Studies of end-groups in polystyrene using H NMR

Studies have been made by 400 MHz ¹H NMR of initiator fragments in polystyrene made by radical polymerization in solution at 60 °C. Azoisobutyronitrile, benzoyl peroxide and lauroyl peroxide have been used as initiators. The peaks arising from hydrogens in the end-groups have been recognized. They cause alterations in the ratio of “aromatic hydrogens” to “aliphatic hydrogens” for polystyrene.     

Double-ion imprinted polymer @magnetic nanoparticles modified screen printed carbon electrode for simultaneous analysis of cerium and gadolinium ions

A typical, reproducible, and rugged screen printed carbon electrode, modified with dual-ion imprinted beads, was fabricated employing the “surface grafting from” approach. For this, the acyl chloride functionalized magnetic nanoparticles were first immobilized and chemically attached with a typical functional monomer (but-2-enedioic acid bis-[(2-amino-ethyl)-amide]) on the electrode surface. This was subsequently subjected to the thermal polymerization in the presence of template ions (Ce(IV) and Gd(III)), cross-linker (ethylene glycol dimethacrylate), initiator (AIBN), and multiwalled carbon nanotubes. The modified sensor was used for the simultaneous analysis of both template ions in aqueous, blood serum, and waste-water samples, using differential pulse anodic stripping voltammetry which revealed two oxidation peaks for respective templates with resolution as much as 950 mV, without any cross reactivity, interferences and false-positives. The detection limits realized by the proposed sensor, under optimized conditions, were found to be as low as 0.07 ng mL⁻¹ for Ce(IV) and 0.19 ng mL⁻¹ for Gd(III) (S/N = 3) that could eventually be helpful for lanthanide estimation at stringent levels.     

Synthesis and physico-chemical characterization of Au/TiO2 nanostructures formed by novel “cold” and “hot” nanosoldering of Au and TiO2 nanoparticles dispersed in water

A novel approach to synthesize Au/TiO₂ nanostructures with interesting optical properties is presented and discussed. It is based on the nanoparticle “cold” or “hot” nanosoldering occurring when two water suspensions of Au and TiO₂ nanoparticles are merely mixed at room temperature or laser irradiated after mixing.Thanks to the high fraction and mutual reactivity of surface species, immediately after the mixing process, the encounters between Au and TiO₂ nanoparticles in liquid phase are enough for “cold” nanosoldering of gold nanoparticles onto TiO₂ nanoparticles to occur. The optical characterizations show that this fast process (timescale less than 1 min) is followed by a slower process, attributable to some change of the Au nanoparticles. This latter process is significantly accelerated by the 532 nm laser light illumination. The structural and optical properties of “cold” and “hot” nanosoldered Au-TiO₂ nanoparticles were investigated by TEM, UV-vis and fluorescence spectroscopies.Interesting optical limiting response was detected at laser fluences above 0.8 J/cm². The nature of the nonlinear effect was investigated by the Z-scan technique, determining both the nonlinear absorption coefficient and the refraction index. Such interesting non-linear optical properties are worth to be tailored for specific applications.     

Magnetic molecular wheels and grids - the need for novel concepts in “zero-dimensional” magnetism

Supramolecular chemistry has allowed the production, by self-assembly, of inorganic complexes with a [N × N] square matrix-like configuration of N² metal centers. Interest in these systems is driven by the potential applications in information technology suggested by such a “two-dimensional” (2D), addressable arrangement of metal ions. From the magnetic perspective [N × N] grids constitute molecular model systems for magnets with extended interactions on a square lattice, which have gained enormous attention in the context of high-temperature superconductors. Numerous [2 × 2] grids as well as a few [3 × 3] grids with magnetic metal ions such as Cu(II), Ni(II), Co(II), Fe(II), and Mn(II) have been created. Magnetic studies unraveled a remarkable variety in their magnetic properties, which will be reviewed in this work with emphasis on the underlying physical concepts. An intriguing issue is the connection of [2 × 2] and [3 × 3] grids with “one-dimensional” (1D) rings, as experimentally realized in the molecular wheels. For a [2 × 2] square of spin centers the distinction between a 2D grid and a 1D ring is semantic, but also a [3 × 3] grid retains 1D character: it is best viewed as an octanuclear ring with an additional ion “doped” into its center. Challenging familiar concepts from conventional magnets, the current picture of elementary excitations in antiferromagnetic rings will be discussed, as a prerequisite to understand the complex [3 × 3] grids.     

