Antistatic ability of 1-n-tetradecyl-3-methylimidazolium bromide and its effects on the structure and properties of polypropylene

In this study, 1-n-tetradecyl-3-methylimidazolium bromide ([C₁₄mim]Br), one kind of imidazolium ionic liquid (imi-IL), was incorporated into polypropylene (PP) via melt blending. The measurement of surface resistance (R_s) and volume resistance (R_v) of neat PP and PP/[C₁₄mim]Br blends indicated that [C₁₄mim]Br had excellent antistatic properties. The PP/[C₁₄mim]Br blend had the best antistatic ability, when the weight ratio of [C₁₄mim]Br to PP reached 3/100. The surface resistance of PP/[C₁₄mim]Br decreased from the 7.67 × 10¹³ to 1.40 × 10⁷ Ω whereas the volume resistance of PP decreased from 2.67 × 10¹⁴ to 2.60 × 10⁷ Ω. Semicrystalline morphology and crystal structure were investigated by polarized optical microscopy (POM) and X-ray diffraction (XRD). The spherulites of PP became smaller with the addition of [C₁₄mim]Br, implying that [C₁₄mim]Br had a nucleating effect in the PP matrix. The XRD study indicates the crystallization process of PP was affected by [C₁₄mim]Br, and the crystallinity of PP was thus decreased. Scanning electron microscopy (SEM) studies reveal that [C₁₄mim]Br had good dispersion in PP; thermogravimetric analysis (TGA) shows the addition of [C₁₄mim]Br remarkably increased the thermal stability of PP even though it is a small molecule.     

Aggregative structure of the 1‐octadecyl‐3‐methylimidazolium cation in the interlayer of montmorillonite and its effect on polypropylene melt intercalation

A series of organomontmorillonites were synthesized from pristine sodium montmorillonite via ion exchange in toluene with 1‐octadecyl‐3‐methylimidazolium chloride, a kind of ionic liquid with high thermal stability, as a modifier. The amount and aggregative state of the 1‐octadecyl‐3‐methylimidazolium cation ([C18mim]⁺) adsorbed in the interlayer of organomontmorillonite (MMT) were investigated with thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy, X‐ray diffraction (XRD), and differential scanning calorimetry. XRD patterns showed that [C18mim]⁺ was successfully intercalated into the interlayer of MMT, and the interlayer distances of the clays increased dramatically. On the basis of the TGA results, three types of arrangement models of [C18mim]⁺ could be seen, and they were related to the loading level of [C18mim]⁺ in the gallery of MMT. The effects of the aggregative structure of [C18mim]⁺ in the interlayer of MMT on polypropylene melt intercalation was also examined. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1252–1259, 2007     

Study of the behaviour of the azeotropic mixture ethanol–water with imidazolium-based ionic liquids

In this work, experimental data of isobaric vapour–liquid equilibria for the ternary system ethanol + water + 1-hexyl-3-methylimidazolium chloride ([C₆mim][Cl]) and for the corresponding binary systems containing the ionic liquid (ethanol + [C₆mim][Cl], water + [C₆mim][Cl]) were carried out at 101.300 kPa. VLE experimental data of binary and ternary systems were correlated using the NRTL equation. In a previous work [N. Calvar, B. González, E. Gómez, A. Domínguez, J. Chem. Eng. Data 51 (2006) 2178–2181], the VLE of the ternary system ethanol + water + [C₄mim][Cl] was determined and correlated, so we can study the influence of different ionic liquids in the behaviour of the azeotropic mixture ethanol–water.     

Solubilities of ammonia in basic imidazolium ionic liquids

Solubilities of ammonia in four conventional imidazolium ionic liquids: [C_nmim][BF₄] (n = 2, 4, 6, 8) have been measured. Isothermally fixed temperatures are 293.15, 303.15, 313.15, 323.15 and 333.15 K; the pressure is from 0 to 1.0 MPa. High solubilities of ammonia are found, and it is also found that the solubilities of ammonia increase when the length of cations’ alkyl increases (the ILs have the same anion), that is: [C₈mim]⁺ > [C₆mim]⁺ > [C₄mim]⁺ > [C₂mim]⁺. The solubility data have been correlated by the Krichevisky–Kasarnovsky equation, and then Henry's constants and partial molar volumes of NH₃ at infinite dilution are obtained. The thermodynamic properties such as solution enthalpy (Δ_solH), solution Gibbs free energy (Δ_solG), solution entropy (Δ_solS), and solution heat capacity (Δ_solC_p) of these systems are obtained.     

