Synthesis of furanyl- and triazolyl-containing α-CF3-α-hydroxy acids and their derivatives

Russian Chemical Bulletin - Starting from methyl trifluoropyruvate, α-CF3-substituted α-methoxy-α-(furan-2-yl) acetic acids and their derivatives and also methyl...     

Synthesis and characterization of poly(styrene/α-t-butoxy-ω-vinylbenzyl-polyglycidol) microspheres

Polystyrene microspheres with polyglycidol (polyGL) in a surface layer were synthesized in batch radical emulsifier-free emulsion copolymerizations of styrene and surfmers, α-t-butoxy-ω-vinylbenzyl-polyGL macromonomers (VB-polyGL). Macromonomers with number-average molecular weight Mˉ _n=950 (VB-polyGL950) and Mˉ _n=2700 (VB-polyGL2700) were used for these polymerizations. In all syntheses the initial concentrations of styrene and initiator (K₂S₂O₈) were constant. The initial macromonomer-to-styrene ratios were varied from 1.10 × 10⁻³ to 1.64 × 10⁻² mol/mol and from 3.46 × 10⁻⁴ to 3.47 × 10⁻³ mol/mol for VB-polyGL950 and VB-polyGL2700, respectively. The diameters of microspheres obtained were smaller for the syntheses with higher concentrations of macromonomers. Syntheses with VB-polyGL950 yielded microspheres with number-average diameters (Dˉ _n) from 216 to 900 nm and with a bimodal diameter distribution. The number-average diameters of microspheres obtained with VB-polyGL2700 varied from 220 to 650 nm, depending on the initial concentration of macromonomer. Their diameter distributions were monomodal, with a diameter polydispersity parameter (ratio of weight-average and number-average diameters) in the range 1.007≤Dˉ _w/Dˉ _n≤1.022. For each type of microsphere the fraction of polyGL in a surface layer and the surface concentration of sulfate anions were determined. The fraction of polyGL in the surface layer was related to the initial monomer composition in the polymerizing mixture. Adsorption of human serum albumin onto surfaces of some poly(styrene/VB-polyGL) microspheres was up to 10 times lower than for the polystyrene microspheres obtained in a similar emulsifier-free emulsion polymerization of styrene. Received: 26 September 2000/Accepted: 19 February 2001     

Synthesis and characterization of silver—poly(methylmethacrylate) nanocomposites

The optical properties of silver nanoparticles embedded in poly(methylmethacrylate) (PMMA) was investigated as well as the influence of silver nanoparticles on the thermal properties of polymer matrix. The average size and particle size distribution of silver nanoparticles was determined using transmission electron microscopy. The obtained transparent nanocomposite films were optically characterized using UV-Vis and FTIR spectroscopy. Thermal stability of polymer matrix was improved upon incorporation of small amount of silver nanoparticles. Also, silver nanoparticles have pronounced effect on thermo-oxidative stability of PMMA matrix. The glass transition temperatures of nanocomposites are lower compared to the pure polymer.     

Synthesis and characterization of trimethoxysilyl-functionalized poly(phthalazinone ether ketone)

A novel alkoxysilyl-functionalized poly(phthalazinone ether ketone)(PPEK)was prepared for the boundary lubricant application in micro-electro-mechanical system(MEMS).The synthesis of functionalized PPEK was started from the hydro- xylation of PPEK,then following with the corresponding ring-opening reaction of 3-glycidoxypropyltrimethoxysilane(GPTMS). The structures of the functional PPEK were confirmed by FTIR,~1H NMR,~(29)Si NMR,and UV-vis spectrum.     

Synthesis of trifluoromethylated α-hydroxy acids and their derivatives based on alkyl trifluoropyruvates

The reactions of trifluoropyruvates with nitromethane and arylmagnesium bromides leading to trifluoromethyl-containing α-hydroxy acid esters were studied and various derivatives of the acids were obtained.     

Surface perspectives in the biomedical applications of poly(α-hydroxy acid)s and their associated copolymers

Impressive advances in biotechnology, bioengineering, and biomaterials with unique properties have led to increased interest in polymers and other novel materials in biological and biomedical research and development over the past two decades. Although biomaterials have already made an enormous impact in biomedical research and clinical practice, there is a need for better understanding of the surface and interfacial chemistry between tissue (or cells) and biomedical materials. This is because the detailed physicochemical events related to the biological response to the surface of materials still often remain obscure, even though surface properties are important determinants of biomedical material function. In this regard, data available in the literature show the complexity of the interactions (surface reorganization, non-specific/specific protein adsorption, and chemical reactions such as acid-base, ion pairing, ion exchange, hydrogen bonding, divalent-ion bridging) and the interrelationship between biological environments, interfacial properties, and surface functional groups responsible for the biological responses. Because of the multidisciplinary nature of surface and interfacial phenomena at the surface of biomedical polymers, this review focuses on several aspects of current work published on poly(alpha-hydroxy acid)s and their associated copolymers:surface structure-biomedical function relationships;physicochemical strategies for surface modification; and, finally,synthetic strategies to increase biocompatibility for specific in-vivo and/or in-vitro biomedical applications.     

