Iron‐catalyzed radical polymerization of acrylamides in the presence of Lewis acid for simultaneous control of molecular weight and tacticity

This work is directed to the stereospecific living radical polymerization of acrylamides such as N,N‐dimethylacrylamide and N‐isopropylacrylamide with an iron complex and a Lewis acid. DMAM was polymerized with [FeCp(CO)₂]₂ in conjunction with an alkyl iodide [(CH₃)₂C(CO₂Et)I] as an initiator in the presence of Y(OTf)₃ in toluene/methanol (1/1) at 60 °C to be converted almost quantitatively to the polymers with controlled molecular weights and high isotacticity (m > 80%), wherein the Fe‐complex generates radical species from a covalent C? I bond of the dormant species and the Lewis acid controls the stereochemistry of the polymerization via coordination with the amide groups of the polymer terminal and the monomer. A series of Lewis acids were also used for the iron(I)‐catalyzed DMAM polymerization, and Yb(OTf)₃ and Yb(NTf₂)₃ proved effective in giving isotactic polymers without deteriorating the molecular weight control similar to Y(OTf)₃. Furthermore, a slight enhancement of isospecificity was observed for the iron‐catalyzed system in comparison with the α,α‐Azobisisobutyronitrile‐initiated, when coupled with Y(OTf)₃. Stereoblock polymerization of DMAM via a one‐pot reaction was also achieved by just adding the Y(OTf)₃ methanol solution in the course of the polymerization to give atactic‐b‐isotactic poly(DMAM). A similar but slightly lower control in the molecular weight and tacticity was achieved in the polymerization of NIPAM with [FeCp(CO)₂]₂/Y(OTf)₃. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2086–2098, 2006     

Stereoregulation of thermoresponsive polymer brushes by surface-initiated living radical polymerization and the effect of tacticity on surface wettability

In this study, stereocontrolled poly(N-isopropylacrylamide) (PIPAAm) brushes were grafted from surfaces by atom transfer radical polymerization (ATRP) in the presence of a Lewis acid, and the effect of PIPAAm brush tacticity on the thermoresponsive wettabiliy was investigated. PIPAAm grafted by ATRP in the presence of Y(OTf)(3) showed high isotacticity, while the control brush polymerized in the absence of Y(OTf)(3) was clearly atactic. The isotacticity and molecular weight of PIPAAm brushes were controlled by polymerization conditions. The wettability of isotactic PIPAAm-grafted surfaces decreased slightly below 10 °C, although the phase transition temperature of atactic surface was 30 °C, and the bulk isotactic polymer was water-insoluble between 5 and 45 °C.     

Stereocontrol Study in Radical Polymerization of 2-Acrylamido-2-methylpropane Sulfonic Acid in the Presence of Lewis Acids

Tacticity of poly-2-acrylamido-2-methylpropane sulfonic acid samples that were prepared via free radical polymerization in four different solvents, ethanol, dimethyl sulphoxide (DMSO), N, N-dimethylformamide (DMF) and water, were studied by ¹³C nuclear magnetic resonance (¹³C-NMR) techniques. In order to change isotacticity, two rare metal triflates, yttrium trifluoromethane sulfonate (Y(OTf)₃) and ytterbium trifluoromethane sulfonate (Yb(OTf)₃), were used. The stereoregularity of the obtained polymers in DMSO, water and DMF in the presence of the mentioned triflates did not show a noticeable alteration. But isotacticity of the samples prepared in ethanol was increased by about 17% in the presence 75 wt% Y(OTf)₃. In the absence of metal triflates, solvents did not have any significant effect on stereocontrol. In addition, the influence of temperature on isotacticity of the prepared samples was studied. By decreasing the reaction temperature, the isotacticity increased slightly.     

Synthesis, structure and butadiene polymerization behavior of CoCl2(PRxPh3 − x)2 (R = methyl, ethyl, propyl, allyl, isopropyl, cyclohexyl; x = 1, 2). Influence of the phosphorous ligand on polymerization stereoselectivity

Several cobalt(II) phosphine complexes have been synthesized by reacting cobalt(II) chloride with various mono- and diphenylalkylphosphines (PR_xPh_3 − x; R = methyl, ethyl, allyl, propyl, isopropyl, cyclohexyl; x = 1, 2). For some of these complexes single crystals were obtained and their molecular structure, were determined by X-ray diffraction method. All the complexes were then used in association with MAO for the polymerization of 1,3-butadiene and they were found to be extremely active. Predominantly 1,2 polymers having different tacticity (predominantly iso- or syndiotactic), depending on the type of phosphine ligand bonded to the cobalt atoms were obtained. An interpretation of this particular behavior, based on the diene polymerization mechanism previously proposed, is reported.     

