无机盐对辛基酚聚氧乙烯醚乙基磺酸钠临界胶束浓度的影响研究

在(25±0.2)℃的实验温度下,通过用表面张力法确定了辛基酚聚氧乙烯醚(10)乙基磺酸钠(OPS)在无机盐氯化物(LiCl,NaCl,KCl,MgCl2,CaCl2,BaCl2,AlCl3,FeCl3和SmCl3)水溶液中的临界胶束浓度(cmc)值,根据cmc值的变化得出无机盐反离子对非离子-阴离子型表面活性剂OPS的cmc值影响规律.实验数据分析表明,虽然非离子-阴离子型表面活性剂OPS分子中增加了一个非离子氧乙烯单元的亲水性基团,但其cmc值和无机盐反离子浓度[M]之间具有与离子型表面活性剂相似的线性关系:lgcmc=-4.242-(0.2980-0.0102Z/r)lg[M]([M]1mol/L),其中Z和r分别为反离子的价态和范德华原子半径的平均值.无机盐对OPS的cmc的影响具有离子型表面活性剂的性质,不具有非离子型或两性表面活性剂的性质.该关系式亦说明了水溶液中非离子-阴离子型表面活性剂OPS的cmc值与无机盐反离子的浓度、价态和范德华原子半径的平均值有关,反离子对胶束的结合度的大小取决于反离子的价态与范德华原子半径平均值的比值.最后就无机盐反离子对OPS的cmc影响机理进行了简要分析.     

一种酯类双季铵盐Gemini表面活性剂的合成研究

酯类双季铵盐Gemini表面活性剂含有正电荷性和酯类官能团,具有cmc低、高界面活性、易生物降解的特点。本研究先用三乙胺(TEA)和环氧氯丙烷(EPIC)合成新型季铵盐阳离子表面活性剂失水甘油基三乙基氯化铵(GTA)中间体,最后用GTA和己二酸反应合成得到一种新型酯类双季铵盐Gemini表面活性剂——双季铵盐己二酸酯表面活性剂(BQAA)。超声条件下得出BQAA合成的最佳条件为:超声频率:60KHz,反应体系pH=8,反应温度:50℃,n(GTA)∶n(己二酸)=2. 5∶1. 0,反应时间:6. 5h,BQAA为白色晶体,产率为88. 79%,通过元素分析和IR对产品BQAA进行了表征,对产物BQAA的表面活性、泡沫性能和乳化性能进行了研究,实验结果表明:BQAA的cmc=1. 3×10~(-4)mol·L~(-1),γ_(cmc)=27. 96 mN·m~(-1),泡沫形成稳定性高,起泡能力强,乳化能力好。     

新型腰果酚双子表面活性剂的合成及表面活性

以天然生物质腰果酚、1,3-二溴丙烷及氯磺酸为原料,通过醚化、磺化及中和三步反应合成了一类新型的腰果酚基磺酸盐双子(Gemini)表面活性剂.采用傅立叶转换红外光谱仪和核磁共振谱仪表征了产物的结构;采用滴体积法测定了腰果酚Gemini表面活性剂的表面张力,研究了水溶液的表面性质,并与相应的单基腰果酚基磺酸盐表面活性剂进行了对比.结果表明:腰果酚Gemini表面活性剂水溶液的临界胶束浓度(cmc)为6.20×10-2 mmol.L-1,远小于相应的单基腰果酚表面活性剂水溶液的cmc(8.40mmol.L-1);其临界表面张力γcmc为36.92mN.m-1,与单基腰果酚表面活性剂水溶液的相近(γcmc为38.41mN.m-1).与此同时,腰果酚Gemini表面活性剂水溶液的最小分子截面积Amin为0.27nm2,比相应的单基表面活性剂水溶液的小得多.     

表面活性剂的QSAR/QSPR研究进展*

本文综述了表面活性剂定量结构-活性/性质相关(QSAR/QSPR)研究的最新进展,以及相关结构描述符在表面活性剂QSAR/QSPR研究中的应用.重点介绍了表面活性剂的cmc和表面张力γ与分子结构的定量关系、离子型表面活性剂电荷分布的定量计算及其对胶体结构与性质的影响.对表面活性剂分子结构与活性/性质的定量相关研究的发展趋势进行了展望.     

