Synthesis and characterization of fluorinated poly(imide siloxane) block copolymers

Five new block copoly(imide siloxane)s have been prepared by reacting two different diamines, 4,4″-bis(p-aminophenoxy)-3,3″-trifluoromethyl terphenyl (APTTFT) and amino-propyl terminated polydimethylsiloxane (APPS), separately with 4,4′-(4,4′-isopropylidenediphenoxy)bis(phthalic anhydride); BPADA. The reactions were conducted by a two pot solution imidization technique. The diamine APTTFT and the dianhydride BPADA composed the hard block segment while APPS and BPADA composed the soft block segment. The soft and hard blocks of different block lengths were generated by different stoichiometric imbalance in two different flasks and the final polymers were obtained by reacting both the blocks together. Different block copoly(imide siloxane)s were prepared on increasing the hard block lengths (DP) from 7 to 12, 18, 23 and 28 and the soft block lengths (DP) from 4 to 6, 8, 10 and 12, respectively. The resulting polymers have been well characterized by NMR, DSC and DMA techniques. The properties of the block copolymers were compared with the analogous random copolymers and homopolyimide prepared without APPS.     

Poly(N,N-dimethylaminoethyl methacrylate) grafted poly(vinyl chloride)s synthesized via ATRP process and their membranes for dye separation

To functionalize poly(vinyl chloride)(PVC) for various applications, monomers containing tertiary amine group are incorporated into PVC via atom transfer radical polymerization(ATRP) initiated by the labile chlorines in their backbones. The kinetics of synthesis was carefully investigated, and it is proven that the grafting polymerization process can be effectively controlled by regulating the reaction time. The membranes are fabricated using PVC and copolymers by non-solvent induced phase separation(NIPS) process. The hydrophilicity and pore structure of copolymer membranes were enhanced as well, these membranes are endowed with positive charge. When PDMA%(i.e., the PDMA weight percentage in copolymer) is 31.1%, the flux and Victoria blue B rejection are 26.0 L?m?2?h?1(0.5 MPa) and 91.2%, respectively. Thus, the newly synthesized polymer is proven to be a promising material for dye separation with positive charges.     

Implantation of multiscale silk fibers on poly (lactic acid) fibrous membrane for biomedical applications

Despite that poly (lactic acid) (PLA) has satisfactory biodegradation in vivo, its application in biomedicine is restricted due to its unsatisfactory cytocompatibility. Silk fiber (SF) has outstanding biocompatibility and silk fibroin protein obtained from silk by degumming has good hydrophilicity. Therefore, combining the PLA and silk can improve hydrophilicity of PLA to apply as biomedical materials. In this study, different concentrations of sodium hypochlorite (NaClO) were used to separate the silk to obtain multiscale silk fibers (MSFs), which were implanted into the PLA electrospun fibrous membranes (EFMs). The morphology and structure of silk fibers separated by different concentrations of NaClO were studied by Zetasizer Nano ZS, UV spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. Moreover, the biocompatibility of the surface-modified PLA composite membranes by MSFs was investigated by cell cultivation and proliferation. The results showed that the surface-modified PLA EFMs through MSF bundles obtained from NaClO split silk exhibited a certain improvement on PLA hydrophilicity and enhancement on cellular compatibility, which could have a broad prospect in the practical application of biomedical materials.     

Lipid,protein and poly(NIPAM) coated mesoporous silica nanoparticles for biomedical applications

In the past decade, mesoporous silica nanoparticles (MSNs) as nanocarriers have showed much potential in advanced nanomaterials due to their large surface area and pore volume. Especially, more and more MSNs based nanodevices have been designed as efficient drug delivery systems (DDSs) or biosensors. In this paper, lipid, protein and poly(NIPAM) coated MSNs are reviewed from the preparation, properties and their potential application. We also introduce the preparative methods including physical adsorption, covalent binding and self-assembly on the MSNs' surfaces. Furthermore, the interaction between the aimed cells and these molecular modified MSNs is discussed. We also demonstrate their typical applications, such as photodynamic therapy, bioimaging, controlled release and selective recognition in biomedical field.     

