Synthesis and evaluation of bipendant-armed (oligo)thiophene crown ether derivatives as new chemical sensors

Three new (oligo)thiophene bipendant-armed ligands 2a-c, derived from 2-(aminomethyl)-15-crown-5, have been synthesized and characterized. Compounds 2a-c were prepared by reductive amination of the corresponding macrocycle with formyl thiophene derivatives 1a-c in the presence of NaBH(OAc)₃ in fair to good yields. The photophysical properties of ligands 2a-c were studied and they were also evaluated as chemosensors in the presence of Na(I), Ag(I), Pd(II) and Hg(II) cations in acetonitrile solution.     

The regioselectivity of the formation of 2-pyrazolylthiazoles and their precursors from the reaction of 2-hydrazinothiazoles with 4,4,4-trifluoro-1-hetaryl-1,3-butanediones

Reaction of 2-hydrazinothiazoles 1 with 1-thienyl- and 1-furyl-1,3-butanediones 2a,b in methanol in the presence of hydrochloric acid mainly leads to a mixture of pyrazoles 3 and pyrazolines 4 or pyrazoles 3 and 5 in strong acidic conditions. Isomeric hydrazones 6 and pyrazolines 4 were formed and isolated in these reactions in the absence of hydrochloric acid. It has been shown that the regioselectivity in the reaction of diketones 2 with hydrazine 1 is governed by both the concentration of acid and the nature of substituents in the 1,3-diketones 2. Cyclization of hydrazones 6 is shown to occur under milder conditions than dehydration for pyrazolines 4. The new heterocyclic compounds were prepared and fully characterized by NMR spectra and by X-ray analysis for 3c.     

Reactions of azulenes with 1,2-diaryl-1,2-ethanediols in methanol in the presence of hydrochloric acid: comparative studies on products, crystal structures, and spectroscopic and electrochemical properties

Although reaction of guaiazulene (1a) with 1,2-diphenyl-1,2-ethanediol (2a) in methanol in the presence of hydrochloric acid at 60 °C for 3 h under aerobic conditions gives no product, reaction of 1a with 1,2-bis(4-methoxyphenyl)-1,2-ethanediol (2b) under the same reaction conditions as 2a gives a new ethylene derivative, 2-(3-guaiazulenyl)-1,1-bis(4-methoxyphenyl)ethylene (3), in 97% yield. Similarly, reaction of methyl azulene-1-carboxylate (1b) with 2b under the same reaction conditions as 1a gives no product; however, reactions of 1-chloroazulene (1c) and the parent azulene (1d) with 2b under the same reaction conditions as 1a give 2-[3-(1-chloroazulenyl)]-1,1-bis(4-methoxyphenyl)ethylene (4) (81% yield) and 2-azulenyl-1,1-bis(4-methoxyphenyl)ethylene (5) (15% yield), respectively. Along with the above reactions, reactions of 1a with 1,2-bis(4-hydroxyphenyl)-1,2-ethanediol (2c) and 1-[4-(dimethylamino)phenyl]-2-phenyl-1,2-ethanediol (2d) under the same reaction conditions as 2b give 2-(3-guaiazulenyl)-1,1-bis(4-hydroxyphenyl)ethylene (6) (73% yield) and (Z)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)-1-phenylethylene (7) (17% yield), respectively. Comparative studies of the above reaction products and their yields, crystal structures, spectroscopic and electrochemical properties are reported and, further, a plausible reaction pathway for the formation of the products 3-7 is described.     

Osmium assisted C-H activation and CN cleavage of N-(2′-hydroxyphenyl) benzaldimines. Synthesis, structure and electrochemical properties of some organoosmium complexes

Reaction of N-(2′-hydroxyphenyl)-4-R-benzaldimines (L-R, R = OCH₃, CH₃, H, Cl and NO₂) with [Os(PPh₃)₃Br₂] in refluxing 2-methoxyethanol in the presence of triethylamine affords two families of organoosmium complexes (1-R and 2-R). In both 1-R and 2-R complexes a benzaldimine ligand is coordinated to the metal center as tridentate C,N,O-donor. In the 1-R complexes, a bidentate N,O-donor imionsemiquinonate ligand, derived from the hydrolysis of another benzaldimine, and a PPh₃ ligand are also coordinated to osmium. In the 2-R complexes, a carbonyl, derived from decarbonylation of 4-R-benzaldehyde (derived from the same hydrolysis stated above), and two PPh₃ ligands take up the remaining coordination sites on osmium. Structures of the 1-Cl and 2-OCH₃ complexes have been determined by X-ray crystallography. All the 1-R and 2-R complexes are diamagnetic, and show characteristic ¹H NMR signals and intense MLCT transitions in the visible region. Cyclic voltammetry on the 1-R complexes shows a reversible Os(III)-Os(IV) oxidation within 0.47-0.67 V (vs SCE), followed by an irreversible oxidation of the imionsemiquinonate ligand within 1.10-1.36 V. An irreversible Os(III)-Os(II) reduction is also displayed by the 1-R complexes within −1.02 to −1.14 V. Cyclic voltammetry on the 2-R complexes shows a reversible Os(II)-Os(III) oxidation within 0.29-0.51 V, followed by a quasi-reversible oxidation within 1.04-1.29 V, and an irreversible reduction of the coordinated benzaldimine ligand within −1.16 to −1.31 V.     