Characterization of an electrochemical mercury sensor using alternating current,cyclic, square wave and differential pulse voltammetry

Here we report the characterization of an electrochemical mercury (Hg²⁺) sensor constructed with a methylene blue (MB)-modified and thymine-containing linear DNA probe. Similar to the linear probe electrochemical DNA sensor, the resultant sensor behaved as a “signal-off” sensor in alternating current voltammetry and cyclic voltammetry. However, depending on the applied frequency or pulse width, the sensor can behave as either a “signal-off” or “signal-on” sensor in square wave voltammetry (SWV) and differential pulse voltammetry (DPV). In SWV, the sensor showed “signal-on” behavior at low frequencies and “signal-off” behavior at high frequencies. In DPV, the sensor showed “signal-off” behavior at short pulse widths and “signal-on” behavior at long pulse widths. Independent of the sensor interrogation technique, the limit of detection was found to be 10 nM, with a linear dynamic range between 10 nM and 500 nM. In addition, the sensor responded to Hg²⁺ rather rapidly; majority of the signal change occurred in <20 min. Overall, the sensor retains all the characteristics of this class of sensors; it is reagentless, reusable, sensitive, specific and selective. This study also highlights the feasibility of using a MB-modified probe for real-time sensing of Hg²⁺, which has not been previously reported. More importantly, the observed “switching” behavior in SWV and DPV is potentially generalizable and should be applicable to most sensors in this class of dynamics-based electrochemical biosensors.     

Fabricating a reversible and regenerable electrochemical biosensor for quantitative detection of antibody by using “triplex-stem” DNA molecular switch

A reversible and regenerable electrochemical biosensor is fabricated for quantitative detection of antibody based on “triplex-stem” molecular switches. A hairpin-shaped oligonucleotide (hairpin DNA) labeled with ferrocene (Fc) at the 3′-end is fixed on the gold electrode serving as a signal transduction probe. Its hairpin structure leads Fc close to the surface of gold electrode and produces a strong current signal (on-state). A single-strand oligonucleotide modified with two digoxin molecules on the two arm segments (capture DNA) interact with hairpin DNA with the help of Ag⁺ ions. The “triplex-stem” DNA forms, which separates Fc from the electrode and reduces the electrochemical signal (off-state). Binding of digoxin antibody to digoxin releases capture DNA from the hairpin DNA, creating an effective “off-on” current signal switch. The stability of the “triplex-stem” structure of hairpin/capture DNA is critical to the signal switch and the sensitivity of the method, which can be adjusted conveniently and efficiently by changing Ag⁺ concentrations. Based on the “off-on” current signal switch, this biosensor is used to detect digoxin antibody sensitively in blood serum. The linear range is 1.0–500 pg with a correlation coefficient of 0.996, and the detection limit is 0.4 pg. Also, this biosensor shows excellent reversibility and reproducibility, which are significant requirements for practical biosensor applications.     

Two coordination modes of TCNE in the ruthenium amidinates: The first example providing experimental evidence for κ-N to η-C rearrangement

Reactions of Cp^∗Ru(κ²-N(R)C(R′)NR) (1a; R = ⁱPr, R′ = Me, 1b; R = ^tBu, R′ = Ph) with TCNE initially give dark green colored intermediary species, which are readily converted to brown colored “η²-C” coordination complexes, Cp^∗Ru(κ²-N(R)C(R′)NR)(η²-TCNE) (3a; R = ⁱPr, R′ = Me, 3b; R = ^tBu, R′ = Ph). These “η²-C” complexes are characterized by spectroscopy and crystallography. A stable ruthenium amidinate having a “κ¹-N”-coordinated TCNE, Cp^∗Ru(κ²-N(^tBu)C(Mes)N^tBu)(κ¹(N)-TCNE) (2c), is synthesized by treatment of Cp^∗Ru(κ²-N(^tBu)C(Mes)N^tBu) (1c) with TCNE, the structure of which is unequivocally confirmed by X-ray structure determination and the charge transfer nature is supported by ESR analysis. Close analogy in IR and UV-Vis spectroscopy of 2c with the dark green colored intermediary species formed from 1b suggests that this is “κ¹-N” ruthenium amidinate, which is rearranged to the “η²-C” complex 3b.     

