Fluorous modification of 2,2′-bipyridine

A series of 2,2′-bipyridines featuring fluorinated alkyl groups [(CH₂)₃(CF₂)_xCF₃: x = 0, (1); 5, (2); 7, (3); 9 (4)] appended in the 4 and 4′ positions have been prepared. 1-4 were characterized by spectroscopy and physical methods including partition coefficient (biphase: perfluoromethylcyclohexane/toluene) and cyclic voltammetry (THF). Ab-initio calculations of vertical ionization potentials (VIPs) for 1-4 confirm the insulating role of the methylene spacers as the electrochemical reduction potentials of 1-4 are almost identical to that of 2,2′-bipyridine. Calculations for (CH₂)_nCF₃ derivatives (n = 0-10) describe a limit for impact of the CF₃ group through 9-10 methylenes. From both physical and theoretical data fluorinated alkyl groups of the formula (CH₂)₃(CF₂)_xCF₃ [x = 0-9] are inductively equivalent to a hydrogen substituent when appended to the bipyridine moiety.     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

Transition-metal complexes of phenoxy-imine ligands modified with pendant imidazolium salts: Synthesis, characterisation and testing as ethylene polymerisation catalysts

Reaction between 3-((1R,2R)-2-{[1-(3,5-di-tert-butyl-2-hydroxy-phenyl)-meth-(E)-ylidene]-amino}-cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1a) or the derivative 3-((1R,2R)-2-{[1-(2-hydroxy-5-nitro-phenyl)-meth-(E)-ylidene]-amino}-cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1b) and metal halides MCl_x.yTHF (M = Zr, x = 4, y = 2; M = V, x = y = 3; M = Cr, x = y = 3), in THF, at −78 °C gives the metal complexes of general formula [MCl_x(κ²-N,O-OC₆H₂R¹R²C(H)N-C₆H₁₀-Im)₂][Br]₂ (where M = Zr, x = 2, R¹ = R² = ^tBu, 2; M = Zr, x = 2, R¹ = H, R² = NO₂, 3; M = V, x = 1, R¹ = R² = ^tBu, 4; M = Cr, x = 1, R¹ = R² = ^tBu, 5; M = Fe, x = 0, R¹ = R² = ^tBu, 6; Im = 1-isopropyl-4-phenyl-3H-imidazol-1-ium-3-yl). ¹H and ¹³C NMR spectroscopy of 2 and 3 indicate κ²-N,O-ligand coordination via the phenoxy-imine moiety with pendant imidazolium salt that is corroborated by a single crystal structure of 6. Compounds 2, 3, 4 and 5 were tested as precatalysts for ethylene polymerisation in the presence of methylaluminoxane (MAO) cocatalyst, showing low activity. Selected polymer samples were characterised by GPC showing multimodal molecular weight distributions.     

A novel series of iridium complexes with alkenylquinoline ligands: Theoretical study on electronic structure and spectroscopic property

The ground and the lowest-lying triplet excited state geometries, electronic structures, and spectroscopic properties of a novel series of neutral iridium(III) complexes with cyclometalated alkenylquinoline ligands [(C^N)₂Ir(acac)] (acac = acetoylacetonate; C^N = 2-[(E)-2-phenyl-1-ethenyl]pyridine (pep) 1; 2-[(E)-2-phenyl-1-ethenyl]quinoline (peq) 2; 1-[(E)-2-phenyl-1-ethenyl]isoquinoline (peiq) 3; 2-[(E)-1-propenyl]pyridine (pp) 4; 2-[(E)-1-fluoro-1-ethenyl]pyridine (fpp) 5) were investigated by DFT and CIS methods. The highest occupied molecular orbital is composed of d(Ir) and π(C^N) orbital, while the lowest unoccupied molecular orbital is dominantly localized on C^N ligand. Under the TD-DFT with PCM model level, the absorption and phosphorescence in CH₂Cl₂ media were calculated based on the optimized ground and triplet excited state geometries, respectively. The calculated lowest-lying absorptions at 437 nm (1), 481 nm (2), 487 nm (3), 422 nm (4), and 389 nm (5) are attributed to a {[d_x²-y²(Ir) + d_xz(Ir) + π(C^N)] → [π∗(C^N)]} transition with metal-to-ligand/intra-ligand charge transfer (MLCT/ILCT) characters, and the calculated phosphorescence at 582 nm (1), 607 nm (2), 634 nm (3), 515 nm (4), and 491 nm (5) can be described as originating from the ³{[d_x²-y²(Ir) + d_xz(Ir) + π (C^N)] [π∗(C^N)]} excited state with the ³MLCT/³ILCT characters. The calculated results revealed that the phosphorescent color of these new Ir(III) complexes can be tuned by changing the π-conjugation effect strength of the C^N ligand.     

