LED作为量子效率仪中单色光的可行性研究

随着LED技术的不断进步,已发展出多种波长的大功率LED,不用昂贵的单色仪,而采用各种波长的LED作为单色光来制造量子效率仪;也不需要旋转滤色片轮切换滤色片来避免光栅单色仪中高级次光谱的影响。LED作为单色光,可实现无机械运动、测量速度快、故障率低的优点。多只LED焊接在PCB上形成离散型光源,无法采用常规的椭球面反射镜、透镜或凹面反射镜进行汇聚。采用高反射率反射镜片制备成锥形光导管,将离散型光源发出的光汇聚为一个小光斑,可以很好地解决离散型光源汇聚难的问题,同时实现了高的光利用率。通过测量LED的波峰值、半峰宽和稳定性,并与传统的卤素灯和氙灯为光源的传统量子效率仪进行比较,发现单色光的波峰值与量子效率的测量准确性是正相关的,波峰值越高,测量的准确性越高;半峰宽在5.1~9.5 nm范围内,半峰宽对测量的准确性没有影响。采用LED、卤素灯和氙灯量子效率仪分别测试同一块太阳电池的量子效率,计算相同波段的积分电流,与世界先进的氙灯量子效率仪相比,相对偏差为0.34%,与卤素灯量子效率仪的相当,说明半峰宽在5.1~55.7 nm范围内,测量准确性与半峰宽无明显的相关性;LED的不稳定度为0.4%,介于氙灯和卤素灯之间。从这几个方面来看,LED是可以作为单色光用于量子效率的测试。     

仪器分辨率对氧气A带被动测距的影响分析

透过率的计算是红外目标被动测距技术的核心,其精度直接影响到被测距离的精度,而仪器分辨率又直接影响到光谱信号的精度。为了研究光谱仪器分辨率对带平均透过率的影响,选用氧气A带为研究对象,采用基线拟合方式计算被测目标的带平均透过率,利用随机Malkmus模型计算被测目标距离,从而获得仪器分辨率对被动测距的影响。为此,搭建了被动测距实验系统,通过对卤素灯光源在不同距离的光谱测量,验证仪器分辨率对带平均模式被动测距的影响。首先,介绍氧气A带透过率的计算方法,计算理论值;以卤素灯为光源,利用光谱仪分别测量相同距离不同分辨率的光谱曲线,计算实测大气透过率,分析光谱分辨率对单谱线的影响;然后,在分析比较透过率模型和实测透过率谱线的基础上,对透过率计算模型进行拟合、校正,验证光谱分辨率对带模型的影响。对于单条谱线,仪器的不同分辨率可测得的谱线区别较大,而对带平均谱线,相同波数点的光谱信号取平均,获得平均效应,使得被测谱线几乎没有变化;分辨率的模型选择需根据不同的应用场合、不同的精度要求选择合适的分辨率。实验结果表明：分辨率对单谱线的透过率影响较大,随着分辨率的降低,被捕获的光谱信息点取值越少,被测目标距离相关系数越小;分辨率对带平均透过率的计算影响较小,不同分辨率下测得的目标距离,几乎重合;而仪器分辨率越高则测量时间越长,当使用带平均透过率计算被测目标距离,在精度要求范围内,可以适当降低仪器分辨率,从而极大地提高测量速度,并达到测量实时性,同时降低系统搭建的成本。该结论可为透过率测量的应用提供依据。     

大倾斜角度下基于冷原子重力仪的绝对重力测量

冷原子重力仪的倾斜角会对绝对重力测量产生显著的影响.高精度的绝对重力测量需要对重力仪的倾斜角进行精确的测量、控制及校正.本文从理论上分析了四种不同情况下倾斜对绝对重力测量的影响规律,并在实验上对得到的理论进行了实验验证.基于此,设计了一种基于双倾斜计的绝对重力测量方案,主要是为了解决恶劣测量环境下的冷原子重力仪倾斜漂移问题.此方案利用高精度倾斜计记录放置在被动隔振平台上的拉曼反射镜的倾斜角度,并使用另外一个倾斜计监控真空系统的倾斜,以实现振动噪声的抑制和倾斜的高精度测量.基于自研的小型化冷原子重力仪,对该方案进行了实验验证,并最终实现了车间复杂环境下的高精度绝对重力测量.由于倾斜得到精确测量和补偿,冷原子重力仪的测量精度达到了12.3μGal.本文为复杂环境下的高精度绝对重力测量提供了一种可行的方案,为冷原子重力仪的实用化提供了参考数据.     