Albumin molecularly imprinted polymer with high template affinity — Prepared by systematic optimization in mixed organic/aqueous media

An approach using systematic optimization for the formation of an albumin molecularly imprinted polymer (MIP), able to separate albumin from proteins in solution, has been prepared by imprinting albumin using a copolymer comprising 3-dimethylaminopropyl methacrylate and tetraethylene glycol dimethacrylate in a mole ratio of 1 to 8. Cytochrome c, lysozyme and myoglobin were used in competitive re-binding experiments to compete with the polymer's native template with all protein species present at 0.0004 g mL^− 1. The effects of: monomer to crosslinker mole ratio, polymerization temperature and time were investigated. It was found that the addition of water 6.04%, into the pre-polymerization albumin-monomer complex enhanced the adsorption capacity and selectivity of the resulting MIP from 2.18 × 10^− 3 to 6.02 × 10^− 3 g g-MIP^− 1 and 83.5% to 98.7%, respectively. These results also showed that the MIP possessed high selectivity and adsorption capacity with respect to albumin in comparison with interfering species also present in solution. Polymerization temperature, time and the water content of the pre-polymerization mixture were all shown to have significant effects on the resulting albumin-MIP's performance. However, their influence on the polymer's affinity for the potentially interfering species was negligible. Additionally, higher polymerization temperatures (> 38 °C) and extended polymerization times (> 60 h) increased monomer conversion as determined by HPLC, but decreased the selectivity and adsorption capacity of the MIP. An optimized MIP, with very high selectivity and 6.37 × 10^− 3 g g-MIP^− 1 template re-adsorption capacity was obtained using the following polymerization conditions: 0.125 mole ratio of monomer to crosslinker, 6.04 wt.% water content with respect to the mass of the monomer complex, 60 h polymerization time at 38 °C, and with 0.47% albumin in the pre-polymerization monomer complex. Finally, the functions of polymerization temperature, time and the significance of the water content in the albumin-monomer complex are also discussed.     

Thermal and photochemical curing of isocyanate and acrylate functionalized oligomers

Dual-cure formulations have been developed in order to broaden the range of applications of UV-radiation curing and achieve a sufficient cure of the non-illuminated areas of protective coatings, like the shadow areas of three-dimensional substrates or the deep-lying layers of thick pigmented coatings. In complement to the conventional acrylic photopolymerization, such systems involve a polyaddition reaction between isocyanate and hydroxyl functions upon heating, thus imparting satisfying mechanical properties to the coatings, even in the non-irradiated areas. For a quantitative study of the two curing reactions, infrared spectroscopy was chosen because it allows one to monitor accurately the chemical modifications induced in thin films by heat or light. This technique proved particularly useful to follow the polyaddition reaction through the decay of the characteristic IR band of the isocyanate group at 2271 cm⁻¹. Several factors were shown to affect the reaction rate, in particular the chemical structure of the various functionalized compounds, the moisture content in the atmosphere, the curing temperature and the presence of amino catalysts. The viscoelastic properties of the resulting material have been evaluated by dynamic mechanical analysis and shown to be highly dependent on the curing conditions and the type of polymer network formed. For coatings which remain too soft in the dark areas, a thermal initiator was added to promote some further polymerization of the acrylate monomers.     

