XNBR/LDH nanocomposites: Effect of vulcanization and organic modifier on nanofiller dispersion and strain‐induced crystallization

In elastomer/organo clay nanocomposites, the morphological characteristics, and hence the mechanical properties, of the vulcanizates are strongly influenced by the organic modifier and the vulcanization process. When the elastomer itself undergoes strain‐induced crystallization, both the organic modifier and the dispersed filler particles could significantly influence the crystallization process. These phenomena are very common in case of natural rubber‐based vulcanizates. In this study, the similar effects have been demonstrated with carboxylated nitrile rubber (XNBR) and organically modified layered double hydroxide (O‐LDH)‐based nanocomposites. The effect of size of the organic modifier was obviously visible on the interlayer distance of O‐LDH and also on the morphological reorganization of the dispersed O‐LDH particles during vulcanization process. The strain‐induced crystallization of the XNBR was found to be strongly dependent on the morphological change that occurs during vulcanization process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Nanoalloy Based on Clays: Intercalated‐Exfoliated Layered Silicate in High Performance Elastomer

A novel method is described for the preparation of nanocomposites comprising a high performance rubber for tire application and layered silicates clay. In this work nanocomposites of solution‐styrene butadiene rubber (S‐SBR) with montmorillonite layered silicate were prepared with carboxylated nitrile rubber (XNBR), a polar rubber, as a compatibilizer. A sufficient amount of organomodified layered silicate was loaded in carboxylated nitrile rubber (XNBR) and this compound was blended as a master batch in the S‐SBR. Mixed intercalated/exfoliated morphologies in the nanocomposite are evinced by X‐ray diffraction measurements and transmission electron microscopy. Dynamic mechanical analysis also supports the compatibility of the composites. A good dispersion of the layered silicate in the S‐SBR matrix was reflected from the physical properties of the nanocomposites, especially in terms of tensile strength and high elongation properties.     

Morphological,rheological, and mechanical properties of ethylene propylene diene monomer/carboxylated styrene-butadiene rubber/multiwall carbon nanotube nanocomposites

Abstract

A hybrid nanocomposite based on ethylene propylene diene monomer/carboxylated styrene-butadiene rubber (EPDM/XSBR) blend with different concentrations (0–7 phr) of multiwall carbon nanotube (MWCNT) was prepared on a two-roll mill. The role of grafted maleic anhydride (EPDM-g-MA) as compatibilizer and the effect of different concentrations of MWCNT on mechanical properties, morphology, rheological and curing characteristics of nanocomposites were investigated. The curing behavior of the prepared nanocomposites was studied using a rheometer. Also, the microstructure of nanocomposites was observed using TEM. By increasing the MWCNT concentration in the compatible blends, the curing time and scorch time of the blends decreased, while the maximum and minimum torque increased. Failure surface morphology studies showed that the existence of EPDM-g-MAH compatibilizer improved the distribution of MWCNT within the polymer matrix and uniform distribution of MWCNT with a small amount of aggregation was obtained. On the other hand, the presence of MWCNT in the matrix led to a sharper surface of the fracture. Also, mechanical properties such as modulus, tensile strength, hardness, fatigue, resilience and elongation-at-break for compatible EPDM/XSBR nanocomposite showed better results than those for incompatible composite.     

Effects of curing agents and modified graphene oxide on the properties of XNBR composites