Syntheses of methylene-bridged ansa-zirconocene complexes and copolymerization studies of ethylene and norbornene

Methylene-bridged ansa-metallocene complexes bearing substituents on the cyclopentadienyl (Cp) and fluorenyl (Flu) moieties, namely methylene[9-(2,7-di-tert-butyl)fluorenyl(2-(1,3-dimethylcyclopentadienyl))]zirconium dichloride (1a) and its analogue, methylene[(9-(2,7-di-tert-butyl)fluorenyl(2-(1-methyl-3-phenyl)cyclopentadienyl))]zirconium dichloride (2a), have been prepared from (2,7-di-tert-butyl)-9-prop-2-ynyl-9H-fluorene (2). This procedure includes the use of 3-bromo-1-propyne which affords the methylene bridging unit by way of an intermolecular Pauson-Khand reaction in which norbornadiene and a pendant alkyne cyclize to form a ring that later becomes a substituted cyclopentadienyl group. Ethylene-norbornene (E-N) copolymerization was then carried out using these new complexes (1a and 1b) in the presence of methylaluminoxane (MAO) as a cocatalyst; these activities can be compared to that of isopropylene[9-fluorenyl-cyclopentadienyl]zirconium dichloride (3a). The activity of catalyst 1a was comparable to that of 3a but much higher than that of 2a. In addition, 1a shows higher norbornene insertion performance, and gives an E-N copolymer with a higher glass transition temperature (T_g) than 2a under identical conditions; both 1a and 2a give a lower T_g polymer than 3a does.     

Synthesis of pyridine and 2,2′-bipyridine derivatives from the aza Diels-Alder reaction of substituted 1,2,4-triazines

Amidrazone 1a and the tricarbonyl derivatives 2b-d reacted in boiling ethanol in the presence of 2,5-norbornadiene 5 giving the pyridine derivatives 6b-d respectively (59-72%) and in the presence of 2,3-dihydrofuran 7 yielding the lactones 10b-d (39-44%). The 2,2′-bipyridine derivatives 6e-g were similarly obtained in good yield (81-87%) from the reaction of amidrazone 1b and tricarbonyl derivatives 2b-d in the presence of 2,5-norbornadiene 5.     

Synthesis of polyfunctionalized furans from 3-acetyl-1-aryl-2-pentene-1,4-diones

The BF₃-catalyzed cyclization of 3-acetyl-1-aryl-2-pentene-1,4-diones 1a-e in the presence of water in boiling tetrahydrofuran gave bis(3-acetyl-5-aryl-2-furyl)methanes 2a-e in 26-79% yields along with a small amount of 3-acetyl-5-aryl-2-methylfurans 3a-e. The exact structure of 2a was determined by X-ray crystallography. The use of a half volume of the solvent for the reaction of 1a resulted in the formation of 2,4-bis(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-phenylfuran (4) together with 2a and 3a. A similar reaction of 1a was carried out in the presence of 3-acetyl-5-(4-methylphenyl)-2-methylfuran (3d) to afford 4-(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-(4-methylphenyl)-2-methylfuran (5) in 49% yield. The BF₃-catalyzed reaction of 1a with 2,4-pentanedione in dry tetrahydrofuran at 23°C gave 3-(3-acetyl-5-phenyl-2-furfuryl)-4-hydroxy-3-penten-2-one (6a) and 3-(3-acetyl-2-methyl-4-phenyl-5-furyl)-4-hydroxy-3-penten-2-one (7a) in 66 and 24% yields, respectively. The product distribution depended on the reaction temperature. A similar reaction of 1b-e also yielded the corresponding trisubstituted furans 6b-e and tetrasubstituted furans 7b-e in good yields. These results suggested the presence of the furfuryl carbocation intermediate A during the reaction. The one-pot synthesis of 6a and 7a was also achieved by a similar reaction using phenylglyoxal. The deoxygenation of 1a with triphenylphosphine gave 3a in 88% yield, while 1a was treated with concentrated hydrochloric acid to yield 3-acetyl-2-chloromethyl-5-phenylfuran (8) which was quantitatively transformed in ethanol into 3-acetyl-2-ethoxymethyl-5-phenylfuran (9) and in water into 3-acetyl-5-phenylfurfuryl alcohol (10), respectively. In addition, the Diels-Alder reaction of cyclopantadiene with 1a gave the corresponding [4+2] cycloaddition products 11 and 12.     