Blood compatibility of surface-engineered poly(ethylene terephthalate) via o-carboxymethylchitosan

Poly(ethylene terephthalate) (PET) films were treated by argon plasma following by graft copolymerization with acrylic acid (AAc). The obtained PET-surface grafted PAA (PET-g-PAA) was coupled with chitosan (CS) and o-carboxymethylchitosan (OCMCS) molecules, respectively. Their surface physicochemical properties were characterized by X-ray photoelectron spectroscopy (XPS), water contact angle and streaming potential measurements. The PET-g-PAA surface containing carboxylic acid, CS immobilized PET surface containing amino and OCMCS immobilized PET surface containing both carboxylic acid and amino groups, make the PET surface exhibited a hydrophilic character. The blood compatibility was evaluated by platelet contacting experiments and protein adsorption experiments in vitro. The results demonstrate that the PET surface coupling OCMCS shows much less platelet adhesive and fibrinogen adsorption compared to the other surface modified PET films. The anticoagulation of PET-OCMCS is ascribed to the suitable balance of hydrophobicity/hydrophilicity, surface zeta potential and the low adsorption of protein.     

Reactions of poly(hexafluoropropylene oxide) perfluoroisopropyl ketone with various amines

The reaction of poly(hexafluoropropylene oxide) perfluoroisopropyl ketone, perfluoroethyl perfluoroisopropyl, or bis-perfluoroisopropyl ketone with various amines has been studied and the products identified. A comparison of the reactivity of the ketones with different amines is made and identified by mass spectroscopy. The reaction of diethyl amine with all three ketones leads to two unexpected products and the mechanism of their formation is considered.     

Blood substitutes and other potential biomedical applications of fluorinated colloids

An oxygen carrying, heat-sterilized phospholipid-based emulsion of a fast excreted lipophilic fluorocarbon, perfluorooctyl bromide (perflubron), stabilized against molecular diffusion, has been developed to serve as a temporary blood substitute. It is expected to reduce exposure to donor blood and thereby help mitigate the pressure on our blood supply. A phase III clinical trial in Europe has demonstrated that use of the emulsion resulted in avoidance and reduction of donor blood transfusion in surgery patients. Further potential applications for fluorocarbon emulsions include use as a bridge to transfusion, treatment of myocardial ischemia and stroke, potentiation of radio and chemotherapy and preservation of organs destined for transplantation. Echogenic, injectable gaseous microbubbles, osmotically stabilized by perfluorohexane, provide an effective contrast agent for ultrasound imaging. Clinical trials have established improved imaging of the walls of the heart and, hence, assessment of cardiac function. The ability of improving detection of myocardial perfusion, blood flow abnormalities and solid tumors is also being investigated. Various families of fluorinated amphiphiles with modular molecular structures and polar heads derived from natural products have been synthesized. Due to their highly hydrophobic perfluoroalkylated tail chains, these amphiphiles readily self-assemble into stable fluorinated vesicles, tubules and other organized molecular systems with distinctive properties. Fluorosurfactants also allowed preparation of direct, reverse, apolar and multiple emulsions and gels. These fluorinated colloids have potential for the delivery of drugs and other bioactive materials, and provide unique tools in biomedical research.     

Biofouling-resistance expanded poly(tetrafluoroethylene) membrane with a hydrogel-like layer of surface-immobilized poly(ethylene glycol) methacrylate for human plasma protein repulsions

In general, it is a challenge to control the highly polar material grafting from the chemically inert Teflon-based membrane surface. This work describes the surface modification and characterization of expanded poly(tetrafluoroethylene) (ePTFE) membranes grafted with poly(ethylene glycol) methacrylate (PEGMA) macromonomer via surface-activated plasma treatment and thermally induced graft copolymerization. The chemical composition and microstructure of the surface-modified ePTFE membranes were characterized by Fourier transform infrared spectroscopy (FT-IR), contact angle, and bio-atomic force microscopy (bio-AFM) measurements. Biofouling property of the modified membranes was evaluated by the measurements of the plasma protein (γ-globulin, fibrinogen, or albumin) adsorption determined using an enzyme-linked immunosorbent assay (ELISA). In general, the hydrophilicity of the surface of ePTFE membranes increases with increasing the grafting degree of the copolymerized PEGMA. The highly hydrated PEGMA chain on the resulting ePTFE membranes was found to form a surface hydrogel-like layer with regulated coverage in aqueous state, which can be controlled by the content of PEGMA macromonomer in the reaction solution. The relative protein adsorption was effectively reduced with increasing capacity of the hydration for the PEGMA chain grafted on the ePTFE membrane surface. From both results of protein adsorption and platelet adhesion test in vitro, it is concluded that the PEGMA-grafted hydrophilic ePTFE membranes could provide good biofouling resistance to substantially reduce plasma protein and blood platelet fouling on the membrane surface in human body temperature.     

