Dispersion polymerization of styrene in supercritical carbon dioxide using monofunctional perfluoropolyether and silicone-containing fluoroacrylate stabilizers

The free radical dispersion polymerization of styrene was carried out in supercritical carbon dioxide (scCO₂) using two different stabilizers. The polymerizations are performed in the presence of poly(heptadecafluorodecyl acrylate-co-tris(trimethylsilyloxy)silyllpropyl methacrylate) p(HDFDA-co-SiMA) and a commercially available carboxylic acid-terminated perfluoropolyether (Krytox^® 157FSL) as polymerization stabilizers. Dry, fine powdered spherical polystyrene particles were produced under optimised conditions. The resulting high yield of spherical and relatively uniform micron-size polystyrene particles were formed utilizing various amounts of p(HDFDA-co-SiMA) random copolymer. However, it was observed that Krytox^® 157FSL was not a good stabilizer as p(HDFDA-co-SiMA) for the dispersion polymerization of styrene. The particle diameter was shown to be dependent on the type of the stabilizer and the weight percent of the stabilizer added to the system. The effect of varying the concentrations of stabilizers and initiator, reaction time and reaction pressure upon the polymerization yield, molar mass and morphology of polystyrene have been investigated.     

Synthesis of monodispersed poly(acrylonitrile) microspheres by dispersion polymerization in compressed liquid dimethyl ether

In this study, monodispersed spherical particles of poly(acrylonitrile) were synthesized via dispersion polymerization in compressed liquid dimethyl ether using 2,2′-azobisisobutyronitrile (AIBN) as an initiator and five kinds of surfactants: PDMS-g-pyrrolidonecarboxylic acid (Monasil PCA™), PDMS modified surfactants, SS-5050K™, KF-6017™, poly(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10- heptadecafluorodecyl acrylate), and poly(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl methacrylate). Using Monasil PCA as a surfactant, uniform and spherical polymer particles were generated. The size of the microsphere particles was reduced via an increase in the concentration of Monasil PCA and a reduction in the monomer concentration. Increases in the concentration of AIBN resulted in a broad distribution of microspheres. Reaction temperature and pressure did not exert significant effects on the size and size distribution of the polymer particles.     

Dispersion polymerization of 2‐hydroxyethyl methacrylate in supercritical carbon dioxide

Herein we report a successful dispersion polymerization of 2‐hydroxyethyl methacrylate (HEMA) in a carbon dioxide continuous phase with a block copolymer consisting of polystyrene and poly(1,1‐dihydroperfluorooctyl acrylate) as a stabilizer. Poly(2‐hydroxyethyl methacrylate) was effectively emulsified in carbon dioxide with the amphiphilic diblock copolymer surfactant, and the successful stabilization of the polymerization simultaneously gave spherical particles in the submicrometer range with relatively narrow particle size distributions. The initial concentrations of HEMA and the stabilizer and the pressure had substantial effects on the size of the colloidal particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3783–3790, 2000     

Redox polymerization of 2-hydroxyethyl methacrylate (HEMA). I. Influence of surfactants on polymerization kinetics

Oxidation of ferrous orthophenanthroline (FeP) by peroxydiphosphate (PP) in aqueous medium at pH 1 was followed spectrophotometrically. Kinetic analysis has shown that oxidation occurs via the formation of an intermediate complex between FeP and PP. Equi-librium and rate constants were calculated. Influence of surfactants on the oxidation of FeP by PP was also Investigated. The equilibrium constant for complex formation was found to be higher in the presence of surfactants. The enhanced complex formation has been attributed to the ionic interactions between the charged surfactant and the ionic species in the reaction medium. Polymerization of HEMA initiated by the redox system,FeP/PP, was carried out in aqueous medium, under the conditions of excess reductant over oxidant and excess oxidant over reductant. The polymerization followed different mech-anisms under these conditions; with excess oxidant, the growing polymer radicals underwent oxidative termination, while with excess reductant, primary radical termination was pre-ferred. The effect of surfactants on the aqueous polymerization of HEMA using the redox system FeP/PP was also investigated. In addition to the decrease in rate, the polymerization followed a different mechanism in the presence of surfactants, the growing radicals ter-minated by mutual interaction. © 1995 John Wiley & Sons, Inc.     

Significant rate acceleration in carbonate synthesis from carbon dioxide and oxiranes using dimethyl carbonate as a recyclable medium

The synthesis of cyclic carbonates by the reaction of oxiranes and carbon dioxide in the presence of catalytic amount of tetrabutylammonium bromide in dimethylcarbonate without any metal catalyst is reported. Significant rate acceleration in the reaction is observed in dimethylcarbonate as compared to the other solvents. Under the reaction conditions of 100 °C and 2.1 MPa in dimethyl carbonate, maximum conversion and selectivity is achieved. The dimethylcarbonate containing tetrabutylammonium bromide catalyst can be easily recovered and reused for at least six recycles with the same selectivity.     