Enantioselective alkynylation to aldimines catalyzed by chiral 2,2′-di(2-aminoaryloxy)-1,1′-binaphthyl-copper(I) complexes

The enantioselective alkynylation of aldimines with terminal acetylenes catalyzed by chiral Cu(I) complexes with (R)-2,2′-di(2-aminoaryloxy)-1,1′-binaphthyl ligands (7) was examined. Chiral C₂-symmetric N,N-ligands 7, which have primary aniline moieties, were readily prepared from inexpensive (R)-1,1′-binaphthol (BINOL) as a chiral source. In particular, the reaction of N-benzylidenebenzeneamine 1a with phenylacetylene 2a proceeded smoothly in the presence of 5 mol % of (CuOTf)₂·C₆H₅CH₃ and 10 mol % of (R)-7d at room temperature for 24 h, and the corresponding propargylamine 3a was obtained with up to 82% ee.     

Theoretical studies on structures and spectroscopic properties of bis-cyclometalated iridium complexes [Ir(ppy)2X2]

The electronic structures and spectroscopic properties of a series of mixed bis-cyclometalated iridium(III) complexes [Ir(ppy)₂X₂]⁻ (X = CN, 1; X = NCS, 2; X = NCO, 3; ppy = 2-phenylpyridl) were investigated at the B3LYP/LANL2DZ and CIS/LANL2DZ levels. The calculated geometry parameters in the ground state are well consistent with the corresponding experimental values. The HOMO of 1 is dominantly localized on Ir atom and ppy ligand, but the HOMO of 2 and 3 have significant X ligand composition. Under the TD-DFT level with PCM model, the absorption and phosphorescence in CH₂Cl₂ media were calculated based on the optimized geometries in the ground and excited states, respectively. The lowest-lying absorption of 1 at 403 nm is attributed to {[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)]→[π^∗(ppy)]} transition with metal-to-ligand and intraligand charge transfer (MLCT/ILCT) transition characters, whereas those of 2 (449 nm) and 3 (475 nm) are related to {[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)+π(NCS/NCO)]→[π^∗(ppy)]} transition with MLCT/ILCT and ligand-to-ligand charge transfer (LLCT) transition characters. The phosphorescence of 1 at 466 nm can be described as originating from ³{[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)][π^∗(ppy)]} excited state, while those of 2 (487 nm) and 3 (516 nm) originate from ³{[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)+π(NCS/NCO)][π^∗(ppy)]} excited states. The calculated results showed that the transition character of the absorption and emission can be changed by adjusting the π electron-accepting abilities of the X ligands and the phosphorescent color can be tuned by altering the X ligands.     

4-Chloro-5-methyl-3-diphenylphosphino-1-phenyl-1,2,3,6-tetrahydrophosphinine as a bidentate P-ligand in a cis chelate Pt(II) complex

Double deoxygenation of a 3-phosphinoxido-1,2,3,6-tetrahydrophosphine oxide (2) led to bisphosphine 3-2 with an inverted ring P atom. The reaction of bidentate P-ligand 3-2 with dichlorodibenzonitrilo platinum(II) yielded the mixture of a novel cis chelate complex (7 = PtCl₂(3-2)) and a cis bis(3-diphenylphosphino-1,2,3,6-tetrahydrophosphininyl) complex (8 = PtCl₂(η¹-5)₂) containing two units of monodentate P-ligand 5.     

Titanatranes containing tetradentate ligands with controlled steric hindrance

New monomeric titanatranes (Ar = 2,6-di-i-Pr-phenyl; x = 0, 5; x = 1, 6; x = 2, 7; x = 3, 8) were synthesized from the corresponding tetradentate ligands 1-4, respectively, using an equimolar mixture of Ti(O-i-Pr)₄ and 2,6-di-i-Pr-phenol. These compounds show the catalytic activity for the ring opening polymerization of l-lactide.     