Synthesis of poly(ε-caprolactone) diols and EO-CL block copolymers and their characterization by liquid chromatography and MALDI-TOF-MS

Polymers of ε-caprolactone were synthesized by microwave-assisted polymerization initiated with polyethylene glycols (PEG 200 and PEG 300) and monodisperse diols (mono-, di-, tri-, tetra- and hexaethylene glycol) and tin octoate as catalyst. These polymers were characterized by different chromatographic techniques (SEC, LAC and LCCC) and MALDI-TOF-MS. A comparison with commercially available polycaprolactone diols with molecular weight 530 and 830 showed that the new polymers had a much higher content of triblock structures, while the commercial samples contained considerable amounts of diblocks.     

Synthesis and characterization of poly(ethylene glycol) based β-cyclodextrin polymers

A series of novel water soluble β-cyclodextrin (βCD) polymers has been synthesized from functionalized poly(ethylene glycol) (PEG). The chemical composition of the polymers has been characterized by ¹H NMR and the βCD content is found to be between 48 and 33% (w/w). The molecular weight has been determined by Size Exclusion Chromatography (SEC) and depends on the ratio between βCD and PEG, varying from 2.1 × 10⁴ to 8.6 × 10⁴ g mol^?1. The physico chemical properties have been characterized by differential scanning calorimetry (DSC), viscometry and isothermal titration calorimetry (ITC). ITC shows that the polymers have association constants comparable to βCD with different guest molecules, indicating a good accessibility of the CDs.     

Synthesis and characterization of calixarene-based poly(ε-caprolactone) stars catalyzed by yttrium complex

Two calixarene derivatives (2a, 2b) have been synthesized and used as macro-initiators to prepare star-shaped poly(ε-caprolactone)s (SPCLs) via controlled ringopening polymerization of ε-caprolactone in the presence of yttrium tris(2,6-di-tert-butyl-4-methylphenolate) [Y(DBMP)₃]. The molecular weight of SPCLs was characterized by end group ¹H-NMR analyses and size-exclusion chromatography (SEC). The results indicate that SPCLs based on a calix[4]arene derivative (2a) are well-defined four-arm star polymers with reasonably narrow molecular weight distributions in the given molecular weight range, while SPCLs based on a calix[6]arene derivative (2b) are star polymers with not so defined structures. Differential scanning calorimetry (DSC) analyses suggest that the maximal melting point, the crystallization temperature and the degree of crystallinity of SPCLs increases with the increasing molecular weight and are lower than those of the liner poly(ε-caprolactone) (LPCL) counterpart. Furthermore, polarized optical microscopy (POM) indicates that SPCL exhibits irregular spherulites with poor morphology and slower crystallization rate, whereas LPCL shows fast crystallization rate and good spherulitic morphology. __________ Translated from Acta Polymerica Sinica, 2007, 10: 967–973 [译自:高分子学报]     

Synthesis and characterization of dendronized poly(methylsiloxane) with appendent Fréchet-type dendrons

A new kind of dendronized poly(methylsiloxane) (3a and 3b) with appendent Fre-chet-type poly(aryl ether) dendrons has been synthesized and characterized by GPC, DSC, TGA, fluorescence and UV-Vis spectra.     

Synthesis of (α-substituted α-aminophosphinic and α-aminophosphonic acids

The reaction of ketoximes with hypophosphorous acid resulted in previously unknown -substituted--aminophosphinic acids, which were oxidized into the corresponding -substituted--aminophosphonic acids.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2729–2732, November, 1996.     

Synthesis and micellar characterization of thermosensitive amphiphilic poly(ε-caprolactone)-b-poly(N-vinylcaprolactam) block copolymers

Poly(ε-caprolactone)-b-poly(N-vinylcaprolactam) (PCL-b-PVCL) block copolymers were synthesized as new biocompatible, thermosensitive, amphiphilic block polymers by a combination of ring-opening polymerization and reversible addition–fragmentation chain transfer (RAFT) polymerization, and their thermosensitive micellar behavior was examined. The PCL macro-chain-transfer agent was first synthesized by converting the end group of PCL-OH to O-ethyl xanthate, which was subsequently used for the RAFT polymerization of N-vinylcaprolactam. The critical micelle concentration of PCL-b-PVCL (M _n,NMR?=?56,300?g/mol, polydispersity index?=?1.18) was 0.026?mg/mL. The mean diameter of the PCL-b-PVCL micelles determined by transmission electron microscopy was 55?±?25?nm. The PCL-b-PVCL micelles exhibited repetitive aggregation and dispersion during reversible cooling and heating cycles between 20 and 40?°C due to the thermosensitive behavior of the PVCL shell. Overall, the PCL-b-PVCL block copolymers have potential applications in thermosensitive drug delivery applications.     

