Characterization and release of triptolide-loaded poly (d,l-lactic acid) nanoparticles

Triptolide (TP), which has immunosuppressive effect, anti-neoplastic activity, anti-fertility function and severe toxicities on digestive, urogenital, blood circulatory system, was used as a model drug in this study. TP-loaded poly (d,l-lactic acid) (PLA) nanoparticles were prepared by the modified spontaneous emulsification solvent diffusion method (modified-SESD method). Dynamic light scattering system (DLS), transmission electron microscope (TEM), atomic force microscopy (AFM), differential scanning calorimetry (DSC), X-ray powder diffractometry and Fourier transform infra-red spectroscopy (FT-IR) were employed to characterize the nanoparticles fabricated for size and size distribution, surface morphology, the physical state of drug in nanoparticles, and the interaction between the drug and polymer. Encapsulation efficiency (EE) and the in vitro release of TP in nanoparticles were measured by the reverse phase high-performance liquid chromatography (RP-HPLC). The produced nanoparticles exhibited a narrow size distribution with a mean size of approximately 150 nm and polydispersity index of 0.088. The morphology of the nanoparticles exhibited a fine spherical shape with smooth surfaces without aggregation or adhesion. TP-entrapped in nanoparticles was found in the form of amorphous or semicrystalline. It was found that a weak interaction existed between the drug and polymer. In all experiments, more than 65% of EE were obtained. The in vitro release profile of TP from nanoparticles exhibited a typical biphasic release phenomenon, namely initial burst release and consequently sustained release. In this case, the particle size played an important role for the drug release. The modified-SESD method was a potential and advantage method to produce an ideal polymer nanoparticles for drug delivery system (DDS).     

Synthesis and Application of Chitosan‐g‐PLLA Copolymers

The purpose of this paper is to study the synthesis and application of a new type of chitosan‐g‐poly(L‐lactide) copolymer with different grafting percentage in the presence of triethylamine. FTIR and ¹H NMR results indicate that grafting percentage of graft copolymers increases with the molar feeding ratio of L‐lactide to chitosan. The measurement of XRD and TG shows that graft copolymer exhibits low crystallinity and thermal degradation temperature. Static water contact angle testing suggests that graft copolymer has superior hydrophilicity compared with PLLA, which can be very useful for biomedical applications. 5‐Fluorouracil loaded copolymer microspheres were prepared by phase separation method. The size and distribution of microspheres were measured by a Laser particle analyzer. The microspheres with LLA:CS feeding molar rotio (15∶1) have a mean diameter of 332 nm with a narrow unimodal distribution. The spherical microspheres were observed by transmission electron microscopy (TEM). The microspheres shows good releasing property from drug release in vitro, and the drug release rate decreases as the increase of microspheres size.     

A new, improved synthesis of the trisaccharide repeating unit of the O-antigen from Xanthomonas campestris pv. campestris 8004

Recent studies have revealed that lipid-A and core fragments of the lipopolysaccharide from Xanthomonas campestris pv. campestris 8004 (Xcc), a phytopathogenic Gram-negative bacterium, are able to elicit plant immunity with two independent mechanisms. To date, nothing is known about the effect of the O-antigen portion. Since its separation from the core region by selective chemical degradation is very difficult, the chemical synthesis of related oligosaccharides is strictly necessary. In this paper a new, improved synthesis of the O-antigen repeating unit is presented. The main improvements in the synthesis are: (1) a shorter, high-yielding preparation of an efficient glycosyl donor of the rare sugar 3-acetamido-3,6-dideoxy-d-galactopyranose (3-acetamido-d-fucose, d-Fucp3NAc); (2) a new protecting group pattern, which is demonstrated to open a path to the future synthesis of higher oligomers.     

hGH release from directly compressed hGH-PLGA biodegradable implantable tablets: Influence of physicomechanical factors