Precipitation polymerization of 2‐hydroxyethyl methacrylate in supercritical carbon dioxide

We report the successful precipitation polymerization of 2‐hydroxyethyl methacrylate (HEMA) in supercritical carbon dioxide (scCO₂) at pressures ranging from 15 to 27 MPa utilizing 2, 2′‐azobisisobutyronitrile (AIBN) as a free radical initiator. The effects of the reaction pressure, initiator concentration, monomer concentration, reaction temperature, and reaction time were investigated. Analyses by scanning electron microscopy (SEM) indicated that in all reaction conditions, polymerization in the absence of stabilizer led to the formation of large aggregates of partially coalesced particles, with diameters of approximate 1–10 µm. Analyses by gel permeation chromatography (GPC) indicated that for the reaction pressure, initiator concentration, monomer concentration, reaction temperature, and reaction time studied there are appreciable effect on product molecular weight. Copyright © 2011 John Wiley & Sons, Ltd.     

Characterisation of microcellular foams produced from semi-crystalline PCL using supercritical carbon dioxide

Microcellular foams were produced from polycaprolactone (PCL) using a method based on the rapid release of supercritical CO₂. The average pore size in the structure was found to vary with the selected vent time and the final microstructure was a combination of open and closed cells. Thermal analysis showed that the degree of crystallinity of all foams was in the region of 70%. This was found to be consistent with the observation of lamellar textures on the inner surface of the pores. There was also a pronounced decrease in compressive modulus with increasing vent time and average pore size.     

The conformational stability of tactic poly(2-hydroxyethyl methacrylate) in aqueous salt solutions

The conformational stability of tactic poly(2-hydroxyethyl methacrylate) (PHEMA) in aqueous salt solutions was investigated by measurements of swelling, surface-free energy, and differential scanning calorimetry, as this polymer in water is sensitive in various electrolytes. In the case of inorganic salts, the major role for the salt effect is played by the anions, and the exposure of hydrophobic components at the PHEMA surface can be correlated with the increase of the degree of swelling. The influence of cations is considerably weaker. In the case of organic salts, tetraalkylammonium halides cause the chain extension more effectively with the increase of alkyl chain length in the cations. This result indicates that the breakdown of the hydrophobic parts in PHEMA provides an important clue on conformational stability. The amount of water molecules bound with the hydrophilic sites of tactic-PHEMA mainly depends on the chain extension and the hydration of cations. Since the sites in tactic-PHEMA influenced by the cation and the anion are different, their effects cause the conformational transition at a specific range of salt concentration. © 1993 John Wiley & Sons, Inc.     

Synthesis of polylactide/clay nanocomposites by in situ intercalative polymerization in supercritical carbon dioxide

Polylactide (PLA)/clay nanocomposites have been prepared by in situ ring-opening polymerization in supercritical carbon dioxide. Depending on the type of organoclay used, polylactide chains can be grafted onto the clay surface, leading to an exfoliated morphology. Nanocomposites with high clay contents (30-50 wt.%), called masterbatches, have also been successfully prepared and were recovered as fine powders thanks to the unique properties of the supercritical fluid. Dilution of these masterbatches into commercial l-polylactide by melt blending has led to essentially exfoliated nanocomposites containing 3 wt.% of clay. The mechanical properties of these materials have been assessed by flexion and impact tests. Significant improvements of stiffness and toughness have been observed for the PLA/clay nanocomposites compared to the pure matrix, together with improved impact resistance.     

Degradation of Poly(2-hydroxyethyl methacrylate) Obtained by Radiation in Aqueous Solution

The degradation of poly(hydroxyethyl methacrylate), PHEMA obtained by γ -radiation induced polymerization of HEMA in aqueous solution, was studied. The polymer was a gel type and insoluble in common organic solvents. The DSC thermogram of the polymer gave a Tg value at 88.2°C and an endothermic peak showed further polymerization or crosslinking at 110–160°C. The degradation observed in TGA was a depolymerization type. However, the FT-IR of TGA fragments showed no monomer, which was degraded further. The degradation of monomer was studied by the GC-MS method. Similar results were also observed.     