Protein–polymer hybrids: Conducting ARGET ATRP from a genetically encoded cleavable ATRP initiator

Protein–polymer hybrids are an important class of biomaterials. Described is the preparation of a genetically incorporated a non-canonical amino acid (nCAA) containing an ester linked atom transfer radical polymerization (ATRP) initiator, followed by a controlled “grafting from” polymerization. A Methanococcus jannaschii tyrosyl-tRNA synthetase/tRNA_CUA pair was selected to genetically encode p-bromoisobutyryloxymethyl-l-phenylalanine (biF) in response to an amber codon. This biF was directly incorporated into green fluorescent protein (GFP) at residue 134 generating biF-GFP. Activators regenerated by electron transfer (ARGET) ATRP was conducted under biologically relevant conditions to graft well-defined poly(oligo ethylene oxide methacrylate) from the biF-GFP. The biF-GFP retained its biofluorescence properties throughout the polymerization indicating the utility of ARGET ATRP for preparing protein–polymer hybrids. The presence of a base-labile ester bond in the initiator, allowed cleavage of the grafted polymer from the protein and directly analyze their molecular weight and molecular weight distribution using gel permeation chromatography (GPC). The cleaved final polymer had a M_n = 27,000 and a molecular weight distribution of M_w/M_n = 1.27.     

Water-tolerant catalyst systems for the bulk cationic polymerization of para-methylstyrene and indene

Water-tolerant catalyst systems have been investigated for the cationic oligomerization of technical-grade p-methylstyrene and indene, for the production of industrially relevant aromatic resins. Systems based on 1-p-tolylethanol and 1-indanol (ROH) as initiators, in association with Cu(OTf)₂, Bi(OTf)₃ (OTf = triflate) and B(C₆F₅)₃ as co-initiators/catalysts, show interesting productivities at 60 °C under air, with as low as 0.2-1.0 mol% catalyst loading. Most of the reactions are not controlled in terms of molecular weights of the products, except for indene oligomerization by the borane catalyst where experimental M_n values match well the theoretical values, as determined by the amount of added initiator over a 5-fold range (with 2-10 mol% vs. monomer). The ROH/tris(pentafluorophenyl)borane system offers the best compromise in terms of productivity and control over the molecular weights of the oligomers, which can be manipulated by the amount of initiator and reaction temperature.     

Vinyl polymerization of norbornene catalyzed by a series of bis(β-ketoiminato)nickel (II) complexes in the presence of methylaluminoxane

A series of nickel complexes with β-ketoiminato ligands based on pyrazolone derivative were synthesized and characterized, which are highly active catalyst precursors for norbornene polymerization under mild reaction conditions through a vinyl-type polymerization mechanism. The catalytic activity could be up to 3.38 × 10⁷ g polymer/mol Ni h. The molecular weight distributions of the polynorbornenes (M_w/M_n = 2.05-2.56) indicate the presence of a single active species in the polymerization process.     

Synthesis of thermally responsive cylindrical molecular brushes via a combination of nitroxide-mediated radical polymerization and “grafting onto” strategy

Loosely grafted amphiphilic molecular brushes consisting of a hydrophobic polystyrene backbone and hydrophilic poly(ethylene glycol) monomethyl ether (MPEG) side chains, PS-MPEG, were synthesized by a novel two step method. In the first step, well-defined linear poly(p-chloromethylstyrene) PCMS with the degree of polymerization DP ≈ 200 and polydispersity index, M_w/M_n = 1.4 was prepared by bulk nitroxide (TEMPO)-mediated radical polymerization (NMP). In the second step, pendant p-chloromethyl units were coupled with activated chains of poly(ethylene glycol) monomethyl ether (MPEG) during the course of the Williamson etherification reaction. Using MPEG with M_n = 1100 g/mol over 50% repeating units on PCMS underwent nucleophilic substitution yielding a densely grafted brush with theoretical molecular weight M_n,th ≈ 123,000 g/mol. The molecular brush PS-MPEG assumed conformation of a stiff cylinder in both dilute toluene (non-selective good solvent for PS backbone and MPEG grafts) and water (selective for MPEG grafts) solutions as determined by small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS). The contour length L = 570 Å and L = 694 Å obtained by fitting the scattering data using model of Sharp-Bloomfield, Pedersen-Schurtenberger and Kholodenko worm revealed dimensions corresponding to theoretically estimated size of a single molecular brush. It was found that PS-MPEG molecular brush in dilute aqueous solutions exhibited lower critical solution temperature (LCST) in the physiological range.     

