Retention behaviour in liquid and supercritical fluid chromatography using methanol or diethyl ether as mobile phase

Summary Effects of column temperature and pressure on the retention behaviour of aromatic hydrocarbons were investigated in liquid and supercritical fluid chromatography by using a packed column and methanol or diethyl ether as the mobile phase. Oligomers of styrene, polysiloxane and a non-ionic detergent were separated by temperature- and pressure-gradient elution.     

Retention prediction in reversed-phase liquid chromatography systems with methanol/water mobile phases containing different alkanols as additives

In an effort to gain enhancement of selectivity in reversed-phase liquid chromatography, retention was tuned in this study by introducing short and medium straight-chained-length alkanol additives (methanol (MeOH), ethanol, 1-propanol, 1-butanol, 1-pentanol, 1-hexanol or 1-heptanol) at low concentrations in mobile phases containing MeOH as the main organic solvent. A six-parameter retention model considering simultaneously the contents of the main organic modifier and of the alcohol additive as well as of the number of alkyl chain of additive was developed by a direct combination of equations expressing separately a linear dependence of the retention upon each of these factors. The effectiveness of the above model was tested in the retention prediction of a mixture of six alkylbenzenes under isocratic conditions with mobile phases containing as an additive any member of the homologues series of alkanols (with 1-7 carbon atoms) at different low concentrations in a wide range of MeOH-water mixtures. The prediction was excellent in all cases even when the alkanol additives used in experiments for the fitting procedure are different than those used in chromatographic runs done for testing the prediction ability of the proposed model.     

Mobile phase effects in reversed-phase liquid chromatography: a comparison of acetonitrile/water and methanol/water solvents as studied by molecular simulation

Molecular simulations of water/acetonitrile and water/methanol mobile phases in contact with a C(18) stationary phase were carried out to examine the molecular-level effects of mobile phase composition on structure and retention in reversed-phase liquid chromatography. The simulations indicate that increases in the fraction of organic modifier increase the amount of solvent penetration into the stationary phase and that this intercalated solvent increases chain alignment. This effect is slightly more apparent for acetonitrile containing solvents. The retention mechanism of alkane solutes showed contributions from both partitioning and adsorption. Despite changes in chain structure and solvation, the molecular mechanism of retention for alkane solutes was not affected by solvent composition. The mechanism of retention for alcohol solutes was primarily adsorption at the interface between the mobile and stationary phase, but there were also contributions from interactions with surface silanols. The interaction between the solute and surface silanols become very important at high concentrations of acetonitrile.     

Separation of imidacloprid and its degradation products using reversed phase liquid chromatography with water rich mobile phases

Water rich mobile phases in RPLC are not generally used because of the longer retention times involved when organic modifiers such as methanol or acetonitrile are used. The problem of longer retention times can be addressed using hydrophobic alcohols such as pentanol in low quantities (less than 1%) as organic modifiers. The advantages of using these mobile phases in RPLC for the separation of water soluble and weakly retained congeners is demonstrated through the separation of imidacloprid and its degradation products using a 0.4% pentanol in water mobile phase with 0.2% acetic acid.     

Retention prediction of large and condensed polycyclic aromatic hydrocarbons in reversed-phase microcolumn liquid chromatography with diphenylsilica stationary phase

The retention behavior of condensed large polycyclic aromatic hydrocarbons has been investigated with diphenylsilica stationary phases in reversed-phase microcolumn liquid chromatography. The results were correlated with two parameters which indicate size and shape of the molecules. Since the resulting equation can be used for retention prediction of large polycyclic aromatic hydrocarbons, computer-assisted “standardless” identification is accomplished for “unknown” compounds contained in the standard.     

Validation of the extended Tanaka column characterization protocol by multivariate analysis of chromatographic retention of low‐molecular‐weight analytes on reversed phase columns using methanol and acetonitrile as organic modifiers

The validity of the extended Tanaka column characterization procedure against the retention behavior of 101 analytes of widely differing properties chromatographed on five differing stationary phase chemistries has been established using a chemometric technique called principal component analysis (PCA). It was concluded that the simple and conveniently determined column characterization parameters covered the same space in the PCA loading plot as the retention times for the 101 differing analytes. This confirms that the ten column characterization parameters of the extended Tanaka protocol encode the same information as the retention times of the 101 analytes. Significant selectivity differences were observed between stationary phases and the mobile‐phase modifiers – MeOH and MeCN. PCA contribution plots served as a convenient way to highlight specific selectivity differences between stationary phases. logD values exhibited a poor correlation with retention indicating that retention in RP‐LC is not solely dictated by the analyte's hydrophobicity. The use of MeOH was found to generate greater selectivity differences with the five stationary phases than when MeCN is used.     

Online combination of reversed-phase/reversed-phase and porous graphitic carbon liquid chromatography for multicomponent separation of proteomics and glycoproteomics samples

In this paper, we describe an online combination of reversed‐phase/reversed‐phase (RP–RP) and porous graphitic carbon (PGC) liquid chromatography (LC) for multicomponent analysis of proteomics and glycoproteomics samples. The online RP–RP portion of this system provides comprehensive 2‐D peptide separation based on sequence hydrophobicity at pH 2 and 10. Hydrophilic components (e.g. glycans, glycopeptides) that are not retained by RP are automatically diverted downstream to a PGC column for further trapping and separation. Furthermore, the RP–RP/PGC system can provide simultaneous extension of the hydropathy range and peak capacity for analysis. Using an 11‐protein mixture, we found that the system could efficiently separate native peptides and released N‐glycans from a single sample. We evaluated the applicability of the system to the analysis of complex biological samples using 25 μg of the lysate of a human choriocarcinoma cell line (BeWo), confidently identifying a total of 1449 proteins from a single experiment and up to 1909 distinct proteins from technical triplicates. The PGC fraction increased the sequence coverage through the inclusion of additional hydrophilic sequences that accounted for up to 6.9% of the total identified peptides from the BeWo lysate, with apparent preference for the detection of hydrophilic motifs and proteins. In addition, RP–RP/PGC is applicable to the analysis of complex glycomics samples, as demonstrated by our analysis of a concanavalin A‐extracted glycoproteome from human serum; in total, 134 potentially N‐glycosylated serum proteins, 151 possible N‐glycosylation sites, and more than 40 possible N‐glycan structures recognized by concanavalin A were simultaneously detected.     

