequency comb generator, referenced to ¹³C₂H₂ transitions of known frequency. The mean experimental uncertainties (coverage factor k = 1) of the frequency values are 3.0 kHz (type A) and 10 kHz (type B). Improved values of the band origin ν₀, rotational constants B′ and B″, and centrifugal distortion coefficients D′, D″, H′, and H″ are presented.     

Absorption spectra of C6H6 and C6D6 near 340 nm

The absorption spectra of C₆H₆ and C₆D₆ in the liquid phase have been studied near 340 nm. The absorption spectrophotometric mounting was a sequential double-beam attachment with linear response to energy on scanning of the spectrum before the exit slit and an electronic device which gives directly either the absorbance or the integrated absorbance of a transition and, consequently, its oscillator strength.The oscillator strength measured for the band of C₆H₆ is 8×10^?8, which corresponds to a dipole moment of 2.4×10^?3 Debye; this value is of the same order as a theoretical value calculated by Tsubomura and Mulliken (3.8×10^?3 Debye) for a transition between states ³F and ³A of an oxygen-benzene pair. This agreement corroborates the hypothetical existence of such a transition.The first vibrational band is at 28553 cm^?1 for C₆H₆; this band is not observed in the vapor or solid phase. It corresponds probably to the transition 0-0, which is considered in the literature to be near 29500 cm^?1. The isotopic shift measured for this first band is 164 cm^?1. The vibrational frequencies are, respectively, 910 cm^?1 for C₆H₆ and 889 cm^?1 for C₆D₆.     

AP/(N2 + C2H2 + C2H4) gaseous fuel diffusion flame studies

Counterflow diffusion flame experiments and modeling results are presented for a fuel mixture consisting of N₂, C₂H₂, and C₂H₄ flowing against decomposition products from a solid AP pellet. The flame zone simulates the diffusion flame structure that is expected to exist between reaction products from AP crystals and a hydrocarbon binder. Quantitative species and temperature profiles have been measured for one strain rate, given by a separation of 5 mm, between the fuel exit and the AP surface. Species measured include C₂H₂, C₂H₄, N₂, CN, NH, OH, CH, C₂, NO, NO₂, O₂, CO₂, H₂, CO, HCl, H₂O, and soot volume fraction. Temperature was measured using a combination of a thermocouple at the fuel exit and other selected locations, spontaneous Raman scattering measurements throughout the flame, NO vibrational populations, and OH rotational population distributions. The burning rate of the AP was also measured for this flame’s strain rate. The measured eighteen scalars are compared with predictions from a detailed gas-phase kinetics model consisting of 105 species and 660 reactions. Model predictions are found to be in good agreement with experiment and illustrate the type of kinetic features that may be expected to occur in propellants when AP particles burn with the decomposition products of a polymeric binder.     

An inelastic neutron scattering study of C2H2 adsorbed on type 13X zeolites

The inelastic neutron scattering spectra of C₂H₂ and C₂D₂ adsorbed on a Ag⁺ exchanged 13X zeolite (0–800 cm^?1) and of C₂H₂ on the Na⁺ form (0–300 cm^?1) have been obtained. For the Na-13X system no distinct vibrational modes were observed, however for the Ag-13X systems the low frequency intramolecular modes of the adsorbed gas and some of the vibrations of the adsorbed gas relative to the surface have been assigned. From the deuteration shifts it appears that C₂H₂ and C₂D₂, adsorbed on Ag-13X, are non-linear.     

Leed and thermal desorption studies of small molecules (H2, O2, CO,CO2, NO,C2H4, C2H2 AND C) chemisorbed on the rhodium (111) and (100) surfaces

The chemisorption of H₂, O₂, CO, CO₂, NO, C₂H₄, C₂H₂ and C has been studied on the clean Rh(111) and (100) surfaces. LEED, AES and thermal desorption were used to determine the surface structures, disordering and desorption temperatures, displacement and decomposition characteristics for each species. All of the molecules studied readily chemisorbed on both surfaces. A large variety of ordered structures was observed, especially on the (111) surface. The disordering temperatures of most ordered surface structures on the (111) surface were below 100°C. It was necessary to adsorb the gases at 25° C or below in order to obtain well-ordered surface structures. Chemisorbed oxygen was readily removed from the surface by H₂ or CO gas at crystal temperatures above 50°C. CO₂ appears to dissociate to CO upon adsorption on both rhodium surfaces as indicated by the identical ordering and desorption characteristics of these two molecules. C₂H₄ and C₂H₂ also had very similar ordering and desorption characteristics and it is likely that the adsorbed species formed by both molecules is the same. Decomposition of ethylene produced a sequence of ordered carbon surface structures on the (111) face as a result of a bulk-surface carbon equilibrium. The chemisorption properties of rhodium appear to be generally similar to those of iridium, nickel and palladium.     