Copper-catalyzed dimerization of chromium Fischer carbene complexes: synthesis of dialkoxytrienes and their Nazarov-type cyclization to 2-alkoxy-2-cyclopentenones

Fischer carbene complexes 1 underwent a clean ligand dimerization reaction yielding functionalized olefins and trienes 4 in the presence of copper (I) catalysts. If treated with trifluoroacetic acid (TFA), trienes 4c, d, f undergo a cyclization process (Nazarov reaction) which furnishes cyclopentenone derivatives 6c, d, 7c, d and 8 in good yields. Finally, the Fischer aminocarbene 9 efficiently cyclodimerizes to the substituted arene 10 in the presence of CuBr.     

Cobalt complexes of terpyridine ligands: Crystal structure and nuclease activity

Cobalt(II) (1) and cobalt(III) (2) complexes of tridentate ligand, imidazole terpyridine (Itpy), have been synthesized and characterized by both spectroscopic and electrochemical techniques. Single crystal X-ray diffraction studies of complexes 1 and 2 shows that the complexes belong to monoclinic crystal system, with the two Itpy ligands coordinated to the central metal ion. The binding behavior of both the cobalt complexes to calf thymus DNA has been investigated by UV–Vis, fluorescence spectroscopy, viscosity and electrochemical measurements. The results suggest that complexes 1 and 2 bind to DNA through intercalation. The intrinsic DNA binding constant values obtained from absorption spectral titration studies were found to be (5.07 ± 0.12) × 10³ M⁻¹ and (7.46 ± 0.16) × 10³ M⁻¹, respectively, for complexes 1 and 2. Gel electrophoresis studies with the cobalt complexes show that while complex 1 cleaves DNA in the presence of hydrogen peroxide, complex 2 cleaves DNA in the presence of ascorbic acid and hydrogen peroxide.     

Synthesis and structural chemistry of bis(pyridylimino)isoindolato-ruthenium complexes and their activity as mediators in the atom transfer radical polymerization (ATRP) of styrene

The reaction of the Bispyridyl Isoindole (BPI) type ligands L1 and L2 (L1 = 1,3-Bis(2-(4-tert-butylpyridyl)imino) isoindole, L2 = 1,3-Bis(2-(5-bromo)imino)-5,6-dimethylisoindole) with [Ru(μ-Cl)₂(cod)]_x in presence of triethylamine using coordinating solvents like acetonitrile, dimethyl sulfoxide or pyridine cleanly gave the complexes [{BPI(L1,L2)}Ru^II(Cl)(S)₂] (L1: S = acetonitrile (1), dimethyl sulfoxide (2), pyridine (3); L2: S = acetonitrile (4), dimethyl sulfoxide (5), pyridine (6)). In these complexes the BPI ligands meridionally coordinated to the ruthenium center as established by X-ray diffraction for complexes 3 and 6. The catalytic activity in the direct ATRP (Atom Transfer Radical Polymerization) of styrene was tested for complexes 1-6.     

Imino Diels-Alder reaction of boronates. Preparation and characterization of new 3,4-dihydroquinoline and 1,2,3,6-tetrahydropyridine derivatives

The preparation of 3,4-dihydroquinolines (2a-d and 3a,b,d), as well as 1,2,3,6-tetrahydropyridines (4a-e) by imino Diels-Alder reaction of boronates (1a-e) with 2,3-dimethylbutadiene is reported. Boronates (1a-d) containing substituents meta and para relative to the imino fragment lead to diastereomeric mixtures of 4-methyl-4-ethenyl-3,4-dihydroquinolines (2, 3) and tetrahydropyridines (4). In contrast, the presence of an electron withdrawing substituent at the para position (1e), favors the iminodienophile behavior giving 4,5-dimethyl-1,2,3,6-tetrahydropyridine (4e) as the main product. The results show that boronates derived from Schiff bases are electron deficient species which can act either as dienophiles or dienes in the reaction with 2,3-dimethylbutadiene to give 3,4-dihydroquinolines and 1,2,3,6-tetrahydropyridines. All products were characterized by NMR and X-ray diffraction analysis of 2b, 2d, 3d and 4c allowed to assign the relative configuration of the newly formed stereogenic centers.     