This paper investigates the effects of crosslinking methods on the incorporation of graphene oxide (GO) in carboxylated nitrile butadiene rubber (XNBR) in the process of producing nanocomposites for chemical-resistant protective clothing and gloves. The novel aspect of the study is a comprehensive approach involving both unmodified GO as well as GO that was carboxylated to increase its affinity to XNBR and to facilitate its application. The nanostructure of XNBR composites was characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Fourier transform infrared spectroscopy (FTIR) was used to elucidate the chemical structure of the composites. Thermal stability studies were performed using differential scanning calorimetry (DSC). The barrier properties of the composites were determined based on swelling, crosslinking density, and permeation by mineral oils. The mechanical tests included resistance to puncture and abrasion, stress at strain, and tensile strength. Contact angle was measured to determine the degree of hydrophobicity of the obtained composites.AFM and SEM images revealed the effects of different curing agents (sulfur, magnesium oxide, or a hybrid system) as well as GO type on the surface morphology of XNBR composites. The type of curing agent was found to affect the kind of crosslinks formed and their spatial network structure, as confirmed by FTIR. The DSC curves showed that the crosslinking methods of XNBR did not affect glass transition temperature, but led to large changes observed in the temperature range of 130–220 °C.The type of crosslinking method affected the degree of swelling. It was found that the incorporation of carbon nanofillers led to an improvement in the abrasion and puncture resistance as well as tensile strength of XNBR composites. The water contact angle of the composites indicated hydrophobicity. The properties of XNBR composites containing GO revealed their substantial application potential in protective clothing.     

Curing and mechanical behavior of carboxylated NBR containing hygrothermally decomposed polyurethane

Hygrothermally decomposed polyester-urethane (HD-PUR) has been added as modifier (up to 20 phr) to sulfur crosslinked carboxylated nitrile rubber (XNBR). The curing and mechanical characteristics of the XNBR have been investigated as a function of the HD-PUR loading in presence and absence of carbon black (CB). The addition of HD-PUR increased the cure rate of both unfilled and CB filled XNBR but resulted in compounds of lower crosslink density and thus of lower stiffness and strength. Based on infrared spectroscopic results it was speculated that the amine functionality of HD-PUR affected the formation of the ionic clusters formed by the reaction between the -COOH groups of XNBR and ZnO. This occurred likely via a coordination complex. Evidence was also found for the formation of -CONH- linkages. Both coordination complexing and chemical reaction between -COOH and -NH₂ resulted in a lower overall “crosslinking degree” and as a consequence HD-PUR acted as plasticizer in XNBR.     

Reinforcement effect of MAA on nano‐CaCo3‐filled EPDM vulcanizates and possible mechanism

Methacrylic acid (MAA) was used as in situ surface modifier to improve the interface interaction between nano‐CaCO₃ particle and ethylene–propylene–diene monomer (EPDM) matrix, and hence the mechanical properties of nano‐CaCO₃‐filled EPDM vulcanizates. The results showed that the incorporation of MAA improved the filler–matrix interaction, which was proved by Fourier transformation infrared spectrometer (FTIR), Kraus equation, crosslink density determination, and scanning electron microscope (SEM). The formation of carboxylate and the participation of MAA in the crosslinking of EPDM indicated the strong filler–matrix interaction from the aspect of chemical reaction. The results of Kraus equation showed that the presence of MAA enhanced the reinforcement extent of nano‐CaCO₃ on EPDM vulcanizates. Crosslink density determination proved the formation of the ionic crosslinks in EPDM vulcanizates with the existence of MAA. The filler particles on tensile fracture were embedded in the matrix and could not be observed obviously, indicating that a strong interfacial interaction between the filler and the matrix had been achieved with the incorporation of MAA. Meanwhile, the presence of MAA remarkably increased the modulus and tensile strength of the vulcanizates, without negative effect on the high elongation at break. Furthermore, the ionic bond was thought to be formed only on filler surface because of the absolute deficiency of MAA, which resulted in the possible structure where filler particles were considered as crosslink points. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1226–1236, 2006     

Toughening of poly(2,6-dimethyl-1,4-phenylene oxide)/nylon 6 alloys with functionalized elastomers via reactive compatibilization: morphology, mechanical properties, and rheology