Sampling 4-chlorophenol in water by DGT technique with molecularly imprinted polymer as binding agent and nylon membrane as diffusive layer

For the first time, a diffusive gradients in thin films (DGT) device using molecularly imprinted polymer (MIP) as the binding agent and nylon membrane (NM) as the diffusive layer (NM-MIP-DGT) has been developed for sampling 4-chlorophenol (4-CP) in water. The MIP was prepared by precipitation polymerization with methacrylic acid as monomer and ethyleneglycoldimethacrylate as cross-linker. The diffusion coefficient of 4-CP through NM was obtained to be 0.788 ± 0.040 μ cm² s⁻¹ by diffusion cell method. The ratio was 1.01 ± 0.05 (mean ± standard deviation) for the concentration of 4-CP sampled by NM-MIP-DGT and analyzed by HPLC method to the total concentration of 4-CP in the synthetic solution where free 4-CP species dominated. The results showed that NM-MIP-DGT could sample 4-CP in synthetic solution accurately. The performance of NM-MIP-DGT for sampling 4-CP was independent of pH in the range of 3–7 and ionic strength in the range of 0.0001–0.1 mol L⁻¹ NaCl solution. The concentration of free form of 4-CP sampled by NM-MIP-DGT decreased with the increasing concentration of dissolved organic carbon in different water samples due to the electrostatic interaction of natural organic compounds with 4-CP. 1.8 mg L⁻¹ of the free form of 4-CP was determined by HPLC which was sampled by NM-MIP-DGT in an intermediate untreated industrial effluent. The NM-MIP-DGT can be a potential passive tool for sampling the free form of 4-CP in water.     

Diffusion and phase transformations in spark plasma synthesized and sintered Cu-V2O5 couples

Fast diffusion of Cu into V₂O₅ at 520 °C is studied in Cu-V₂O₅ diffusion couples sintered by spark plasma sintering. The impact, on the diffusion profiles, of phase transformations and of variations of the diffusion coefficient with Cu concentration is discussed. From the pure Cu source, two phases are observed to spread, leading to a “two-step-like” shape of the diffusion profiles. In the more concentrated phase (phase ε), the diffusion coefficient D of Cu is ≈3×10⁻⁸ m²/s. This is a remarkably high value, of the same order of magnitude as self-diffusion in liquid metals. In the less concentrated phase (phase β′), D is lower than in ε. This is due to the differences in the diffusion mechanisms of Cu in these two phases: two dimensional in ε and one dimensional in β′. In β′, D strongly depends on Cu concentration. This is in good agreement with computer simulations reported in the literature.     

Construction of a simple optical sensor based on air stable lipid film with incorporated urease for the rapid detection of urea in milk

This work describes the construction of a simple optical sensor for the rapid, selective and sensitive detection of urea in milk using air stable lipid films with incorporated urease. The lipid film is stabilized on a glass filter by polymerization using UV (ultra-violet) radiation prior its use. Methacrylic acid was the functional monomer, ethylene glycol dimethacrylate was the crosslinker and 2,2′-azobis-(2-methylpropionitrile) was the initiator. Urease is incorporated within this mixture prior to the polymerization. The presence of the enzyme in these films quenched this fluorescence and the colour became similar to that of the filters without the lipid films. A drop of aqueous solution of urea provided a “switching on” of the fluorescence which allows the rapid detection of this compound at the levels of 10⁻⁸ M concentrations. The investigation of the effect of potent interferences included a wide range of compounds usually found in foods and also of proteins and lipids. These lipid membranes were used for the rapid detection of urea in milk.     

Study on thermal cure and heat-resistant properties of N-(3-acetylenephenyl)maleimide monomer

N-(3-acetylenephenyl)maleimide (3-APMI), was synthesized by reacting 3-aminophenylacetylene (3-APA) with maleic anhydride by the usual two-step procedure that included ring-opening addition to give maleamic acid, followed by cyclodehydration to maleimide. Structure of the monomer was confirmed by Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H NMR), elemental analysis (EA) and mass spectrum (MS). Thermal cure of the monomer was investigated by differential scanning calorimetry (DSC) and FTIR, then processing parameters and cure kinetics parameters were determined. The results showed that the monomer possesses excellent reactivity, whose cure peak temperature was 197.9 °C and cure reaction was almost complete after 4 h cure at 200 °C. Thermal properties of the cured monomer were determined by dynamic mechanical analysis (DMA) and the results show that glass transition temperature (represented by onset temperature of storage modulus) is high up to 460 °C. The results of thermogravimetry analysis (TGA) reveal that the cured monomer possessed excellent thermal stability, whose 10% weight loss temperature (T_10%) is 515.6 °C and char yield at 800 °C is 59.1%. All these characteristics make the 3-APMI monomer be an ideal candidate for matrix of thermo-resistant composites.     

