Surface characterization of poly(2,2,3,3,3-pentafluoropropyl methacrylate) by inverse gas chromatography and contact angle measurements

A fluorinated methacrylic homopolymer, poly(2,2,3,3,3-pentafluoropropyl methacrylate) (PPFPMA) was synthesized by a free radical polymerization reaction. The dispersive component of the surface energy () of PPFPMA was determined by contact angle measurements and inverse gas chromatography (IGC). An extensive surface characterization was conducted by means of IGC. Surface characterization demonstrated that PPFPMA has low value, even at 35 °C and is a Lewis amphoteric polymer with predominantly basic character, as confirmed by the Lewis acidity and basicity constants K_A and K_B, respectively. The values of obtained by IGC are slightly higher than those obtained by the contact angle method. This trend can be attributed to the fact that IGC evaluates, primarily, high energy sites of a surface.     

Synthesis and biological activity of medium molecular weight polymers of camptothecin

A new monomer, 3,6-endo-methylene-1,2,3,6-tetrahydrophthalimidohexanoylcamptothecin (ETHCPT) was synthesized from 3,6-endo-methylene-1,2,3,6-tetrahydrophthalimidohexanoic acid. Its homopolymer and copolymer with acrylic acid (AA) were synthesized and spectroscopically characterized. The ETHCPT content in poly(ETHCPT-co-AA) obtained by elemental analysis was 37 wt.%. The number-average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n=9700 for poly(ETHCPT), for poly(ETHCPT-co-AA). The IC₅₀ value of ETHCPT and its polymers against cancer cells was much larger than that of CPT. The in vivo antitumor activity of all polymers in Balb/C mice bearing the sarcoma 180 tumor cell line was greater than that of CPT at a dose of 100 mg/kg.     

PbI4Cu2(PPh3)4: A heterometallic iodide with unusual cis-divacant octahedral coordination sphere for lead: Synthesis, structure, red-infrared fluorescence and theoretical studies

A new heterometallic iodide, PbI₄Cu₂(PPh₃)₄, was synthesized by reactions of PbI₂, CuI and triphenylphosphine (PPh₃) in DMF solution. The single-crystal X-ray diffraction analyses show that Pb(II) center adopts an unusual cis-divacant octahedral geometry. Crystal data: triclinic, space group , , , , α=106.623(4)°, β=103.478(6)°, γ=93.574(5)°, and Z=2. Density function theory (DFT) calculations and fragment orbital interaction analyses reveal the presence of a three-center four-electron (3c-4e) hypervalent bonding about lead; and the formation of the unusual cis-divacant [PbI₄]²⁻ octahedron is energetically favorable. The title yellow compound has an optical bandgap of 2.69 eV and shows remarkable red-infrared fluorescence emission at 732 nm with lifetime of 24 μs which is assigned as an iodine 5p-lead 6s to PPh₃-lead 6p charge transfer (XM-LM-CT).     

Crystal structure of cobalt molybdate hydrate CoMoO4·nH2O

We have determined the crystal structure of the title compound, which has a triclinic cell with cell parameters of , , , α=76.617°, β=84.188°, γ=74.510° and space group . The crystal structure suggests the chemical formula CoMoO₄·3/4H₂O. The structure consists of MoO₄ tetrahedra and CoO₆ octahedra, confirming the earlier X-ray absorption near-edge spectroscopic (XANES) investigation on the hydrate. The comparison of the crystal structures of the hydrate and the α-,β-, and hp-phases shows that the hydrate exhibits metal cation coordinations similar to those of the β-phase, but had arrangements of CoO₆ and MoO_n polyhedra similar to those of the hp-phase.     

