Bioactive compounds produced in animal tissues (I); two diketopiperadine plant growth regulators containing hydroxyproline isolated from rabbit skin tissue extract

A tricyclic diketopiperadine, L-hydroxyprolyl-L-proline anhydride and a bicyclic diketopiperadine, L-hydroxyprolyl-L-leucine anhydride, were isolated as plant growth regulators from skin tissue extract of rabbits.     

Ultra high pressure liquid chromatography for crude plant extract profiling

Ultra high pressure liquid chromatography (UHPLC) systems operating at very high pressures and using sub-2 microm packing columns have allowed a remarkable decrease in analysis time and increase in peak capacity, sensitivity, and reproducibility compared to conventional HPLC. This technology has rapidly been widely accepted by the analytical community and is being gradually applied to various fields of plant analysis such as QC, profiling and fingerprinting, dereplication, and metabolomics. For many applications, an important improvement of the overall performances has been reported. In this review, the basic principles of UHPLC are summarized, and practical information on the type of columns used and phase chemistry available is provided. An overview of the latest applications to natural product analysis in complex mixtures is given, and the potential and limitations as well as some new trends in the development of UHPLC are discussed.     

Transitions/relaxations in polyester adhesive/PET system

The correlations between the transitions and the dielectric relaxation processes of the oriented poly(ethylene terephthalate) (PET) pre-impregnated of the polyester thermoplastic adhesive have been investigated by differential scanning calorimetry (DSC) and dynamic dielectric spectroscopy (DDS). The thermoplastic polyester adhesive and the oriented PET films have been studied as reference samples. This study evidences that the adhesive chain segments is responsible for the physical structure evolution in the PET-oriented film. The transitions and dielectric relaxation modes’ evolutions in the glass transition region appear characteristic of the interphase between adhesive and PET film, which is discussed in terms of molecular mobility. The storage at room temperature of the adhesive tape involves the heterogeneity of the physical structure, characterized by glass transition dissociation. Thus, the correlation between the transitions and the dielectric relaxation processes evidences a segregation of the amorphous phases. Therefore, the physical structure and the properties of the material have been linked to the chemical characteristics.     

Effect of methanolic plant extract on copper electro-polishing in ortho-phosphoric acid

The behavior of copper electro-polishing in ortho-phosphoric acid using the galvanostatic polarization method was ascertained. This was examined via measuring and comparing anode potential –limiting current relationship in solution of regularly mounting concentrations (from 50 to 1800 ppm of methanolic Allium sativum (garlic extract), Tilia cordata (Tilia leafs), Foeniculum vulgare (fennel seeds), and Lablab purpureus (Dolichos lablab extract) and weight loss method. Influence of temperature on the dissolution kinetics were investigated. First order kinetic is applicable to the copper dissolution in solution containing plant extracts. Surface morphologies, brightness and roughness of polished specimens were examined with a scanning electron microscope (SEM), reflectance and atomic force microscope (AFM). Addition of methanolic plant extract to electro-polishing solution produce a lesser limiting current. According to SEM, UV–VIS-NIR spectra and surface roughness measurements, addition of high concentration (1800 ppm) of methanolic plant extract to the electrolytic solution is highly effective to enhance surface quality. High reflection property is obtained when the different type of methanolic plant extract is added to the electro-polishing electrolyte. The minimum Ra and PV values are achieved by garlic extract, which records the highest reflectance value and inhibition efficiency. Weight loss data obtained is excellent conformity with the result obtained by electrochemical measurements.     

Molecular design of three-dimensional artificial extracellular matrix: Photosensitive polymers containing cell adhesive peptide

A photodimerizable monomer, methacrylic acid-(7-coumaroxy) ethyl ester, was synthesized and was copolymerized with a hydrophilic monomer (N,N-dimethylacrylamide) to obtain a water-soluble photosensitive polymer. Irradiation of the copolymer film and aqueous solution with a high-pressure mercury lamp resulted in highly hydrated gel. The gel yield was enhanced with the content of the photodimerizable group in the copolymer and the irradiation time. The degree of swelling of the gels decreased concomitantly. Incorporation of the well-known cell adhesive peptidyl ligand Arg-Gly-Asp-Ser(RGDS) into photosensitive copolymers attained a biologically active hydrophilic gel matrix upon UV light irradiation. Irradiation of a buffer solution of the latter copolymer premixed with smooth muscle cells entrapped the cells throughout the gel matrix. This indicates that the designed polymer and the resulting cell-incorporated hydrogel are biomimic to an extracellular matrix and to the media of the vascular wall, respectively. © 1993 John Wiley & Sons, Inc.     

