Thermal stability and high glass transition temperature of 4-chloromethyl styrene polymers bearing carbazolyl moieties

A new styrene derivative monomer, 4-(N-carbazolyl)methyl styrene (CzMS), was synthesized by reacting 4-chloromethyl styrene with carbazole in the presence of sodium hydride. Then, CzMS was homopolymerized and copolymerized with different monomers such as methyl methacrylate (MMA), ethyl methacrylate (EMA), methyl acrylate (MA), ethyl acrylate (EA) and n-butyl acrylate (BA) by free radical polymerization method in N,N-di-methylformamide (DMF) solution at 70 ± 1 °C using azobisisobutyronitrile initiator to give the copolymers I-V in good yields. The structure of all the resulted polymers was characterized and confirmed by FT-IR, ¹H NMR and ¹³C NMR spectroscopic techniques. The average molecular weight and glass transition temperature of polymers were determined using gel permeation chromatograph (GPC) and differential scanning calorimeter (DSC) instruments, respectively. It was found that these polymers with carbazole moieties have high thermal stability and the presence of bulk carbazole groups in polymer side chains leads to an increase in the rigidity and glass transition temperature of polymers.     

Electrospinning preparation and drug delivery properties of Eu/Tb doped mesoporous bioactive glass nanofibers

Luminescent Eu³⁺/Tb³⁺ doped mesoporous bioactive glass nanofibers (MBGNFs) with average diameter of 100-120 nm were fabricated by electrospinning method. Pluronic P123 and N-cetyltrimethylammonium bromide (CTAB) were used as co-surfactants to generate porous structure of the nanofibers. N₂ adsorption-desorption measurement reveals that the MBGNF:Eu³⁺ have a surface area of 188 m² g⁻¹, a pore volume of 0.246 cm³ g⁻¹ and average pore size of 4.17 nm, and the MBGNF:Tb³⁺ have a surface area of 171 m² g⁻¹, a pore volume of 0.186 cm³ g⁻¹ and average pore size of 3.65 nm. Photoluminescence measurements reveal that the MBGNF:Eu³⁺ show strong red emission dominated by the ⁵D₀ → ⁷F₂ transition of Eu³⁺ at 614 nm with a lifetime of 1.356 ms, and MBGNF:Tb³⁺ show strong green emission dominated by the ⁵D₄ → ⁷F₅ transition of Tb³⁺ at 544 nm with a lifetime of 1.982 ms. The biocompatibility tests on L929 fibroblast cells using MTT assay reveal low cytotoxicity of MBGNF. These luminescent nanofibers show sustained release properties for ibuprofen (IBU) in vitro. The emission intensities of Eu³⁺ in the drug delivery system vary with the released amount of IBU, thus making the drug release be easily tracked and monitored by the change of the luminescence intensity.     

Rate coefficient for the H atom reaction with acrylate monomers in aqueous solution

The rate coefficients of H atom addition to 20 acrylate type monomers were measured in dilute aqueous solutions by pulse radiolysis technique. All the measured values were in a relatively narrow range (2×10⁹-1×10¹⁰ mol⁻¹ dm³ s⁻¹). The rate coefficients changed in the following order: crotonates≈maleates<fumarates<acrylic acid esters≈acrylamides<methacrylic acid esters. Some correlation between the H and OH addition rate coefficients was found.     

Application of enzymatic probe sonication extraction for the determination of selected veterinary antibiotics and their main metabolites in fish and mussel samples

A new method based on enzymatic probe sonication extraction prior to high-performance liquid chromatography (HPLC) has been developed for the determination of 11 antibiotics (drugs) and the main metabolites of five of them in fish tissue and mussel samples. The analytes belong to four different classes of antibiotics (sulfonamides, tetracyclines, penicillins and amphenicols). The analysed compounds were sulfadiazine (SDI) and N⁴-acetylsulfadiazine (NDI) metabolite, sulfamethazine (SMZ) and N⁴-acetylsulfamethazine (NMZ), sulfamerazine (SMR) and N⁴-acetylsulfamerazine (NMR), sulfamethoxazole (SMX), trimetroprim (TMP), amoxicillin (AMX) and its main metabolite amoxicilloic acid (AMA), ampicillin (AMP) and its main metabolite ampicilloic acid (APA), chloramphenicol (CLF), thiamphenicol (TIF), oxytetracycline (OXT) and chlortetracycline (CLT).The main factors affecting the extraction efficiency (type of enzyme, type and volume of extractant, ultrasounds power and extraction time) were optimised in tissue of hake (Merluccius merluccius), anchovy (Engraulis encrasicolus), mussel (Mytilus sp.) and wedge sole (Solea solea). The extraction was carried out using an extraction time of 5 min with 5 mL of water and subsequent clean-up with dichloromethane.High-performance liquid chromatography (HPLC) with diode array (DAD) and fluorescence (FLD) detectors was used for the determination of the antibiotics. The separation of the analysed compounds was conducted by means of a Phenomenex^® Gemini C₁₈ (150 mm × 4.6 mm I.D., particle size 5 μm) analytical column with LiChroCART^® LiChrospher^® C₁₈ (4 mm × 4 mm, particle size 5 μm) guard-column. Analysed drugs were determined using formic acid 0.1% (v/v) in water and acetonitrile in gradient elution mode as mobile phase. The proposed method was also evaluated by a laboratory assay consisting of the determination of the targeted analytes in samples of Cyprinus carpio which had previously administered the antibiotics.     