The incidence of compression conditions, porosity and polymer degradation on human growth hormone (hGH) release from PLGA implantable tablets was evaluated with the aim of gaining insight in the mechanism involved in drug delivery from biodegradable matrices. Tablets elaborated by direct compression of hGH with PLGA, applying various compression forces for different times, kept the integrity and the stability of the hormone. Tablet dimensions, viscoelastic properties, glass to rubber transition temperature (T_g), PLGA degradation rate and water uptake were analyzed in the freshly prepared implantable tablets as well as at several times during release test in phosphate buffer pH 7.4. Placebo tablets were also prepared to evaluate the incidence of hGH on the physicomechanical properties of the device and PLGA degradation rate. Porosity remarkably determined the amount of hGH released, through an effect on the easiness of water penetration in the tablet and on the beginning of PLGA degradation. The decrease in PLGA molecular weight during the first days in the release medium, despite of being minor, significantly conditioned hGH release rate. The more dramatic changes in PLGA molecular weight observed after 20 days in the release medium notably reduced the T_g and the viscous and elastic moduli of the tablets. The overall analysis of the events underwent by the tablets in contact with the aqueous medium was used to explain the drug release profile and may help to optimize the design of the PLGA-based implantable tablets as peptidic drug delivery systems.     

Influence of hydrolytic degradation on the surface properties of poly-5d/95l-lactide resorbable bone plates

This study explores in vitro aging effects on the surface properties of resorbable PLA95 (poly-5d/95l-lactide) bone plates. The in vitro degradation of injection molded PLA95 bone plates was undertaken by soaking them in a PBS solution. Specimens were harvested at 0, 4, 6, 8, 12, 20, and 26 weeks. After each in vitro aging period, the surface morphology, viscosity, chemical structure, wettability, and thermal properties of the PLA95 bone plates were examined by scanning electron microscopy (SEM), capillary viscometers, attenuated total reflection fourier transform infrared spectroscopy (ATR-FTIR), contact angle, and modulated differential scanning calorimetry (MDSC), respectively. The surface morphology of aged PLA95 bone plates exhibited bulk erosion. As hydrolysis progressed, the inherent viscosity (I.V.) of the PLA95 plates gradually decreased from 0.83 ± 0.01 dL/g at week 0-0.46 ± 0.03 dL/g at week 26. However, the absorbance peak intensity ratio between δ_{as CH3} (A_1452 cm⁻¹) and ν_CO (A_1750 cm⁻¹) and the contact angle reveal different tendencies than that of molecular weight, which decreases. The contact angle of the PLA95 plates decreased until week 4, increased until week 8, and subsequently decreased again. Peak separation analysis reveals that the equilibrium part of the modulated DSC overlapped curves exhibit triple endothermic peaks. Over time, in vitro degradation changes the position and area of the individual peaks. After different time periods of degradation, the variation of wettability shows a tendency similar to the change of PLA95 plates crystallinity; the intensity ratio of A_1452 cm⁻¹ and A_1750 cm⁻¹ (δ_{as CH3}/ν _CO) absorbance peaks varied like the ratio of β/α-crystal heat of fusion. Results also show a similarity in the degradation time dependence in MDSC, contact angle, and ATR-FTIR measurements. During the in vitro aging process, the breakdown and subsequent recrystallization of PLA95 molecular chains might be attributed to a progressive change in wettability and the molecular conformation between δ_{as CH3} and ν_CO.     

Electrospinning of α,β-poly(N-2-hydroxyethyl)-dl-aspartamide-graft-polylactic acid to produce a fibrillar scaffold

α,β-Poly(N-2-hydroxyethyl)-dl-aspartamide grafted with polylactic acid (PHEA-g-PLA) is a biocompatible and biodegradable amphiphilic copolymer that has been already employed to prepare a drug delivery system.In this study we have prepared for the first time a fibrillar scaffold from PHEA-g-PLA by the electrospinning of a solution of this copolymer in a mixture of N,N-dimethyl formamide (DMF) and acetone (80:20 vol/vol). The average diameter and the morphology of electrospun fibers were detected by scanning electron microscopy.Chemical degradation studies in phosphate buffer solution pH 7.4 have been performed until 15 days in order to obtain a preliminary information about the hydrolytic resistance of the prepared scaffold.     

d-Poly(lactide) and LHRH decapeptide stereointeractions investigated by vibrational spectroscopy