The alicyclic ring contraction of perfluoro-1-phenyltetralin in reaction with antimony pentafluoride

Perfluoro-1-phenyltetralin (1) heated with antimony pentafluoride at 130 °C, then treated with water, gave a mixture of perfluorinated 3-methyl-2-phenylindenone (3), 3-methyl-2-phenylindene (4), 3-hydroxy-1-methyl-3-phenylindan (5), 1-methyl-3-phenylindan (6), 9-methyl-1,2,3,4,5,6,7,8-octahydroanthracene (7), and 1,9-dimethyl-5,6,7,8-tetrahydro-β-naphthindan (8). When heated with SbF₅ in the presence of HF, then treated with water, compound 1 is transformed to a mixture of products 3-6. The reaction at 170 and 200 °C forms compounds 3-6 together with perfluoro-2-(cyclohexen-1-yl)-3-methylindene (10).     

Hydrogelation and spontaneous fiber formation of 8-aza-7-deazaadenine nucleoside ‘click’ conjugates

Nucleoside hydrogels based on benzyl azide ‘click’ conjugates of 8-aza-7-deaza-2′-deoxyadenosine bearing 7-ethynyl, 7-octa-(1,7-diynyl), and 7-tri-prop-2-ynyl-amine side chains were synthesized (1, 3, 4). The cycloaddition adduct with the shortest linker (1) yields the most powerful hydrogelator forming stable gels at a concentration of 0.3 wt % of 1 in water. One molecule of 1 catches 7500 water molecules. Cycloaddition of the 8-aza-7-deaza-7-azido-2′-deoxyadenosine (9) and 3-phenyl-1-propyne (10) leads to the isomeric conjugate 2, with a C-N connectivity between the nucleobase and triazole moiety. This gel is less stable than that of the adduct 1. Both gels show a similar stability over a wide pH range (4.0-10.0). Xerogels of 1 and 2 studied by scanning electron microscopy (SEM) reveal that both click adducts (1 and 2) form long fibers spontaneously.     

Electrochemical synthesis of 1,3,4-thiadiazol-2-ylthio-substituted catechols in aqueous medium

Anodic oxidation of catechols 1a-e in the presence of 5-methyl-2-mercapto-1,3,4-thiadiazole 2 has been studied in acetate buffer solution by cyclic voltammetry and controlled-potential electrolysis techniques. The effects of various electrolytic conditions (amount of passed charge, anodic materials, pH of the electrolytic solution, applied potential, and concentration of substrates) on the yield have also been investigated. The results showed that the position of the initial substituent of the starting catechol derivatives dominated the formation of monothiadiazol-2-ylthio-substituted or/and dithiadiazol-2-ylthio-substituted products. For 4-substituted catechols 1a-b, monothiadiazol-2-ylthio-substituted products (3a-b) were exclusively produced in high to excellent yields. However, in the cases of catechol itself (1c) and 3-substituted catechols (1d-e), both monothiadiazol-2-yl-substituted (3c-e and 5d-e) and dithiadiazol-2-ylthio-substituted products (4c-e) were isolated. In addition, the nature of the initial substituent of the starting 3-substituted catechols (1d and 1e) affected the relative ratio of the two monothiadiazol-2-ylthio-substituted isomers (3d-e vs 5d-e).     

Facile synthesis of 4-phenylquinolin-2(1H)-one derivatives from N-acyl-o-aminobenzophenones

An efficient synthesis of 4-phenylquinolin-2(1H)-one derivatives has been achieved in a one-pot reaction from N-acyl-o-aminobenzophenones 1a-c (a: acyl=acetyl; b: acyl=propanoyl; c: acyl=heptanoyl) using NaH as a base. Treatment of 1 with NaH provided the quinolones 2a-c with 62-83% yields, whereas the reaction in the presence of alkyl iodide (alkyl=methyl, ethyl, n-octyl) gave the corresponding N-alkylated quinolones 3a-g in 75-95% yields. The alkylation reaction of 4-phenylquinolin-2(1H)-one 2a with alkyl halide gave a mixture of N-alkylated and O-alkylated products. Comparison of IR and NMR data of the N-alkylated and O-alkylated compounds with those of 2a-c indicated that 2a-c exist as the lactam form.     