Synthesis of natural rubber-based telechelic cis-1,4-polyisoprenes and their use to prepare block copolymers via RAFT polymerization

A new trithiocarbonate functionalized cis-1,4-polyisoprene was obtained from oxidative degradation of natural rubber followed by reductive amination and amidation. The structure of the resulting functionalized cis-1,4-polyisoprene was confirmed by a combination of ¹H NMR spectroscopy, ¹³C NMR spectroscopy, MALDI-TOF mass spectrometry and FTIR spectroscopy. ¹H NMR spectroscopy showed that the trithiocarbonate functionality was equal to one. The well-defined trithiocarbonyl-end functionalized cis-1,4-polyisoprene was used as a macromolecular chain transfer agent (macroCTA) to mediate the RAFT polymerization of t-BA using AIBN as the initiator ([t-BA]₀/[macroCTA]₀/[AIBN]₀ = 250/1/0.2) in toluene at 60 °C. The resulting PI-b-P(t-BA) diblock copolymer presents an unimodal SEC trace shifted toward higher molecular weight in comparison with the SEC trace of the macroCTA, indicating that the polymerization of the second block is effective. The characteristics of the copolymer were determined by SEC = 26,000 g mol⁻¹, PDI = 1.76) and ¹H NMR spectroscopy ( (PI) = 62 and (P(t-BA)) = 87).     

The disordered structures and low temperature dielectric relaxation properties of two misplaced-displacive cubic pyrochlores found in the Bi2O3-MO-Nb2O5 (M=Mg, Ni) systems

The disordered structures and low temperature dielectric relaxation properties of Bi_1.667Mg_0.70Nb_1.52O₇ (BMN) and Bi_1.67Ni_0.75Nb_1.50O₇ (BNN) misplaced-displacive cubic pyrochlores found in the Bi₂O₃-M^IIO-Nb₂O₅ (M=Mg, Ni) systems are reported. As for other recently reported Bi-pyrochlores, the metal ion vacancies are found to be confined to the pyrochlore A site. The B₂O₆ octahedral sub-structure is found to be fully occupied and well-ordered. Considerable displacive disorder, however, is found associated with the O′A₂ tetrahedral sub-structure in both cases. The A-site ions were displaced from Wyckoff position 16d (, , ) to 96 h (, , ) while the O′ oxygen was shifted from position 8b (, , ) to Wyckoff position 32e (, , ). The refined displacement magnitudes off the 16d and 8b sites for the A and O′ sites were 0.408 Å/0.423 Å and 0.350 Å/0.369 Å for BMN/BNN, respectively.     

Synthesis of N-alkylimidazolium salts and their utility as solvents in the Beckmann rearrangement

Six different room temperature ionic liquids (RTILs) based on N-methyl or N-isopropyl imidazolium cations with counteranions, such as , , and OTf⁻, have been synthesized by exchanging the counteranions of the corresponding N-methyl or N-isopropylimidazolium bromides using appropriate salts such as NH₄BF₄, KPF₆, and AgOTf. Catalytic amounts of these ionic liquids (ILs) have been used as the reaction medium for the Beckmann rearrangement of oximes to amides in the presence of PCl₅. A moderate to good conversion of oximes to amides in all the six ILs was observed.     

The crystal chemistry of L-Ta2O5 and related structures

Single crystals of a new form of L-Ta₂O₅ with a 19×b superstructure have been synthesised by flux growth. The phase is most likely stabilised by the incorporation of a small amount of lithium (0.14 wt% Li) from the flux. The phase has C-centred monoclinic symmetry with , (), , γ=90.00(1)°. The structure was refined in space group C112/m to R₁=0.044 for 814 unique reflections with F>4σ(F). The structure can be described as comprising chains of edge-shared TaO₇ pentagonal bipyramids that are regularly folded at (010) planes to give sinusoidal chains along [010]. These chains are interconnected along [100] and [001] by corner sharing, creating inter-chain regions that are occupied by isolated TaO₆ octahedra and pairs of corner-shared octahedra. A comparison with published data for high-quality refinements of related structures has led to the development of a general model that can explain the structural chemistry variations in the known L-Ta₂O₅-related structures. A shorthand notation is presented for representing the structures, based on the sequence along [010] of the interchain octahedra.     