Effect of damping on the propensity of squeal instability: an experimental investigation

Friction induced vibrations in automotive brakes is recognized as a major problem in industry. Squeal is a difficult subject because of its unpredictability caused by a not completely understood sensitivity to variation of the system parameters. In the literature several analytical and numerical studies deal with the relationship between damping and system propensity to have instability. These studies highlight the existence of a nonintuitive effect of damping distribution on modal coupling that gives rise to the unstable vibrations. The complexity of commercial brakes and the difficulties to identify the values of modal damping in brake assemblies lead to the necessity to rely on experimental analysis using simplified test rigs. This paper presents an experimental investigation of the relationship between the distribution of modal damping and the propensity to develop squeal in a beam-on-disk setup, which reliably reproduces squeal events with easy control and measurement of the damping of the disk and the beam, respectively. The experiments highlight the key role played by the modal damping distribution on squeal: A nonuniform repartition of the modal damping causes an increase of the squeal propensity.     

利用统计处理方法提高动态光谱的检测精度

近红外光谱法成分检测因其检测方法的优越性,已成为生物医学领域的研究热点。目前国内外相关研究虽然广泛,可是还没有进入实际临床应用的报道。关键是现有检测方法中存在着个体差异,测量条件的影响,使光谱检测精度达不到要求,因此提高检测精度是血液成分无创检测得以实现的关键。文章在最近提出的一种新的近红外血液成分检测方法-动态光谱法的基础上,利用传统的统计处理方法,通过剔除含有粗大误差的奇异点和多次测量统计平均来提高动态光谱检测精度。实验结果表明含粗大误差的奇异点剔除和多次测量统计平均能够提高动态光谱的检测精度。     

Influence of wall vibrations on the behavior of a simplified wind instrument

The issue of the influence of wall vibrations on the behavior of wind instruments is still under debate. The mechanisms of vibroacoustic couplings involved in these vibrations are difficult to investigate, as fluid-structure interactions are weak. Among these vibroacoustic interactions, the present study is focused on the coupling between the internal acoustic field and the mechanical behavior of the duct. For this purpose, a simplified single reed instrument consisting of a brass tube connected to a clarinet mouthpiece has been studied. A theoretical model of coupling between the plane inner acoustic wave and mechanical modes is developed and suggests that in order to obtain measurable effects of wall vibrations, the geometrical parameters of the studied tube have to be unusual compared to that of real instruments. For a slightly oval-shaped and very thin brass tube, it is shown theoretically and experimentally that a coupling between the inner plane acoustic wave and ovalling mechanical modes occurs and results in disturbances of the input impedance, which can slightly affect the tone color of the sound produced. It is concluded that the reported effects are unlikely to occur in real instruments except for some organ pipes.     

Uncertainty of array-based measurement of radiated and absorbed sound intensity

Patch near-field acoustic holography (NAH) coupled with an array of sound intensity probes allows separating the sound field incident on a surface from the one radiated by the surface itself. Although the measurement principle has been successfully used to separate the noise source contribution from disturbing sources and/or noise reflections, the method accuracy has not been investigated in the literature. We describe the results of experiments meant to evaluate the uncertainty in the identification of noise radiated by vibrating panels with different absorption characteristics in presence of an incident acoustic radiation using the statistically optimized near-field acoustic holography. Measurement errors were evaluated through tests performed in controlled acoustic conditions. Results evidenced that the measurement uncertainty depends on the accuracy of the microphone array positioning and on the incident sound field. These conclusions were in agreement with the results obtained by simulations in the phase of instrument optimization.     

A solution to diffraction biases in sonoelasticity: the acoustic impulse technique.

Several methods have been proposed to estimate the viscoelastic properties of soft biological tissues using forced low-frequency vibrations (10-500 Hz). Those methods are based on the measurement of phase velocity of the shear waves (approximately 5 m/s). It is shown in this article that the measurements of velocity as well as attenuation are subjected to biases. These biases are related to reflected waves created at boundaries, to the nonnegligible size of the piston source which causes diffraction effects and to the influence of a low-frequency compressional wave. Indeed, a theoretical analysis of the field radiated by a point source explains how mechanical vibrations of a piston generate a shear wave with a longitudinal component and how this component can interfere with a low-frequency compressional wave. However, by using a low-frequency transient excitation, these biases can be avoided. Then the precise numerical values of elasticity and viscosity can be deduced. Experiments in phantoms and beef muscles are shown. Moreover, a relative hardness imaging of a phantom composed of two media with different elasticities is presented.     

