共查询到20条相似文献,搜索用时 31 毫秒
1.
2.
3.
Luminescent Properties of a Silicone-Carbazolyl Polyfluorene Hybrid Material for Device Applications
Tatiana D. Martins Ines V. P. Yoshida Teresa D. Z. Atvars 《Macromolecular Symposia》2010,296(1):170-175
In the present work, bilayered hybrids obtained by hydrosilylation of polysiloxane with carbazolyl moieties (Sil-Cz) and polyfluorene (Sil-PFO) had their photophysical behavior, morphological characteristics and interaction properties studied for applications in electroluminescent devices. Fluorescence spectra of the Sil-Cz did not show emission in the excimer/aggregate region (from 400 to 500 nm). This is an unexpected behavior since most of the carbazole-based materials present excimer and aggregation. Nonetheless, this unusual observation was also predicted by geometry optimization calculations. Fluorescence spectra were taken for both compounds separately and for the bilayered system show some evidence of interaction between carbazolyl and polyfluorene moieties, giving rise to the supposition that the can form a system with tunable luminescent properties. 相似文献
4.
几种电致发光聚合物材料的研究进展 总被引:1,自引:0,他引:1
介绍了几种典型的电致发光聚合物材料,包括聚(对苯乙烯撑)及其衍生物、聚噻吩及其衍生物、聚芴及其衍生物,对它们的结构、制备方法、特点进行了归纳和讨论。其中最重要的是聚(对苯乙烯撑)(PPV)及其衍生物,目前采用较多的制备方法是前聚物法和强碱诱导的去卤缩合法以及电化学聚合法。在苯环上引入长链烷烃、烷氧基或芳基后的取代PPV,即PPV的衍生物,可溶于很多有机溶剂。可溶性PPV衍生物为制备多层电致发光聚合物器件提供了有效途径。文章还对电致发光聚合物材料存在的问题和发展前景进行了探讨和展望。 相似文献
5.
Oussama Boumezgane 《International Journal of Polymer Analysis and Characterization》2017,22(5):463-471
Poly(ethylene glycol) (PEG) blends photo-curable and thermal activated shape-memory polymers (SMPs), with different activation temperature (Tswitch), have been synthesized and characterized. PEG blends with different molecular weights were chain-end functionalized with isocyanate ethyl methacrylate and photo-cured with UV lamp. Degree of cross-linking of the blend network, determined by gel content measurement, resulted as higher than 95%. The thermal and thermomechanical properties of these SMPs PEG blends were characterized by differential scanning calorimetry and dynamic mechanical analysis. The shape-memory properties of the networks were quantified using thermomechanical three-point bending experiments and showed strain fixity rates higher than 99% and a minimum strain recovery ratio of 82%. 相似文献
6.
7.
8.
Chen Y El-Khouly ME Zhuang XD He N Araki Y Lin Y Ito O 《Chemistry (Weinheim an der Bergstrasse, Germany)》2007,13(6):1709-1714
The photoinduced electron-transfer process of a newly prepared, soluble, pi-conjugated poly[9,9-bis(4-diphenylaminophenyl)-2,7-fluorene] (PDPAF), covalently bridged, C60 triad (C60-PDPAF-C60) is described. The molecular orbital calculations revealed that the majority of the highest occupied molecular orbital (HOMO) is located on the polyfluorene entity, while the lowest unoccupied molecular orbitals (LUMO) are found to be entirely on the C60 entity. The excited-state electron-transfer processes were monitored by both steady-state and time-resolved emission as well as by transient absorption techniques in toluene and benzonitrile. By excitation of the polyfluorene moiety, fluorescence quenching of the singlet excited state of polyfluorene moiety was observed. The nanosecond transient spectra in near-IR region revealed the charge-separation process from the polyfluorene moieties to the C60 moiety through the excited singlet states of polyfluorene. The lifetimes of the charge separated states were evaluated to be 20-50 ns, depending on the solvent polarity. 相似文献
9.