稳态荧光探针法研究对-烷基-苄基聚氧乙烯醚羧酸甜菜碱的聚集行为

利用荧光探针法和表面张力法测定了一类疏水基中含有苯基的新型甜菜碱两性离子表面活性剂对-烷基-苄基聚氧乙烯醚羧酸甜菜碱(ABECB)的临界胶团浓度(cmc)、胶团微极性和表面张力(γ_cmc).研究结果表明,荧光探针(芘)法可用来测定这类表面活性剂的临界胶团浓度(cmc),且测定结果与表面张力法(吊片法)接近;ABECB具有较低的cmc和γ_cmc值,表明此类表面活性剂具有优良的表面活性; 胶团的微极性随着疏水链长的增大而略微减小,氧乙烯(EO)单元数的增大对ABECB胶团核内的微极性影响不明显.     

单一及复合表面活性剂对联苯菊酯微乳液的影响

通过对单一及复合型表面活性剂水溶液临界胶束浓度(CMC)和表面张力(γcmc)的测定分析,研究了表面活性剂对以水为介质、环己酮为溶剂形成的联苯菊酯质量分数为2.5%微乳液相行为及稳定性的影响.结果表明,在几种单一非离子表面活性剂中,苯乙烯基苯酚聚氧乙烯聚氧丙烯醚嵌段型非离子表面活性剂EPE的γcmc最低,为28.18 mN/m;按m(EPE):m(SDBS)=2∶1形成的复合型表面活性剂水溶液的γcmc更低,为27.60 mN/m,有利于O/W型微乳液的形成,当其质量分数为10%时,配制联苯菊酯质量分数为2.5%微乳液的有效成分热贮分解率为2.35%.     

一种新型表面活性剂的表面活性的研究

采用表面张力法确定了新型表面活性剂3-对壬基苯氧基-2-羟丙基三甲基溴化 铵的临界胶束浓度(cmc)，并考察了盐度、温度和pH值对其cmc的影响。结果表明， 此种表面活性剂的表面活性较高，盐度对其cmc影响最大，其次是pH值，温度对其 cmc的影响较为复杂。理论计算结果表明，采用热力学函数可较好地解释试验结果 。     

乙醇/水混合溶剂中Gemini表面活性剂的表面性质

通过对Gemini表面活性剂12-s-12 (Et)(s=4, 6, 8, 10, 12)体系在乙醇/水混合溶剂中的表面张力曲线的测定, 对该体系的表面性质进行了研究. 发现随乙醇/水比例变化, Gemini各种表面化学性质, 如临界胶束浓度(cmc)、表面张力(γcmc)、饱和吸附量(Γmax)和最小分子占有面积(Amin)等的变化规律. 拓展了Gemini表面活性剂在混合溶剂中表面吸附的研究.     

新型阴离子Gemini表面活性剂与非离子表面活性剂C10E6混合溶液的胶团化的研究

研究了烷基苯磺酸盐Gemini表面活性剂Ia与非离子表面活性剂C10E6溶液混合胶团中分子间的相互作用. 通过表面张力法测定了Ia 和C10E6不同比例不同温度下的临界胶束浓度(cmc). 结果表明, 两种表面活性剂以任何比例复配的cmc比单一表面活性剂的cmc都低, 表现出良好的协同效应. 传统型非离子表面活性剂C10E6、Gemini表面活性剂Ia及混合物的cmc都随着温度升高而降低. 而且, 任何配比的混合胶团中两种表面活性剂分子间的相互作用参数β都是负值, 这说明两种表面活性剂在混合胶团中产生了相互吸引的作用. 混合表面活性剂体系的胶团聚集数比单一Ia的大, 但比单一C10E6的小. 向Gemini表面活性剂Ia胶束中加入非离子表面活性剂C10E6会使胶束的微观极性变小.     