Two-axis-scanning laser Doppler vibrometer for precision engineering

Laser Doppler vibrometer (LVD) has been the most favorite instrument for precision dynamics measurement due to its non-contact, high accuracy and high resolution. However, LDV can only give the dynamic data of a particular location on the entire feature. In order to get the whole field data, a laser beam-scanning mechanism has to be implemented. Currently, motor-driven scanning mirror is used to move the measurement probe from one point to another. The mechanical vibrations of the scanning mirror will reduce the measurement accuracy. This paper introduces a novel scanning LDV optical system embodied in an acousto-optic deflector scanning mechanism. It can improve the measurement accuracy since there is no mechanical motion involved. One main advantage of this system is that it generates a laser scanning beam in parallel that is different from the beam scanning in the conventional scanning laser Doppler vibrometer (SLDV). The new system has a board scanning range. The measurement target size ranges from few tens of millimeters down to 10 μm. We have demonstrated the capability of the novel system on scanning measurements of features as big as ultra-precision cutting tool to features as tiny as AFM cantilever. We believe that the novel SLDV will find profound potential applications in the precision engineering field.     

被动式遥感FTIR测量时的仪器响应函数校正

在应用红外发射光谱来获得某些红外源的绝对光谱能量数据,如辐射源光谱辐射通量密度、辐射源光谱辐射强度、辐射源光谱辐射亮度及光谱辐射照度等时,需要得知不同条件下的仪器响应函数。文章对被动式遥感FTIR测量时的仪器响应函数进行了校正,实验结果表明：在不同的实验条件下,仪器响应函数的变化规律是不同的,它不仅和校正时所采用的绝对黑体温度有关,而且和校正中仪器接收到的信号大小有直接关系。因此,在被动式测量时,要密切注意发射源温度以及发射源发射信号大小,以便获得最佳仪器响应函数校正结果。     

Free vibrations of circular cylindrical shells

The finite element method is used to predict the dynamic behaviour of circular cylindrical shells in free vibrations. A suitable shape function for the circumferential displacement distribution has been proposed. This reduces the three-dimensional character of the problem to a two-dimensional one. The simultaneous iteration method to determine the eigen-frequencies and eigenvectors is utilised for solving the eigenvalue problem. The accuracy of the method has been checked by verifying the results of known cases. Finally an experimental shell structure containing elastic rings welded at the ends has also been analysed and the experimental results compared with the theoretical ones.     

基于傅里叶光学原理的新型凹面光栅衍射效率测量方法

凹面衍射光栅兼具色散分光与光束聚焦功能,同时具有像差校正、低杂散光、无鬼线和高信噪比等优势而受到光谱仪器领域的广泛关注。衍射效率作为凹面光栅最重要的技术指标之一,其测量技术水平逐渐成为光谱仪器行业最为关注的课题之一。传统方法一般采用双单色仪结构实现凹面光栅衍射效率的测量,该方法主要存在两方面问题,一是测量标准反射镜和待测光栅的出射光谱带宽不同,二是光栅叠级、杂散光的影响;上述问题的存在降低了高性能凹面光栅衍射效率测量的准确性。本文提出了一种基于傅里叶光学原理测量凹面光栅衍射效率的新方法;针对该方法建立了凹面光栅衍射效率测量的数学模型,并采用光学追迹和傅里叶光学方法相结合对其进行了仿真分析,从而验证了该方法的正确性;针对动镜横移误差、倾斜误差、光源稳定性、动镜运动距离误差等因素影响凹面光栅衍射效率测量精度的问题,提出引入辅助探测器的方法来进一步提高衍射效率测量精度,并对有无辅助探测器情况下的上述误差对衍射效率的影响进行了数学推导和仿真分析,分析结果表明引入辅助探测器可以有效抑制了上述误差对凹面光栅衍射效率测量的影响。对比传统双单色仪测量方法而言,该方法不仅能够解决传统测量方法存在的问题,同时还具有多波长同时测量、高光通量、高分辨率、高波数精度等优势,可以有效提高凹面光栅衍射效率的测量精度和测量效率。     

On the causes of negative source impedance in the measurement of intake and exhaust noise sources

In order to evaluate the acoustic field within a duct system some knowledge is required about the acoustic source, which is characterized by frequency-dependent values of both strength and impedance. However, in using various experimental techniques for various types of source to obtain these values, negative real parts of the source impedance have been measured. Negative source resistance is physically implausible. In some instances, one measurement method gives positive values of source resistance where another gives negative values. This paper reviews the possible causes of the problem, with reference to experimental and theoretical results, in an attempt to clarify the issue. Various possible origins of a negative source resistance have been investigated. It is noted that, for the time being, the violation of the assumption of a time-invariant source and the defect in the inherent algorithm of the load method are the most probable origins of the negative source resistance.     