Blends of poly(2,6-dimethyl-1,4-phenylene oxide)/nylon 6 alloys based on ethylene-propylene-diene elastomer (EPDM) grafted with maleic anhydride (MA) (EPDM-g-MA), EPDM grafted with glycidyl methacrylate (EPDM-g-GMA), and styrene-ethylene-butadiene-styrene block copolymer grafted with MA (SEBS-g-MA) were prepared via melt extruction, and morphology, mechanical properties, and rheology were studied. The compatibilizing effects of functionalized elastomers on the PPO/nylon 6 alloys were proved by DSC analysis and confirmed by the significant improvement in the notched Izod impact strength. Toughening was resulted from the smaller particle size and finer dispersion of EPDM in the PPO/nylon 6 matrix as well as a novel network structure of SEBS-g-MA domain in matrix. The notched Izod impact strength of the blends exhibited an optimum value when the extent of MA or GMA graft ratio of EPDM varied, which was an order of magnitude higher than the non-toughened alloys. The morphology revealed that the size of EPDM particles decreased with an increase in graft ratio of MA or GMA onto EPDM. Rheology investigation indicated that the MA or GMA moieties on EPDM reacted with the amine groups of nylon 6, which increased the molecular weight and the degree of branching, and thus resulted in an increase in the viscosity of the blends. This proved the reactive compatibilization between functionalized EPDM and PPO/nylon 6 matrix.     

PP/EPDM/CaCO_3三元复合材料的相结构及力学性能研究

采用以化学键合方式在CaCO3表面包覆上聚丙烯蜡和将改性后的CaCO3先与EPDM复合、再与PP复合的工艺,制备PP/EPDM/CaCO3三元复合材料,以期在PP基体材料中得到EPDM包裹CaCO3的相结构.通过测量三元复合体系中各组分的表面张力,计算各可能组分对之间的界面张力和黏结功,分析三元复合体系中可能的相结构.热力学计算结果表明,三元复合体系中既存在以EPDM为壳、CaCO3为核的"核壳结构",又存在CaCO3与EPDM各自独立分散在PP基体中的结构.电镜照片进一步揭示,在PP/EPDM/改性CaCO3三元复合体系与PP/EPDM/未改性CaCO3三元复合体系中,这两种相结构的比例是不同的,在前者中以核壳结构为主.CaCO3表面性质的不同是产生这一差别的原因.由于这一结构差别的存在,PP/EPDM/改性CaCO3三元复合体系比PP/EPDM/未改性CaCO3三元复合体系具有更好的力学性能.当EPDM用量为8 phr、改性CaCO3用量为15 phr时,三元复合体系的冲击强度达14.25 kJ/m2,是纯PP的3.17倍.     

Optimization of organo‐layered double hydroxide dispersion in LDPE‐based nanocomposites

Low‐density polyethylene/layered double hydroxide (LDPE/LDH) nanocomposites were prepared via melt extrusion using organo‐LDH particles and maleic anhydride functionalized polyethylene as compatibilizer. Processing parameters, preparation method, and feed composition were properly modulated until obtaining nanocomposites with intercalated/exfoliated morphologies, and an uniform distribution of nanolayers, as evidenced by X‐ray diffraction and transmission electron microscopy analysis. These materials showed a significant improvement of the thermal‐oxidative stability, which increased of about 50°C during the first step of the degradation process. Moreover, a remarkable reduction of the oxygen permeability, proportional to the aspect ratio of LDH stacks dispersed in the polyolefin matrix was evidenced, indicating the possible application of nanocomposite films as food packaging materials. As highlighted by dynamic mechanical thermal analysis, interactions at the interface between LDH layers and polymer chains caused a shift of the LDPE β‐relaxation toward higher temperatures and a reduction of the peak intensity with respect to the matrix. It was also found that the storage modulus of the nanocomposites was lower in all the temperature range with respect to the reference samples. Finally, on‐line capillary rheometer measurements evidenced that the shear thinning behavior of the nanocomposites was dominated by the matrix so that the melt processability was not compromised by the presence of the filler. Copyright © 2010 John Wiley & Sons, Ltd.     