Synthesis and characterization of the rare-earth dicyanamides Ln[N(CN)2]3 with Ln=La, Ce, Pr, Nd, Sm, and Eu

The rare-earth dicyanamides Ln[N(CN)₂]₃ (Ln=La, Ce, Pr, Nd, Sm, Eu) were obtained via ion exchange in aqueous medium and subsequent drying: The crystal structures were solved and refined based on X-ray powder diffraction data and they were found to be isotypic: Ln[N(CN)₂]₃; Cmcm (no. 63), Z=4, Ln=La: , , ; Ce: , , ; Pr: , , ; Nd: , , ; Sm: , , ; Eu: , , ). The compounds represent the first dicyanamides with trivalent cations. The Ln³⁺ ions are coordinated by three bridging N atoms and six terminal N atoms of the dicyanamide ions forming a three capped trigonal prism. The structure type is related to that of PuBr₃. The novel compounds Ln[N(CN)₂]₃ have been characterized by IR and Raman spectroscopy (Ln=La) and the thermal behavior has been monitored by differential scanning calorimetry (Ln=Ce, Nd, Eu).     

An open-framework three-dimensional indium oxalate: [In(OH)(C2O4)(H2O)]3·H2O

By hydrothermal reaction of In₂O₃ with H₂C₂O₄·2H₂O in the presence of H₃BO₃ at 155 °C, an open-framework three-dimensional indium oxalate of formula [In(OH)(C₂O₄)(H₂O)]₃·H₂O (1) has been obtained. The compound crystallizes in the trigonal system, space group R3c with , , , Z=6, R₁=0.0352 at 298 K. The small pores in 1 are filled with water molecules. It loses its filled water at about 180 °C without the change of structure, then the bounded water at 260 °C, and completely decompounds at 324 °C. The residue is confirmed to be In₂O₃.     

The crystal structure determinations and refinements of K2S2O7, KNaS2O7 and Na2S2O7 from X-ray powder and single crystal diffraction data

The crystal structures of K₂S₂O₇, KNaS₂O₇ and Na₂S₂O₇ have been solved and/or refined from X-ray synchrotron powder diffraction data and conventional single-crystal data. K₂S₂O₇: From powder diffraction data, monoclinic C2/c, Z=4, a=12.3653(2), b=7.3122(1), , β=93.0792(7)°, R_Bragg=0.096. KNaS₂O₇: From powder diffraction data; triclinic , Z=2, a=5.90476(9), b=7.2008(1), , α=101.7074(9), β=90.6960(7), γ=94.2403(9)°, R_Bragg=0.075. Na₂S₂O₇: From single-crystal data; triclinic , Z=2, a=6.7702(9), b=6.7975(10), , α=116.779(2), β=96.089(3), γ=84.000(3)°, R_F=0.033. The disulphate anions are essentially eclipsed. All three structures can be described as dichromate-like, where the alkali cations coordinate oxygens of the isolated disulphate groups in three-dimensional networks. The K-O and Na-O coordinations were determined from electron density topology and coordination geometry. The three structures have a cation-disulphate chain in common. In K₂S₂O₇ and Na₂S₂O₇ the neighbouring chains are antiparallel, while in KNaS₂O₇ the chains are parallel. The differences between the K₂S₂O₇ and Na₂S₂O₇ structures, with double-, respectively single-sided chain connections and straight, respectively, corrugated structural layers can be understood in terms of the differences in size and coordinating ability of the cations.     

Synthesis, crystal structure and vibrational spectra characterization of MLa(PO3)4 (M=Na, Ag)

The single crystals of lanthanum metaphosphate MLa(PO₃)₄ (M=Na, Ag) have been synthesized and studied by a combination of X-ray crystal diffraction and vibrational spectroscopy. The sodium and silver compounds crystallize in the same monoclinic P2₁/n space group ( factor group) with the following respective unit cell dimensions: a=7.255(2), b=13.186(3), , β=90.40(2)°, , Z=4 and a=7.300(5), b=13.211(9), , β=90.47(4)°, , Z=4. This three-dimensional framework is built of twisted zig-zag chains running along a direction and made up of PO₄ tetrahedra sharing two corners, connected to the LaO₈ and NaO₇ or AgO₇ polyhedra by common oxygen atoms to the chains. The infrared and Raman vibrational spectra have been investigated. A group factor analysis leads to the determination of internal modes of (PO₃)⁻ anion in the phosphate chain.