Hybridization of poly(4-vinyl pyridine)-b-polystyrene-b-poly(4-vinyl pyridine) aggregates in dioxane/water solution

Self-assembly of binary blends of two triblock copolymers of poly(4-vinyl pyridine)-b-polystyrene-b-poly(4-vinyl pyridine), i.e., P4VP₄₃-b-PS₂₆₀-b-P4VP₄₃ (P1) and P4VP₄₃-b-PS₃₆₆-b-P4VP₄₃ (P2), in dioxane/water solution was studied. These two triblock copolymers individually tend to form vesicles (P2) and cylindrical micelles (P1) in dilute solution. It was found that copolymer components in the blend, sample preparation method, and annealing time had significant effect on hybridization aggregate morphology. By increasing P1 content in the copolymer blends, fraction of looped and stretched cylinders increased, while fraction of bilayers decreased. Nearly no bilayer was observed when P1 content was above 85 wt%. On the other hand, fraction of cylinders decreased while fraction of bilayers increased with the increase of P2 content in copolymer blends. Lamellar structures were obtained, when P2 content was 60 wt% in the copolymer blends, whereas cylinders were seldom found when P2 content was above 80 wt%. These results indicate that P1 and P2 copolymer molecules cooperatively participate in the formation of cylinders and vesicles. Some exotic structures, such as lamellae with protruding cylinders (LPC), incomplete vesicles with protruding cylinders (VPC), and cylindrical bilayers, have been kinetically trapped. These structures may result from intramicellar fusion processes in cylindrical micelles. The striking structures represent a compromise between bilayer and cylindrical geometries.     

Synthesis and crystallization behaviors of poly(styrene-b-isoprene-b-ε-caprolactone) triblock copolymers

The triblock copolymers, poly(styrene-b-isoprene-b-ε-caprolactone)s (PS-b-PI-b-PCL) have been synthesized successfully by combination of anionic polymerization and ring-opening polymerization. Diblock copolymer capped with hydroxyl group, PS-b-PI-OH was synthesized by sequential anionic polymerization of styrene and isoprene and following end-capping reaction of EO, and then it was used as macro initiator in the ring-opening polymerization of CL. The results of DSC and WAXD show big effect of amorphous PS-b-PI on the thermal behaviors of PCL block in the triblock copolymers and the lower degree of crystalline in the triblock copolymer with higher molecular weight of PS-b-PI was observed. The real-time observation on the polarized optical microscopy shows the spherulite growth rates of PCL₂₇, PCL₃₂₈ and PS-b-PI-b-PCL₃₄₄ are 0.71, 0.46 and 0.07 μm s⁻¹, respectively. The atomic force microscopy (AFM) images of the PS₉₀-b-PI₆₆-b-PCL₂₈ show the columns morphology formed by it’s self-assembling.     

Synthesis and micelle formation of triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) in aqueous solution

Amphiphilic triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) (PMMA-b-PEO-b-PMMA) with well-defined structure were synthesized via atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) initiated by the PEO macroinitiator. The macroinitiator and triblock copolymer with different PMMA and/or PEO block lengths were characterized with ¹H and ¹³C NMR and gel permeation chromatography (GPC). The micelle formed by these triblock copolymers in aqueous solutions was detected by fluorescence excitation and emission spectra of pyrene probe. The critical micelle concentration (CMC) ranged from 0.0019 to 0.016 mg/mL and increased with increasing PMMA block length, while the PEO block length had less effect on the CMC. The partition constant K_v for pyrene in the micelle and in aqueous solution was about 10⁵. The triblock copolymer appeared to form the micelles with hydrophobic PMMA core and hydrophilic PEO loop chain corona. The hydrodynamic radius R_h,app of the micelle measured with dynamic light scattering (DLS) ranged from 17.3 to 24.0 nm and increased with increasing PEO block length to form thicker corona. The spherical shape of the micelle of the triblock copolymers was observed with an atomic force microscope (AFM). Increasing hydrophobic PMMA block length effectively promoted the micelle formation in aqueous solutions, but the micelles were stable even only with short PMMA blocks.     