十二烷基硫酸钠与溴化正辛基三甲基铵混合表面活性剂水溶液的表面吸附及胶团形成

本文研究了盐存在时不同比例的十二烷基硫酸钠(简称12CH)和溴化正辛基三甲基铵(简称C8NBr)混合物的表面活性、表面吸附以及胶团形成等性质,结果表明:(1)正、负离子表面活性剂混合物具有很高的表面活性,不论其混合比例如何,临界胶团浓度(cmc)及cmc时溶液的表面张力(γcmc)皆较任何单一组分时小;(2)不论体相中比例如何,表面层中12CH和C8NBr的饱和吸附量的摩尔比皆～1.7且总饱和吸附量亦皆～5.2x10[-10]mol.cm[-2].由此求得表面层中分子截面积为32A[2],与由分子结构计算的数据相近,说明正、负表面活性离子排列紧密;(3)与碳链长相同的正、负离子型表面活性剂混合水溶液比较,本体系反应离子浓度对cmc有明显影响,证实表面层带电,胶团也带电;(4)计算了离子强度相同,温度不同时和温度相同、离子强度不同时的热力学量,得出离子强度大者易形成胶团。     

两相催化体系中双子表面活性剂对1-十二烯氢甲酰化反应的促进作用

报道了水溶性铑膦配合物组成的复合催化体系催化1-十二烯氢甲酰化反应中,双子表面活性剂[二溴化-(N,N,N′,N′-四甲基)-N,N′-二(十六烷基)-乙二铵]形成胶束的助催化作用.结果表明,在水/有机两相中,双子表面活性剂比单链表面活性剂CTAB具有更好加速催化反应的作用,并使烯烃氢甲酰化的区域选择性显著提高.这归因于双子表面活性剂有较低的cmc,可形成更加紧密规整的胶束结构,有利于增溶在胶束中的烯烃与铑催化剂配位和生成正构醛.     

Temperature dependence of second critical micelle concentration of dodecyldimethylbenzylammonium bromide in aqueous solution

The specific conductivity of dodecyldimethylbenzylammonium bromide (C12BBr) in aqueous solutions, in the temperature range of 15 to 40 °C, has been measured as a function of molality. The two breaks which were found on the conductivity against molality plots were attributed to the critical micelle concentration, cmc, and second critical micelle concentration, 2^nd cmc, respectively. The ratio of the slopes, S, of the three linear fragments on the plots, S2/S1 and S3/S1, was attributed to the degree of ionization of the micelles at cmc and 2^nd cmc respectively. It was shown that the values of the 2^nd cmc estimated above 27 °C are only apparent due to thermal disintegration of the micelles. In the temperature range of 15 to 27 °C, the values of the 2^nd cmc increase gradually and the plot of the 2^nd cmc against temperature is concave. The ratio of 2^nd cmc/cmc for C12BBr at 25 °C amounts to 15 and appears to be high compared to the literature values for other surfactants. For comparative purposes the cmc and 2^nd cmc values were also estimated conductometrically for decyldimethylbenzylammonium bromide (C10BBr) at 25 °C. The 2^nd cmc value for this surfactant is higher compared to the value for the C12 homologue by a factor of 2.6.The standard Gibbs free energies of micellization at cmc and at the 2^nd cmc were estimated from the experimental data for both surfactants at 25 °C.     

New fluorescence method for the determination of the critical micelle concentration by photosensitive monoazacryptand derivatives

A novel fluorescence method for the determination of the critical micelle concentration (cmc) is reported. The cmc values of nonionic and anionic surfactants were evaluated utilizing a photosensitive monoazacryptand-Ba2+ complex, whose fluorescence intensity is sensitively changed by environmental conditions based on the photoinduced electron transfer (PET) mechanism as a fluorescent probe (PET method). Based on a comparison of the cmc values obtained by the PET method versus those obtained by conventional fluorescence-based methods as well as the values reported in the literature, one can conclude that the PET method is useful for the cmc determination. In particular, the PET method was more effective for the cmc determination of nonionic surfactants with very low cmc values (< 10(-5) M) than any other fluorescence-based method. In the cases of anionic surfactants, the PET method revealed the formation of the premicellar aggregates comprised of surfactant molecules and fluorescent probes below the cmc. Moreover, the hydrophobicity around the monoazacryptand-Ba2+ complex incorporated into various nonionic surfactant micelles was evaluated by this PET method.     