Rh-complexes of ditopic bis(pyrazol-1-yl)borate ligands: Assessment of their catalytic activity towards phenylacetylene polymerization

Two dinuclear Rh^I-cyclooctadiene complexes [1,4-(cod)Rh(B(R’)pz₂)-C₆H₄-(B(R’)pz₂)Rh(cod)], linked by a ditopic scorpionate ligand, have been prepared and fully characterized (R′ = Ph (2), C₆F₅ (2^F); pz = pyrazolide). Both compounds were tested as catalysts for phenylacetylene polymerization but showed no catalytic activity. Attempts at the synthesis of corresponding complexes of the sterically more demanding ligands (R′ = Ph (4), C₆F₅ (4^F); pz^Ph = 3-phenylpyrazolide) resulted in B-N bond cleavage and formation of the dinuclear complex [(cod)Rh(μ-pz^Ph)₂Rh(cod)] (5). Complex 5 proved to be an efficient catalyst for the preparation of highly stereoregular head-to-tail cis-transoidal poly(phenylacetylene).     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Synthesis of sulfur containing analogues of the soluble guanylate cyclase inhibitor 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazin-1-one NS2028

Sulfur analogues of the soluble guanylate cyclase (sGC) inhibitor NS2028 1a are synthesized. Treating 8-bromo-2H-benzo[b][1,4]oxazin-3(4H)-one oxime (6) with 1,1′-thiocarbonyldiimidazole (1.1 equiv) gave the carbamothioate 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazine-1-thione (3a) in 83% yield. Alternatively reacting NS2028 1a with P₂S₅ (0.5 equiv) affords the carbamothioate 3a in 80% yield. Similar treatment of 8-aryl substituted NS2028 analogues 1b-d with P₂S₅ gave the carbamothioates 3b-d in 64-91% yields. Although quite stable, the carbamothioates 3a-d could be thermally isomerized in the presence of Cu (10 mol %) to afford the thiocarbamates 4a-d in high yields. Interestingly, in the case of carbamothioate 3a Pd and In metals also facilitated the isomerization. Furthermore, treatment of the thiocarbamates 4a-d with P₂S₅ (0.5 equiv) affords the carbamodithioates 5a-d in 72-89% yields. All new compounds are fully characterized including single crystal X-ray data for carbamothioate 3a and thiocarbamate 4a. Finally, a mechanism is proposed for the carbamothioate to thiocarbamate isomerization.     

A highly stereoselective preparation of CF3-substituted 1-aryl-1,2-diphenylethenes: application to the synthesis of panomifene

β-CF₃-α,β-diphenylvinyl sulfide 3a was prepared stereoselectively in 77% yield from the reaction of 2 with phenyllithium at room temperature for 5 h. Oxidation of 3a with MCPBA afforded the corresponding vinyl sulfone 4a, in which (E)-4a can be crystallized in a mixture of CH₂Cl₂ and hexane. The addition-elimination reaction of (E)-4a with phenyllithium having substituents on the benzene ring provided 5a-j in 51-82% yields stereospecifically. Similarly, the treatment of (E)-4a with p-chloroethoxyphenyllithium in the presence of 12-crown-4 (20 mol %) at −10 °C, followed by slowly warming to room temperature, resulted in the formation of the corresponding panomifene precursor 6 in 82% yield.     

Cytotoxic half-sandwich rhodium(III) complexes: Polypyridyl ligand influence on their DNA binding properties and cellular uptake

The DNA binding of polypyridyl (pp) (η⁵-C₅Me₅)Rh^III complexes of the types [(η⁵-C₅Me₅)RhCl(pp)](CF₃SO₃) (2-6) (pp = bpy, phen, dpq, dppz, dppn), [(η⁵-C₅Me₅)Rh{(Me₂N)₂CS}(pp)](CF₃SO₃)₂ (7-9) (pp = dpq, dppz, dppn) and [(η⁵-C₅Me₅)Rh(L)(pp)](CF₃SO₃) (10) (L = C₆H₅S⁻) and (11) (L = C₁₀H₇S⁻) has been studied by UV/Vis spectroscopy, circular dichroismus and viscosity measurements. Complexes 3-11 are cytotoxic towards the human MCF-7 breast and HT-29 colon cancer cell lines and exhibit IC₅₀ values in the range 0.56-10.7 μM. Stable intercalative binding into CT-DNA is indicated for the dpq and dppz complexes by large increases ΔT_m of 6-12 °C in the DNA thermal denaturation temperature for r = [complex]/[DNA] = 0.1 and by induced CD bands and large viscosity increases. In contrast, significant DNA lengthening is not observed after incubation of the biopolymer with the dppn complexes 2 and 9 at molar ratios of r < 0.08. Pronounced hypochromic shifts for the π-π^∗ transitions of the dppn ligands in the range 320-425 nm indicate the possible presence of surface stacking. The in vitro cytotoxicities of the chloro complexes 4-6 and the (Me₂N)₂CS complexes 7-9 are dependent on the size of the polypyridyl ligand with IC₅₀ values decreasing in the order dpq > dppz > dppn. For instance, IC₅₀ values of 5.3, 1.5 and 0.91 μM were determined for 7-9 against MCF-7 cells. Rapid Cl⁻/H₂O exchange leads the formation of aqua dications for 4-6, whose levels of cellular uptake and cytotoxicities are similar to those established for 7-9. Intramolecular interactions between the aromatic thiolate and dppz ligands of 10 and 11 prevent significant DNA intercalation. X-ray structural determinations have been performed for 2-7 and 11.     