A Novel Thermotropic Elastomer based on Highly‐filled LDH‐SSB Composites

Elastomeric composites are prepared based on solution styrene butadiene elastomer and zinc‐aluminium layered double hydroxides (LDH), using a conventional sulphur cure system. Up to 100 parts per hundred rubber of LDH are incorporated into the elastomer matrix. The composites exhibit an interesting phenomenon of thermoreversible transparency, i.e. the transparent sample becomes opaque at warm condition and restores the transparency at room temperature. The transparency is found to be increased as the amount of LDH was increased. The addition of LDH gradually improved the mechanical, dynamic mechanical performance and thermal stability of the base elastomer. These developped elastomers could be utilised as smart materials in different applications.     

Effect of montmorillonite on structure and properties of nanocomposite with PA6/PS/elastomer matrix

Polyamide nanocomposites with fair balance of mechanical properties were recently obtained by addition of finely dispersed clay-compatibilized rubber or rigid PS phase. This work deals with combination of both components, which recently led also to enhanced mechanical behaviour in an analogous reactively compatibilized ternary system.Application of clay to PA6/PS/EPR matrix leads to a decrease in particle size analogously to corresponding binary blends, but the effect of clay on toughness is predominantly contradictory, i.e., a decrease with increasing clay content was found. Also the toughening effect of formed core-shell (elastomer/clay) particles is lower in comparison with binary PA6/EPR. At the same time, in contrast to the PA/PS system, the presence of core-shell particles formed by PS/C15 preblending leads to fair mechanical behaviour including enhanced toughness. This documents a complex affecting of the system behaviour by clay and the expected synergistic cooperation of numerous clay-induced changes in both component parameters and structure. The obtained results indicate that a proper combination of rigid and elastomeric inclusions can lead to nanocomposites with balanced and enhanced mechanical behaviour.     

Synergistic effects of layered double hydroxide with phosphorus-nitrogen intumescent flame retardant in PP/EPDM/IFR/LDH nanocomposites

<正>Synergistic effects of layered double hydroxide(LDH) with intumescent flame retardanct(IFR) of phosphorus-nitrogen (NP) compound in the polypropylene/ethylene-propylene-diene/IFR/LDH(PP/EPDM/IFR/LDH) nanocomposites and related properties were studied by X-ray diffraction(XRD),transmission electron microscopy(TEM),scanning electron microscopy(SEM),limiting oxygen index(LOI),UL-94 test,cone calorimeter test(CCT) and thermo-gravimetric analysis (TGA).The XRD and TEM results show that the intercalated and/or exfoliated nanocomposites can be obtained by direct melt-intercalation of PP/EPDM into modified LDH and that LDH can promote the IFR additive NP to disperse more homogeneously in the polymer matrix.The SEM results provide positive evidence that more compact charred layers can be obtained from the PP/EPDM/NP/LDH sample than those from the PP/EPDM/LDH and PP/EPDM/NP samples during burning.The LOI and UL-94 rating tests show that the synergetic effects of LDH with NP can effectively increase the flame retardant properties of the PP/EPDM/NP/LDH samples.The data from the CCT and TGA tests indicate that the PP/EPDM/NP/LDH samples apparently decrease the HRR and MLR values and thus enhance the flame retardant properties and have better thermal stability than the PP/EPDM/LDH and PP/EPDM/NP samples.     

Characterization of kaolinite/emulsion-polymerization styrene butadiene rubber (ESBR) nanocomposite prepared by latex blending method: Dynamic mechanic properties and mechanism