The rheology of Torlon solutions and its role in the formation of ultra-thin defect-free Torlon hollow fiber membranes for gas separation

Fundamental understanding of the material science and rheological engineering to fabricate Torlon^® 4000T-MV and 4000TF hollow fiber membranes with an ultra-thin and defect-free dense-selective layer for gas separation has been revealed. We have firstly investigated the rheology of Torlon^® 4000T-MV and 4000TF dope solutions, and then determined the effect of temperature-correlated shear and elongational viscosities on the formation of Torlon^® fibers for gas separation. Interestingly, Torlon^® 4000T-MV and 4000TF possess different rheological characteristics: the elongational viscosity of Torlon^® 4000T-MV/NMP solution shows strain thinning, while Torlon^® 4000TF/NMP solution shows strain hardening. The balanced viscoelastic properties of dope solutions, which are strongly dependent on the spinning temperature, have been found to be crucial for the formation of a defect-free dense layer. The optimum rheological properties to fabricate Torlon^® 4000T-MV/NMP hollow fibers appear at about 48–50 °C, and the resultant fibers have an O₂/N₂ selectivity of 8.37 and an apparent dense layer thickness of 781 Å. By comparison, the best Torlon^® 4000TF fibers were spun at 24 °C with an O₂/N₂ selectivity of 8.96 and a dense layer of 1116 Å. The CO₂/CH₄ selectivity of the above two Torlon^® variants is 47 and 53.5, respectively.     

Three component ketocoumarin, amine, maleimide photoinitiator II

Three component photoinitiator systems containing N-substituted maleimide/ketocoumarin/tertiary amine have been used for the visible light photopolymerization of acrylate and thiol-ene monomers. Thin-film calorimetry studies were conducted. The polymerization exotherms of these systems with the blue (470 nm) and cyan (505 nm) LED light sources show that the multicomponent initiator package is an effective system for visible light polymerization of acrylate and thiol-ene monomers. Exotherms of a visible light initiator combination of camphorquinone/amine were recorded for comparison purposes.     

Preparation and characterization of fluorine-containing acrylate copolymers by Co γ-ray radiation co-polymerization

A series of fluorine-containing acrylate copolymers were prepared by ⁶⁰Co γ-ray radiation co-polymerization in a mixed acrylate system, including butyl acrylate, acrylic acid, acrylonitrile, N-hydroxymethyl acrylamide and perfluoroalkylethyl methacrylate (FMA). The yield of the copolymers reached 96% when they were radiated for 34 h with the radiation dose of 1 kGy/h. Moreover, the surface structure and properties of the copolymers were determined by Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS) and contact angle (CA) analysis. And the glass-transition temperature was measured by dynamic mechanical thermal analysis (DMTA). It was found that the fluoropolymer was of large water static contact angle and fluorine was enriched at the polymer-air interface. The relationship between the copolymer composition, annealed temperature and static contact angle was also discussed in detail. Furthermore, when the FMA content reached 3%, the cotton treated with our products exhibited better oil repellency.     