Formation of porous poly(vinylidene fluoride) membranes with symmetric or asymmetric morphology by immersion precipitation in the water/TEP/PVDF system

The phase equilibrium boundaries of the membrane forming system, water/triethyl phosphate (TEP)/PVDF, at 25 °C were determined experimentally using cloud-point and equilibrium absorption methods. Based on the phase diagram, appropriate dope and bath compositions were selected to prepare microporous membranes by means of the isothermal immersion-precipitation technique. As a metastable casting dope with respect to crystallization was adopted, the formed membranes exhibited a uniform cross-section composed of interlocked crystal elements coexisting with the network of continuous pores, as was revealed by high resolution FESEM imaging. Morphologies of the membranes’ top surfaces were found to depend heavily on the bath strength, which was controlled by the TEP content. By changing the bath gradually from pure water to 70% TEP, the top surface evolved from a dense skin (asymmetric membrane) to a totally porous morphology (symmetric membrane). Wide angle X-ray diffraction analysis indicated that PVDF crystallized into α-type structure for all of the synthesized membranes. The crystallinity as determined from diffraction peak deconvolution was ≈65%, which value was confirmed by Differential Scanning Calorimetry (DSC). The obtained thermograms also showed a similar melting peak temperature (T_m ≈ 169 °C) for all membranes. Furthermore, water fluxes and tensile strengths of the membranes were measured. The results were found to correlate with the morphologies of the membranes.     

Pervaporation of alcohol-toluene mixtures through polymer blend membranes of poly(acrylic acid) and poly(vinyl alcohol)

Homogeneous membranes were prepared by blending poly(acrylic acid) with poly(vinyl alcohol). These blend membranes were evaluated for the selective separation of alcohols from toluene by pervaporation. The flux and selectivity of the membranes were determined both as a function of the blend composition and of the feed mixture composition. The results showed that a polymer blending method could be very useful to develop new membranes with improved permselectivity. The pervaporation properties could be optimized by adjusting the blend composition. All the blend membranes tested showed a decrease in flux with increasing poly(vinyl alcohol) content for both methanol—toluene and ethanol—toluene liquid mixtures. The alcohols permeated preferentially through all tested blend membranes, and the selectivity values increased with increasing poly(vinyl alcohol) content. The pervaporation characteristics of the blend membranes were also strongly influenced by the feed mixture composition. The fluxes increased exponentially with increasing alcohol concentration in the feed mixtures, whereas the selectivities decreased for both liquid mixtures.     

Effect of poly(vinyl acetate) (PVAc) on thermal behavior and mechanical properties of poly(3-hydroxybutyrate)/poly(propylene carbonate) (PHB/PPC) blends

To assess the compatibility of blends of synthetic poly(propylene carbonate) (PPC), with a natural bacterial poly(3-hydroxybutyrate) (PHB), a simple casting procedure of blend was used. poly(3-hydroxybutyrate)/poly(propylene carbonate) blends are found to be incompatible according to DSC and DMA analysis. In order to improve the compatibility and mechanical properties of PHB/PPC blends, poly(vinyl acetate) (PVAc) was added as a compatibilizer. The effects of PVAc on the thermal behavior, morphology, and mechanical properties of 70PHB/30PPC blend were investigated. The results show that the melting point and the crystallization temperature of PHB in blends decrease with the increase of PVAc content in blends, the loss factor changes from two separate peaks of 70PHB/30PPC blend to one peak of 70PHB/30PPC/12PVAc blend. It is also found that adding PVAc into 70PHB/30PPC blend can decrease the size of dispersed phase from morphology analysis. The result of tensile properties shows that PVAc can increase the tensile strength and Young’s modulus of 70PHB/30PPC blend, and both the elongation at break and the tensile toughness increase significantly with PVAc added into 70PHB/30PPC.     

Novel fluorinated poly(aryl ether)s derived from 1,2-bis(4-(4-fluorobenzoyl)phenoxy)-hexafluorocyclobutane

Two novel poly(aryl ether)s were prepared from 1,2-bis(4-(4-fluorobenzoyl)-phenoxy)-hexafluorocyclobutane and aromatic bisphenols by the aromatic nucleophilic substitution reaction in a polar aprotic solvent. These polymers have good thermal stability up to 341 °C with 10% weight loss in inert atmosphere and good solubility in common organic solvents such as THF, DMAc, DMF and DMSO.     