The interactions between poly(d-lactic acid) (PDLA) and l-configured leuprolide (LHRH) to form heterocomplexes were investigated by a combination of infrared (IR), Raman and near infrared spectroscopy (NIR). It was found that an α crystal with 10₃ helical conformation of PDLA is formed in the PDLA/LHRH heterocomplexes with various LHRH loadings, whereas the secondary structures of LHRH in these heterocompelexes are greatly affected by the blend ratio of LHRH and PDLA. Based on the analysis of IR, Raman and NIR spectra of the various heterocomplexes, it is suggested that stereoselective Van der Waals interactions, consisting of interwined α helices of PDLA and LHRH, is responsible for the driving force of PDLA and LHRH stereocomplexation. To clarify the solid structure and the potential interaction in these heterocomplexes with various LHRH loadings, temperature-dependent IR spectral measurements were also employed. On the basis of the results presented, a model for the PDLA and LHRH stereointeraction process was proposed.     

Interactions of aluminum(III) with the biologically relevant ligand d-ribose

Aluminum(III) can be absorbed when it is appropriately complexed. There are several plasma components which can bind weakly Al(III). Many proteins bind Al(III) in solution quite strongly. Carbohydrates bearing an abundance of electronegative functional groups can interact with metal cations. In solution, d-ribose exists as a mixture at equilibrium of many isomers and only a few of them bear a ‘complexing’ sequence of the hydroxyl groups. The presence of d-ribose in an Al(III) solution experiences a decrease of its Brönsted-acid sites. The lowering of the Brönsted acidity of an Al(III)-d-ribose mixture suggests the existence of attractive interactions (‘association’) between Al(III) ion and the complexing sequence of the hydroxyls of d-ribose. There is enhancement in the stability of the interaction complexes between Al(III) and d-ribose through strong intramolecular hydrogen bonding, which offers the possibility to investigate the kinetics of the subsequent proton release reactions. On the basis of the kinetic results, it may be concluded that proton release reactions, which are associated with the complexation reactions, are associatively activated. The complexes (Al(H₂O)_6−n(d-ribose_−nH)⁽³⁻ⁿ⁾⁺) resulting from the various ‘complexing’ forms of d-ribose are formed at mainly acidic pH. As the pH increases, the values of the activation enthalpy, ΔH^≠, are changing, because of the formation of mixed hydroxo-complexes (Al(H₂O)_6−n−m(OH)_m(d-ribose_−nH)^(3−n−m)+); finally, OH⁻ displaces d-ribose from the coordination sphere of Al(III) in a rather slow process, i.e. with high values of ΔH^≠; the activation enthalpy values, ΔH^≠, decrease with the progression of the displacement, becoming finally very small due to the formation of a precipitate. Chelate coordination of d-ribose with some divalent and trivalent metal ions has been also reported.     

New organotin(IV) complexes with l-Arginine, Nα-t-Boc-l-Arginine and l-Alanyl-l-Arginine: Synthesis, structural investigations and cytotoxic activity