Novel interpenetrating smart polymer networks grafted onto polypropylene by gamma radiation for loading and delivery of vancomycin

Gamma radiation was used in every step of the synthesis of a sequential interpenetrating polymer network made of two “smart” polymers: poly(acrylic acid) (PAAc) and poly (N-isopropylacrylamide) (PNIPAAm), the latter grafted onto polypropylene (PP) films (PP-g-PNIPAAm) with the aim of developing medicated coatings for medical devices. Three steps were followed for obtaining net-PP-g-PNIPAAm-inter-net-PAAc: graft copolymerization of PNIPAAm onto PP films by gamma pre-irradiation oxidative method, cross-linking of PP-g-PNIPAAm by gamma irradiation in water to form the first network, with or without N,N′-methylenebis(acrylamide) (MBAAm), and finally the formation of the second network through the polymerization and cross-linking of AAc inside cross-linked PP-g-PNIPAAm by a low gamma radiation dose of 2.5 kGy. The films were characterized regarding the amount of grafted polymers and their composition (FTIR-ATR), thermal behavior (DSC), temperature- and pH-responsive swelling and contact angle (critical pH 6 and lower critical solution temperature ∼33 °C), and loading and release rate of vancomycin. Drug loading was driven by specific interactions between vancomycin and PAAc. Drug-loaded films sustained the delivery for several hours at pH 7.4 and provided release rate values adequate for killing bacteria attempting to adhere the surface of the films.     

Simultaneous determination of sulfamonomethoxine, sulfadimethoxine, and their hydroxy/N(4)-acetyl metabolites with gradient liquid chromatography in chicken plasma, tissues, and eggs

A simultaneous determination of sulfamonomethoxine, sulfadimethoxine, and their hydroxy/N⁴-acetyl metabolites in chicken plasma, muscle, liver, and eggs using gradient high-performance liquid chromatography (HPLC) with a photo-diode array detector is developed. All the compounds are extracted by a handheld ultrasonic homogenizer with ethanol followed by centrifugation. The separation is performed by a reversed-phase C4 column with a gradient elution (ethanol:1% (v/v) acetic acid, v/v; 10:90 → 20:80). Average recoveries from samples spiked at 0.1-1.0 μg g⁻¹ or μg ml⁻¹ for each drug were >90% with relative standard deviations within 4%. The limits of quantitation were <30 ng g⁻¹ or ng ml⁻¹.     

Synthesis, characterisation and evaluation of poly[lactose acrylate-N-vinyl-2-pyrrolidinone] hydrogels for drug delivery

New biodegradable polymeric hydrogels based on biocompatible materials, lactose acrylate (LA) and N-vinyl-2-pyrrolidinone were designed and synthesized. LA was synthesized and characterized by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy. Hydrogel synthesis was carried out by free-radical polymerization of the co-monomers using azobisisobutyronitrile as initiator and N,N^′-methylenebisacrylamide as crosslinker. These hydrogels were also characterized. Equilibrium swelling of the hydrogels was studied in phosphate buffer of physiological pH, 7.4 and at 37 °C. Propranolol hydrochloride was entrapped into these hydrogels and the in vitro release profile of this drug was established in phosphate buffer. The drug release followed a near zero-order fashion in the first 6 h and thereafter slowed down releasing more than 90% of the entrapped drug at the end of 48 h.     

Diastereo- and enantioseparation of a N-Boc amino acid with a zwitterionic quinine-based stationary phase: Focus on the stereorecognition mechanism

A chiral chromatography method enabling the simultaneous diastereo- and enantioseparation of N^α-Boc-N⁴-(hydroorotyl)-4-aminophenylalanine [Boc-Aph(Hor)-OH, 1] was optimized with a quinine-based zwitterionic stationary phase. The polar-ionic eluent system consisting of ACN:MeOH:water—49.7:49.7:0.6 (v/v/v) with formic acid (4.0 mM) and diethylamine (2.5 mM), allowed the successful separation of the four acid stereoisomers: α_d,d-/d,l-1 = 1.08; α_d,l-/l,d-1 = 1.08; α_l,d-/l,l-1 = 1.40.     

Characterization and optimization of poly(glycidyl methacrylate-co-styrene) synthesized by atom transfer radical polymerization

Styrene (S) and glycidyl methacrylate (GMA) copolymers were synthesized by atom transfer radical polymerization (ATRP) under different conditions. The effect of initiators, ligands, solvents, and temperature to the linear first-order kinetics and polydispersity index (PDI) was investigated for bulk polymerization. First-order kinetics was observed between linearly increasing molecular weight versus conversion and low polydispersities (PDI) were achieved for ethyl 2-bromo isobutyrate (EBiB) as an initiator and N,N′,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA)/CuBr as a catalyst. The copolymers with different compositions were synthesized using different in-feed ratios of monomers. Copolymers composition was calculated from ¹H NMR spectra which were further confirmed by quantitative ¹³C{¹H} NMR spectra. The monomer reactivity ratios were obtained with the help of Mayo-Lewis equation using genetic algorithm method. The values of reactivity ratios for glycidyl methacrylate and styrene monomers are r_G = 0.73 and r_S = 0.42, respectively.     