Micellar electrokinetic capillary chromatography for selected tropane alkaloid analysis in plant extract

Summary Micellar electrokinetic capillary chromatography was applied to the simultaneous analysis of six tropane alkaloids, including hyoscyamine and scopolamine. Successful results were obtained using a 30 mM boratephosphate buffer at basic pH (8.5) in the presence of 50 mM sodium dodecyl sulfate. The operating conditions, such as buffer concentration and pH, micelle concentration and organic modifier type and percentage were also discussed on the basis of the results given with a tropane alkaloid mixture. Addition of organic modifiers showed an improvement in separation efficiency and resolution. Moreover, hyoscyamine and littorine, two positional isomers, were only resolved by the addition of organic solvents such as methanol or acetonitrile. The optimized conditions were finally applied to the analysis of tropane alkaloids found in genetically transformed root cultures ofDatura candida x D. aurea. Dedicated to Professor Werner Haerdi on the occasion of his 70^th birthday.     

Acrylate-based pressure sensitive adhesive in fabrication of transdermal therapeutic system

An acrylate-based pressure sensitive adhesive (PSA) was synthesized to incorporate in a design of a drug-in-adhesive (DIA) type transdermal therapeutic system (TTS) for nitrendipine and nicorandil in treatment of hypertension and angina pectoris, respectively. Solutions of 2-ethylhexyl acrylate (EHA; 85% w/w), methyl methacrylate (MMA; 10% w/w), acrylic acid (AA; 3% w/w) and vinyl acetate (VA; 2% w/w) in either ethyl acetate, acetone or methanol were polymerized under free radical conditions to synthesize the PSA. The effects of solvent, reaction time, initiator concentration and reaction temperature on polymerization were studied. The resultant copolymers were characterized by ¹H-NMR, IR, differential scanning calorimetry (DSC) and gel permeation chromatography (GPC) and the intrinsic viscosities, refractive index, peel strength, moisture uptake and skin irritation potential were determined. The PSA was used to develop DIA type patches for delivery of nitrendipine and nicorandil. The TTS were evaluated for thickness, weight, peel strength, moisture uptake, in vitro release and in vitro skin permeation through guinea-pig skin. The copolymer found to effectively control the rate of drug release and the corresponding TTSs could be successfully employed in transdermal delivery of nitrendipine and nicorandil. Copyright © 2003 John Wiley & Sons, Ltd.     

Polydimethylsiloxane–cristobalite composite adhesive system for aerospace applications

The effect of phase‐pure cristobalite (a high temperature crystalline polymorph of silica) on the adhesive characteristics of hydroxyl terminated polydimethylsiloxane (PDMS) was studied. The potential advantages of PDMS/cristobalite composite system as an adhesive for aerospace applications are also discussed. A PDMS/cristobalite composite adhesive system containing different filler contents (0–46 volume percentage, vol%) was prepared. The filler material, phase‐pure cristobalite, was synthesized by the pyrolysis of fused silica at 1400°C. The mechanical, rheological, and thermal characteristics of the composites were studied. A high yield stress (0.151 Pa), shear‐thinning index (1.051), and fast recovery rate were observed for ～34 vol% cristobalite loading, which indicate that PDMS retains its excellent adhesive and flow characteristics even at high filler loading with enhanced mechanical characteristics. Thermal analysis shows the onset of degradation of PDMS shifts to higher temperatures, 372–438°C and 317–417°C in nitrogen and air atmosphere respectively, which shows excellent thermal stability. The residual component yields after thermal degradation of PDMS/cristobalite composite system in nitrogen and air atmosphere show different degradation mechanisms. Copyright © 2008 John Wiley & Sons, Ltd.     

Fracto-emission accompanying adhesive failure in a model fiber pull-out system

Fracto-emission (FE) is the emission of particles and photons during and after fracture of materials. The observed emission includes electrons, negative and positive ions, neutral species in both ground states and in excited states, and visible photons. This emission can often serve as a sensitive probe of crack growth and may prove to be a useful tool for investigating molecular and microscopic events accompanying crack growth and for studying the details of failure modes in a variety of materials. Here, we examine photon and electron emission during failure of axially loaded stainless steel fixtures (e.g., rods) embedded in epoxy. These experimental data provide time resolved information on the sequence of events leading to interfacial fracture proceeding pullout. In addition, we examine the emissions during frictional pullout which over a large range of strain rates exhibits stick-slip behavior. Relations of these emissions to the fracture and pullout processes are discussed.     