Surface structure of thin asymmetric PS-b-PMMA diblock copolymers investigated by atomic force microscopy

Asymmetric poly(styrene-b-methyl methacrylate) (PS-b-PMMA) diblock copolymers of molecular weight M_n = 29,700 g mol⁻¹ (M_PS = 9300 g mol⁻¹M_PMMA = 20,100 g mol⁻¹, PD = 1.15, χ_PS = 0.323, χ_PMMA = 0.677) and M_n = 63,900 g mol⁻¹ (M_PS = 50,500 g mol⁻¹, M_PMMA = 13,400 g mol⁻¹, PD = 1.18, χ_PS = 0.790, χ_PMMA = 0.210) were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. Atomic force microscopy (AFM) was used to investigate the surface structure of thin films, prepared by spin-coating the diblock copolymers on a silicon substrate. We show that the nanostructure of the diblock copolymer depends on the molecular weight and volume fraction of the diblock copolymers. We observed a perpendicular lamellar structure for the high molar mass sample and a hexagonal-packed cylindrical patterning for the lower molar mass one. Small-angle X-ray scattering investigation of these samples without annealing did not reveal any ordered structure. Annealing of PS-b-PMMA samples at 160 °C for 24 h led to a change in surface structure.     

Direct construction of silicon-silicon bond by using the low-valent titanium reagent

The reductive dimerization or polymerization of organochlorosilanes has been achieved by using the low-valent titanium reducing agent other than the alkali metals that are invariable used in the Wurtz-type coupling reaction. Applying this method, the corresponding disilanes or poly(methylvinylsilane) was obtained in good yields. The poly(methylvinylsilane) synthesized by this method is highly pure with a high molecular weight and a narrow molecular weight distribution (M_w/M_n = 1.6, M_n = 16,860).     

Stereocontrol in radical polymerization of acrylic monomers

A clear effect of Lewis acids, such. as scandium trifluoromethanesulfonate [Sc(OTf)₃], on stereocontrol during the radical polymerization of a designed monomer, benzyl α-(methoxymethyl)acrylate was found. This Lewis acid also influenced the stereochemistry in the radical polymerization of methyl methacrylate giving a less syndiotactic and more isotactic polymer, although many Lewis acids were not effective. A catalytic amount of Lewis acids, such as Y(OTf)₃ and Yb(OTf)₃, also significantly enhanced isotactic-specificity during the radical polymerization of acrylamide and its derivatives, N-isopropylacrylamide (NIPAM) and N,N-dimethylacrylamide. Obvious solvent and temperature effects on tacticity were observed in these polymerizations, and poly(NIPAM) with >80% triad isotactic content has been obtained in the presence of Lewis acids.     

Synthesis of hyperbranched-linear star block copolymers by atom transfer radical polymerization of styrene using hyperbranched poly(siloxysilane) (HBPS) macroinitiator

Hyperbranched-linear star block copolymers, hyperbranched poly(siloxysilane)-block-polystyrene (HBPS-b-PSt), were prepared by atom transfer radical polymerization (ATRP) of styrene in xylene, using bromoester-terminated HBPS (HBPS-Br (P3), M_n = 7500, M_w/M_n = 1.76) as a macroinitiator. The number-average molecular weights of the obtained polymers (M_n) were in the range of 21,800-60,000 and molecular weight distributions were unimodal throughout the reaction (M_w/M_n = 1.28-1.40). These polymers showed 5 wt.% decomposition temperature (T_d5) over 300 °C. The DSC thermograms of the resulting polymers indicated two glass transition temperatures (T_g). The T_g of HBPS segment shifted to higher value while the T_g of PSt segment shifted to lower value compared with those of the homopolymers. Preliminary physical characterization related to the solution viscosity of the resulting block copolymers is also reported.     

Stereocontrol using Lewis acids in radical polymerization

The radical polymerization of various (meth)acrylamides in the presence of Lewis acids such as Yb(OTf)₃ and Y(OTf)₃ was carried out. The polymerization with Lewis acids led to highly isotactic polymers, while the polymers synthesized without Lewis acids were atactic or syndiotactic. The dependence of the polymer properties on the tacticity was also demonstrated.     