Synthesis of α-hydroxy(polyprenyl) bisphosphonates

Bisphosphonates derived from natural terpenes were synthesized by phosphonylation of corresponding aldehydes. The general strategy of introduction of the phosphonate groups into the polyprenol molecule involves successive treatment of a hydroxyl compound by Swern reagent to oxidize the C-OH group into C=O and a (EtO)₃P/[PyH]⁺ClO _? ⁴ mixture to phosphylate the resulting carbonyl compound.     

Synthesis and characterization of inclusion complexes of aliphatic-aromatic poly(Schiff base)s with β-cyclodextrin (highlight)

This paper describes the formation of polymer inclusion complexes(polymer-CD-ICs) between β-cyclodextrin(β-CD) and aliphatic-aromatic poly(Schiff base)s. Fourier transform infrared(FTIR) spectroscopy, ¹H nuclear magnetic resonance spectroscopy(¹H-NMR), thermogravimetric analysis(TGA) and X-ray diffraction(XRD) have been used to observe the formation of polymer-CD-ICs. In FTIR spectra, the characteristic peaks of β-CD at 3391 cm⁻¹ shifted to 3418 cm⁻¹ and the intense peak at 1602 cm⁻¹ due to the –C = N– stretching vibration diminished after formation of inclusion complexes. Compared the ¹H-NMR of polymer-CD-ICs with β-CD, the chemical shift of the protons H-3, H-5 have shifted to higher field after the formation of inclusion complexes, which is perhaps due to the interaction of these protons with polymers. The TGA analysis revealed that the polymer-CD-ICs had better thermal stability than β-CD, suggesting that the polymer increased the stability of β-CD. The X-ray diffraction patterns displayed that the strong peak for both polymer-CD-ICs at approximately 20.0° (2θ) may confirm their IC formation.     

Synthesis and characterization of a functionalized amphiphilic diblock copolymer: MePEG-b-poly(DL-lactide-co-RS-β-malic acid)

A class of novel amphiphilic diblock copolymer of MePEG-b-poly(DL-lactide-co-RS-β-malic acid) has been synthesized via the hydrogenation over palladium on charcoal of MePEG-b-poly(DL-lactide-co-RS-β-benzyl malolactonate), which was prepared by ring-opening copolymerization of DL-lactide and RS-β-benzyl malolactonate (MABz) using methyl-polyethylene glycol (MePEG) as the initiator and stannous octoate as the catalyst. The influence of copolymerization temperature, reaction time, macro-initiator (MePEG-5000) proportion and monomer ratio was studied. Gel permeation chromatography measurements revealed that the molecular weight decreased with increasing MABz feeding dose. The configurational structures of the protected and de-protected copolymers were determined by ¹³C nuclear magnetic resonance (NMR), ¹H NMR and Fourier transform infrared. A water-swollen core of the nanospheres formed from the de-protected copolymer was discovered by transmission electron microscopy measurement. Additionally, the degradation experiments indicated that more hydrophilic malic acid content led to higher degradation rate.     

Synthesis and characterization of organotitanium substituted heteropolytungstosilicates and their biological activity

Tris-, di-(organotitanium) substituted tungstosilicates α、β-[(CpTi)3(SiW9O37)]7- and γ-[(Cp-Ti)2(SiW10O38)]6- were prepared by the reaction of Cp2TiCl2 (Cp = η5-C5H5) with α、β-SiW9O349- (noted α、β-SiW9), γ-SiWO368- (noted γ-SiW10) . The products were characterized by means of elemental analysis, IR, 1H NMR, 183W NMR and polarography. 183W NMR spectra of the complexes support the stoichiometry of the new heteropolyanions and the probable retention of the A-XWg or γ-SiW10 units. And the organotitanium substituted compounds showed promising in vitro antitumor activity in two of human tumor cell lines.     

Solubilization of silica nanoparticles in alkanes and poly(α-olefin)s by functionalized polyisobutylene oligomers

Covalent and noncovalent chemical methods that use oligomeric lipophilic agents to solubilize silica nanoparticles in heptane and poly(α-olefin) (EPAO) solvents are described. While only modest solubilization efficiencies are seen with an octadecyl group, a variety of terminally functionalized polyisobutylene (PIB) derivatives are more efficient. Both covalent and noncovalent chemistry was found to be effective. Covalent modification solubilized up to 34 wt% of silica nanoparticles (SiNPs) as stable solutions in heptane or PAOs. Noncovalent modification was however more effective, solubilizing up to 70% of SiNPs in heptane or PAOs. The most successful covalent approach used PIB oligomers containing terminal triethoxysilane groups to covalently modify SiNPs. Alternatively, SiNPs that were first functionalized with amine groups could be solubilized in heptane or PAOs with polyisobutylene containing sulfonic acid groups using acid–base chemistry. Studies of these and other solubilization chemistry was also carried out using fluorescent labels, studies that confirmed the gravimetric analyses of the heptane-solubilized SiNPs. Transmission electron microscopy of a PAO solution of these solutions showed that these SiNPs were present as small aggregates dispersed in the PAOs.