Theoretical study of interactions between 1-alkyl-3-methyimidazolium tetrafluoroborate and dibenzothiophene: DFT,NBO, and AIM analysis

Density functional theory is employed to study the interaction energies between dibenzothiophene (DBT) and 1-alkyl-3-methylimidazolium tetrafluoroborate ([C _n mim]⁺[BF₄]^?). The structures of DBT, 1-ethyl-3-methylimidazolium tetrafluoroborate ([C₂mim]⁺[BF₄]^?), 1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim]+[BF₄]?), 1-hexyl-3-methylimidazolium tetrafluoroborate ([C₆mim]⁺[BF₄]^?), 1-octyl-3-methylimidazolium tetrafluoroborate ([C₈mim]⁺[BF₄]^?), [C₂mim]⁺[BF₄]^?–DBT, [C₄mim]⁺[BF₄]^?–DBT, [C₆mim]⁺[BF₄]^?–DBT and [C₈mim]⁺[BF₄]^?–DBT systems are optimized systematically at the B3LYP/6-31G(d,p) level, and the most stable geometries are obtained by NBO and AIM analyses. The results indicate that DBT and imidazolium rings of ionic liquids are parallel to each other. It is found that the [BF₄]^? anion prefers to be located close to a C1–H9 proton ring in the vicinity of the imidazolium ring and the most stable gas-phase structure of [C _n mim]⁺[BF₄]^? has four hydrogen bonds between [C _n mim]+ and [BF₄]?. There are hydrogen bonding interactions, π–π and C–H–π interactions between [C₈mim]⁺[BF₄]^? and DBT, which is confirmed by NBO and AIM analyses. The calculated interaction energies for the studied ionic liquids can be used to interpret a better extracting ability of [C₈mim]⁺[BF₄]^? to remove DBT, due to stronger interactions between [C₈mim]⁺[BF₄]^? and DBT, in agreement with the experimental results of dibenzothiophene extraction by [C _n mim]⁺[BF₄]^?.     

Ambient temperature imidazolium-based ionic liquids with tetrachloronickelate(II) anions

Deep blue tetrachloronickelate(II) salts of 1-alkyl-3-methylimidazolium cations [C_nmim]⁺ with intermediate chain lengths (n = 5, 7, 8 and an n = 4/6 mixture) have been prepared from imidazolium chlorides and NiCl₂. They are liquid at ambient temperatures (ca. 20 °C) and above, and display viscosities and thermal stability comparable to related [BF₄]⁻ compounds. The similarities may reflect the compensating effects of the dinegative charge of the [NiCl₄]²⁻ ion and its larger size.     

Ionic liquids as porogens in the microwave-assisted synthesis of methacrylate monoliths for chromatographic application

Several imidazolium-based ionic liquids (ILs) with varying cation alkyl chain length (C₄–C₁₀) and anion type (tetrafluoroborate ([BF₄]⁻), hexafluorophosphate ([PF₆]⁻) and bis(trifluoromethylsulfonyl)imide ([Tf₂N]⁻)) were used as reaction media in the microwave polymerization of methacrylate-based stationary phases. Scanning electron micrographs and backpressures of poly(butyl methacrylate-ethylene dimethacrylate) (poly(BMA-EDMA)) monoliths synthesized in the presence of these ionic liquids demonstrated that porosity and permeability decreased when cation alkyl chain length and anion hydrophobicity were increased. Performance of these monoliths was assessed for their ability to separate parabens by capillary electrochromatography (CEC). Intra-batch precision (n = 3 columns) for retention time and peak area ranged was 0.80–1.13% and 3.71–4.58%, respectively. In addition, a good repeatability of RSD_{Retention time} = <0.30% and ∼1.0%, RSD_{Peak area} = <1.30% and <4.3%, and RSD_Efficiency = <0.6% and <11.5% for intra-day and inter-day, respectively exemplify monolith performance reliability for poly(BMA-EDMA) fabricated using 1-hexyl-3-methylimidazolium tetrafluoroborate ([C₆mim][BF₄]) porogen. This monolith was also tested for its potential in nanoLC to separate protein digests in gradient mode. ILs as porogens also fabricated different alkyl methacrylate (AMA) (C4–C18) monoliths. Furthermore, employing binary IL porogen mixture such as 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim][BF₄]) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim][Tf₂N]) successfully decreased the denseness of the monolith, than when using [C₄mim][Tf₂N] IL alone, enabling a chromatographic run to be performed with 1:1 ratio produced baseline separation for the analytes. The combination of ILs and microwave irradiation made polymer synthesis very fast (∼10 min), entirely green (organic solvent-free) and energy saving process.     

