Synthesis and electroluminescence properties of carbazole-containing 2,6-naphthalene-based conjugated polymers

Three types of carbazole containing 1,5-disubstituted poly(2,6-naphthalene) derivatives, i.e., 2,6-naphthalene homopolymer that has a carbazolyl side chain at 1,5-positions, random copolymers and alternating copolymers consisting of 1,5-dialkoxynaphthalene-2,6-diyl and N-phenylcarbazole-2,7-diyl were newly synthesized by Ni-mediated Yamamoto polycondensation and Pd-catalyzed Suzuki coupling reaction. The number-average molecular weights (M_n) of the polymers and their polydispersity indices (M_w/M_n) were 5.4-8.2 × 10³ and 1.4-1.7, respectively. These polymers exhibited blue photoluminescence in the film states and high fluorescence quantum efficiencies in CHCl₃ (?_fl = 0.70-1.00). The electroluminescence properties of these polymers were investigated by fabricating a PLED device that has a configuration of ITO/PEDOT(PSS)/polymer/CsF/Al. The device fabricated with the random copolymer exhibited highest performances showing a maximum brightness of 8370 cd/m² at 13 V and a maximum efficiency of 2.16 cd/A at 7 V.     

Liquid crystalline and photoactive poly[4,4′-stilbeneoxy]alkylbiphenylphosphates

A series of liquid crystalline and photoactive polymers were synthesized from biphenylphosphorodichloridate with various 4,4′-bis(m-hydroxyalkyloxy)stilbenes (m = 2, 4, 6, 8, 10) in chloroform by solution polycondensation method using an acid scavenger. The resultant polymers were characterized by inherent viscosity, FT-IR, ¹H, ¹³C and ³¹P NMR spectroscopies. The liquid crystalline (LC) properties were studied using HOPM and DSC and it was inferred that out of the five polymers synthesized, higher methylene chain containing polymers (m = 6, 8, 10) exhibited LC properties. Thermogravimetric analysis revealed that all the polymers were stable in between 290 and 367 °C and underwent degradation thereafter. The thermal stability and char yield of the polymers decreased with increase in flexible methylene chain. The photochemical properties of these polymers were investigated by UV and fluorescence spectroscopy. Crosslinking proceeds via 2π-2π cycloaddition reaction of the -CHCH- of the stilbene moieties. The rate of crosslinking increases with increase in methylene chain length in the polymer backbone. The fluorescence spectra showed that the longer methylene spacer containing polymers exhibited larger red-shifts than the shorter spacer containing polymers.     

Preparation of cobalt-tetraphenylporphyrin/reduced graphene oxide nanocomposite and its application on hydrogen peroxide biosensor

A novel cobalt-tetraphenylporphyrin/reduced graphene oxide (CoTPP/RGO) nanocomposite was prepared by a π–π stacking interaction and characterized by ultraviolet–visible absorption spectroscopy (UV–vis), Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS). The CoTPP/RGO nanocomposite exhibited high electrocatalytic activity both for oxidation and reduction of H₂O₂. The current response was linear to H₂O₂ concentration with the concentration range from 1.0 × 10⁻⁷ to 2.4 × 10⁻³ mol L⁻¹ (R = 0.998) at the reductive potential of −0.20 V and from 1.0 × 10⁻⁷ to 4.6 × 10⁻⁴ mol L⁻¹ (R = 0.996) at the oxidative potential of +0.50 V. The H₂O₂ biosensor showed good anti-interfering ability towards oxidative interferences at the oxidative potential of +0.50 V and good anti-interfering ability towards reductive interferences at the reductive potential of −0.20 V.     