Synthesis and characterization of (AB)n-type poly(l-lactide)-poly(dimethyl siloxane) multiblock copolymer and the effect of its macrodiol composition on urethane formation

An (AB)_n-type multiblock copolymer containing alternating poly(l-lactide) (PLLA) and poly(dimethyl siloxane) (PDMS) segments was synthesized by chain extension of hydroxyltelechelic PLLA-PDMS-PLLA triblock copolymers, which were prepared by the ring-opening polymerization of l-lactide initiated by α,ω-functionalized hydroxyl poly(dimethyl siloxane), using 1,6-hexamethylene diisocyanate as a chain extender. The triblock and the multiblock copolymers were characterized by FT-IR, ¹H NMR and GPC. From the results of thermal analysis, two glass transition temperatures which were measured by DSC showed the occurrence of phase separation phenomena in the triblock and multiblock copolymers because of the difference of solubility parameters between PLLA and PDMS segments. The effect of the chemical composition of the triblock copolymers, including the Mw and the constitutive segment chain length of the macrodiol, on the development of the Mw of the multiblock was discussed based on diffusion effect. Furthermore, the consumption of the isocyanate groups was determined by FT-IR to investigate the dependence of the reaction kinetics of the urethane formation on the chemical composition of the triblock copolymer. The results reveal that the order of the chain extension reaction depended on the Mw of the triblock copolymer: a second order reaction was transformed into a third reaction as the Mw of the triblock copolymer increased from 7000 to 25,000 (g/mol) perhaps because of the inhibition of the formation of an active complex involved in the catalyzed-urethane reaction by the polymer chain aggregation. Finally, the mechanical properties of the multiblock copolymers demonstrated that the introduction of the extremely flexible PDMS segment substantially improved the elongation at breakage, and the tensile strength and the tensile modulus declined due to the intrinsic elasticity of such segments.     

Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers prepared by novel rare earth complex: Synthesis and crystallization properties

Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers have been successfully prepared by the ring-opening polymerization of ε-caprolactone (CL) employing yttrium tris(2,6-di-tert-butyl-4-methylphenolate) [Y(DBMP)₃] as catalyst and double-hydroxyl capped PEGs (DHPEG) as macro-initiator. The triblock architecture, molecular weight, thermal and crystallization properties of the copolymers were characterized by NMR spectra, SEC, DSC and WAXD analyses. The isothermal crystallization behavior of the copolymers was investigated by POM analysis in detail, which is greatly influenced by the length of PCL and PEG blocks. On the POM micrograph of PEG_10,000-(PCL₈₆₀₀)₂, a unique morphology of concentric spherulites was observed due to the sequent crystallization of the PCL and PEG blocks.     

Preparation and properties of poly(urethane-imide)s derived from amine-blocked-polyurethane prepolymer and pyromellitic dianhydride

Poly(urethane-imide)s were prepared using amine-blocked-polyurethane (PU) prepolymer and pyromellitic dianhydride. The PU prepolymers were prepared by the reaction of different diols (polypropyleneoxy glycol, polytetramethyleneoxy glycol, polycaprolactonediol and hydroxyl terminated polybutadiene) and different diisocyanates (2,4-tolylene diisocyanate, 1,4-phenelene diisocyanate, 1,6-hexamethylene diisocyanate, isophorone diisocyanate and 4,4^′-methylenebis(cyclohexyl)isocyanate) and end capped with N-methylaniline. The polymerization was faster with aromatic isocyanates than with aliphatic isocyanates. The effect of imide content on the thermal and mechanical properties was studied. The poly(urethane-imide)s were characterized by FTIR, GPC, TGA and for dynamic and static mechanical properties. Weight average molecular weight (M_w) of the polymers did not vary significantly with change in -NCO/-OH ratio where as number average molecular weight (M_n) increased with increasing -NCO/-OH ratio, correspondingly, the dispersity (PD) decreased. Polymers with higher hard segment content exhibited higher glass transition temperature. The thermal stability of the PU was found to increase significantly by the introduction of imide component.     