Oxovanadium(IV) complexes as molecular catalysts in epoxidation: Simple access to pyridylalkoxide derivatives

Reaction of bis(aryl)-2-pyridylmethanol ligands (1a-7a) with VO(SO₄) · 5H₂O results in the formation of metal-oxo complexes [VO(N-O)₂] (1-7), with N-O = bis(aryl)-2-pyridylmethanol. A molecular structure of (4) has been determined by single crystals X-ray diffraction study, which showed the expected square planar pyramidal geometry with the pyridine ring nitrogens in trans-position to each other. The metal-oxo complexes (1-4,6,7) demonstrated the ability to catalyse epoxidation reactions of alkenes with molecular oxygen.     

Synthesis of arene ruthenium triazolato complexes by cycloaddition of the corresponding arene ruthenium azido complexes with activated alkynes or with fumaronitrile

The neutral arene ruthenium azido complexes [(η⁶-p-cymene)Ru(LL)(N₃)], [LL = acetylacetonato (acac) (4), benzoylacetonato (bzac) (5) diphenylbenzoyl methane (dbzm) (6)] undergo [3+2] cycloaddition reaction with a series of activated alkynes and fumaronitrile to produce the arene ruthenium triazolato complexes: [(η⁶-p-cymene)Ru(LL){N₃C₂(CO₂R)₂}] [LL = (acac), R = Me (7); LL = (bzac), R = Me (8); LL = (dbzm), R = Me (9); LL = (acac), R = Et (10); LL = (bzac), R = Et (11); LL = (dbzm), R = Et (12) and [(η⁶-p-cymene)Ru(LL)(N₃C₂HCN)]; LL = acac (13), bzac (14); dbzm (15). However, cationic azido complexes, [(η⁶-p-cymene)Ru(dppe)(N₃)]⁺ and [(η⁶-p-cymene)Ru(dppm)(N₃)]⁺ do not undergo such cycloaddition reactions. The complexes were characterized on the basis of microanalyses, FT-IR and NMR spectroscopic data. Crystal structures of representative complexes were determined by single crystal X-ray diffraction.     

Aluminum and zinc complexes supported by functionalized phenolate ligands: Synthesis, characterization and catalysis in the ring-opening polymerization of ε-caprolactone and rac-lactide

A series of aluminum and zinc complexes supported by functionalized phenolate ligands were synthesized and characterized. Reaction of 2-(3,5-R₂C₃N₂)C₆H₄NH₂ (R = Me, Ph) with salicylaldehyde or 3,5-di-tert-butylsalicylaldehyde afforded 2-((2-(1H-pyrazol-1-yl)phenylimino)methyl)phenol derivatives 2a-2d. Treatment of 2a-2d with an equiv. of AlR²₃ (R² = Me, Et) gave corresponding aluminum aryloxides 3a-3e, while reaction with an equiv. of ZnEt₂ afforded zinc aryloxides 4a-4d. Treatment of 2c with 0.5 equiv. of ZnEt₂ formed diphenolato zinc complex 5. All new compounds were characterized by ¹H and ¹³C NMR spectroscopy and elemental analyses. The structures of complexes 3a, 4a and 5 were further characterized by single crystal X-ray diffraction techniques. The catalytic activity of complexes 3-5 toward the ring-opening polymerization of ε-caprolactone was studied. The zinc complexes (4a-4d) exhibited higher catalytic activity than the aluminum complexes (3a-3e). The diphenolato zinc complex 5 showed lower catalytic activity than the ethylzinc complexes 4a-4d. The aluminum complex (3b) is inactive to initiate the ROP of rac-lactide, while the zinc complex (4d) is active initiator for the ROP of rac-lactide, giving atactic polylactide.     

Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.     