Comparative study of photoelectric properties of a copolymer and the corresponding homopolymers based on poly(3-alkylthiophene)s

As semiconducting materials in organic light-emitting devices (OLEDs), a novel, highly soluble poly[(3-octylthiophene)-co-(3-(2-ethyl-1-hexylthiophene))] (P3OTIOT) and the corresponding homopolymers (poly(3-octylthiophene) (P3OT) and poly(3-isooctylthiophene) (P3IOT)) were prepared by an FeCl₃-oxidative approach to compare their photoelectric properties. Characterization of the polymers included FT-IR, ¹H NMR, gel permeation chromatography (GPC), thermo-gravimetric analysis (TGA), UV-vis spectroscopy, photoluminescence (PL) and electroluminescence (EL). P3OTIOT and P3OT depicted excellent solubility in common organic solvents. TGA studies showed that all of the materials exhibited very good thermal stabilities, losing 5% of their weight on heating to 300 °C. The optical property investigations showed that the band-gap energy of P3OTIOT was similar to that of P3OT (2.43 eV) at 2.45 eV and 6% lower than that of P3IOT (2.6 eV) in CHCl₃ solution. In PL spectra, the emission maxima of P3OTIOT and P3IOT were 50 nm and 130 nm blue-shifted with respect to that of P3OT, respectively. However, the PL intensity of P3OTIOT was seven times higher than that of P3OT. Single layer polymer light-emitting devices (PLEDs) with the ITO/polymer/Ag configurations were fabricated by the spin-coating method with P3OT, P3IOT and P3OTIOT as the EL materials, which exhibited red (650 nm), orange-red (610 nm) and yellow-green (525 nm) EL, respectively. The external EL quantum efficiencies (QE) of P3IOT and P3OTIOT devices are 6.4 × 10⁻³% and 5.1 × 10⁻³% which are about five and four times higher than that of the P3OT device (1.2 × 10⁻³%), respectively. The turn-on voltage of the P3OTIOT device (5 V) is between that of the P3OT (4.5 V) and P3IOT (6 V) devices. These results indicated that the P3OTIOT combined the photoelectric properties of P3OT and P3IOT with excellent solubility, processability, low band-gap energy, high QE and low turn-on voltage in the PLEDs, and they might be excellent polymeric materials for applications in organic light-emitting diodes, light-emitting electrochemical cells and polymer solar cells.     

Synthesis, characterization and electrochromic properties of copolymer of 3-{[4-(thien-3-yl-methoxy)phenoxy]methyl}thiophene with thiophene

(3-{[4-(Thien-3-yl-methoxy)phenoxy]methyl}thiophene) (TMPMT) was synthesized via the reaction of 3-bromomethylthiophene with hydroquinone and characterized by nuclear magnetic resonance (NMR) and Fourier transform infrared spectroscopy (FTIR). Electrochemical copolymerization of TMPMT with thiophene in acetonitrile/boron trifluoride diethyl etherate (AN/BFEE) solvent mixture was achieved using tetrabutylammonium tetrafluoroborate (TBAFB) as the supporting electrolyte. Resulting copolymer was characterized via cyclic voltammetry (CV), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), four probe technique conductivity measurement and UV-Vis spectroscopy. Spectroelectrochemical analysis of the copolymer [P(TTMT-co-Th)] revealed that π-π^∗ electronic transition occurs at 427 nm with a band gap value of 2.20 eV. Copolymer gives brown color at the fully reduced state whereas; at fully oxidized state the film has a gray-blue color. Kinetic studies were carried out at the maximum contrast wavelength upon measuring the percent transmittance, T% (7.6%) and switching time (2.0 s) to examine the switching ability of the copolymer. Dual type electrochromic device (ECD) of P(TMPMT-co-Th) and poly(3,4-ethylenedioxythiophene) (PEDOT) was constructed. Spectroelectrochemistry, switching ability, open circuit memory and stability of the device were examined by UV-Vis spectroscopy and cyclic voltammetry. The device switches between brown and blue at switching voltages of 0.0 V and 2.8 V with a short switching time of 1.4 s.     