Far-infrared absorption intensities of H2O and D2O in C6H6

Far-i.r. absorption intensities have been measured for H₂O and D₂O in C₆H₆ solutions. Beer's law plots were found to be nonlinear. From the plots, the equilibrium constants of dimer formation in benzene were estimated to be 2.4M^-1 and 3.3M^-1 for H₂O and D₂O at 20°C, respectively. Based on Onsager's reaction field and including explicitly the effect of differences in molecular size between solute and solvent molecules, the internal moment of a water molecule and the volume ratio of a molecule to a cavity were estimated from the integrated absorption intensity of a D₂O monomer in C₆H₆ as 1.98 D and 0.7, respectively     

Microwave linewidths of C2H4O perturbed by H2, N2, O2 and CO2

Microwave linewidths of C₂H₄O (κ = -0.41) broadened by H₂, N₂, O₂, and CO₂ and considering dipole-quadrupole interactions have been calculated using the Mehrotra-Boggs theory (1977). This theory accounts satisfactorily for observed linewidths     

LEED and thermal desorption studies of small molecules (H2, O2, CO,CO2, NO,C2H4, C2H2 and C) chemisorbed on the stepped rhodium (755) and (331) surfaces

The chemisorption of H₂, O₂, CO, CO₂, NO, C₂H₂, C₂H₄ and C has been studied on the clean stepped Rh(755) and (331) surfaces. Low energy electron diffraction (LEED), Auger electron spectroscopy (AES) and thermal desorption spectroscopy (TDS) were used to determine the size and orientation of the unit cells, desorption temperatures and decomposition characteristics for each adsorbate. All of the molecules studied readily chemisorbed on both stepped surfaces and several ordered surface structures were observed. The LEED patterns seen on the (755) surface were due to the formation of surface structures on the (111) terraces, while on the (331) surface the step periodicity played an important role in the determination of the unit cells of the observed structures. When heated in O₂ or C₂H₄ the (331) surface was more stable than the (755) surface which readily formed (111) and (100) facets. In the CO and CO₂ TDS spectra a peak due to dissociated CO was observed on both surfaces. NO adsorption was dissociative at low exposures and associative at high exposures. C₂H₄ and C₂H₂ had similar adsorption and desorption properties and it is likely that the same adsorbed species was formed by both molecules.     

Structure and phase transitions in chloroantimonate(V) crystals: [(C2H5)3NH]SbCl6 and [(C2H5)3NH]SbCl6·1/2[(C2H5)3NH]Cl

New triethylammonium salts: [(C₂H₅)₃NH]SbCl₆ (TCA) and [(C₂H₅)₃NH]SbCl₆·1/2[(C₂H₅)₃NH]Cl (TCAT) have been synthesized. The compounds crystallise in monoclinic symmetry: space groups P2₁/n and P2₁/c, for TCA at 293 K and TCAT at 100 K, respectively. The crystal structure of [(C₂H₅)₃NH]SbCl₆ consists of discrete ionic pairs—triethylammonium cations and hexachloroantimonate anions—linked via the bifurcated N-H?Cl hydrogen bonds. The crystal structure of [(C₂H₅)₃NH]SbCl₆·1/2[(C₂H₅)₃NH]Cl is composed of three symmetrically independent triethylammonium cations, chlorine anion and two symmetrically independent hexachloroantimonate anions. TCA undergoes a structural phase transition at 336 K (on heating) into the orthorhombic C222 space group, whereas TCAT reveals a structural phase transition at 332 K. The phase transitions are of the first order type. TCA shows a ferroelastic domain structure below 336 K. Differential scanning calorimetry, dilatometric, dielectric dispersion and Raman scattering measurements have been used to study the phase transition mechanisms in these triethylammonium salts.