Study on the Conductivities of Pure and Aqueous Bromide-Based Ionic Liquids at Different Temperatures

Electrical conductivities were measured for the pure ionic liquids [C₆mim][Br] (1-hexyl-3-methylimidazolium bromide) and [C₈mim][Br] (1-octyl-3-methylimidazolium bromide) at 0.1 MPa from 293.15 to 333.15 K. Conductivity measurements were also made for the binary water + [C₆mim][Br] and water + [C₈mim][Br] systems and their ternary water + [C₆mim][Br] + [C₈mim][Br] system at 0.1 MPa and 293.15, 298.15, and 303.15 K. The conductivity data of the pure ionic liquids were correlated by the VFT (Vogel-Tamman-Fulcher) equation, and the fitting parameters and mean absolute deviations were determined. New explanations are presented for the molality-dependent behavior of the conductivity of the binary water + [C₆mim][Br] and water + [C₈mim][Br] systems. The generalized Young’s rule and the semi-ideal solution theory for conductivity were used to predict the conductivities of the ternary water + [C₆mim][Br] + [C₈mim][Br] system from the conductivities of its corresponding binary water + [C₆mim][Br] and water + [C₈mim][Br] subsystems. The predictions are in good agreement with the measured values.     

Adsorption and Purification of Baicalin from Scutellaria baicalensis Georgi Extract by Ionic Liquids (ILs) Grafted Silica

Baicalin which has multiple biological activities is the main active component of the root of Scutellaria baicalensis Georgi (SBG). Although its isolation and purification by adsorption methods have aroused much interest of the scientific community, it suffered from the poor selectivity of the adsorbents. In this work, an environmentally benign method was developed to prepare ionic liquids (ILs) grafted silica by using IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim]NTf₂) and ethanol as reaction media. The IL 1-propyl-3-methylimidazolium chloride ([C₃mim]Cl) grafted silica ([C₃mim]⁺Cl⁻@SiO₂) was used to adsorb and purify baicalin from the root extract of Scutellaria baicalensis Georgi (SBG). Experimental results indicated that the adsorption equilibrium can be quickly achieved (within 10 min). The adsorption behavior of [C₃mim]⁺Cl⁻@SiO₂ for baicalin was in good agreement with Langmuir and Freundlich models and the adsorption was a physisorption process as suggested by Dubinin–Radushkevich model. Compared with commercial resins, [C₃mim]⁺Cl⁻@SiO₂ showed the strongest adsorption ability and highest selectivity. After desorption and crystallization, a purity of baicalin as high as 96.5% could be obtained. These results indicated that the ILs grafted silica materials were promising adsorbents for the adsorption and purification of baicalin and showed huge potential in the purification of other bioactive compounds from natural sources.     

Kinetic study of the oxidative addition of methyl iodide to Vaska’s complex in ionic liquids

Oxidative addition of methyl iodide to Vaska’s complex in the ionic liquids 1-butyl-3-methylimidazolium triflate [C₄mim][OTf], [C₄mim] bis(trifluormethylsulfonyl)imide [Tf₂N], and N-hexylpyridinium [C₆pyr][Tf₂N] occurred cleanly to give the expected Ir(III) oxidative addition product. Pseudo-first order rate constants were determined for the oxidative addition reaction in each solvent ([Vaska’s] = 0.25 mM, [CH₃I] = 37.5 mM). The observed rate constants under these conditions were 5-10 times slower than the rate seen in DMF. At high methyl iodide concentrations (>23 mM), the expected first order dependence on methyl iodide was not observed. In each ionic liquid, there was no change in the reaction rates within experimental error over the methyl iodide concentration range of 23-75 mM. At lower methyl iodide concentration, a decrease in rate was observed in [C₄mim][Tf₂N] with decreasing concentration of methyl iodide.     