Second-order nonlinear optical hyperbranched polymers via facile ring-opening addition reaction of azetidine-2,4-dione

A new hyperbranched polymeric structure was chosen as a nonlinear optical material. First, a difunctional chromophore, 4-(4′-nitrophenyl-diazenyl) phenyl-1,3-diamine (NDPD) was synthesized, which was then reacted with 4-isocyanato-4′(3,3-dimethyl-2,4-dioxo-azetidino)diphenylmethane (MIA) to form NDPDMIA (A₂ type monomer). The azetidin-2,4-dione functional groups exhibit selective reactivity, which can react only with primary amines under mild conditions. The hyperbranched polymers were synthesized via ring-opening addition reaction between azetidine-2,4-dione (A₂ type monomer) and primary amine (B₃ type monomer). This synthetic scheme comes with easy purification, high yield and rapid synthesis. Chemical structures of the hyperbranched polymers were characterized by FT-IR, ¹H NMR, and elemental analysis. The inherent viscosity of hyperbranched polymers in DMSO ranged from 0.15 to 0.22 dLg⁻¹. All of the obtained polymers were soluble in DMF, DMAc, and DMSO. Using in situ contact poling, r₃₃ coefficients of 6-16 pm/V and their temporal stability at 60 °C were obtained. Optical loss measurement was also achieved by a prism coupling setup.     

Comparison of pyrimethanil-imprinted beads and bulk polymer as stationary phase by non-linear chromatography

A pyrimethanil-imprinted polymer (P1) was prepared by iniferter-mediated photografting a mixture of methacrylic acid and ethylene dimethacrylate onto homemade near-monodispersed chloromethylated polydivinylbenzene beads. The chromatographic behaviour of a column packed with these imprinted beads was compared with another column packed with irregular particles obtained by grinding a bulk pyrimethanil-imprinted polymer (P2). The comparison was made using the kinetic model of non-linear chromatography, studying the elution of the template and of two related substances, cyprodinil and mepanipyrim. Extension of the region of linearity, capacity factors for the template and the related substances, column selectivity, binding site heterogeneity, apparent affinity constant (K) and lumped kinetic association (k_a) and dissociation rate constant (k_d) were studied during a large interval of solute concentration, ranging between 1 and 2000 μg/ml. From the experimental results obtained, in the linearity region of solute concentration column selectivity and binding site heterogeneity remained essentially the same for the two columns, while column capacity (at 20 μg/ml, P1 = 23.1, P2 = 11.5), K (at 20 μg/ml, P1 = 8.3 × 10⁶ M⁻¹, P2 = 2.5 × 10⁶ M⁻¹) and k_a (at 20 μg/ml, P1 = 3.5 μM⁻¹ s⁻¹, P2 = 0.47 μM⁻¹ s⁻¹) significantly increased and k_d (at 20 μg/ml, P1 = 0.42 s⁻¹, P2 = 0.67 s⁻¹) decreased for the column packed with the imprinted beads. These results are consistent with an influence of the polymerisation method on the morphology of the resulting polymer and not on the molecular recognition properties due to the molecular imprinting process.     

Hyperbranched conjugated polymers with donor-π-acceptor architecture as organic sensitizers for dye-sensitized solar cells

Three novel hyperbranched conjugated polymers (H-tpa, H-cya, and H-pca) with the same conjugated core structure and different functional terminal units were synthesized and applied in dye-sensitized solar cells (DSSCs) as photosensitizers. The photophysical, electrochemical and photovoltaic properties of the three hyperbranched conjugated polymers (HBPs) were investigated in detail. The results showed that donor-π-acceptor architecture in hyperbranched molecule benefited intramolecular charge transfer and consequently increased the generation of photocurrent. The three-dimensional (3D) steric configuration of HBPs could effectively suppress the aggregation of dyes on TiO₂ film, which is beneficial for achieving good photovoltaic performances. Among the three hyperbranched dyes, the highest power conversion efficiency (η) of 3.93% (J_sc = 8.78 mA/cm², V_oc = 0.65 V, FF = 0.688) was obtained with a DSSC based on H-pca dye upon the addition of the same mass ratio chenodeoxycholic acid (CDCA) as coadsorbent under AM 1.5 irradiation with 100 mW/cm² simulated sunlight.     