Specific features of the reactions of quinazoline and its 4-hydroxy and 4-chloro substituted derivatives with C-nucleophiles

Reactions of quinazoline 1 with indole, pyrogallol and 1-phenyl-3-methylpyrazol-5-one in the presence of acid led to C-4 adducts 2, 3 and 5. Adduct 4 is formed by heating 1 with 1,3-dimethylbarbituric acid without acid catalysis. 1-Phenyl-3-methylpyrazol-5-one reacts with 1 without acid catalysis to form dipyrazolylmethane 6. 4-Chloroquinazoline 8 reacts with 1-phenyl-3-methylpyrazol-5-one to form 4-(1-phenyl-3-methyl-5-oxopyrazol-4-yl) quinazoline 9 and dipyrazolylmethane 6. Heating 8 with 2-methylindole leads to the formation of 4-(2-methylindol-3-yl) quinazoline 10 and tris(2-methylindol-3-yl)methane 11.     

Electrochemical synthesis of 5,6-dihydroxy-2-methyl-1-benzofuran-3-carboxylate derivatives

Electrochemical oxidation of catechols (1a-c) has been studied in the presence of methyl acetoacetate (2a) and ethyl acetoacetate (2b) as nucleophiles in aqueous solution using cyclic voltammetry and controlled-potential coulometry. The results indicate that the quinones derived from catechols (1a-c) participate in Michael addition reactions with 2a and 2b to form the corresponding benzofuran derivatives (3a-f). The electrochemical synthesis of 3a-f has been successfully performed in an undivided cell in good yield and purity. The oxidation mechanism was deduced from voltammetric data and by coulometry at controlled potential. The products have been characterized after purification by IR, ¹H NMR, ¹³C NMR, MS, and single crystal X-ray diffraction.     

2-(1-Isopropyl-2-benzimidazolyl)-6-(1-aryliminoethyl)pyridyl transition metal (Fe, Co, and Ni) dichlorides: Syntheses, characterizations and their catalytic behaviors toward ethylene reactivity

A series of 2-(1-isopropyl-2-benzimidazolyl)-6-(1-aryliminoethyl)pyridyl metal complexes [iron (II) (1a-6a), cobalt (II) (1b-6b) and nickel (II) (1c-6c)] were synthesized and fully characterized by elemental and spectroscopic analyses. Single-crystal X-ray diffraction analyses of five coordinated complexes 5a, 3b, 5b, 1c and 2c reveal 5a and 5b as distorted trigonal-bipyramidal geometry, and 3b, 1c and 2c as distorted square pyramidal geometry. All complexes performed ethylene reactivity with the assistance of various organoaluminums. The iron complexes displayed good activities in the presence of MAO and MMAO. Upon activated by Et₂AlCl, the cobalt analogues showed moderate ethylene reactivity, while the nickel analogues exhibited relatively higher activities.     

Preparation, characterization, and solution tailored photoluminescence of all trans poly[distyrylbenzene-b-(ethylene oxide)]s

Two linear, stereoregular, and structurally defined PPV derivatives (PPVs), poly[distyrylbenzene-b-(ethylene oxide)]s, with respective 12 and 16 of ethylene oxide repeat units in the backbone, abbreviated as DE-1 and DE-2 thereinafter, have been prepared via a modified synthetic profile. Both DE-1 and -2 were soluble in organic solvents and able to form robust and transparent film upon spin casting. Instrument characterization, such as FTIR, ¹H and ¹³C NMR, UV-vis and fluorescence spectroscopy, revealed the final structures as designed and novel photophysical properties in solution. Apparent spectral evidences strongly suggested the all trans conjugated DE-1 and -2 and the successful isomeirization process adopted. It was found that the aggregates were formed for both DE-1 and -2 at approximately 60% of methanol in methanol/dichloromethane (MeOH/DCM). Both DE-1 and -2 exhibited solution tailorable absorption and emission properties. Before aggregating point, the absorption profile experienced a blue shift with the increase of MeOH and a slight increase in quantum yields (QYs). At aggregating point, however, an apparent blue shift in emission profile was observed along with a remarkable decrease of QY due to aggregate quenching.     

Rh(II)-Catalyzed asymmetric carbene transfer with ethyl 3,3,3-trifluoro-2-diazopropionate

The asymmetric cyclopropanation of 1,1-diphenylethylene (2) with ethyl 3,3,3-trifluoro-2-diazopropionate (1) in the presence of chiral Rh(II) catalysts affords cyclopropane 3 with yields and enantioselectivities of up to 72 and 40%, respectively. Similar results are obtained for asymmetric cyclopropenation of hex-1-yne (4), although enantioselectivity is lower. The cyclopropanation of mono-substituted olefins (8a-8e) with 1 leads to cis/trans-mixtures of cyclopropanes 9a-9e with a maximum ee of 75% for 4-methoxystyrene (8c).