Thermal degradation of poly(vinylpyridine)s

The thermal stability and the temperature at which maximum degradation yields are detected were quite similar for both poly(2-vinylpyridine) (P2VP) and poly(4-vinylpyridine) (P4VP). However, considerable differences among the thermal degradation products of both polymers were detected indicating a correlation between the polymer structure and the degradation mechanism. Direct pyrolysis mass spectrometry analyses revealed that P2VP degrades via a complex degradation mechanism, yielding mainly pyridine, monomer, and protonated oligomers, whereas depolymerization of P4VP takes place in accordance with the general thermal behaviour of vinyl polymers. The complex thermal degradation behaviour for P2VP is associated with the position of the nitrogen atom in the pyridine ring, with σ-effect.     

Copolymer of poly(4-vinylpyridine)-g-poly(ethylene oxide) respond sharply to temperature, pH and ionic strength

The stimuli-responsive copolymers with poly(ethylene oxide) (PEO) as side chain were prepared by free-radical copolymerization of methacrylamide end-capped PEO macromonomer and 4-vinylpyridine (4VP). Phase transition behavior of these copolymers of poly(4-vinylpyridine)-g-poly(ethylene oxide) (P4VP-g-PEO) was investigated as a function of polymer concentration, temperature, pH and ionic strength by monitoring the turbidity of the polymer solutions. The copolymers displayed sharp response to temperature and pH. The LCST of P4VP-g-PEO copolymer increased with the increase of PEO content and decreased with increasing pH due to the deprotonation of the pyridine ring, indicating well-tunable LCST. In addition, the LCST of P4VP-g-PEO9 presented a unique phase transition behavior with varying salt concentration, showing a minimum with 1 M NaCl solution at pH 6.0.     

Assembly of poly(dopamine)/poly(acrylamide) mixed coatings by a single‐step surface modification strategy and its application to the separation of proteins using capillary electrophoresis

In this work, a facile approach was developed to modify a fused‐silica capillary inner surface based on poly(dopamine) and poly(acrylamide) mixed coatings for protein separation by capillary electrophoresis. The surface morphology, thickness, and chemical components of poly(dopamine)/poly(acrylamide) mixed coatings on glass slides and silicon wafers were studied by atom force microscopy, ellipsometry, and X‐ray photoelectron spectroscopy, respectively. The hydrophilicity and stability of the mixed coatings on glass slides were investigated by static water contact angle measurements. A comparative study of electroosmotic flow showed that the poly(dopamine)/poly(acrylamide) mixed coatings could provide effective suppression of electroosmotic flow. Meanwhile, the fast and efficient separations of the mixture of four alkaline proteins, the mixture of acidic, basic, and neutral proteins and egg white proteins were obtained by capillary electrophoresis. Furthermore, the consecutive protein separation runs and low RSDs of migration time demonstrated that these poly(dopamine)/poly(acrylamide) mixed coatings were capable of minimizing protein adsorption during the protein separation by using capillary electrophoresis.     

The role of water in structural changes of poly(N-isopropylacrylamide) and poly(N-isopropylmethacrylamide) studied by FTIR, Raman spectroscopy and quantum chemical calculations

Temperature-induced phase transition in water solutions of poly(N-isopropylacrylamide) (PNIPAM) and poly(N-isopropylmethacrylamide) (PNIPMAM) have been studied by ATR FTIR and Raman spectroscopy in combination with quantum chemical calculations. The presence or absence of the α-methyl group has a strong effect on the physical structure of water solutions. Although the hydrophobic interactions for PNIPMAM and PNIPAM are very similar, PNIPMAM with additional methyl group exhibits significantly weaker intermolecular interactions between the amide groups. That effect is the cause of the higher transition temperature T_t by about 8 °C for PNIPMAM compared to PNIPAM due to the formation of larger compact structures. The presence of the methyl group is significant for the reversibility of the temperature transition during the backward cooling as the dissolution of more stable compact PNIPMAM requires overcoming of a higher energy barrier and shows a strong hysteresis.     