Glyphosate and glufosinate detection at electrogenerated NiAl-LDH thin films

An amperometric sensor based on Ni_1−xAl_x(OH)₂NO_3x·nH₂O layered double hydroxide (LDH) has been developed for the electrochemical analysis in one step of two herbicides: glyphosate (N-(phosphonomethyl)glycine, Glyp) and glufosinate ((DL-homoalanine-4-yl)-methylphosphinic acid, Gluf). NiAl-LDH was prepared by coprecipitation or by electrodeposition at the Pt electrode surface. Inorganic films were fully characterized by X-ray diffraction, Raman spectroscopy and scanning electron microscopy. Adsorption isotherms of Glyp onto this inorganic lamellar material have been established. Electrocatalytic oxidation of Glyp and Gluf is possible at the Ni³⁺ centres of the structure. The electrochemical responses of the NiAl-LDH modified electrode were obtained by cyclic voltammetry and chronoamperometry at 0.49 V/SCE as a function of herbicide concentration in 0.1 M NaOH solution. The electrocatalytic response showed a linear dependence on the Glyp concentration ranging between 0.01 and 0.9 mM with a detection limit of 1 μM and sensitivity 287 mA/M cm². The sensitivity found for Gluf was lower (178 mA/M cm²).     

Broad absorbing low-bandgap polythiophene derivatives incorporating separate and content-tunable benzothiadiazole and carbazole moieties for polymer solar cells

Three novel low-bandgap (LGB) conjugated polythiophenes (PThBTD_mCz_n) incorporating separate and content-tunable benzothiadiazole and carbazole moieties have been designed and synthesized for application in bulk heterojunction polymer solar cells (PSCs). The absorption spectral, thermal, electrochemical and photovoltaic properties of the random copolymers were investigated. Broad absorption from a single polymer covering the visible region from 300 to 800 nm was observed, which was ideal for highly efficient harvesting of the solar spectrum. DSC analysis showed that the polymers readily crystallized, indicating highly ordered intermolecular packing, which is beneficial for efficient charge-carrier transport. Electrochemical studies indicate desirable HOMO/LUMO levels that enable a high open-circuit voltage while blending them with fullerene derivatives as electron acceptors. Polymer solar cells using 1:1 or 1:2 wt/wt polymer: PC₆₁BM (methanofullerene [6,6-phenyl C61-butyric acid methyl ester] blends as the photoactive layers were fabricated and characterized. The preliminary investigation on the photovoltaic device of the PThBTD_mCz_n polymers gave similar power conversion efficiency of 1.1-1.2% with V_oc of 0.64-0.68 V under simulated solar light AM 1.5 G (100 mW/cm²).     

Synthesis, FTIR, solid-state NMR and SEM studies of novel polyampholytes or polyelectrolytes obtained from EGDE, MAA and imidazoles

Novel materials with either polyampholyte or polyelectrolyte character and coordination properties were obtained by reaction of methacrylic acid (MAA), imidazole (IM) or 2-methylimidazole (2MI) and ethylene glycol diglycidyl ether (EGDE) in the presence of benzoyl peroxide.This new synthetic strategy gave rise to non-soluble, compact plastics that can be milled into non-porous particles.The polymers were studied by solid-state ¹³C NMR spectroscopy, FT IR and scanning electron microscopy (SEM).The experimental values of the isoelectric point (pI) were 6.04 ± 0.02 for poly(EGDE-MAA-IM) and 6.4 ± 0.2 for poly(EGDE-MAA-2MI). The water content was low due to the high cross-linking degree.These materials behaved as ionic exchangers. Copper (Cu²⁺) was chosen as a model, the equilibrium binding was analyzed, and the coordination properties were studied by FTIR and scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDS).The maximum binding capacity for copper ion was 67 mg g⁻¹ for poly(EGDE-MAA-IM), 57 mg g⁻¹ for poly(EGDE-MAA-2MI) and 0.9 mg g⁻¹ for poly(EGDE-MAA).     