Properties and Applications of Cryptand‐22 Surfactant for Ion Transport and Ion Extraction

A non‐ionic cryptand‐22 surfactant consisting of a macrocyclic cryptand‐22 polar head and a long paraffinic chain (C₁₀H₂₁‐Cryptand‐22) was synthesized and characterized. The critical micellar concentration (CMC) of the cryptand surfactant in ROH/H₂O mixed solvent was determined by the pyrene fluorescence probe method. In general, the cmc of the cryptand surfactant increased upon decreasing the polarity of the surfactant solution. The cryptand surfactant also can behave as a pseudo cationic surfactant by protonation of cryptand‐22 or complexation with metal ions. Effects of protonation and metal ions on the cmc of the cryptand surfactant were investigated. A preliminary application of the cryptand surfactant as an ion‐transport carrier for metal ions, e.g., Li⁺, Na⁺, K⁺ and Sr²⁺, through an organic liquid‐membrane was studied. The transport ability of the cryptand surfactant for these metal ions was in the order: K⁺ ≥ Na⁺ < Li⁺ < Sr²⁺. A comparison of the ion‐transport ability of the cryptand surfactant with other macrocyclic polyethers, e.g., dibenzo‐18‐crown‐6, 18‐crown‐6 and benzo‐15‐crown‐5, was studied and discussed. Among these macrocyclic polyethers, the cryptand surfactant was the best ion‐transport carrier for Na⁺, Li⁺ and Sr²⁺ ions. Furthermore, a foam extraction system using the cryptand surfactant to extract the cupric ion was also investigated.     

Synthesis and Properties of a New Piperazine-Based Bicaudate Gemini Surfactant

A novel bicaudate gemini surfactant was synthesized with anhydrous piperazine, chloride- bian, and 1-bromo dodecane as raw materials. Its structure was verified by infrared and ¹H NMR. The surface active properties of the bicaudate gemini surfactant in water were measured at 55°C. Its critical micelle concentration (cmc) and γ cmc was 0.50 mmol · L^?1 and 28.95 mN · m^?1, respectively. Results indicate that there was not a remarkable difference in γ_cmc values between the synthesized bicaudate surfactant and conventional gemini surfactant N,N′–bis (dodecyl dimethyl ammonium bromide)-3-oxa-1,5-pentadiammonium. The sterilizing antimicrobial performance of the bicaudate gemini surfactant was examined. The bicaudate gemini surfactant show excellent inhibition against 18 types of bacteria compared with conventional monomeric surfactant and gemini surfactant at concentrations of 50 mg/L.     

系列磺丁基甜菜碱的表征及表面活性

用FT-IR、1H NMR和元素分析对自制的3种磺丁基甜菜碱(SBm-4)的结构进行了表征,研究了它们的表面性能、泡沫性能和乳化性能。 获得SB12-4的cmc为2.20×10-3 mol/L,γcmc为31.48 mN/m;SB14-4的cmc为2.80×10-4 mol/L,γcmc为29.68 mN/m;SB16-4的cmc为2.30×10-5 mol/L,γcmc为32.06 mN/m。 3种磺丁基甜菜碱的cmc值随着烷基链长增加逐渐减小,γcmc先减小后增加,三者的起泡性随浓度增加而增加,到一定值后保持不变;泡沫稳定性随浓度增加逐渐增强,起泡性随着温度的增加有缓慢增加趋势,泡沫稳定性随温度增加逐渐降低。 3种表面活性剂的乳化能力随浓度增加先增加后降低。     

两相催化体系中双子表面活性剂对1-十二烯氢甲酰化反应的助催化作用

合成了几种具有刚性连接基团的双子表面活性剂,研究了它们在Rh-TPPTS体系中催化长链烯烃氢甲酰化反应中的助催化作用.结果表明,在水/有机两相催化体系中,新型双子表面活性剂的助催化作用比单链表面活性剂CTAB更好,在较低的表面活性剂浓度下能得到较高的反应转化率.这归因于此类表面活性剂有较低的cmc,降低界面张力的能力和对1-十二烯的增溶能力比CTAB更强.     