Hierarchically organized micellization of thermoresponsive rod‐coil copolymers based on poly[oligo(ethylene glycol) methacrylate] and poly(ε‐caprolactone)

A series of amphiphilic triblock copolymers, poly[oligo(ethylene glycol) methacrylate]_x‐block‐poly(ε‐caprolactone)‐block‐poly[oligo(ethylene glycol) methacrylate]_x, POEGMA_Co(x), were synthesized. Formation of hydrophobic domains as cores of the micelles was studied by fluorescence spectroscopy. The critical micelle concentrations in aqueous solution were found to be in the range of circa 10^?6 M. A novel methodology by modulated temperature differential scanning calorimetry was developed to determine critical micelle temperature. A significant concentration dependence of cmt was found. Dynamic light scattering measurements showed a bidispersed size distribution. The micelles showed reversible dispersion/aggregation in response to temperature cycles with lower critical solution temperature between 75 and 85 °C. The interplay of the two hydrophobic and one thermoresponsive macromolecular chains offers the chance to more complex morphologies. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of poly[(4-vinylphenyl)dimethyl- silane]-b-polybutadiene-b-poly[(4-vinylphenyl)dimethylsilane] (PVPDMS-b-PBd-b-PVPDMS)

The novel functionalized triblock copolymers,poly[(4-vinylphenyl)dimethylsilane]-b-polybutadiene-b-poly[(4-vinylphenyl)-dimethylsilane] (PVPDMS-b-PBd-b-PVPDMS),were synthesized by anionic polymerization method using high vacuum technique. The hydrocarbon-soluble dilithium initiator synthesized from l,3-di[l-(methylphenyl)ethenyl]benzene(MPEB) was used to synthesize polybutadiene(PBd) precursors and the triblock copolymers in the presence of sec-BuOLi.The precursors and copolymers were characterized by size exclusion chromatography(SEC),~1HNMR and DSC techniques.     

Structure and properties of new polyester elastomers composed of poly(trimethylene terephthalate) and poly(ethylene oxide)

Series of PTT-b-PEO copolymers with different composition of rigid PTT and PEO flexible segments were synthesized from dimethyl terephthalate (DMT), 1,3-propanediol (PDO), poly(ethylene glycol) (PEG, M_n = 1000 g/mol) in a two stage process involving transesterification and polycondensation in the melt. The weight fraction of flexible segments was varied between 20 and 70 wt%. The molecular structure of synthesized copolymers was confirmed by ¹H NMR and ¹³C NMR spectroscopy. The superstructure of these polymers was characterized by DSC, DMTA, WAXS and SAXS measurements. It was observed that domains of three types can exist in PTT-b-PEOT copolymers: semi-crystalline PTT, amorphous PEO rich phase (amorphous PEO/PTT blended phase) and semi-crystalline PEO phase. Semi-crystalline PEO phase was observed only at temperature below 0 °C for sample containing the highest concentration of PEO segment. The phase structure, thermal and mechanical properties are effected by copolymer composition. The copolymers containing 30÷70 wt% of PEO segment posses good thermoplastic elastomers properties with high thermal stability. Hardness and tensile strength rise with increase of PTT content in copolymers.     

Fluorine-containing poly(carbonate-block-siloxane) copolymers

On the basis of carbofunctional oligo(??,??-bisphenoxy-trifluoropropyl(methyl)siloxanes, bisphenols, and bisphenol A bis(chloroformate), novel fluorine-containing poly(carbonate-block-siloxanes) are synthesized and characterized. The presence of trifluoropropyl groups in siloxane blocks of the copolymers decreases the sorption of hydrocarbons by 4 to 6 wt % instead of the 60 wt % for usual poly(carbonate-block-dimethylsiloxanes). Films based on fluorine-containing poly(carbonate-block-siloxanes) retain their high strength characteristics in the swollen state (??_b = 20 MPa).     

Synthesis and properties of comb-shaped segmented poly(urethanes) based on 1,2-propanediol derivatives

Comb-shaped segmented poly(urethanes) have been synthesized from ethers via the one-step procedure with the use of glycerol monostearate, D,L-3-octadecyloxy-1,2-propanediol, 3-tert-butoxy-1,2-propanediol, 3-benzyloxy-1,2-propanediol, and 1,2-propanediol as chain extenders. The soft segment of poly(urethanes) was derived from macrodiol (poly(tetramethylene glycol) with M _n = 1000), and 1,6-hexamethylene diisocyanate and 4,4′-cyclohexylmethane diisocyanate were used as diisocyanates. The effect of the structure of side chains located at the hard segments on the formation of hydrogen bonds in comb-shaped poly(urethanes) has been studied by IR spectroscopy. On the basis of DSC measurements, the glass transition temperatures of the soft and hard segments and the temperature and enthalpy of melting of the crystalline phase have been estimated and the microphase separation of segments has been assessed. The mechanical characteristics of the polymers under study have been examined.     