The latex blending method was chosen to prepare Kaolinite/emulsion-polymerization styrene butadiene rubber (ESBR) nanocomposite to improve the interaction between filler particles and rubber matrix chains. The influences of kaolinite particles size, filler contents, and flocculants types on dynamic mechanical properties and the relative reinforcement mechanism of the prepared composite were systematic investigated and proposed. The transmission electron microscopy (TEM) and scanning electron microscopy (SEM) showed that the kaolinite particles were finely dispersed into the rubber matrix and arranged in parallel orientation. The prepared nanocomposites by latex blending exhibited improved crosslinking characteristic and dynamic mechanical parameters. The KAl (SO₄)₂ flocculant presented obvious modification in dynamic properties and crosslinking characteristic. Both the decrease in kaolinite particle size and the increase in kaolinite content can greatly improve the storage modulus and reinforcing effect of kaolinite/ESBR nanocomposites. The dynamic reinforcement mechanism of kaolinite can be explained by filler network including a certain thickness of rubber shell on the surface of kaolinite lamellar structure and the aggregations network between kaolinite particles The optimum way to balance the dynamic properties of rubber nanocomposites at different temperatures is to reduce the surface difference between kaolinite and rubber matrix and the degree of filler-filler networking on the basis of kaolinite with nanoscale (nanometer effect).     

EPDM/PP热塑性弹性体在循环应力下的老化行为研究

本文研究了动态硫化EPDM/PP热塑性弹性体的动态疲劳老化行为,考察了其力学性能的变化,并分析了产生力学性能下降的原因。实验结果表明,随着疲劳时间的延长、疲劳振幅的增大,材料的断裂强度降低,并认为疲劳过程中完全硫化的EPDM橡胶粒子和热塑性塑料PP界面处的分子链断裂、滑移导致了断裂强度的降低;紫外光的加入,加速了材料在疲劳过程的分子链断裂、滑移速率,使材料的断裂强度有更大程度的降低;在机械疲劳老化单独作用下,材料体系几乎没有发生氧化反应,而紫外光的加入,促使了机械疲劳老化过程中氧化反应的发生。     

Effect of dendrimer modified montmorillonite on structure and properties of EPDM nanocomposites

The purpose of this work was to study the effect of dendrimer modified clay minerals on the structure and properties of ethylene-propylene-diene monomer (EPDM) nanocomposites.Flame-retardant and dendrimer modified organic montmorillonite (FR-DOMt) was successfully prepared by Na⁺-montmorillonite, tetrahydroxymethyl phosphonium chloride (THPC), N, N-dihydroxyl-3-aminomethyl propionate, and boric acid. This dendritic type of organoclay (OC) was used in preparation of EPDM/FR-DOMt nanocomposites. The properties of these nanocomposites were studied. The dispersion status of the layered silicates in EPDM was revealed by X-ray diffractometer (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). XRD and TEM results showed that FR-DOMt was exfoliated in the EPDM matrix when 10 phr of FR-DOMt was incorporated. The mechanical behavior, thermal stability, and flame retardance of the samples were examined. The experimental data demonstrated that the EPDM hybrids owned an improved tensile strength and elongation at break. In addition, the nanocomposites exhibited higher thermal stability and flame retardance than that of unfilled EPDM matrix.     

Effects of nucleating agents on microstructure and fracture toughness of poly(propylene)/ethylene‐propylene‐diene terpolymer blends

The effects of nucleating agents (NAs) on fracture toughness of injection‐molded isotactic poly(propylene)/ethylene‐propylene‐diene terpolymer (PP/EPDM) were studied in this work. Compared with PP/EPDM blends without any NA, PP/EPDM/NA blends show very small and homogeneous PP spherulites. As we expected, PP/EPDM blends nucleated with β‐phase NA aryl amides compound (TMB‐5) present not only a significant enhancement in toughness but also a promotion of brittle‐ductile transition. However, the addition of α‐phase NA 1,3:2,4‐bis(3,4‐dimethylbenzylidene) sorbitol (DMDBS) has no apparent effect on the toughness of the blends. The impact‐fractured surface morphologies of such samples were analyzed via scanning electronic microscope (SEM). More detail work about the toughening mechanisms of elastomer and NA based on elastomer particles size and matrix crystal structures were carried out. Our results suggest that, besides the crystal structures of matrix, the elastomer particles size and size distribution plays an important role in controlling the toughening effect of nucleated PP/elastomer blends. The smaller the elastomer particles size and lower the polydispersity, the more apparent the synergistic toughening effect of NA and elastomer is. This investigation provides a fresh insight into the understanding of toughening mechanism of elastomers in PP blends and facilitates to the design of super toughened PP materials. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 46–59, 2009     