Multifunctional bacterial cellulose-gelatin containing mangosteen extract films with improved antibacterial and anticancer properties

Cellulose - In this study, we developed green composites made of homogenized-bacterial cellulose, that is, gelatin containing different concentrations of mangosteen extract using tannin as a...     

Microencapsulation of extract containing shikonin using gelatin-acacia coacervation method: a formaldehyde-free approach

The application of microcapsule for pharmaceutical dosage form for various drugs has received considerable attention in recent years due to its multiple advantages. The most frequently used crosslinking agent formaldehyde in the gelatin–acacia microencapsulation process was altered by glycerol in this study. The effect of various parameters such as the concentration of surfactant, concentration of gelatin and continuous phase pH condition on the microcapsule particle size distribution was experimentally investigated. It was shown that the optimum concentration for surfactant/oil ratio is 1/10 and gelatin/oil ratio is 1/5 in the pH condition of approximately 4–6 for the coacervation process. Results obtained from microscopy observation revealed that one core microcapsule prepared by 6% glycerol was no different from formaldehyde. Hence, glycerol was demonstrated to be a good potential non-toxic crosslinking material for the applications of encapsulated extract containing shikonin.     

Matrix polymerization of aniline in the presence of polyamides containing sulfo acid groups

The matrix synthesis of polyaniline in the presence of water-soluble aromatic polyamides containing sulfo acid groups has been studied. It has been shown that the nature of polyacid and the concentration of reagents affect the shape and dynamics of a change in absorption spectra. The S-shaped profile of kinetic curves for spectra variation and the experiments on the seed polymerization provide evidence for the autocatalytic character of polymerization. It has been concluded that, depending on the nature of polyacid, polymer complexes form in which polyaniline macromolecules are situated along main chains of polyacid macromolecules (the two-stream structure) or appear as side chains of polyacid macromolecules (the comb-shape structure). In the latter case, polyaniline macromolecules serve as ionic bridges crosslinking polyacid macromolecules, as is confirmed by the viscometric study of solutions in the course of polymerization.     

Thermal characterization of dried extract of medicinal plant by DSC and analytical techniques

The increased search for herbal products has generated an increasing interest in improving the quality control of dried extracts by pharmaceutical industry since these are raw materials of great importance by their quality and versatility. This work aimed at the application of various analytical techniques (thermal analysis, X-ray diffraction, scanning electron microscopy, and infrared Fourier transform spectroscopy) in the characterization of dried extracts of two plants from the Brazilian semiarid region with medicinal properties. The DSC curves for the dried extracts of Ximenia americana L. and Schinopsis brasiliensis Engl. showed that thermal processes occur between 33.50 and 118.58 °C and between 39.17 and 126.14 °C. The X-ray powder diffraction revealed high degree of amorphization, but the dried extract of X. americana L. showed some diffraction peaks of high intensity. The IR spectra showed high variety of metabolites in the extracts dried. Through this study it was possible to verify the feasibility of applying these techniques in the characterization of raw materials from medicinal plants for use in the herbal medicines production.     

Matrix polyelectrolyte microcapsules: new system for macromolecule encapsulation

A new approach to fabricate polyelectrolyte microcapsules is based on exploiting porous inorganic microparticles of calcium carbonate. Porous CaCO3 microparticles (4.5-5.0 microns) were synthesized and characterized by scanning electron microscopy and the Brunauer-Emmett-Teller method of nitrogen adsorption/desorption to get a surface area of 8.8 m2/g and an average pore size of 35 nm. These particles were used as templates for polyelectrolyte layer-by-layer assembly of two oppositely charged polyelectrolytes, poly(styrene sulfonate) and poly(allylamine hydrochloride). Calcium carbonate core dissolution resulted in formation ofpolyelectrolyte microcapsules with an internal matrix consisting of a polyelectrolyte complex. Microcapsules with an internal matrix were analyzed by confocal Raman spectroscopy, scanning electron microscopy, force microscopy, and confocal laser-scanning fluorescence microscopy. The structure was found to be dependent on a number of polyelectrolyte adsorption treatments. Capsules have a very high loading capacity for macromolecules, which can be incorporated into the capsules by capturing them from the surrounding medium into the capsules. In this paper, we investigated the loading by dextran and bovine serum albumin as macromolecules. The amount of entrapped macromolecules was determined by two independent methods and found to be up to 15 pg per microcapsule.     