Equilibrium solubility of carbon dioxide in 2(methylamino)ethanol

In this paper the equilibrium solubility of carbon dioxide in 1.0 M, 2.0 M and 4.0 M 2(methylamino)ethanol (MAE) is measured at 303, 313 and 333 K, and at CO₂ partial pressures ranging from 1 to 100 kPa using stirred cell reactor. The Kent-Eisenberg model was used to predict the solubility of carbon dioxide in MAE solutions. The equilibrium constant representing hydrolysis of carbamate ion is correlated with temperature, CO₂ partial pressure and amine concentration by non-linear regression, using experimental results of carbamate ion concentrations. The model predicted results showed good agreement with the experimental solubility results. The solubility profile of CO₂ in MAE showed better performance when compared with other commercial amines.     

Synthesis of cross-linked poly(methyl methacrylate) via dispersion polymerization in supercritical carbon dioxide

Cross-linked poly(methyl methacrylate) particles were prepared via dispersion polymerization in supercritical carbon dioxide (scCO₂) using poly(heptadecafluorodecyl methacrylate) (PHDFDMA) and 2,2′-azobisisobutyronitrile as the dispersant and the initiator, respectively. The following chemicals were used as cross-linking agents: ethylene glycol dimethacrylate (EGDMA), 1,4-buthanediol di(meth)acrylate (1,4-BD(M)A), and trimethylolpropane trimethacrylate. PHDFDMA was synthesized by solution polymerization in scCO₂. We investigated the effect of the chemical structure, concentration of the cross-linking agents, reaction pressure, and CO₂ density on the morphology, the polydispersity, and the cross-linking density of polymer particles. The resulting polymer particle was characterized by field emission SEM, differential scanning calorimetry, and thermal gravimetric analysis. The cross-linked PMMA particles is more agglomerate as the cross-linking agent concentration increased and as pressure decreased at constant temperature. Glass-transition temperature (T _g) of the resulting polymer increased as the cross-linking agent increased with temperature and pressure increasing at the same CO₂ density. Decomposition temperature is slightly increased as 1,4-BDA concentration increased. From these results, we can confirm that the thermal stability of the polymer increased as the cross-linking agent and EGDMA is the best cross-linking agent in term of the thermal stability.     

Dispersion polymerization of styrene in carbon dioxide stabilized by copolymers of poly(propylene glycol) methacrylate and 2‐(perfluorooctyl)ethyl methacrylate

The dispersion polymerization of styrene in carbon dioxide with a series of copolymers of poly(propylene glycol) methacrylate (PPGMA) and 2‐(perfluorooctyl)ethyl methacrylate (FOEMA) as the polymerization dispersants was examined. It was demonstrated that PPGMA and FOEMA copolymers and polymers containing 52–100% FOEMA could be used as effective dispersants for the polymerization, and the composition of the copolymeric dispersant had a dramatic effect on both the polymerization yield and the morphology of the resulting polystyrene. The effects of the concentrations of the copolymeric dispersants, the concentrations of the monomer, and the reaction pressure were also investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3804–3815, 2003     

SO42-改性后的TiO2(锐钛和/或金红石)表面上MoO3的分散性质研究

采用红外(IR)、拉曼(Raman)、X-射线衍射(XRD)、程序升温还原(TPR)等方法考察了经硫酸根改性后的金红石(SR)与锐钛矿(SA)的混合比例变化时的负载型催化剂，MoO₃ / TiO₂(SR+SA)，的一些物理化学性质(如活性组分MoO₃的分散行为、表面酸碱性、氧化还原性)的变化规律。结果表明：对于MoO₃ / TiO₂(SR+SA)样品，低含量MoO₃表面分散时倾向于优先与混合载体中的改性金红石(SR)发生作用；TiO₂载体表面SO₄^2-的存在，使得载体表面产生了新的酸性位，导致样品中表面分散的钼物种主要以聚合八面体状态存在。     

Adsorption separation of carbon dioxide,methane, and nitrogen on Hβ and Na-exchanged β-zeolite

Adsorption isotherms of carbon dioxide （CO2）, methane （CH4）, and nitrogen （N2） on Hβand sodium exchanged β-zeolite （Naβ） were volumetrically measured at 273 and 303 K. The results show that all isotherms were of Brunauer type I and well correlated with Langmuir-Freundlich model. After sodium ions exchange, the adsorption amounts of three adsorbates increased, while the increase magnitude of CO2 adsorption capacity was much higher than that of CH4 and N2. The selectivities of CO2 over CH4 and CO2 over N2 enhanced after sodium exchange. Also, the initial heat of adsorption data implied a stronger interaction of CO2 molecules with Na＋ ions in Naβ . These results can be attributed to the larger electrostatic interaction of CO2 with extraframework cations in zeolites. However, Naβ showed a decrease in the selectivity of CH4 over N2, which can be ascribed to the moderate affinity of N2 with Naβ. The variation of isosteric heats of adsorption as a function of loading indicates that the adsorption of CO2 in Naβ presents an energetically heterogeneous profile. On the contrary, the adsorption of CH4 was found to be essentially homogeneous, which suggests the dispersion interaction between CH4 and lattice oxygen atoms, and such interaction does not depend on the exchangeable cations of zeolite.     