Novel diorganotin(IV) derivatives of l-Arginine (HArg), N_α-(tert-Butoxycarbonyl)-l-Arginine (Boc-Arg-OH) and l-Ala-l-Arg (H₂Ala-Arg), H₂NC(NH)NH(CH₂)₃CH(NHR′)CO₂H, where R′ = H in HArg, R′ = C(O)OC(CH₃)₃ in Boc-Arg-OH, R′ = H₂NCH(CH₃)CO in H₂Ala-Arg and triorganotin(IV) derivatives of Boc-Arg-OH have been synthesized and structurally characterized. The complexes were investigated by FT-IR and ¹¹⁹Sn Mössbauer in the solid state and by ¹H, ¹³C, ¹¹⁹Sn and ¹H-¹H COSY NMR spectroscopy, in solution. The spectroscopic characterization leading to the proposed molecular structures was accomplished on the basis of these experiments. l-Arginine appears to behave as a chelating ligand through carboxylate and -NH₂ groups in Me₂Sn(Arg)₂, while in N_α-t-Boc-l-Arginine complex, the N_α-protected amino group being exempted from coordination, only the carboxylate groups are effectors of bonding to the organometallic moieties. FT-IR spectra give a clear indication that guanidino groups in all the complexes are not involved in coordination, since ν(CN-H) frequency of the terminal guanidino group is fairly constant and unshifted relative to the free ligand. The biological activity of organotin(IV)-complexes was also investigated by use of human HT29 colorectal carcinoma cells. The cytotoxic activity of the compounds was determined by the MTT quantitative colorimetric assay, capable of detecting viable cells in comparison with that exerted by cisplatin. A marked cytotoxic activity for nearly all complexes, is evident being higher than that exerted by cisplatin, while no significant improvement of activity was observed for Me₂Sn(Arg)₂ and Me₂Sn(Ala-Arg), which was confirmed by IC₅₀ values. Then, we assessed whether the cytotoxicity induced by organotin(IV) complexes was associated with the induction of apoptosis. Light microscopy analysis, performed to study the morphological changes induced in HT29 cells, confirmed the results obtained with MTT test. No significant morphological alterations were observed in HT29 cells after treatment with Me₂Sn(Ala-Arg) and Me₂Sn(l-Arg)₂. Cells treated with ⁿBu₂Sn(Boc-Arg)₂, ⁿBu₂Sn(Ala-Arg), ⁿBu₃Sn(Boc-Arg) and Me₃Sn(Boc-Arg), appeared rounded, isolated and detached from culture substrate, indicating the commitment to apoptotic cell death.     

Efficient synthesis of new N-alkyl-d-ribono-1,5-lactams from d-ribono-1,4-lactone

d-Ribono-1,4-lactone was treated with ethylamine in DMF to afford N-ethyl-d-ribonamide 9a in quantitative yield. Bromination of amide 9a by the system SOBr₂ in DMF or PPh₃/CBr₄ in pyridine led, after acetylation, to epoxide 7. However, treatment of amide 9a with acetyl bromide in dioxane followed by acetylation gave 2,3,4-tri-O-acetyl-5-bromo-5-deoxyl-N-ethyl-d-ribonamide 10a. Methanolysis of 10a, with sodium methoxide, afforded the N-ethyl-d-ribonolactam 11a in 51% overall yields. Using this method, N-butyl, N-hexyl, N-dodecyl, and N-benzyl-d-ribonolactams 11b-e were obtained in good yields (48-53%).     

Prevailing mechanisms of the hydrolytic degradation of oligo(d,l-lactide)-grafted dextrans

The predominant mechanism of the hydrolytic degradation of oligo(d,l-lactide)-grafted dextrans in phosphate buffer was followed by quantifying both released dextran and lactic acid from the copolymers. The studied amphiphilic copolymers, with well-defined structure, exhibited various oligo(d,l-lactide) weight fractions (F^OLA) while having a quite high extent of free hydroxyl groups (>90%). Depending on their F^OLA, oligo(d,l-lactide)-grafted dextrans were soluble either in water or in organic solvents (THF, toluene, …) and different prevailing mechanisms of hydrolytic degradation were observed. The copolymer soluble in THF, with longer oligo(d,l-lactide) grafts and higher F^OLA, was found to degrade via a particular mechanism by which the greatest part of dextran was released into buffer medium during the first two weeks of degradation. During the initial stage of degradation, the hydrophilicity of dextran backbone was considered to be the main driving force for the hydrolytic cleavage of the ester linkage between backbone and grafts. Released oligo(d,l-lactide) grafts were found to be degraded via chain-end degradation or random degradation depending on their solubility in buffer medium. In case of water-soluble copolymers with shorter oligo(d,l-lactide) grafts and lower F^OLA, the chain-end degradation was exclusively observed.     