Formation of metastable crystals of [C4mim][NTf2] and [C6mim][NTf2]

Heat capacities of crystalline 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [C₄mim][NTf₂] and 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [C₆mim][NTf₂] in the range 80 K-T_fus were measured in an adiabatic calorimeter. Anomalies in the heat-capacity curves for the both compounds occurred near 240 K. Positions of the anomalies depended on thermal history of the samples. More stable crystals had higher heat capacities in the range 220-260 K. Below 200 K heat capacities of all the crystals of the same compound were indistinguishable.     

LLE for (water + ionic liquid) binary systems using [Cxmim][BF4] (x = 6, 8) ionic liquids

Liquid–liquid equilibrium diagrams were determined for (IL + water) systems using the family of ILs 1-alkyl-3-methylimidazolium tetrafluoroborates, where the alkyl groups are hexyl and octyl ([C_xmim][BF₄] with x = 6 and 8). The gravimetric method was used to determine the equilibrium compositions at temperatures ranging from 278.15 to 340.15 K. Both systems present an upper critical solution temperature (UCST), which increases from [C₆mim][BF₄] to [C₈mim][BF₄]. The experimental data were correlated using the NRTL and eNRTL models. The binary interaction parameters were calculated for each system and model, and good agreement between experimental and calculated equilibrium compositions was obtained. Finally, the apparent Gibbs energy, enthalpy and entropy of water solution in the ILs were calculated using a modified van’t Hoff equation. The three thermodynamic functions were found to be positive for both ILs.     

Selection of entrainers in the 1-hexene/n-hexane system with a limited solubility

Vapor-liquid equilibria (VLE) have been measured for five 1-hexene/n-hexane/ionic liquid systems and 1-hexene/n-hexane/NMP (N-methyl-2-pyrrolidone) system with a headspace-gas chromatography (HSGC) apparatus at 333.15 K. The ionic liquids investigated were 1,3-dimethylimidazolium tetrafluoroborate [C₂MIM]⁺[BF₄]⁻, 1-butyl-3-methylimidazolium tetrafluoroborate [C₄MIM]⁺[BF₄]⁻, 1-methyl-3-octylimidazolium tetrafluoroborate [C₈MIM]⁺[BF₄]⁻, 1,3-dimethylimidazolium dicyanamide [C₂MIM]⁺[N(CN)₂]⁻ and 1-octylquinolinium bis(trifluoromethylsulfonyl)amide [C₈Chin]⁺[BTA]⁻. It was found that at low feeding concentration of 1-hexene and n-hexane, the separation ability of ionic liquids is in the order of [C₂MIM]⁺[BF₄]⁻ > [C₄MIM]⁺[BF₄]⁻ ≈ [C₂MIM]⁺[N(CN)₂]⁻ > [C₈MIM]⁺[BF₄]⁻ > [C₈Chin]⁺[BTA]⁻, which is consistent with the priori prediction of the COSMO-RS (conductor-like screening model for real solvents) model. But at high feeding concentration, the separation ability of ionic liquids is in the order of [C₂MIM]⁺[BF₄]⁻ < [C₄MIM]⁺[BF₄]⁻ ≈ [C₂MIM]⁺[N(CN)₂]⁻ < [C₈MIM]⁺[BF₄]⁻ < [C₈Chin]⁺[BTA]⁻. The liquid demixing effect should be taken into account. The activity coefficients of 1-hexene and n-hexane at infinite dilution calculated with the COSMO-RS model were correlated using the NRTL, Wilson and UNIQUAC model. In this work the predictive results from the COSMO-RS model and UNIFAC model for the 1-hexene/n-hexane and 1-hexene/n-hexane/NMP systems were compared. The UNIFAC model is one of the most important academic contributions by Prof. Jürgen Gmehling.     