AFM study on the wettability of mica and graphite modified with surfactant DTAB

In this work atomic force microscopy (AFM) was applied to study the wettability of mica and graphite modified with surfactant dodecyltrimethylammonium bromide (DTAB) at varying DTAB concentrations (below the cmc) and adsorption time. The coverage states of DTAB on surfaces were analyzed from the AFM images, while the contact angle measurement was made for the wettability of DTAB-modified surfaces. The experimental results have shown that the adsorption aggregates formed as needle-like dots covering on the mica surface with the surfactant concentration of 10^?6–10^?4?mol/L. The coverage of DTAB aggregates increased with the increasing concentration, leading to a strong hydrophobicity on the surfaces. However, the large aggregates which might be caused by bilayer adsorption of surfactant occurred on mica surface at surfactant concentration of 10^?3?mol/L, resulting in the reverse of the wettability as the adsorption time extended. In the case of hydrophobic graphite, DTAB aggregates mainly formed as stripe covering on the surfaces, leading to the reduction of hydrophobicity. This reduction became stronger as more DTAB aggregates covered on graphite surfaces.     

Investigation of oxidation and tautomerization of a recently synthesized Schiff base in micellar media using multivariate curve resolution alternative least squares and rank annihilation factor analysis methods

The oxidation of the recently synthesized Schiff base 3,6-bis((2-aminoethyl-5-Br-salicyliden)thio)pyridazine (PABST) with hydrogen peroxide was investigated using spectrophotometric studies. The reaction rate order and observed rate constant of the oxidation reaction was obtained in the mixture of N,N-dimethylformamide (DMF):water (30:70, v/v) at pH 10 using multivariate cure resolution alternative least squares (MCR-ALS) method and rank annihilation factor analysis (RAFA). The effective parameters on the oxidation rate constant such as percents of DMF, the effect of transition metals like Cu²⁺, Zn²⁺, Mn²⁺ and Hg²⁺ and the presence of surfactants were investigated. The keto-enol equilibria in DMF:water (30:70, v/v) solution at pH 7.6 was also investigated in the presence of surfactants. At concentrations above critical micelle concentration (cmc) of cationic surfactant cetyltrimethylammonium bromide (CTAB), the keto form was the predominant species, while at concentrations above cmc of anionic surfactant sodium dodecyl sulfate (SDS), the enol form was the predominant species. The kinetic reaction order and the rate constant of tautomerization in micellar medium were obtained using MCR-ALS and RAFA. The results obtained by both the methods were in a good agreement with each other. Also the effect of different volume percents of DMF on the rate constant of tautomerization was investigated. The neutral surfactant (Triton X-100) had no effect on tautomerization equilibrium.     

乙二亚甲基-双（十六烷基二甲基溴化铵）稀水溶液的特性

合成并表征了阳离子Gemini表面活性剂乙二亚甲基-α,β-双（十六烷基二甲基溴化铵）（16-2-16）.用表面张力和粘度法确定了其cmc，通过表面张力曲线计算了16-2-16的表面吸附量、吸附分子面积和胶束形成自由能；并用悬滴法测定了16-2-16在空气表面和十二烷界面的动态表（界）面张力.用改进的Washburn方法测定16-2-16水溶液在硅胶粉末表面的接触角，并进一步讨论了16-2-16在硅胶表面的吸附引起的润湿性变化. 探讨润湿性变化与动态张力的关系. 将16-2-16 与溴代十六烷基三甲胺(CTAB)做比较:两种物质在含油硅胶粉末上引起的最高脱油率（实验室模拟驱油）均发生在cmc附近,但16-2-16的最高脱油率是68％， CTAB的是63％.而所用CTAB的cmc比16-2-16的约大50倍,也就是说用16-2-16可以获得更高的脱油率.