Synthesis and RNA-selective hybridization of α-l-ribo- and β-d-lyxo-configured oligonucleotides

Three α-l-ribofuranosyl analogues of RNA nucleotides (α-l-RNA analogues) have been synthesized and incorporated into oligonucleotides using the phosphoramide approach on an automated DNA synthesizer. The 4′-C-hydroxymethyl-α-l-ribofuranosyl thymine monomer was furthermore synthesized. Relative to the unmodified duplexes, incorporation of a single α-l-RNA monomer into a DNA strand leads to reduced thermal stability of duplexes with DNA complements but unchanged thermal stability of duplexes with RNA complements, whereas incorporation of more than one α-l-RNA monomer lead to moderately decreased thermal stability also of duplexes with RNA complements. Efficient hybridization with an RNA complement and no melting transition with a DNA complement were observed with stereoregular chimeric oligonucleotides composed of a mixture of α-l-RNA and affinity enhancing α-l-LNA monomers (α-l-ribo-configured locked nucleic acid). Furthermore, duplexes formed between oligodeoxynucleotides containing an α-l-RNA monomer and complementary RNA were good substrates for Escherichia coli RNase H. RNA-selective hybridization was also achieved by the incorporation of 1-(4-C-hydroxymethyl-β-d-lyxofuranosyl)thymine monomers into a DNA strand, whereas stable duplexes were formed with both complementary DNA and RNA when these monomers were incorporated into an RNA strand.     

Effects of molecular weight and small amounts of d-lactide units on hydrolytic degradation of poly(l-lactic acid)s

Films of poly(l-lactic acid) (PLLA) with different number-average molecular weights (M_n) and d-lactide unit contents (X_d) were made amorphous and the effects of molecular weight and small amounts of d-lactide units on the hydrolytic degradation behavior in phosphate-buffered solution at 37 °C of PLLA were investigated. The degraded films were investigated using gravimetry, gel permeation chromatography, polarimetry, differential scanning calorimetry, X-ray diffractometry, and tensile testing. To exclude the effects of crystallinity on the hydrolytic degradation, the films were made amorphous by melt-quenching. The incorporation of small amounts of d-lactide units drastically enhanced the hydrolytic degradation of PLLA. In the period of 0-32 weeks, the hydrolytic degradation rate constant (k) of PLLA films increased with increasing X_d, while the k values did not depend on M_n. This means that the effects of X_d on the hydrolytic degradation rate of the films are higher than those of M_n. In contrast, in the period of 32-60 weeks neither X_d nor M_n was a crucial parameter to determine k values, probably because in addition to these parameters the differences in the amount of catalytic oligomers accumulated in films and crystallinity affect the hydrolytic degradation behavior of the films. The initially amorphous PLLA films remained amorphous even after the hydrolytic degradation for 60 weeks.     

Chemo-enzymatic preparation of chiral 3-aminopyrrolidine derivatives

A new simple method for the enantioselective enzymatic hydrolysis of N-protected D-asparagine esters suitable for the use on the preparative scale is presented. Due to major obstacles observed under conventional reaction conditions—racemization of the retained ester and a strong enzyme inactivation—a comparatively low pH together with an organic co-solvent had to be employed. Under these conditions, nearly all tested proteases demonstrated good activity and excellent enantioselectivity giving access to the corresponding d-esters and L-asparagines in high optical purities (>95% ee) and good chemical yields (>40%). From the unnatural d-asparagine derivative, sequential cyclization, selective deprotection and reduction yielded efficiently benzyl protected (R)-3-aminopyrrolidine, a homo-chiral building block utilized in numerous drug candidates.     

Novel cationic polyaspartamide with covalently linked carboxypropyl-trimethyl ammonium chloride as a candidate vector for gene delivery

The non-viral gene vector properties of a protein-like polymer, the α,β-poly(N-2-hydroxyethyl)-d,l-aspartamide (PHEA) were investigated after its derivatization with 3-(carboxypropyl)trimethyl-ammonium chloride (CPTA) as molecule bearing cationic groups, in order to obtain stable polycations able to condense DNA. PHEA was firstly functionalized with hydrazide pendant groups by reaction with hydrazine monohydrate (HYD), obtaining the polyhydrazide α,β-poly(N-2-hydroxyethyl/carbazate)-d,l-aspartamide (PHEA-HYD). In this paper we reported that polymer functionalization degree can be easily modulated by varying reaction conditions, so allowing us to produce two PHEA derivatives at different molar percentage of hydrazide groups. Subsequently, condensation reaction of PHEA-HYD copolymers with CPTA yielded α,β-poly(N-2-hydroxyethyl)-N-carbazate[N′-(3-trimethylammonium chloride)propylhydrazide]-d,l-aspartamide (PHEA-HYD-CPTA) polycation derivatives. In vitro studies were carried out to evaluate polycations ability to complex DNA and to protect it from nuclease degradation. Obtained results demonstrated the good efficiency of our new PHEA-polycations derivatives, PHEA-HYD-CPTA, to complex and condense genomic material even at very low polycation/DNA weight ratio.     