Effect of mixed solvent on solution properties and gelation behavior of poly(vinyl alcohol)

In this work, the static and dynamic light scattering measurements were used to investigate the solution properties and the aging effects on PVA/DMSO/water ternary system in dilute region at 25 °C. It was found that the phase separation and aggregate behavior occurs rapidly and obviously when DMSO mole fraction (X₁) in the solvent mixture is between 0.2 and 0.33, especially at 0.25. In this solvent composition range, a broad peak which indicates phase separation and chain aggregation can be observed from static light scattering measurement. However, when DMSO mole fraction is increased to 0.37, no such peak is present. For this ternary system, the gelation mechanism and the relationship between the phase separation behavior and the gelation of the formed physical gels were also investigated through the gelation kinetic analyses in the dilute and semi-dilute region. It is concluded that the cononsolvency effect in the dilute solution is not the sole origin that affects the phase separation, aggregation, and gelation behavior for the ternary system in a higher polymer concentration range. The hydrodynamic factors such as the higher viscosity and slower polymer chain diffusion that are resulted from higher polymer concentration should be also considered.     

Chemical and Mechanical Characterization of Licorice Root and Palm Leaf Waste Incorporated into Poly(urethane-acrylate) (PUA)

A poly(urethane-acrylate) polymer (PUA) was synthesized, and a sufficiently high molecular weight starting from urethane-acrylate oligomer (UAO) was obtained. PUA was then loaded with two types of powdered ligno-cellulosic waste, namely from licorice root and palm leaf, in amounts of 1, 5 and 10%, and the obtained composites were chemically and mechanically characterized. FTIR analysis of final PUA synthesized used for the composite production confirmed the new bonds formed during the polymerization process. The degradation temperatures of the two types of waste used were in line with what observed in most common natural fibers with an onset at 270 °C for licorice waste, and at 290 °C for palm leaf one. The former was more abundant in cellulose (44% vs. 12% lignin), whilst the latter was richer in lignin (30% vs. 26% cellulose). In the composites, only a limited reduction of degradation temperature was observed for palm leaf waste addition and some dispersion issues are observed for licorice root, leading to fluctuating results. Tensile performance of the composites indicates some reduction with respect to the pure polymer in terms of tensile strength, though stabilizing between data with 5 and 10% filler. In contrast, Shore A hardness of both composites slightly increases with higher filler content, while in stiffness-driven applications licorice-based composites showed potential due to an increase up to 50% compared to neat PUA. In general terms, the fracture surfaces tend to become rougher with filler introduction, which indicates the need for optimizing interfacial adhesion.     

Physically crosslinked poly(vinyl alcohol)-hydroxyethyl starch blend hydrogel membranes: Synthesis and characterization for biomedical applications

Poly(vinyl alcohol), PVA is a polymer of great importance because of its many appealing characteristics specifically for various pharmaceutical and biomedical applications. Physically crosslinked hydrogel membranes composed of different amounts of hydroxyethyl starch (HES) in (PVA) and ampicillin were prepared by applying freeze–thawing method. This freezing–thawing cycle was repeated for three consecutive cycles. Physicochemical properties of PVA–HES membrane gel such as gel fraction, swelling, morphology, elongation, tensile strength, and protein adsorption were investigated. Introducing HES into freeze–thawed PVA structure affected crystal size distribution of PVA; and hence physicochemical properties and morphological structure have been affected. Increased HES concentration decreased the gel fraction %, maximum strength and break elongation. Indeed it resulted into a significant incrementing of the swelling ability, amount of protein adsorption, broader pore size, and pore distribution of membrane morphological structure. Furthermore, an increase in HES concentration resulted in better and still lower thermal stability compared to virgin PVA and freeze–thawed PVA. The maximum weight loss of PVA–HES hydrogel membranes ranged between 18% and 60% according to HES content, after two days of degradation in phosphate buffer saline (PBS), which indicates they are biodegradable. Thus, PVA–HES hydrogel membranes containing ampicillin could be a novel approach for biomedical application e.g. wound dressing purposes.     

Photocrosslinkable polyesters and poly(ester anhydride)s for biomedical applications

Crosslinking is a feasible way to prepare biodegradable polymers with potential in biomedical applications such as controlled release of active agents and tissue engineering. A synthesis route in which functional telechelic aliphatic polyester oligomers are used as precursors for the preparation of crosslinked polyesters and poly(ester anhydride)s is described. Mechanical properties, degradation characteristics and rate, and bioactivity can be modified widely by controlling the chemical composition and architecture of the crosslinkable oligomers. In tissue engineering, photocrosslinking allows to use crosslinkable oligomers in advanced manufacturing techniques like micromolding in capillaries, stereolithography and two-photon polymerization.