Mesoporous silica hollow sphere (MSHS) for the bioelectrochemistry of horseradish peroxidase

In this work, novel mesoporous silica hollow spheres (MSHS) were chosen as an immobilization matrix, to construct a mediator-free third-generation HRP biosensor. UV-vis spectroscopy revealed that horseradish peroxidase (HRP) entrapped in MSHS could retain its native structure. FTIR spectroscopy and nitrogen adsorption-desorption isotherms indicated that HRP are intercalated into the mesopores. The direct electron transfer of HRP entrapped in MSHS was observed. A pair of stable and well-defined redox peaks of HRP with a formal potential of about −0.150 V (vs. Ag/AgCl) in 0.1 M pH 7.0 phosphate-buffered solution (PBS) were obtained. The biosensor exhibited a fast amperometric response to H₂O₂ with a linear range of 3.9 × 10⁻⁶ to 1.4 × 10⁻⁴ M (R = 0.997, N = 20). The detection limit was 1.2 × 10⁻⁶ M based S/N = 3.     

Electrosyntheses of free-standing poly(dibenzo-18-crown-6) films in boron trifluoride diethyl etherate on stainless steel electrode

High-quality free-standing poly(dibenzo-18-crown-6) (PDBC) films with a conductivity of 4.1 × 10⁻² S cm⁻¹ and good thermal stability were synthesized electrochemically on stainless steel electrode by direct anodic oxidation of dibenzo-18-crown-6 (DBC) in pure boron trifluoride diethyl etherate (BFEE). In this medium, the oxidation potential onset of DBC was measured to be only 0.98 V vs. SCE, which was much lower than that in acetonitrile + 0.1 mol L⁻¹ Bu₄NBF₄ (1.45 V vs. SCE). PDBC films obtained from this medium showed good redox activity and stability in BFEE. The structural characterization of PDBC was performed using UV-vis, FTIR spectroscopy. The results of quantum chemistry calculations of DBC monomer and FTIR spectroscopy of PDBC films indicated that the polymerization mainly occurred at C₍₄₎ and C₍₅₎ positions). Fluorescent spectral studies indicated that PDBC was a blue light emitter. To the best of our knowledge, this is the first report on the electrodeposition of free-standing PDBC films.     

Synthesis,electrochemistry and in situ spectroelectrochemistry of a new Co(III) thio Schiff-base complex with N,N′-bis(2-aminothiophenol)-1,4-bis(carboxylidene phenoxy)butane

A new cobalt Schiff-base complex, [Co(L)(OH)(H₂O)] (where L = [N,N′-bis(2-aminothiophenol)-1,4-bis(carboxylidene phenoxy)butane), was synthesized and its electrochemical and spectroelectochemical properties were investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and thin-layer spectro-electrochemistry in solutions of dimethyl sulfoxide (DMSO) and dichloromethane (CH₂Cl₂). The [Co(L)(OH)(H₂O)] complex displays two well-defined reversible reduction processes with the corresponding anodic waves. The half-wave potentials of the first and second reduction processes were displayed at E_1/2 = 0.08 V and E_1/2 = −1.21 V (scan rate: 0.100 Vs⁻¹) in DMSO, and E_1/2 = −0.124 V and E_1/2 = −1.32 V (scan rate: 0.100 Vs⁻¹) in CH₂Cl₂. The potentials of the reduction processes in DMSO are shifted toward negative potentials (0.220–0.112 V) compared to those in CH₂Cl₂. The electrochemical results are assigned to two one-electron reduction processes; [Co(III)L] + ⁻e → [Co(II)L]⁻ and [Co(II)L]⁻ + ⁻e → [Co(I)L]²⁻. The six-coordination of the complex remains unchanged during the reduction processes and the electron transfer processes were not followed by a chemical reaction upon scan reversal. It was also seen that [Co(L)(OH)(H₂O)] was reduced at a more positive potential than the corresponding salen analogs. The shift and reversibility are apparently related to the high degree of electron delocalization of the [Co(L)(OH)(H₂O)] complex, having a N₂O₂S₂ donor set and two additional benzene units. Additionally, in situ spectroelectrochemical measurements support Co(III)/Co(II) and Co(II)/Co(I) reversible reduction processes with the observation of the corresponding spectral changes with the applied potentials E_app = −0.40 and −1.60 V. Application of the spectroelectrochemical results allowed the determination ofE_1/2 and n (the number of electrons) from the spectra of the fully oxidized and reduced species in one unified experiment as well. The results obtained by this method are in agreement with those by the CV and DPV methods.     