A new disposable ionic liquid based coating for headspace solid-phase microextraction of methyl tert-butyl ether in a gasoline sample followed by gas chromatography-flame ionization detection

A new ionic liquid (IL) based solid-phase microextraction (SPME) fiber was investigated and used for headspace (HS) extraction of methyl tert-butyl ether (MTBE) in a gasoline sample. Using the new IL coated HS-SPME fiber with the combination of gas chromatography-flame ionization detection (GC-FID); sub-to-low μg L⁻¹ concentrations of MTBE were detected. Four different ILs including 1-butyl-3-methylimidazolium tetraflouroborate ([C₄C₁IM] [BF₄]), 1-octyl-3-methylimidazolium tetraflouroborate ([C₈C₁IM] [BF₄]), 1-octyl-3-methylimidazolium hexaflourophosphate ([C₈C₁IM] [PF₆]) and 1-ethyl-3-methylimidazolium ethylsulphate ([C₂C₁IM] [ETSO₄]) were synthesized and examined for extraction, preconcentration and determination of MTBE. It was observed that [C₈C₁IM] [BF₄] showed the highest extraction efficiency and possessed the best extractability for MTBE. The fiber coating takes up the compounds from the sample by absorption in the case of liquid coatings. The calibration graph was linear in a concentration range of 1-120 μg L⁻¹ (R² > 0.994) with the detection limit of 0.09 μg L⁻¹ level. The new IL-coated fiber was applied successfully for the determination of MTBE in a gasoline sample with good recoveries between 90 and 95%.     

Ionic Liquid-Induced Structural and Activity Changes in Hen Egg White Lysozyme

Lysozyme crystals in the presence of 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim]BF₄), 1-butyl-3-methylimidazolium chloride ([C₄mim]Cl), 1-butyl-3-methylimidazolium bromide([C₄mim]Br), and 1,3-dimethylimidazolium iodine([dmim]I) were prepared, and the influence of ionic liquids (ILs) on the structure and activity change of lysozyme was investigated. Fourier transform infrared spectroscopy revealed the major secondary structures of α-helix and β-sheet for lysozyme. It was interesting to note that increases of the band near 2,935 and 1,656 cm^?1 from Raman spectroscopy are attributed to the unfolding of lysozyme molecules. A shift in amide III from 1,230 to 1,270 cm^?1 in adding [dmim]I occurs, indicating a transformation from β-sheet to random coil. With regard to adding [C₄mim]BF₄, [C₄mim]Cl, and [C₄mim]Br, α-helix and β-sheet are the predominant structures for lysozyme. The activity study showed that the ILs used brought a positive effect. Especially, [dmim]I leads to a drastic increase in relative activity, and its value reaches 50 %.     

Effect of a copolymer poly(4-styrenesufonic acid-co-maleic acid) sodium salt on aggregation behavior of surface active ionic liquid 1-tetradecyl-3-methylimidazolium bromide and structurally similar conventional surfactant tetradecyltrimethylammonium bromide in aqueous media

The complex formation of anionic copolymer poly(4-styrenesufonic acid-co-maleic acid) sodium salt (PSSA-co-MA) with surfactant tetradecyltrimethylammonium bromide (TTAB) and surface active ionic liquid (SAIL) 1-tetradecyl-3-methylimidazolium bromide ([C₁₄mim][Br]) has been studied in aqueous media by utilizing various techniques such as tensiometry, conductometry and fluorimetry. Conductometric and tensiometric curve of all the investigated systems demonstrate four break points corresponding to four transition states. All the thermodynamic and surface properties of surfactant-polyelectrolyte systems have been determined by conductance and surface tension measurements respectively. The value of cmc decreases with increasing the concentration of polyelectrolyte for studied systems. But it has been observed that, the lowering in cmc values is more in [C₁₄mim][Br]-PSSA-co-MA system than TTAB-PSSA-co-MA system, although the differences in cmc are not much significant. The lowering in cmc of [C₁₄mim][Br]-PSSA-co-MA system shows that ionic attractions between cationic head group [C₁₄mim]⁺ and anionic parts (SO₃^? and COOH), are stronger than those in TTA⁺ and anionic parts (SO₃^? and COOH). The results indicated that the [C₁₄mim][Br]-PSSA-co-MA complexes are comparatively more surface active than TTAB-PSSA-co-MA complexes. The fluorescence probe behaviour also confirms cmc value and provides aggregation number (N_agg). Finally all the findings of [C₁₄mim][Br] and TTAB have been compared.     