Poly(methylmethacrylate-dimethylsiloxane) triblock copolymers synthesized by transition metal mediated living radical polymerization: bulk and surface characterization

Well-defined poly(MMA-b-DMS-b-MMA) triblock copolymers were prepared by copper(I) mediated living radical polymerization. This was achieved by polymerization of methylmethacrylate (MMA) with different concentrations of 2-bromoisobutyrate terminated polydimethylsiloxane (PDMS). The polymerization occurred in controlled manner with the molecular weight found by ¹H NMR close to that predicted and a narrow molecular weight distribution (M_w/M_n∼1.2). Copolymers were obtained with M_n=2100, 4900, 10 100 and 29 500 g mol⁻¹ respectively with poly(MMA) (PMMA) terminal blocks and a central PDMS block of 5500 g mol⁻¹ in each case.DSC analysis showed most of the poly(MMA-b-DMS-b-MMA) triblock copolymers exhibits two T_g’s, one at low temperature corresponding to the T_g of PDMS microphase and a second at high temperature corresponding to the T_g of the PMMA microphase. TEM images show microphase segregation morphology in bulk for the triblock copolymers, with a higher degree of segregation for copolymers containing higher PDMS content. XPS measurements were performed to determine the chemical composition at the surface. For all the copolymers PDMS enrichment is observed at the surface. Copolymers containing higher percentage of PDMS exhibit higher phase separation and better enrichment of PDMS at the surface. The surface tension determined by contact angle measurements of the copolymer film containing 59 mol% of PDMS was 19.15 mN m⁻¹.     

Synthesis of well‐defined amphiphilic polymethylene‐b‐poly(ε‐caprolactone)‐b‐poly(acrylic acid) triblock copolymer via a combination of polyhomologation,ring‐opening polymerization,and atom transfer radical polymerization

Well‐defined amphiphilic polymethylene‐b‐poly(ε‐caprolactone)‐b‐poly(acrylic acid) (PM‐b‐PCL‐b‐PAA) triblock copolymers were synthesized via a combination of polyhomologation, ring‐opening polymerization (ROP), and atom transfer radical polymerization (ATRP). First, hydroxyl‐terminated polymethylenes (PM‐OH; M_n = 1100 g mol^?1; M_w/M_n = 1.09) were produced by polyhomologation followed by oxidation. Then, the PM‐b‐PCL (M_n = 10,000 g mol^?1; M_w/M_n = 1.27) diblock copolymers were synthesized via ROP of ε‐caprolactone using PM‐OH as macroinitiator and stannous octanoate (Sn(Oct)₂) as a catalyst. Subsequently, the macroinitiator transformed from PM‐b‐PCL in high conversion initiated ATRPs of tert‐butyl acrylate (^tBA) to construct PM‐b‐PCL‐b‐P^tBA triblock copolymers (M_n = 11,000–14,000 g mol^?1; M_w/M_n = 1.24–1.26). Finally, the PM‐b‐PCL‐b‐PAA triblock copolymers were obtained via the hydrolysis of the P^tBA segment in PM‐b‐PCL‐b‐P^tBA triblock copolymers. The chain structures of all the polymers were characterized by gel permeation chromatography, proton nuclear magnetic resonance, and Fourier transform infrared spectroscopy. Porous films of such triblock copolymers were fabricated by static breath‐figure method and observed by scanning electron microscope. The aggregates of PM‐b‐PCL‐b‐PAA triblock copolymer were studied by transmission electron microscope. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Influence of block composition on crack toughness behaviour of styrene-b-(styrene-random-butadiene)-b-styrene triblock copolymers