De S Pascher T Maiti M Jespersen KG Kesti T Zhang F Inganäs O Yartsev A Sundström V 《Journal of the American Chemical Society》2007,129(27):8466-8472
By measuring excited state and charge dynamics in blends of an alternating polyfluorene copolymer and fullerene derivative over nine orders in time and two orders in light intensity, we have monitored the light-induced processes from ultrafast charge photogeneration to much slower decay of charges by recombination. We find that at low light intensities relevant to solar cell operation relatively fast (approximately 30 ns) geminate recombination is the dominating charge decay process, while nongeminate recombination has a negligible contribution. The conclusion of our work is that under solar illumination conditions geminate recombination of charges may be directly competing with efficient charge collection in polymer/fullerene solar cells. 相似文献
10.
José Roberto Tozoni Teresa Dib Zambon Atvars Leni Akcelrud Tito José Bonagamba 《European Polymer Journal》2009,45(8):2467-2477
A polyfluorene derivative of the PPV, poly(9,9′-n-dihexyl-2,7-fluorenedilvinylene-alt-1,4-phenylenevinylene), with a strong tendency to aggregation was blended with several members of a series composed by poly(alkyl methacrylate)s with the following substituents in the ester position: methyl, ethyl, isopropyl, isobutyl, n-butyl, and cyclohexyl. The de-aggregation effect in blends was studied by steady-state photoluminescence spectroscopy using several blend compositions. The efficiency of each dispersing phase was discussed in terms of the polymer miscibility, controlled by interaction parameters between the polyfluorene and every poly(alkyl methacrylate)s, here described using Hildebrand solubility parameters. 相似文献
11.
芴与噻吩发光共聚物的合成及其电致发光性能 总被引:9,自引:2,他引:9
采用Suzuki偶合方法合成出了一系列新型的 9,9 二辛基芴 (DOF)和噻吩 (Th)的共聚物 .其中 ,DOF与Th的投料比 (摩尔比 )分别为 95∶5 (PTF5 )、90∶1 0 (PTF1 0 )、85∶1 5 (PTF1 5 )、70∶3 0 (PTF3 0 )、5 0∶5 0 (PTF5 0 ) .所有的聚合物均可溶于常用的有机溶剂 ,如THF,CHCl3等 ,其分子量在 60 0 0~ 5 3 0 0 0之间 .当在聚芴主链中引入噻吩后 ,其发光波长发生了红移 ,最大发光波长由PTF5时的 490nm红移到PTF5 0时的 5 41nm .随着聚芴主链中噻吩含量的增加 ,最大电致发光和光致发光效率都逐渐降低 由这些聚合物所制得的器件 ,最大电致发光效率为PTF5和PTF1 0的 0 45 %.由此表明 ,在聚芴主链中引入少量的低带隙单体噻吩可以调节聚芴的发光颜色及发光效率 相似文献
12.
Rui Wang Wei‐Zhi Wang Gui‐Zhong Yang Tianxi Liu Junsheng Yu Yadong Jiang 《Journal of polymer science. Part A, Polymer chemistry》2008,46(3):790-802
Polyfluorene homopolymer ( P1 ) and its carbazole derivatives ( P2 – P4 ) have been prepared with good yield by Suzuki coupling polymerization. P2 is an alternating copolymer based on fluorene and carbazole; P3 is a hyperbranched polymer with carbazole derivative as the core and polyfluorene as the long arms; P4 is a hyperbranched polymer with carbazole derivative as the core and the alternating fluorene and carbazole as the long arms. These polymers show highly thermal stability, and their structures and physical properties are studied using gel permeation chromatography, 1H NMR, 13C NMR, elemental analysis, Fourier transform infrared spectroscopy, thermogravimetry, UV–vis absorption, photoluminescence, and cyclic voltammetry (CV). The influence of the incorporation of carbazole and the hyperbranched structures on the thermal, electrochemical, and electroluminescent properties has been investigated. Both carbazole addition and the hyperbranched structure increase the thermal and photoluminescent stability. The CV shows an increase of the HOMO energy levels for the derivatives, compared with polyfluorene homopolymer ( P1 ). The EL devices fabricated by these polymers exhibit pure blue‐light‐emitting with negligible low‐energy emission bands, indicating that the hyperbranched structure has a strong effect on the PLED characteristics. The results imply that incorporating carbazole into polyfluorene to form a hyperbranched structure is an efficient way to obtain highly stable blue‐light‐emitting conjugated polymers, and it is possible to adjust the property of light‐emitting polymers by the amount of carbazole derivative incorporated into the polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 790–802, 2008 相似文献
13.