Ultrasonic measurement of anisotropy and temperature dependence of elastic parameters by a dry coupling method applied to a 6061-T6 alloy

A pulse-echo ultrasonic method is presented to measure elastic parameter variations during thermal loading with high accuracy. Using a dry coupling configuration dedicated to high temperature investigation, this technique has been applied on 6061-T6 aluminium samples up to 220 °C. Experimental settings are described to assess the measurement reproducibility estimated at a value of 0.2%. Consequently, the anisotropy of this aluminium between the rolling direction and two orthogonal axes has been clearly detected and also measured versus temperature. As regards the temperature dependence of these elastic parameters, these results are compared with the estimations of the Young’s modulus obtained during mechanical tests in conditions of low cycle fatigue (LCF). The same linear variation versus temperature is found but with a shift of 7 GPa. This difference has been classically attributed to systematic experimental error sources and to the distinction existing between dynamic and static elastic modulus.     

A new method to eliminate the influence of the backward defect infection and the position-dependent of the coefficient on distributed Brillouin fiber sensor

Two theoretical problems associated with the measurement of temperature or strain from the normalized power of Brillouin signal in a distributed fiber sensor are studied. One problem is the position-dependent of the coefficient relating the Brillouin power to the local temperature or strain. The other problem is the backward infection of the defect (local temperature or strain change). These two problems will degrade the measurement accuracy of a distributed Brillouin fiber sensor by changing the distribution of pump power. To eliminate these two problems, new reference functions are proposed to normalize the Brillouin signal. Simulation results by using fourth-order Runge-Kutta algorithm show that these new reference functions can eliminate the influence of these two problems on distributed Brillouin fiber sensor.     

金属光学性质对高精度丝径测量中偏振效应的影响

本文主要研究金属细丝的光学性质对高精度丝径测量中偏振效应的影响,由振动平行和垂直于细丝轴线的偏振光的夫琅和费衍射图样得到的丝径值不相同,理论分析表明:这种丝径的差值与金属复数折射率的虚部近似成正比关系增大,而与它的实部无关,一些实验结果与理论分析符合得很好。     

三个简谐振动合成的拍现象和实验仪

在三个简谐振动合成的拍现象进行理论分析基础上,提出了一种能够准确演示三个简谐振动拍现象的实验仪器,对进行的演示和计算机仿真比较,所给结果正确,并比传统演示手段更加直观,演示内容更加丰富.     

基于合肥先进光源的准直参考网络机械系统设计及其仿真分析

新一代粒子加速器中磁铁位置与姿态的准确测量和安装依赖于各项技术的综合运用。实现磁铁在全局坐标系中准确定位,并且快速精密安装测量,为了建造高亮度、低发射度的第四代同步辐射光源,国家同步辐射实验室开展了“合肥先进光源（HALF）”的预研工作。作为准直测量系统的重要研究内容,创新性地提出了准直参考网络方法。为了保证准直测量精度,对准直参考网络的机械系统本身的形变要求很高,通过ANSYS软件对机械系统整机进行了静力学仿真,根据分析结果对准直基准板进行了优化设计,使其满足工作条件要求。     

Infrared thermography applied to the resolution of inverse heat conduction problems: recovery of heat line sources and boundary conditions

In this paper we present an application of infrared thermography for inverse heat conduction problems resolution. The approach described in the paper is based on a Boundary Element Method formulation of the transient heat diffusion equation. The inverse problems under investigation concern the time and space reconstruction of unknown boundary conditions or heat line source strength. As there is a lack of information in the system, some additional measurements are necessary to solve the problem. In the examples proposed in this paper the extra information is provided by an infrared scanner. The measurements contained in the infrared pictures are used in the model as a Dirichlet boundary condition or as a special boundary condition prescribing both temperature and heat flux density on the scanned boundary. We present some experimental results concerning line source strength identification and the reconstruction of unknown heat fluxes applied on an out of reach boundary. All the examples presented in this paper are related to 2D transient diffusion. As the inverse problem is ill-posed, time and space regularization techniques are used to stabilize the solution and reduce the sensitivity of the latter to measurement errors.     

On the nonlinear dynamics of a single degree of freedom oscillator with a time-varying mass

In this paper the forced vibrations of an undamped single degree of freedom oscillator with a time varying mass will be studied. An initial value problem for an oscillator equation with a Rayleigh type of nonlinearity will be formulated, and by applying a straight-forward perturbation method the problem will be solved approximately. The approximations of the solutions will be used to construct a map. By using this map the stability properties of the solutions can be determined. The stability properties of the nonlinear problem will be compared to those for the linear problem, which have been studied earlier in the literature. The instability regions in the parameter space and some phase-space figures for the nonlinear problem will be computed numerically. It will also be shown how the behaviour of the solutions changes when the instability regions in the parameter space are crossed.