Effect of hydrophilic macro-RAFT agent in surfactant-free emulsion polymerization

Here we report, synthesis of different molecular weight poly (styrene sulfonate) based macro-RAFT agents and their use as shell material in surfactant-free emulsion polymerization of styrene. Concentration and molecular weight of hydrophilic macro-RAFT agent has an influence on colloidal stability, particle size distribution and self-assembly. Microscopic and zeta-potential studies of colloids reveal that, the macro-RAFT agents used with low molecular weight (M_n = 1200) are comparable more efficient than high molecular weight (M_n = 46,800 and 116,000) for imparting narrow particle size distribution with good colloidal stability.     

Synthesis of new polyazines by 1,4 photochemical or anionic polymerization of 1,2-diaza-1,3-butadienes

Photochemical and anionic polymerizations of 1,2-diaza-1,3-butadienes are described. Photochemical polymerization was smoothly performed by irradiation of some 1-aminocarbonyl-1,2-diaza-1,3-butadienes with high pressure mercury arc (λ = 300 nm) in the presence of allyltributylstannane. Molecular weights (M_w) in the range 14.6-559 × 10² g/mol were obtained. The TGA curve revealed a first weight loss starting at about 200 °C of some 85%, and a second starting at about 300 °C. The DSC showed the glass transition (T_g) at about −34 °C. Anionic polymerization was performed by treatment of some 1-alkoxycarbonyl-1,2-diaza-1,3-butadienes with n-butyllithium. Molecular weights (M_w) in the range 8.44-242 × 10² g/mol were obtained.     

Near IR luminescent rare earth 3,4,5,6-tetrafluoro-2-nitrophenoxide complexes: Synthesis,X-ray crystallography and spectroscopy

3,4,5,6-Tetrafluoro-2-nitrophenoxide (L⁻) forms complexes with rare earth M³⁺ ions. X-ray crystal structures of substances with the stoichiometry Cs₂ML₅ · mEt₂O (M = Er, m = 0; M = Er, m = 1; M = Y, m = 1.5; M = Yb, m = 1) have been determined. Each M³⁺ ion is coordinated to two bidentate and three monodentate L⁻ ions; Et₂O does not coordinate to M³⁺. The complexes absorb both visible and ultraviolet light. The solid Er³⁺ and Yb³⁺ complexes have unusually long lifetimes (τ = 20.2 μs and 142 μs, respectively) for the decay of their luminescence in the near-infrared region following photoexcitation; this is attributed to the lack of C–H bonds and other high frequency oscillators that could cause vibrational quenching.     

Reverse atom transfer radical polymerisation (RATRP) of methacrylates using copper(I)/pyridinimine catalysts in conjunction with AIBN

N-n-Propyl-2-pyridylmethanimine, 1, N-n-octyl-2-pyridylmethanimine, 2, N-n-lauryl-2-pyridylmethanimine, 3, and N-n-octadecyl-2-pyridylmethanimine, 4 have been used in conjunction with copper(II) bromide and azo initiators for the reverse atom transfer radical polymerisation of a range of methacrylates. AIBN to Cu^IIBr₂ ratios of 0.5:1, 0.75:1 and 1:1 give PMMA with M_n 11 500 g mol⁻¹ (PDi = 1.24) (at 22% conversion), 12 500 g mol⁻¹ (PDi = 1.06) (at 83% conversion) and 10 900 g mol⁻¹ (PDi = 1.11) (at 84% conversion), respectively. A Cu^IIBr₂ complex is demonstrated to be needed at the start of the reaction for good control over molecular weight and polydispersity as reactions using Cu(I)Br as catalyst yielded PMMA of M_n 31 000 g mol⁻¹ (PDi = 2.90), reactions with no copper yield PMMA of M_n 33 000 g mol⁻¹ (PDi = 2.95). The RATRP of styrene was carried out using Cu^IIBr₂ as catalyst. AIBN to Cu^IIBr₂ ratio of 0.5:1, 0.75:1 and 1:1 gave PS with M_n = 12 400 g mol⁻¹ (PDi = 1.27) at low conversion, M_n = 15 500 g mol⁻¹ (PDi = 1.11) and 12 400 g mol⁻¹ (PDi = 1.38), respectively at ∼85% conversion. A series of block copolymers of MMA with BMA, BzMA and DMEAMA (15 600 g mol⁻¹ (PDi = 1.18), 13 300 g mol⁻¹ (PDi = 1.14) 15 300 g mol⁻¹ (PDi) = 1.16), using a PMMA macroinitiator were prepared. Emulsion polymerisation of MMA using [initiator]:[Cu^(II)Br₂] ratio = 0.5:1 with Brij surfactant gave a linear increase of M_n with respect to conversion, final M_n = 112 800 g mol⁻¹ (PDi = 1.42). Further reactions were carried out with [initiator]:[Cu^(II)Br₂] ratio = 0.75:1 and 1:1. Both giving PMMA with M_n ∼ 32 000 g mol⁻¹ (PDi ∼ 2.4). These reactions exhibit no control, this is because the azo initiator is present in excess and all of the monomer is consumed by a free radical polymerisation as opposed to a controlled reaction. Particle size analysis (DLS) showed the particle size between 160 and170 nm in all cases.     