An assay for identification and determination of toxic rodenticide valone in serum by ion chromatography-electrospray ionization tandem mass spectrometry with ion trap detector

Valone has a chronic and toxic anticoagulant rodenticide that has widely used in China and has resulted in some accidental and intentional intoxication in recent years. The literature reported so far lacks sensitive and selective method for the confirmation of valone. The purpose of this study was to establish a novel assay for the identification and quantification of valone in serum by ion chromatography-electrospray ionization tandem mass spectrometry (IC-MS/MS). After serum sample was extracted with methanol/acetonitrile (10:90, v/v) and cleaned by Oasis^® HLB solid-phase extraction cartridge, chromatographic separation was performed on an Ionpac^® AS11 column with an eluent of methanol/30 mmol/L KOH (10:90, v/v). The overall extraction efficiency was >81.0%, and the limit of quantification was 0.5 ng/mL for valone. Regression analysis of the calibration data revealed good correlation (r² > 0.99) for valone. Intra- and inter-day precisions for quality-control samples were less than 8.0 and 13.7%, respectively. The proposed method enables the identification and quantification of valone in both clinical and forensic specimens.     

The Pharmaceutical Use of Captisol®: Some Surprising Observations

The purpose of this paper is to share some recent observations on the pharmaceuticaluses and properties of Captisol^® or SBE_7M--CD in controlled porosity osmotic pump tablets (CP-OPT) and the underlying mechanism/sthat lead to apparent zero-order drug release pattern. It would have been simple toattribute the apparent zero-order release mechanism/s of poorly water-soluble drugsfrom CP-OPTs and pellets utilizing Captisol^®as both a solubilizing andosmotic agent, to purely osmotic and diffusional components. However, the mechanismmay be more related to a counterbalancing of physical properties as the concentration of Captisol^®changes within the matrix. Specifically, the initial concentration of Captisol^®within a core is 0.3–0.4M. When this drops to lower values an osmotic pressure drop occurs across the membrane. Therefore, drug release should not follow apparent zero-order kinetics if all the drug is solubilized. However, as the viscosity within the tablet also drops, the apparent diffusion coefficient of both Captisol^® and drug increases. Therefore, it appears that there is an initial resistance (hydraulic pressure) to fluid flow from the tablet through the rate-limiting microporous membrane. This resistance decreases so that even as osmotic pressure and concentration differences drop with time, counterbalancing faster release occurs. Osmotic driving force appears to be the most important initial driving force but a diffusional component becomes more significant with time.     

Development and validation of a HPLC method for the determination of voriconazole in pharmaceutical formulation using an experimental design

A rapid and sensitive RP-HPLC method with UV detection (260 nm) for routine analysis of voriconazole in a pharmaceutical formulation (Vfend^®) was developed. Chromatography was performed with mobile phase containing a mixture of acetonitrile and water (50:50, v/v) with flow rate was of 1.0 ml min⁻¹. Quantitation was accomplished with internal standard method. The procedure was validated for linearity (correlation coefficient = 0.9999), accuracy, robustness and intermediate precision. Experimental design was used for validation of robustness and intermediate precision. To test robustness, three factors were considered. Percentage of acetonitrile in mobile phase, flow rate and p^H; an increase in the flow rate results in a decrease of the drug found concentration, while the percentage of organic modifier and p^H have no important effect on the response. For intermediate precision measure the variables considered were: analyst, equipment and number of days. The R.S.D. value (0.45%, n = 24) indicated a good precision of the analytical method. The proposed method was simple, highly sensitive, precise and accurate and retention time less than 4 min indicating that the method is useful for routine quality control.     

Determination of organophosphorus pesticides in ecological textiles by solid-phase microextraction with a siloxane-modified polyurethane acrylic resin fiber

A novel solid-phase microextraction (SPME) fiber coating was prepared with siloxane-modified polyurethane acrylic resin by photo-cured technology. The ratio of two monomers was investigated to obtain good microphase separation structure and better extraction performance. The self-made fiber was then applied to organophosphorus pesticides (OPPs) analysis and several factors, such as extraction/desorption time, extraction temperature, salinity, and pH, were studied. The optimized conditions were: 15 min extraction at 25 °C, 5% Na₂SO₄ content, pH 7.0 and 4 min desorption in GC inlet. The self-made fiber coating exhibited better extraction efficiency for OPPs, compared with three commercial fiber coatings. Under the optimized conditions, the detection limits of 11 OPPs were from 0.03 μg L⁻¹ to 0.5 μg L⁻¹. Good recoveries and repeatabilities were obtained when the method was used to determine OPPs in ecological textile.     