Synthesis and molecular structures of dinuclear complexes with 1,2-dihydro-1,2-diphenyl-naphtho[1,8-c,d]1,2-diphosphole as a bridging ligand

A bisphosphine in which a PhP-PPh bond bridges 1,8-positions of naphthalene, 1,2-dihydro-1,2-diphenyl-naphtho[1,8-cd]-1,2-diphosphole (1), was used as a bridging ligand for the preparation of dinuclear group 6 metal complexes. Free trans-1, a more stable isomer having two phenyl groups on phosphorus centers mutually trans with respect to a naphthalene plane, was allowed to react with two equivalents of M(CO)₅(thf) (M = W, Mo, Cr) at room temperature to give dinuclear complexes (OC)₅M(μ-trans-1)M(CO)₅ (M = W (2a), Mo (2b), Cr (2c)). The preparation of the corresponding dinuclear complexes bridged by the cis isomer of 1 was also carried out starting from the free trans-1 in the following way. Mono-nuclear complexes M(trans-1)(CO)₅ (M = W (3a), Mo (3b), Cr (3c)) which had been prepared by a reaction of trans-1 with one equivalent of the corresponding M(CO)₅(thf) (M = W, Mo, Cr) complex, were heated in toluene, wherein a part of the trans-3a-c was converted to their respective cis isomer M(cis-1)(CO)₅. Each cis trans mixture of the mono-nuclear complexes 3a-c was treated with the corresponding M(CO)₅(thf) to give a cis trans mixture of the respective dinuclear complexes 2a-c. The cis isomer of the ditungsten complex 2a was isolated, and its molecular structure was confirmed by X-ray analysis, showing a shorter W?W distance of 5.1661(3) Å than that of 5.8317(2) Å in trans-2a.     

Mono and dinuclear half-sandwich platinum group metal complexes bearing pyrazolyl-pyrimidine ligands: Syntheses and structural studies

Reactions of 0.5 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = η⁶-C₆H₆, η⁶-p-ⁱPrC₆H₄Me) and [(Cp∗)M(μ-Cl)Cl]₂ (M = Rh, Ir; Cp∗ = η⁵-C₅Me₅) with 4,6-disubstituted pyrazolyl-pyrimidine ligands (L) viz. 4,6-bis(pyrazolyl)pyrimidine (L1), 4,6-bis(3-methyl-pyrazolyl)pyrimidine (L2), 4,6-bis(3,5-dimethyl-pyrazolyl)pyrimidine (L3) lead to the formation of the cationic mononuclear complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ (L = L1, 1; L2, 2; L3, 3), [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ (L = L1, 4; L2, 5; L3, 6), [(Cp∗)Rh(L)Cl]⁺ (L = L1, 7; L2, 8; L3, 9) and [(Cp∗)Ir(L)Cl]⁺ (L = L1, 10; L2, 11; L3, 12), while reactions with 1.0 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ and [(Cp∗)M(μ-Cl)Cl]₂ give rise to the dicationic dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (L = L1, 13; L2, 14; L3, 15), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (L = L1, 16; L2, 17; L3, 18), [{(Cp∗)RhCl}₂(L)]²⁺ (L = L1, 19; L2, 20; L3, 21) and [{(Cp∗)IrCl}₂(L)]²⁺ (L = L1 22; L2, 23; L3 24). The molecular structures of [3]PF₆, [6]PF₆, [7]PF₆ and [18](PF₆)₂ have been established by single crystal X-ray structure analysis.     

Synthesis, photophysical properties, and theoretical studies on pyrrole-containing bromo Re(I) complex

Two bromo rhenium(I) carbonyl complexes with the formula of [Re(CO)₃(L)Br], where L = 1,10-phenanthroline (Phen-Re) and 5-(1H-pyrrol-1-yl)-1,10-phenanthroline (Pyph-Re), were successfully synthesized with the aim to analyze the effect of the pyrrole (Py) moiety on the photophysical properties of Pyph-Re. It was found that the triplet metal-to-ligand charge-transfer dπ (Re) → π*(N-N) emission of Phen-Re and Pyph-Re centered at ca. 527 nm with the luminescence quantum yield (LQY) of 0.015 and ca. 578 nm with the LQY of 0.011, respectively. At the same time, the geometrical structures of the ground state and the absorption spectral properties of Phen-Re and Pyph-Re were also calculated with the 6-31G* basis set employed on C, H, N, O, and Br atoms, and LANL2DZ adopted on Re atom. According to the experimental and theoretical analysis, the red-shift of the photoluminescent spectrum and the lower LQY of Pyph-Re should be mainly attributed to the narrower energy gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital and the more LLCT transition ration of Pyph-Re, respectively.