Synthesis of hybrid molecules containing fragments of sesquiterpene lactones and plant alkaloids

The Pd-catalyzed arylation of isoalantolactone by deoxyvasicinone and lappaconitine halides occurred with formation mainly of cross-coupling products with the (E)-configuration of the double bond. Another three compounds were isolated from the reaction of isoalantolactone with 6-bromodeoxyvasicinone. These were the lactone diarylation product, a compound with the (Z)-configuration of the double bond, and a product with a shift of the C(11,13) double bond and configuration inversion at C(8). The new compounds are interesting as potential biologically active agents.     

Sensitivity of protein adsorption to architectural variations in a protein-resistant polymer brush containing engineered nanoscale adhesive sites

Patchy polymer brushes contain nanoscale (5-15 nm) adhesive elements, such as polymer coils or nanoparticles, embedded at their base at random positions on the surface. The competition between the brush's steric (protein resistant) repulsions and the attractions from the discrete adhesive elements provides a precise means to control bioadhesion. This differs from the classical approach, where functionality is placed on the brush's periphery. The current study demonstrates the impact of poly(etheylene glycol) (PEG) brush architecture and ionic strength on fibrinogen adsorption on brushes containing embedded poly-l-lysine (PLL, 20K MW) coils or "patches". The consistent appearance of a fibrinogen adsorption threshold, a minimum loading of patches on the surface, below which protein adsorption does not occur, suggests multivalent protein capture: Adsorbing proteins simultaneously engage several patches. The surface composition (patch loading) at the threshold is extremely sensitive to the brush height and ionic strength, varying up to a factor of 5 in the surface loading of the PLL patches (~50% of the range of possible surfaces). Variations in ionic strength have a similar effect, with the smallest thresholds seen for the largest Debye lengths. While trends with brush height were the clearest and most dominant, consideration of the PEG loading within the brush or its persistence length did not reveal a critical brush parameter for the onset of adsorption. The lack of straightforward correlation on brush physics was likely a result of multivalent binding, (producing an additional dependence on patch loading), and might be resolved for univalent adsorption onto more strongly binding patches. While studies with similar brushes placed uniformly on a surface revealed that the PEG loading within the brush is the best indicator of protein resistance, the current results suggest that brush height is more important for patchy brushes. Likely the interactions producing brush extension normal to the interface act similarly to drive lateral tether extension to obstruct patches.     

Analysis of selected withanolides in plant extract by capillary electrochromatography and microemulsion electrokinetic chromatography

Microemulsion electrokinetic chromatography (MEEKC) coupled with a diode-array detector was developed for the simultaneous analysis of natural steroidal compounds, withanolides including withaferin A, withacnistin and iochromolide. Optimal resolution was obtained with a microemulsion consisting of 70 mM octane, 800 mM 1-butanol, 100 mM sodium dodecyl sulfate (SDS), and 10 mM phosphate-borate buffer (pH 7) using a fused-silica capillary at 25 kV and 40 degrees C. Since this technique is not compatible with mass spectrometry detection, a capillary electrochromatographic method was developed to separate the investigated withanolides. The effects of mobile phase composition and pH were systematically investigated. Complete separation was obtained with a capillary electrochromatography (CEC) Hypersil C18 bonded silica column (packed length, 25 cmx100 microm ID and 375 microm OD), packed with 3 microm particles. The mobile phase consisted of formic acid-ammonia, pH 8 / acetonitrile (40/60 v/v); the voltage was set at 25 kV and the temperature at 20 degrees C. Under these conditions, resolution of these closely related compounds, including the critical pair withacnistin and iochromolide, was achieved in less than 5 min. The separations by MEEKC and CEC were compared with that obtained by reversed-phase liquid chromatography and showed similar retention order, indicating the analogy of the retention mechanism of these techniques. To further improve specificity and sensitivity, the developed CEC method was interfaced with electrospray ionization mass spectrometry using a Teflon connection between the CEC column and a void fused-silica capillary. Finally, the described methods were applied to the qualitative analysis of withanolides in Iochroma gesnerioides plant extract.