Adsorption separation of carbon dioxide, methane and nitrogen on monoethanol amine modified B-zeolite

A new type of composite adsorbents was synthesized by incorporating monoethanol amine (MEA) into β-zeolite. The parent and MEA-functionalized β-zeolites were characterized by X-ray diffraction (XRD), N₂ adsorption, and thermogravimetric analysis (TGA). The adsorption behavior of carbon dioxide (CO₂), methane (CH₄), and nitrogen (N₂) on these adsorbents was investigated at 303 K. The results show that the structure of zeolite was well preserved after MEA modification. In comparison with CH₄ and N₂, CO₂ was preferentially adsorbed on the adsorbents investigated. The introduction of MEA significantly improved the selectivity of both CO₂/CH₄ and CO₂/N₂, the optimal selectivity of CO₂/CH₄ can reach 7.70 on 40 wt% of MEA-functionalized β-zeolite (MEA(40)-β) at 1 atm. It is worth noticing that a very high selectivity of CO₂/N₂ of 25.67 was obtained on MEA(40)-β. Steric effect and chemical adsorbate-adsorbent interaction were responsible for such high adsorption selectivity of CO₂. The present MEA-functionalized β-zeolite adsorbents may be a good candidate for applications in flue gas separation, as well as natural gas and landfill gas purifications.     

XPS analysis (ESCA) of the surface composition of poly(styrene/2-hydroxyethyl methacrylate) microspheres produced by emulsifier-free emulsion polymerization

Polymer microspheres composed of various compositions of styrene and 2-hydroxyethyl methacrylate (HEMA) were produced by batch emulsifier-free emulsion polymerization. The HEMA content at the surface, [HEMA] _s , of the microspheres powdered by freeze-drying was determined by both quantitativeC ^1s /O ^1s analysis andC ^1s peak shape analysis of the x-ray photoelectron spectroscopic spectra. When the HEMA content in the microsphere, [HEMA] _p , was less than about 5 mole%, the [HEMA] _s values determined by the two different methods showed good agreement. At [HEMA]_p above 5 mole %, [HEMA]_s values determined by the first method were about 15 mole % greater than those determined by the second. They both showed a similar tendency with the [HEMA] _s being higher than the [HEMA] _p , e.g., when [HEMA] _p was 1 mole %, [HEMA] _s was 11 mole %. The intensity of the satellite peak due to the ^* transition of the benzene ring of the styrene component decreased with an increase in [HEMA] _p , to zero at 5 mole % of [HEMA] _p . These results indicate that the HEMA component is localized at the surface.Part CVIII of the series Studies on Suspension and Emulsion.     

Preparation of micron-size monodisperse poly(2-hydroxyethyl methacrylate) particles by dispersion polymerization

Dispersion polymerization of 2-hydroxyethyl methacrylate using four categories of polymeric stabilizers in a mixture of good and poor solvents was performed to produce polymeric particles. The stabilizers employed were methyl methacrylate and styrene homopolymers, methacryloyl-terminated poly(methyl methacrylate) and polystyrene macromonomers, an amphiphilic poly(methyl methacrylate-co-methacrylic acid-graft-styrene), and polybutadiene derivatives containing reactive vinyl groups. Dispersion copolymerization with a small amount of the macromonomer gave micron-size particles with relatively narrow size distribution. The amphiphilic graft copolymer and the polybutadiene derivatives also afforded monodisperse particles. The mixed ratio between good and poor solvents greatly affected the particle size and size distribution. © 1996 John Wiley & Sons, Inc.     

In situ radical polymerization of methyl methacrylate in a solution of surface modified TiO2 and nanoparticles

Surface modified TiO₂ nanoparticles dissolved in toluene were encapsulated in PMMA by in situ radical polymerization of methyl methacrylate initiated by 2,2′-azobisisobutyronitrile. The surface modification of the TiO₂ nanoparticles (average diameter of 4.5 nm) was achieved by the formation of a charge transfer complex between TiO₂ nanoparticles and 6-palmitate ascorbic acid. The surface modified TiO₂/nanoparticles were characterized using UV−Vis and FTIR spectroscopy, while the obtained polymer nanocomposites were characterized using reflection and ¹H NMR spectroscopy, as well as gel permeation chromatography. The influence of the TiO₂ nanoparticles on the thermal properties of the PMMA matrix was investigated using thermo-gravimetric analysis and differential scanning calorimetry. The glass transition temperature of the polymer was not influenced by the presence of the nanoparticles while the thermal stability was significantly improved.