In order to investigate the explicit optoelectronic variations of the photoluminescent polymer with sterically hindered side chains, three novel alternate polymers (P0, P1, and P2) based on fluorene and carbazole moieties were successfully synthesized through Suzuki coupling reaction. The molecular structures of the polymers were fully characterized by 1H‐NMR, 13C‐NMR, elemental analysis, and gel permeation chromatograph, respectively. The photophysical properties, thermal stability, and energy band gaps of polymers P0, P1, and P2 were further examined through UV–vis absorption, photoluminescent spectra, differential scanning calorimetry, thermogravimetric analysis, and cyclic voltammetry. The experimental results indicated that the polymers took on wide band gaps of about 3.50 eV with deep blue emission in thin solid films. These polymers were found to show a high thermal stability with decomposition temperatures at 5% weight loss of the compounds in the range of 353–416 °C. Blue light‐emitting electroluminescent devices of the most branched polymer P2 with highest light‐emitting efficiency as emitting layers were characterized, which showed obviously improved spectral stabilities with respect to the parent polyfluorene materials. In conclusion, we have established an effective method to improve the spectral stabilities of polyfluorene material by synthesizing the zigzag‐shaped copolymer of fluorene and carbazole with sterically hindered pendant moieties of different molecular sizes. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
14.
Hua Tan Junting Yu Jianhua Chen Kaixuan Nie Qing Chen Ying Huang Zhiyong Zhang Yafei Wang Yu Liu Gangtie Lei Weiguo Zhu 《Journal of polymer science. Part A, Polymer chemistry》2012,50(10):1900-1905
To study influence of the donor(D)‐acceptor(A) units and pendent mode of phosphorescent moiety on the opto‐electronic properties for its resulting copolymers, two D‐A‐based polyfluorene derivatives ( P 1 and P 2) pending the red‐emitting iridium bi(phenylisoquilonato) (picolinato) [Ir(Piq)2(pic)] unit and a polyfluorene derivative ( P 3) only pending Ir(Piq)2(pic) unit were synthesized and characterized, in which the donor of carbazole, the acceptor of oxadiazole are grafted into the C‐9 position of fluorene, the Ir(Piq)2(pic) unit is pended into either the C‐9 position for P 1 and P 3 or the end for P 2 of fluorene by unconjugated linkage, respectively. Their opto‐electronic properties were significantly influenced by the D‐A units and pendent mode of the Ir(Piq)2(pic) unit. In the polymer light‐emitting devices with a configuration of ITO/PEDOT/polymers/LiF/Al, the P 1 showed best electroluminescent properties than the P 2 and P 3. The maximum current efficiency of 0.72 cd/A and the highest luminance of 1398 cd/m 2 were obtained in the P 1‐based device, which are 1.3 and 1.5 times higher than those in the P 2‐based device, respectively. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012 相似文献
15.
Jing Sun Jian‐Gong Cheng Wen‐Qing Zhu Shi‐Jie Ren Hong‐Liang Zhong Dan‐Li Zeng Jun‐Ping Du Er‐Jian Xu Ying‐Chun Liu Qiang Fang 《Journal of polymer science. Part A, Polymer chemistry》2008,46(16):5616-5625
A new X‐shaped π‐conjugated monomer comprising of fluorene units and anthracene units was synthesized, and it was used to fabricate the new X‐shaped π‐conjugated polymers and investigate the properties of the new polymers. Using different molar ratios between such monomer and a fluorene monomer gave three polymers that showed higher absolute PL quantum yields than the linear polyfluorene (PF) in the solid state. After thermal annealing at 200 °C for 4 h, the linear PF showed an additional bathochromic emission at about 550 nm, whereas such red‐shifted emission was fully eliminated for the X‐shaped polymers. The electroluminescent devices based on the X‐shaped polymers with a configuration of ITO/PEDOT:PSS/polymer/LiF/Ca/Al displayed blue emission with low turn‐on voltage and high brightness. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5616–5625, 2008 相似文献
16.