Determination of L- and D-enantiomers of methotrexate using amperometric biosensors

In order to determine the enantiopurity of methotrexate (Mtx), seven biosensors were proposed for the assay of l-Mtx and three biosensors for the assay of d-Mtx. The biosensors were designed using physical and chemical immobilization of glutamate oxidase and/or l-amino acid oxidase (l-AAOD) and/or horseradish peroxidase (HRP) for the assay of l-methotherexate, and d-amino acid oxidase (d-AAOD) and HRP for the assay of d-Mtx. Electrode characteristics were obtained and compared for the different carbon paste based biosensors. The linear concentration ranges for the proposed biosensors were in the ranges of fmol l⁻¹ to pmol l⁻¹, magnitude order with limits of detection in the fmol l⁻¹ to nmol l⁻¹ concentration range. All biosensors were successful for the determination of the enantiopurity of Mtx as raw material, and in its pharmaceutical formulations (tablets and injections).     

A d,l-proline catalyzed diastereoselective trimolecular condensation: an approach to the one-pot synthesis of perhydrofuro[3,2-b]pyran-5-ones

d,l-Proline was found to catalyze efficiently the one-pot trimolecular condensation of indoles, a sugar hydroxyaldehyde, and Meldrum’s acid followed by intramolecular cyclization with evolution of carbon dioxide and elimination of acetone to afford 7-(1H-3-indolyl)-2,3-dimethoxyperhydrofuro[3,2-b]pyran-5-ones. The reaction proceeded cleanly at ambient temperature to afford the products in good yields with high diastereoselectivity.     

An efficient approach to d-threo-3-hydroxyaspartic acid for the synthesis of novel l-threo-oxazolines as selective blockers of glutamate reversed uptake

An efficient, stereoselective synthetic strategy to d-threo-3-hydroxyaspartic acid was developed. Starting from l-(2S,3S)-N-benzoyl-3-hydroxyaspartic acid dimethyl ester by a Deoxo-fluor-catalyzed cyclization reaction, an inversion of configuration at the β-center (erythro isomer), was observed. A base-induced epimerization reaction led to the d-trans-isomer, which was hydrolyzed to give d-threo-3-hydroxyaspartic acid with excellent stereoselectivity and overall yield. Starting from d-threo-3-hydroxyaspartic acid, l-threo-oxazolines can be stereoselectively synthesized.     

ESI-MS study of the mechanism of glycyl-l-histidyl-l-lysine-Cu(II) complex transport through model membrane of stratum corneum

In mammalian organisms copper can be found mainly in the form of complex with specific tripeptide, GHK-Cu (glycyl-l-histidyl-l-lysine-Cu(II)). GHK-Cu is the basic form in which copper is transported in tissues and permeates through cell membranes. The penetration ability of GHK-Cu through the stratum corneum and its role in copper ions transport process is the key issue for its cosmetic and pharmaceutical activity. The permeability phenomenon was studied by use in vitro model system—Flynn diffusion cell with the liposome membrane.The earlier studies on the influence of different ligands on the migration rate of copper ions through model membrane provide evidence for hampering role of ligands structure and pH of formulations in this process.Structures of copper complexes formed in solutions of different pH media were evaluated by use of ESI-MS. The permeability coefficients of copper complexes increase with increasing pH. It was proved that only tripeptide GHK and its complexes with copper: GHK-Cu and (GHK)₂-Cu are able to migrate through membrane model of stratum corneum.