The deformation and fracture behaviour of symmetric and asymmetric styrene-b-(styrene-random-butadiene)-b-styrene (S-SB-S) triblock copolymers with variations in their molecular architectures in terms of their outer PS block and the random SB middle block composition ratios have been investigated using essential work of fracture approach based on post yield fracture mechanics concept. The present investigations on crack resistance behaviour of these S-(S/B)-S triblock copolymers where effective interaction parameter (χ_eff) is systematically varied through the variation of block compositions and architecture is in continuation to our earlier communicated short article highlighting the phase behaviour-morphology and mechanical property interrelation. The crack initiation and propagation behaviours are correlated to morphology and dynamic mechanical properties as obtained from TEM, SAXS and DMA measurements. The influence of interaction parameter (χ-parameter) space which has been manipulated through the variation of block compositions has clearly manifested in their morphologies and in their mechanical properties. Further the kinetic aspects of fracture mechanical response have also been investigated where all the materials have clearly revealed block composition dependence. SEM analysis was carried out to understand the fracture modes prior to failure.     

The behavior of poly(amino acids) containing l‐cysteine and their block copolymers with poly(ethylene glycol) on gold surfaces

Poly(ethylene glycol) (PEG) is often used to biocompatibilize surfaces of implantable biomedical devices. Here, block copolymers consisting of PEG and l ‐cysteine‐containing poly(amino acid)s (PAA's) were synthesized as polymeric multianchor systems for the covalent attachment to gold surfaces or surfaces decorated with gold nanoparticles. Amino‐terminated PEG was used as macroinitiator in the ring‐opening polymerization, (ROP), of respective amino acid N‐carboxyanhydrides (NCA's) of l ‐cysteine (l ‐Cys), l ‐glutamate (l ‐Glu), and l ‐lysine (l ‐Lys). The resulting block copolymers formed either diblock copolymers, PEG‐b‐p(l ‐Glu_x‐co‐l ‐Cys_y) or triblock copolymers, PEG‐b‐p(l ‐Glu)_x‐b‐p(l ‐Cys)_y. The monomer feed ratio matches the actual copolymer composition, which, together with high yields and a low polydispersity, indicates that the NCA ROP follows a living mechanism. The l ‐Cys repeat units act as anchors to the gold surface or the gold nanoparticles and the l ‐Glu repeat units act as spacers for the reactive l ‐Cys units. Surface analysis by atomic force microscopy revealed that all block copolymers formed homogenous and pin‐hole free surface coatings and the phase separation of mutually immiscible PEG and PAA blocks was observed. A different concept for the biocompatibilization of surfaces was followed when thiol‐terminated p(l ‐Lys) homopolymer was first grafted to the surface and then covalently decorated with HOOC‐CH₂‐PEG‐b‐p(Bz‐l ‐Glu) polymeric micelles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 248–257     

Single-site binding of pyrene to poly(ester-imide)s incorporating long spacer-units: prediction of NMR resonance-patterns from a fractal model

Co-polycondensation of the diimide-based diols N,N′-bis(2-hydroxyethyl)hexafluoroisopropylidene-diphthalimide, (HFDI), and N,N′-bis(2-hydroxy-ethyl)naphthalene-1,4,5,8-tetracarboxylic-diimide, (NDI), with aliphatic diacyl chlorides ClOC(CH₂)_xCOCl (x = 5 to 8) affords linear copoly(ester-imide)s. Such copolymers interact with pyrene via supramolecular binding of the polycyclic aromatic at NDI residues. This interaction results in upfield complexation shifts and sequence-related splittings of the NDI ¹H NMR resonances, but gives a very different final resonance-pattern from the copolymer where x = 2. Computational modelling of the polymer with x = 5 suggests that each pyrene molecule binds to just a single NDI residue rather than by intercalation between a pair of NDI''s at a tight chain-fold, as was found for x = 2. The new single-site binding model enables the pattern of ¹H NMR resonances for copolymers with longer spacers (x = 5 to 8) to be reproduced and assigned by simulation from sequence-specific shielding factors based on a type of fractal known as the last-fraction Cantor set. As this type of fractal also enables an understanding of pairwise binding systems, it evidently provides a general numerical framework for supramolecular sequence-analysis in binary copolymers.