Spectroscopic, thermal, magnetic and structural characterization of K3VF6 prepared at room temperature

A straight forward room-temperature synthesis of V(III) containing complex fluoride K₃VF₆, using KF and vanadium(III) acetylacetonate is reported. The pale green colored powder was characterized by chemical analysis, powder X-ray diffraction; diffuse reflectance spectroscopy, infrared spectroscopy, Raman spectroscopy, differential scanning calorimetry, scanning electron microscopy, photoluminescence spectroscopy, magnetic susceptibility measurements and photoluminescence spectroscopy. The powder X-ray diffraction pattern was fitted in P2₁/n space group (monoclinic) with a = 12.106 (1) Å, b = 17.685 (0) Å, c = 11.802 (0) Å, β = 92.23° (1). Differential scanning calorimetry showed phase transitions, occurring at 158 °C and 190 °C. In the FT-IR spectrum, characteristic band for the VF₆³⁻ group was observed at 508 cm⁻¹. The bands observed in the 335-361 cm⁻¹ region and at 504 cm⁻¹ in the room temperature Raman spectrum of K₃VF₆ corresponded to the F_2g and A_1g modes, respectively. The ratio of the frequencies (F_2g/A_1g) observed in the diffuse reflectance spectrum was fitted on the Tanabe-Sugano diagram to determine the Racah parameter B value of 712 cm⁻¹. Magnetic ordering was not observed down to the lowest measured temperature of 5 K.     

Myoglobin/arylhydroxylamine film modified electrode: Direct electrochemistry and electrochemical catalysis

The adsorption processes and electrochemical behavior of 4-nitroaniline (4-NA) adsorbed onto glassy carbon electrodes (GCE) have been investigated in aqueous 0.1 M nitric acid (HNO₃) electrolyte solutions using cyclic voltammetry (CV). 4-NA adsorbs onto GCE surfaces, and upon potential cycling past −0.2 V, is transformed into the arylhydroxylamine (ArHA) derivative which exhibits a well-behaved pH dependent redox couple centered at 0.32 V at pH 1.5. It is noted as arylhydroxylamine modified glassy carbon electrodes (HAGCE). This modified electrode can be readily used as an immobilization matrix to entrap proteins and enzymes. In our studies, myoglobin (Mb) was used as a model protein for investigation. A pair of well-defined reversible redox peaks of Mb (Fe(III)-Fe(II)) was obtained at the Mb/arylhydroxylamine modified glassy carbon electrode (Mb/HAGC) by direct electron transfer between the protein and the GCE. The formal potential (E^0′), the apparent coverage (Γ^*) and the electron-transfer rate constant (k_s) were calculated as −0.317 V, 8.26 × 10⁻¹² mol/cm² and 51 ± 5 s⁻¹, respectively. Dramatically enhanced biocatalytic activity was exemplified at the Mb/HAGC electrode by the reduction of hydrogen peroxide (H₂O₂), trichloroacetic acid (TCA) and oxygen (O₂). The Mb/arylhydroxylamine film was also characterized by UV-visible spectroscopy (UV-vis), scanning electron microscope (SEM) indicating excellent stability and good biocompatibility of the protein in the arylhydroxylamine modified electrode. This new Mb/HAGC electrode exhibited rapid electrochemical response (2 s) for H₂O₂ and had good stability in physiological condition, showing the potential applicability of the films in the preparation of third generation biosensors or bioreactors based on direct electrochemistry of the proteins.     