Extraction and high performance liquid chromatographic determination of 3-indole butyric acid in pea plants by using imidazolium-based ionic liquids as extractant

In this paper, imidazolium-based ionic liquids [C₄mim][PF₆], [C₆mim][PF₆], [C₈mim][PF₆], [C₆mim][BF₄] and [C₈mim][BF₄] were tested as extracting solvents for removal of 3-indole butyric acid (IBA) from aqueous media with subsequent determination using HPLC. Percent extraction of IBA was strongly affected by pH of aqueous phases and the chemical structures of ionic liquids (ILs). Extraction of IBA was quantitative in the pH values lower than pK_a of IBA. Considering both extraction and stripping efficiencies of IBA, [C₄mim][PF₆] was found to act more efficient than other studied ILs. Capacity of [C₄mim][PF₆] was 17.6 × 10⁻⁴ mmol IBA per 1.0 mL of IL. Ionic strength of aqueous phase and temperature had shown no serious effects on extraction efficiency of IBA. A preconcentration factor of 100 and a relative standard deviation of 1.16% were obtained. It was found that ionic liquid phase was reusable almost five times for extraction/stripping purposes. 3-Indole acetic acid showed interferential effect in the extraction step. In order to assess the applicability of the method, extraction and stripping of IBA from pea plants and some other samples were studied.     

Ionic liquid 1-ethyl-3-methylimidazolium acetate: an attractive solvent for native chemical ligation of peptides

The ionic liquid 1-ethyl-3-methylimidazolium acetate ([C₂mim][OAc]) was successfully used as alternative solvent for native chemical ligation of peptide fragments to produce model peptide LYRAXCRANK (X = G, A, L, N, Q, K, and F). The commonly used buffer system including thiol additives such as thiophenol and benzyl mercaptan can be replaced by the nontoxic ionic liquid [C₂mim][OAc]. In addition to improving the solubility of the peptides in [C₂mim][OAc], yields and rates of the ligation reactions were found to be efficiently enhanced.     

有机阳离子[C18mim]＋在蒙脱土层间的物理化学吸附与聚集状态*

咪唑基离子液体(N鄄十八烷基鄄N忆鄄甲基溴化咪唑盐[C18mim]Br)中的[C18mim]+可以通过离子交换反应进入蒙脱土层间.本文用TGA、FTIR和XRD 研究了[C18mim]+在蒙脱土层间的物理和化学吸附及其聚集状态. 研究结果表明, 蒙脱土存在着饱和的化学吸附量, 其总吸附量随物理吸附量的增加而增加；随着[C18mim]+在蒙脱土层间吸附量的增加, 其聚集态结构的有序性增加, 并伴有分子链的构象变化,导致层间距的增加.     

High performance electromechanical actuators based on ionic liquid/poly(vinylidene fluoride)

Due to the increasing need of low voltage actuators, independent from electrochemical processes, electroactive actuators based on poly(vinylidene fluoride) composites with 10, 25 and 40% of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [C₂mim] [NTf₂], ionic liquid are prepared by solvent casting and melting. We show that the charge structure of [C₂mim] [NTf₂] induces the complete piezoelectric β-phase crystallization of the PVDF within the composite and decreases its crystallinity fraction significantly. [C₂mim] [NTf₂] also works as a plasticizer of PVDF, reducing the elastic modulus down to 12% of the initial value. Moreover, the composites show significant displacement and bending under applied voltages of 2, 5 and 10 Vpp. The displacement and bending of the composite membranes are also evaluated as a function of [C₂mim] [NTf₂] content and sample thickness. Increasing amounts of ionic liquid result in larger deformations independently of the applied voltage.