Nine ¹H NMR resonances assignable to specific copoly(ester-imide) sequences identified from a fractal model result from 1 : 1 supramolecular binding of pyrene to NDI residues.     

Novel synthesis of biodegradable amphiphilic linear and star block copolymers based on poly(ε‐caprolactone) and poly(ethylene glycol)

Biodegradable, amphiphilic, diblock poly(ε‐caprolactone)‐block‐poly(ethylene glycol) (PCL‐b‐PEG), triblock poly(ε‐caprolactone)‐block‐poly(ethylene glycol)‐block‐poly(ε‐caprolactone) (PCL‐b‐PEG‐b‐PCL), and star shaped copolymers were synthesized by ring opening polymerization of ε‐caprolactone in the presence of poly(ethylene glycol) methyl ether or poly(ethylene glycol) or star poly(ethylene glycol) and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature to yield monomodal polymers of controlled molecular weight. The chemical structure of the copolymers was investigated by ¹H and ¹³C NMR. The formation of block copolymers was confirmed by ¹³C NMR and DSC investigations. The effects of copolymer composition and molecular structure on the physical properties were investigated by GPC and DSC. For the same PCL chain length, the materials obtained in the case of linear copolymers are viscous whereas in the case of star copolymer solid materials are obtained with low T_g and T_m temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3975–3985, 2007     

Synthesis of poly(N,N‐dimethylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N,N‐dimethylacrylamide) and its application for separation of proteins by capillary zone electrophoresis

A series of well‐defined triblock copolymers, poly(N, N‐dimethylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N, N‐dimethylacrylamide) (PDMA‐b‐PEO‐b‐PDMA) synthesized by atom transfer radical polymerization, were used as physical coatings for protein separation. A comparative study of EOF showed that the triblock copolymer presented good capillary coating ability and EOF efficient suppression. The effects of the M_r of PDMA block in PDMA‐b‐PEO‐b‐PDMA triblock copolymer and buffer pH on the separation of basic protein for CE were investigated. Moreover, the influence of the copolymer structure on separation of basic protein was studied by comparing the performance of PDMA‐b‐PEO‐b‐PDMA triblock copolymer with PEO‐b‐PDMA diblock copolymer. Furthermore, the triblock copolymer coating showed higher separation efficiency and better migration time repeatability than fused‐silica capillary when used in protein mixture separation and milk powder samples separation, respectively. The results demonstrated that the triblock copolymer coatings would have a wide application in the field of protein separation.     

Synthesis and dielectric properties of novel liquid crystalline triblock copolymers with cyanobiphenyl moieties and poly(n‐butyl acrylate) segments

In this work, self‐assembly method was used to improve the dielectric constant of triblock copolymers. A series of ABA triblock copolymers with a defined length of poly(n‐butyl acrylate) (PBA, B block) segment and different lengths of liquid crystalline (LC) poly[11‐(4‐cyano‐4′‐biphenoxy)undecyl methacrylate] (P11CBMA, A block) segments were synthesized by using the atom transfer radical polymerization method. The well‐defined triblock copolymers P11CBMA_m‐b‐PBA_n‐b‐P11CBMA_m possess three different B/A ratios (n = 50, m = 17, 43, 53). Due to the supramolecular cooperative motion effect, the copolymers can form worm‐like microstructure (W_LC = 52.8%), cylinder‐like nanostructure with P11CBMA phase embedded in PBA matrix (W_LC = 73.9%), and wide stripe structure with LC domains distributed unevenly in a continuous PBA matrix (W_LC = 77.7%) after annealed at 160°C (above T_i) under N₂ for 24 h, respectively. In order to study the influence of microphase separated morphology of triblock copolymer on the dielectric properties, solvent annealing was also used to develop various nanostructures. After thermal or solvent annealing, the dielectric constants of block copolymers increased dramatically while their loss factors remained the same. For different block copolymers, the dielectric constants increased with the increase of the LC block length. For diverse treatments, dielectric permittivities of samples varied widely with different nanostructures. The results show that the dielectric constants of block copolymers could be tuned by the block ratios and the self‐assembled microstructures. These findings will inspire researchers using self‐assembly method to design and develop novel flexible materials with high dielectric permittivity. Copyright © 2014 John Wiley & Sons, Ltd.