Synthesis and electropolymerization of 5,12-dihydrothieno[3′,4′:2,3][1,4]dioxocino[6,7-b]quinoxaline and its electrochromic properties

Synthesis of a new thiophene-based monomer; 5,12-dihydrothieno[3′,4′:2,3][1,4]dioxocino[6,7-b]quinoxaline (DDQ), was realized. The chemical structure of the monomer was characterized by ¹H NMR, FTIR and mass spectroscopy techniques. Electrochemical polymerization of DDQ and characterization of the resulting polymer [P(DDQ)] was performed. Moreover, the spectroelectrochemical and electrochromic properties of the polymer film were investigated. P(DDQ) has a low oxidation potential (0.9 V) and low band gap (1.73 eV) compared to polythiophene. In addition, dual-type polymer electrochromic device (ECD) based on P(DDQ) with poly(3,4-ethylenedioxythiophene) (PEDOT) was constructed. Spectroelectrochemistry, electrochromic switching, stability and open-circuit stability of the device were studied. It was observed that polymer have good switching time, reasonable contrast and optical memory.     

Determination of solubility parameters of cross-linked macromonomeric initiators based on polypropylene glycol

A new type macromonomeric azo initiators also named macroinimers, MIMs, based on polypropylene glycol, PPG, with molecular weight 400 and 2000, were synthesized. Self-condensing radical polymerization of the macroinimers gave cross-linked polypropylene glycols. The solubility parameters of the cross-linked polymers determined using swelling experiments in a series of solvents have been reported. Crosss-linked PPG-400 and cross-linked PPG-2000 indicated the same solubility parameter value. But their swelling ratios were different because of the differences of the chain lengths in between of the cross-points (Mc) of the gels. Therefore, while the largest swelling ratio exhibited by a cross-linked PPG-2000 in tetrahydrofurane was being 19.48, this ratio was 6.84 for the cross-linked PPG-400 in the same solvent. The solubility parameters and constant α for these cross-linked polymers were obtained as δ_{cross-linked PPG-400} = 9.56 (cal cm⁻³)^1/2, α = 0.123 cm³ cal⁻¹ and δ_{cross-linked PPG-2000} = 8.95 (cal cm⁻³)^1/2, α = 0.107 cm³ cal⁻¹ by using the least squares regression method.     

Synthesis and structural studies of phosphorus carbonyl manganacycles containing the tetraphenyldiselenoimidodiphosphinato ligand

The [Mn(CO)_4−x(L){Ph₂P(Se)NP(Se)Ph₂-κ²Se}] complexes, where x = 1 for L = PPh₃ and PMePh₂, and x = 2 for L = Ph₂PCH₂CH₂PPh₂ (diphos), were synthesized by two routes. The complexes were characterized by IR, mass spectrometry (FAB+), NMR (¹H, ¹³C, ³¹P, ⁷⁷Se) spectroscopy and/or single crystal X-ray diffraction. The X-ray diffraction analysis for [Mn(CO)₃PMePh₂{Ph₂P(Se)NP(Se)Ph₂-κ²Se}] showed that the unit cell contains two independent mononuclear molecules with different MnSePNPSe rings’ conformations.     

Imprinted polymer particles for selenium uptake: synthesis, characterization and analytical applications

This work reports the preparation of molecularly imprinted polymer (MIP) particles for selective extraction and determination of selenium ions from aqueous media. Polymerization was achieved in a glass tube containing SeO₂, o-phenylenediamine, 2-vinylpyridine (VP), ethyleneglycoldimethacrylate (EDMA), 2,2′-azobisisobutyronitrile (AIBN). The polymer block obtained was ground and sieved (55-75 μm) and the Se-o-phenylenediamine complex was removed from polymer particles by leaching with 2 M of HCl, which leaves a cavity in the polymer particles. The polymer particles both prior to and after leaching have been characterized by IR and thermogravimetric (TG) studies. The effect of different parameters, such as pH, extraction time, type and least amount of eluent for elution of complex from polymer were evaluated. Extraction efficiencies >99% were obtained by elution of the polymers with 15 mL of methanol-acetonitrile mixture (1:2, v/v). The limit of detection of the proposed method followed by hydride generation atomic absorption spectroscopy (HG-AAS) was found to be 3.3 μg L⁻¹ and a dynamic linear range (DLR) of 10-200 μg L⁻¹ was obtained. The relative standard deviations (R.S.D.s) at 30.0 μg L⁻¹ of Se were below than 8.1%. The influence of various cationic interferences on percent recovery of complex was studied. The method was applied to the recovery and determination of selenium in different real samples.