Numerical and experimental depth profile analyses of coated and attached layers by laser-induced breakdown spectroscopy

Laser-induced breakdown spectroscopy (LIBS) is applied for depth profile analysis of different thicknesses of copper foils attached on steel and aluminum substrates. In order to account interfacial effects, depth profile analysis of copper coated on steel is also carried out. Experiments are done at ambient air and at two different wavelengths of 266 and 1064 nm of a Nd:YAG laser with pulse durations of 5 ns. A three-dimensional model of multi-pulse laser ablation is introduced on the base of normal evaporation mechanism and the simulation results are compared with the experiments. A normalized concentration (C^N) is introduced for determination of interface position and results are compared with the usually used normalized intensity (I^N). The effect of coating thickness on average ablation rate and resolution of depth profiling are examined. There is a correlation coefficient higher than 0.95 between the model and experimental depth profiles based on the C^N method. Depth profile analysis on the base of C^N method shows a better depth resolution in comparison with I^N method .Increase in the layer thickness, leads to a decrease in the ablation rate.     

Self-aggregated nanoparticles of cholesterol-modified chitosan conjugate as a novel carrier of epirubicin

Cholesterol-modified chitosan conjugate with succinyl linkages (CHCS) was synthesized and characterized by fourier transform infrared (FTIR) and proton nuclear magnetic resonance (¹H NMR). The degree of substitution (DS) of cholesterol moiety determined by elemental analysis was 7.3%. The self-aggregation behavior of CHCS was evaluated by the fluorescence probe technique and the critical aggregation concentration (CAC) was 1.16 × 10⁻² mg mL⁻¹ in 0.1 M acetic acid solution. CHCS formed monodisperse self-aggregated nanoparticles with a roughly spherical shape and a mean diameter of 417.2 nm by probe sonication in aqueous media. Epirubicin (EPB), as a model anticancer drug, was physically entrapped inside CHCS self-aggregated nanoparticles by the remote loading method and the characteristics of EPB-loaded CHCS self-aggregated nanoparticles were analyzed using dynamic laser light scattering (DLLS), transmission electron microscopy (TEM) and fluorescence spectroscopy. EPB-loaded CHCS self-aggregated nanoparticles were almost spherical in shape and their size increased from 338.2 to 472.9 nm with the EPB-loading content increasing from 7.97% to 14.0%. The release behavior of EPB from CHCS self-aggregated nanoparticles was studied in vitro by dialysis method. The results showed that EPB release rate decreased with the pH increase of the release media. In phosphate buffered saline (PBS, pH 7.4), the EPB release was very slow and the total release amount was about 24.9% in 48 h.     

Accessing DNA by low voltage alternating current Joule effect heating

A DNA release sample preparation method based on the use of low voltage alternating currents (LVACs) to generate Joule effect heating (JEH) is reported. This is a simple cell disruption strategy that offers internal, homogenous, rapid and low power consumption heating for the access of analytical grade DNA in seconds.A 100 μL JEH microreactor with a parallel and symmetric two electrode arrangement for uniform field generation was fabricated by machining and used to characterise JEH and DNA release from human epithelia, yeast (Saccharomyces cerevisiae) and Gram-positive bacteria (Enterococcus faecium) cell types. A 1 kHz sinusoidal low voltage (e.g. 10 Vrms) alternating current was used to reduce electrode:sample interactions. Following 96 °C JEH treatment, effective DNA release was identified by PicoGreen^® quantification for all three cell types. The JEH treated sample material was further successfully used, without purification, as a PCR template. Exposure to JEH-mediated 96 °C temperatures for a 1 s duration was used to provide PCR-grade DNA template material from S. cerevisiae and E. faecium cells, and a 10 s duration was used for human epithelia cells. However, prolonged (>1 min) exposure to 96 °C JEH-mediated temperatures resulted in diminished DNA returns and the production of components that interfered with the PCR reaction.Further miniaturisation of the LVAC JEH cell by microfabrication was considered, and a JEH microreactor designs were evaluated by FLOTHERM v3.2 thermal modelling. Thermal isolation, using a free-standing cavity structure was identified as an excellent means to enable rapid heating (220 °C s⁻¹) with low power consumption (0.2 W).