A novel approach to graft acrylates onto commercial silicones for release film fabrications by two-step emulsion synthesis

In this study, a two-step emulsion polymerization method was specially designed so as to effectively graft acrylate monomers onto commercial silicones and improve the properties of release films. FT-IR, DSC and grafting ratio tests showed that the grafting reaction happened and a high grafting ratio can be achieved when the silicone content was more than 20%. According to SEM-EDX result, the “sea-island” structure on the surface of release films made by acrylate-modified silicone latexes was proven. The silicones formed the continuous “sea” structure and the grafted acrylate polymers formed the segregated “island” structure. The carbon and silicon distributions were not uniform through the cross-section of release films made by acrylate-modified silicone latexes. After acrylate modification, the surface tension of silicone release films increased from 19-21 mN/m (before acrylate modification) to 30 mN/m and the release force increased from 8.1 g/in. to 47 g/in. As a result, the properties of release films have been effectively improved by our novel method for advanced applications.     

An aptameric molecular beacon-based “Signal-on” approach for rapid determination of rHuEPO-α

The aim of this work is to describe the first example of aptameric molecular beacon (MB)-based probe for the detection of recombinant human erythropoietin (rHuEPO-α) in physiological buffer, using a novel 35 nt ssDNA aptamer (807-35 nt) originally isolated by Systematic Evolution of Ligands by Exponential enrichment (SELEX) technique in our laboratory. Both “Signal-on” and “Signal-off” MB modes were developed, respectively, in which the conformational alteration of aptamer before and after binding to rHuEPO-α can be demonstrated in terms of the correspondingly fluorescent changes. Comparing with “Signal-off” mode, “Signal-on” mode provided higher sensitivity, while with the addition of target rHuEPO-α, quenching between fluorescent 807-35 nt aptamer (F-Apt) and a short quencher-labeled complementary sequence (QDNA) was disturbed by the specific binding between rHuEPO-α and F-Apt. QDNA was thus loosened and released from F-Apt, leading to a consequently full fluorescent restoration. Systematic optimization of parameters in “Signal-on” mode were carried out, the choice of QDNA length, the hybridization site of a small supplementary DNA (SDNA) stabilizer, and the existence of Mg²⁺ cation played essential roles for the performance characterization. A convenient and sensitive determination of rHuEPO-α with a LOD of 0.4 nM was achieved.     

Exploiting in situ hydride trapping in tungsten coil atomizer for Se and As determination in biological and water samples

A flow injection hydride manifold was coupled to a 150 W tungsten coil electrothermal atomizer for in situ hydride collection followed by selenium and arsenic determination by ET AAS. Rhodium (200 μg), thermally reduced over the double layer tungsten atomizer, was very efficient at collecting selenium or arsenic hydrides. Prior to analysis, biological samples were digested in closed-vessels microwave digestion system. Prior to the hydride formation, both selenium and arsenic were reduced to valence state (IV) and (III), respectively. The detection limit was 35 ng L⁻¹ for selenium and 110 ng L⁻¹ for arsenic. Sample throughput was 70 h⁻¹ using 30 s of hydride trapping time. Method accuracy was evaluated by analyzing biological-certified reference materials from the National Institute of Standard and Technology (SRM-1577a and SRM-1577b “bovine liver” and RM-8414 “bovine muscle powder”) and from the International Agency for Energy Atomic (A-13 “animal blood”) and one water-certified reference material from the National Institute of Standard and Technology (SRM-1640 trace elements in natural water). By applying a t-test, there was no significant difference at the 95% probability level between the results obtained with the proposed method and those certified values.     