Reactivity ratios in conventional and nickel-mediated radical copolymerization of methyl methacrylate and functionalized methacrylate monomers

Copolymerization of an excess of methyl methacrylate (MMA) relative to 2-hydroxyethyl methacrylate (HEMA) was carried out in toluene at 80 °C according to both conventional and controlled Ni-mediated radical polymerizations. Reactivity ratios were derived from the copolymerization kinetics using the Jaacks method for MMA and integrated conversion equation for HEMA (r_MMA = 0.62 ± 0.04; r_HEMA = 2.03 ± 0.74). Poly(ethylene glycol) α-methyl ether, ω-methacrylate (PEGMA, M_n = 475 g mol⁻¹) was substituted for HEMA in the copolymerization experiments and reactivity ratios were also determined (r_MMA = 0.75 ± 0.07; r_PEGMA ∼ 1.33). Both the functionalized comonomers were consumed more rapidly than MMA indicating the preferred formation of heterogeneous bottle-brush copolymer structures with bristles constituted by the hydrophilic (macro)monomers. Reactivity ratios for nickel-mediated living radical polymerization were comparable with those obtained by conventional free radical copolymerization. Interactions between functional monomers and the catalyst (NiBr₂(PPh₃)₂) were observed by ¹H NMR spectroscopy.     

A versatile synthesis of poly(lauryl acrylate) using N-(n-octyl)-2-pyridylmethanimine in copper mediated living radical polymerization

A facile synthesis of poly(lauryl acrylate) has been achieved by atom transfer radical polymerization using benzyl-2-bromoisobutyrate, copper (I) bromide, and N-(n-octyl)-2-pyridylmethanimine (OPMI). The latter was of great interest as its synthesis was very easy to carry out and as it allowed the reaction mixture to be homogeneous, which was essential for the control of the reaction. The polymerization was controlled under these conditions and was optimized with the addition of copper (II) bromide as deactivator. We proved that the synthesis of poly(lauryl acrylates) with well defined molecular weights and narrow polydispersities was possible using a ligand which does not require difficult synthesis and purification. We also showed the ability of pyridylmethanimine ligands to control ATRP of an acrylate derivative. Best results were obtained at 130 °C in xylene for [Initiator]₀/[Cu(I)Br]₀/[Cu(II)Br₂]₀/[OPMI]/[lauryl acrylate] equal to 1/1/0.05/2.2/181, respectively (M_n = 19,942, DPI = 1.28).     

New group 4 half sandwich complexes containing triethanolamine ligand for polyethylene

(η⁵-C₅Me₅)M(TEA) (M = Ti, 1; Zr, 2; Hf, 3; TEA = triethanolateamine) was prepared by the reaction of (η⁵-C₅Me₅)MCl₃ with triethanolamine in the presence of NEt₃. The polyethylene catalytic efficiency in terms of activity decreases in the order 1/MAO > 2/MAO ? 3/MAO. In addition, the molecular weight (M_v) and melting temperature (T_m) of all the resulting polyethylene obtained by 2/MAO show the range of M_v = 91,200-356,200 and T_m = 137.0-141.9 °C, respectively; however, 1/MAO and 3/MAO gave polyethylenes with lower molecular weight (M_v = 6800-78,700) and lower melting temperature (T_m = 125.9-136.7 °C). Furthermore, 1/MAO showed significant decrease in the catalytic activity with increasing polymerization temperature though 2/MAO and 3/MAO have no dependence on the polymerization temperature.