Thermal properties and combustibility of cross-linked XNBR/CSM blends

The article describes the measurement results of the thermal properties of cross-linked blends of carboxylated butadiene-acrylonitrile rubber (XNBR, Krynac X.7.50) and chlorosulfonated polyethylene (CSM, Hypalon 48) under inert gas (DSC, TG) and in air (derivatography). The blends were cross linked at a temperature of 150 °C by means of MgO in the presence of stearic acid. The thermal curves were interpreted from the point of view of phase transitions and chemical reactions of high-molecular components. It has been found that the polymers under investigation show a good compatibility resulting from the presence of both inter-polymeric covalent bonds and inter-polymeric ionic bridges containing magnesium ions that fulfill the role of chemical compatibilizer. The study has shown that XNBR/CSM blends belong to a group of polymeric materials that are self-extinguished in air. Their flammability, determined by OI and the combustion time in air, clearly depends on the cross-linking degree associated with the quantity of MgO incorporated into the blend of elastomers.     

三元乙丙橡胶/尼龙高性能弹性体结构与性能的研究

通过DSC、DMA、TEM及SEM研究了三元乙丙橡胶 /尼龙 (EPDM /PA)共混物结构与性能 ,按照各级结构形态的特点 ,可大致分为三个层次的结构 :初级结构即氯化聚乙烯 (CPE)锚入或镶嵌在PA中形成分散相颗粒中的结构 ;中级结构指分散颗粒在基体中的采取的微纤状形态 ;高级结构是外力作用下共混物形成的由一定数量微纤组成的可传递应力的聚集体结构 .这种多层次结构决定了共混体系兼具EPDM与PA的优点 ,综合性能优异 .物理机械性能及热氧老化性能比较表明 ,PA改性的EPDM是理想的高性能弹性体     

Study on Dynamic Vulcanized EPDM/PP Thermoplastic Elastomer

Based upon the THE,HAAK RHEOCORD 90 and Wx-ray observation,a study was made on the structure and property of ethylene-propylene-ethlidene norborene (EPDM)/polyprolene (PP) blending systems ,and the experimental results were fully explained. (1) The effect of Mooney viscosity (ML)of EPDM、 melt flow rate(MFR) of peroxide(DCP) and mixing steps on mechanical properties of EPDM/PP blends was studied. The results showed that the mechanical and process properties of EPDM?PP thermoplastic elastomers were better using EPDM with the ML of 60 and PP with MFR of 7.5g/10min as matrix,DCP with the content of 1.2 per cent with the help of twostep curing process at the temperature of 170-175 ℃.     

Polypropylene/layered double hydroxide nanocomposites: Synergistic effect of designed filler modification and compatibilizing agent on the morphology,thermal, and mechanical properties

This work addresses the optimization of the morphology, thermal, and mechanical properties of polypropylene/layered double hydroxide (LDH) nanocomposites. For this, the nanofillers were modified by a calcination rehydration process using two surfactants, sodium dodecylsulfate (SDS) and sodium dodecylbenzenesulfonate, respectively. The nanofillers were characterized at each step of the modification process by thermal gravimetry, X‐ray diffraction, and Infra red spectroscopy. Furthermore, the impact of anionic modifiers on the filler surface energy and on the interactions toward water was analyzed. Polypropylene (PP)/LDH nanocomposites were then prepared by a melt intercalation process and a high molar mass maleic anhydride functionalized polypropylene (PPgMA) was introduced as a compatibilizer. The dispersion of LDH in the PP matrix was characterized and the thermal and mechanical properties of the corresponding nanocomposites were determined and discussed as a function of the filler modification, of the nanocomposite morphology, and of the filler/matrix interfacial properties. The nanocomposites prepared from SDS modified LDH and PPgMA exhibited superior properties thanks to an optimized filler dispersion state and improved interfacial interactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 782–794