Pyrene-containing polystyrene segmented copolymer from nitroxide mediated polymerization and its application for the noncovalent functionalization of as-prepared multiwalled carbon nanotubes

This study reports simple and convenient procedures for the preparation of a novel surface modifier for multiwalled carbon nanotubes (CNTs) having uniform and controlled structure through controlled “living” free-radical polymerization technique. The technique afforded pyrene functionalized polystyrene block copolymers (PMAS) having controlled molecular weight, molecular weight distribution and length of each block for effective surface modification of CNTs. The modified CNTs exhibited much improved and stable dispersion in toluene. PMAS-CNT/polystyrene composites afforded clearer and more homogeneous films compared to those containing non-modified CNTs. The polystyrene films containing 2 wt% and 5 wt% of PMAS-CNTs showed improved AC conductivities of approximately 10⁻³ and 10⁻² S/cm, respectively, which were 10 ∼ 10⁶ times higher than those of films containing non-modified CNTs. These results demonstrated that PMAS effectively modified the surface of CNTs, which resulted in improved dispersion of CNTs in polystyrene matrices.     

Controlled/“living” atom transfer radical polymerization of methyl methacrylate in the synthesis of triblock copolymers from a poly(oxyethylene) macroinitiator

Atom transfer radical polymerization of methyl methacrylate initiated by a poly(oxyethylene) macroinitiator by the esterification of PEG 1500 with 2-chloro propionyl chloride was synthesized. These polymerization proceeds both in bulk and solution with a quantitative initiation efficiency, leading to A-B-A triblock copolymers. The macroinitiators and their block copolymers were characterized by FT-IR, FT-NMR and GPC analyses. In bulk polymerization, the kinetic study showed that the relationship between ln[M]₀/[M] vs time was linear showing that there is a constant concentration of active species throughout the polymerization and follow the first order kinetics with respect to monomer. Moreover, the experimental molecular weight of the block copolymers increased linearly with the monomer conversion and the polydispersity index remained between 1.3 and 1.5 throughout the polymerization. No formation of homo poly(methyl methacrylate) could also be detected, and all this confirms that the bulk polymerization proceeds in a controlled/“living” manner.     

Perfluoroelastomer and fluoroelastomer seals for semiconductor wafer processing equipment

Parts made from fluorinated elastomers, e.g., Kalrez^® perfluoroelastomer parts, parts made from Viton^® fluoroelastomer, are widely used as seals on semiconductor wafer processing equipment. Many of these seals are required to function in harsh chemical environments and at process temperatures ranging from 25 to 300 °C. Fluoroelastomers, including those of the perfluoroelastomer type, have extraordinary resistance to chemicals and heat, enabling them to withstand virtually any process media, including reactive plasmas, at temperatures as high as 316 °C.This paper is a review of perfluoroelastomers and fluoroelastomers used in semiconductor wafer processing. These seals offer cleanliness and lack of contamination while maintaining sealing functionality in aggressive media. Applications requiring resistance to both “wet” and “dry” process chemistry include etching, ashing, stripping, copper plating and chemical vapor deposition. Applications requiring thermal resistance include LPCVD, diffusion furnace and rapid thermal processing (RTP). A relative comparison of the various types of perfluoroelastomers used as well as a comparison to other elastomeric materials will also be discussed.     

Characterization of Acacia mangium polyflavonoid tannins by MALDI-TOF mass spectrometry and CP-MAS C NMR

The MALDI-TOF mass spectrometry (MS) and solid state CP-MAS ¹³C Nuclear Magnetic Resonance (NMR) spectroscopic technique were introduced to characterize Acacia mangium tannin (condensed tannins). The MALDI-TOF MS illustrated a series of peaks corresponding to oligomers of condensed tannins of up to 11 flavonoid units (3200 Da). A. mangium condensed tannins were found to consist predominantly of prorobinetinidin combined with profisetinidin and prodelphinidin. Both the MALDI-TOF mass spectra and the solid state CP-MAS ¹³C NMR indicated that the A. mangium tannins obtained from Kudat, had an almost completely linear structure; In addition, Lembah Beringin, consist of “angular” polymer structure; and Tawau, has included “twice-angular” polymer structures present in oligomers type of up to 7 flavonoid units. The high degree of polymerization of linear, angular type, twice-angular structures and longer oligomer (3200 Da) chains have not been observed in previous studies of condensed tannins. The spectra also indicated that A. mangium tannins are more heavily branched and have higher degree of polymerization (>7.0) compared to commercial mimosa (A. mearnsii) tannin (4.9). Because tannins are phenolic, it was expected that they can be used to replace phenol-formaldehyde (PF) adhesives.