We developed a sensitive spectroscopic method to probe triplet concentration in thin films of polyfluorene (PF) at room temperature. The energy of photoexcited triplet excitons is transferred to the guest metal-organic complex, meso-tetratolylporphyrin-Pd (PdTPP), and detected as phosphorescent emission. The phosphorescence intensity of PdTPP-PF blends is proportional to the independently measured triplet concentration using photoinduced absorption experiments. The high sensitivity of this method allows room temperature detection of triplet excitons in spin-coated polymer films as thin as 10 nm. We found that the triplet lifetime is independent of PdTPP concentration and therefore this method is nearly non-perturbing for the triplet population. 相似文献
17.
用密度泛函B3LYP方法对3,9-咔唑低聚物[(3,9-carbazole)n(n=1,2,3,4,6,8)]体系进行了全优化, 计算得到电离能、电子亲合势、空穴抽取能及电子抽取能等相关能量, 用ZINDO和TD-DFT方法计算得到吸收光谱; 分析了各种能量的变化及光谱规律. 用外推法由低聚物分子的各种性质与聚合度n相联系得到高聚物的性质, 将所得结果与2,7-咔唑(2,7-carbazole)及类似聚合物进行了比较分析. 结果表明, 3,9位聚合的咔唑整体共轭程度降低, 光谱蓝移, 其IP值和聚芴相近, 可以作为空穴接受材料应用于多层电子荧光器件的空穴传输层. 用CIS方法进行优化得到部分分子的S1激发态结构, 用ZINDO和TD-DFT方法得到对应的发射光谱. 相似文献
18.
为了改善聚芴的载流子注入特性,采用密度泛函理论B3LYP/6-31G*方法计算比较了芴、芴-联吡啶和芴-菲咯啉低聚物的几何结构、电子结构、最低激发能及重组能等,并外推到相应聚合物.结果发现:联吡啶/菲咯啉含氮芳杂环的缺电子性质能够诱导聚芴的最高占据轨道(HOMO)和最低空轨道(LUMO)能级分别下降0.45/0.47eV和0.32/0.38eV,提高电子注入能力的同时,调控载流子注入平衡;联吡啶单元的引入导致电子和空穴重组能升高(降低聚芴的载流子迁移率),而芴-菲咯啉共聚物显示了与聚芴相似的迁移性能. 相似文献
19.
20.
Huang F Hou L Wu H Wang X Shen H Cao W Yang W Cao Y 《Journal of the American Chemical Society》2004,126(31):9845-9853
A series of aminoalkyl-substituted polyfluorene copolymers with benzothiadiazole (BTDZ) of different content were synthesized by Suzuki coupling reaction, and their quaternized ammonium polyelectrolyte derivatives were obtained through a postpolymerization treatment on the terminal amino groups. Copolymers are soluble in environmentally friendlier solvents, such as alcohols. It was found that the efficient energy transfer occurs by exciton trapping on the narrow band gap BTDZ site under UV illumination. Only 1% of BTDZ content is needed to completely quench a fluorene emission for both the neutral and the quaternized copolymers in the neat film. Absolute PL efficiencies of copolymer films were greatly enhanced as a result of the suppression of excimer formation. Light-emitting devices fabricated from these copolymers show high external quantum efficiencies over 3% and 1% for the neutral precursor and the quaternized copolymers, respectively, with high work function metals such as Al as a cathode. To the best of our knowledge, this is the first report on an electroluminescent polymer which bears the high EL efficiency, the electron-injection ability from high work function metals, and the solubility in environment-friendly solvents at the same time. These features make them a promising candidate for the next generation of light-emitting copolymers in PLED flat panel display application. 相似文献