Comprehensive characterization of Stevia Rebaudiana using two-dimensional reversed-phase liquid chromatography/hydrophilic interaction liquid chromatography

Two-dimensional reversed-phase liquid chromatography/hydrophilic interaction liquid chromatography (2D-RPLC/HILIC) system was successfully applied for comprehensive characterization of steviol glycosides from Stevia rebaudiana. The experiments were performed in offline mode using an XCharge C18 column in first dimension and an XAmide column in second dimension. In first dimension, preliminary separation of Stevia aqueous extract was accomplished and 30 fractions were collected. Then fractions 1-20 were selected for further purification and 13 compounds with high purity were obtained in second dimension. Comprehensive characterization of these compounds was completed by determination of their retention time, accurate molecular weight, diagnostic fragmentation ions, and nuclear magnetic resonance spectroscopy. As a result, all nine known steviol glycosides, as well as other four steviol glycosides were fully purified. The result demonstrated that this procedure is an effective approach for the preparative separation and comprehensive characterization of steviol glycosides in Stevia. This 2D-RPLC/HILIC method will be a promising tool for the purification of low-abundance compounds from natural products.     

Retention behavior of o-phthalic, 3-nitrophthalic, and 4-nitrophthalic acids in ion-suppression reversed-phase high performance liquid chromatography using acids instead of buffers as ion-suppressors

In reversed-phase high performance liquid chromatography, the logarithm of the retention factor, log k, is usually correlated with the logarithm of the octanol-water partition coefficient, log Kow. The k and Kow of an ionizable analyte are greatly influenced by the mobile phase pH. In this paper, log kw of diprotic o-phthalic, 3-nitrophthalic, and 4-nitrophthalic acids, are obtained by extrapolation to pure aqueous fraction of mobile phase in ion-suppression reversed-phase high performance liquid chromatography with acetic acid and perchloric acid as the ion-suppressors. The Kow values of the three analytes are calibrated according to the apparent octanol-water partition coefficient, Kow, under different pH conditions, and the log K"ow values show a much better correlation with log kw than do log Kow. The influences of two ion-suppressors, acetic and perchloric acids, on the retention behavior of these diprotic acids at different pH are contrasted. An abnormal trend is found in the k vs. pHw plot of the acetic acid system when the methanol content is low. A possible reason is that acetic acid is an even stronger organic modifier than methanol, besides being an ion-suppressor. The results make the selection of mobile phase for the separation of acidic compounds by ion-suppression reversed-phase high performance liquid chromatography direct, accurate, and practical.     

Effects of solute-solvent and solvent-solvent association in liquid adsorption chromatography with binary mobile phase

Analytical equations for the capacity ratio in liquid adsorption chromatography with a binary mobile phase, involving solute-solvent and solvent-solvent association in the mobile and surface phases, have been derived. Very simple equations have been obtained for higher values of mole fraction of the more efficient eluting solvent.     

Indirect detection in reversed-phase liquid chromatography: Ion-pair retention models for anionic analytes and mobile phase components on polystyrene polymers using an alkaline mobile phase

Summary Retention models for anionic analytes and mobile phase compounds in reversed-phase ion-pair chromatographic systems have been studied. The solid phase was a polystyrene-divinylbenzene copolymer. The analytes were mono- and divalent anions monitored by indirect detection technique. The mobile phase was highly alkaline and contained a detectable anion, sulfanilic acid.Expressions for the ion-pair retention of solutes and mobile phase components have been developed assuming Langmuir distribution of ion-pairs to a solid phase with one kind of binding site. The validity of the expressions and the origin of system peaks have been confirmed by determination of distribution constants using linear regression.     

Mobile phase effects in reversed-phase chromatography VI. Thermodynamic models for retention and its dependence on mobile phase composition and temperature

Summary The physico-chemical framework is examined by comparing the predictions of three models for the combined effects of the composition of the hydroorganic mobile phase and the column temperature on the retention ofn-alkylbenzenes on hydrocarbonaceous bonded stationary phases. The well-mixed model leads to expressions for the dependence of retention on three factors which are equivalent to those derived previously from linear extrathermodynamic relationships. The diachoric model stems from the assumption that the mobile phase is microscopically heterogeneous and the displacement model is identical to the retention model most widely used in chromatography with polar sorbents and less polar solvents. Over limited ranges of mobile phase composition and temperature, each model does describe retention behavior. However, only the wellmixed model describes retention well over the entire range of mobile phase composition and temperature studied here. The success of the well-mixed model, and its limits, give insight into the role of the organic solvent in determining the magnitude of chromatographic retention on non-polar stationary phases with hydro-organic eluents.Dedicated to Professor S. R. Lipsky on the occasion of his 60th birthday.     

Retention prediction of small peptides in reversed-phase liquid chromatography

Summary Retention prediction of small peptides (up to four residues) in reversed-phase liquid chromatography has been investigated, considering the contributions of side chains in each position to the peptide retention. In isocratic elution the retention of peptides could be predicted within about 8% relative error.     

Retention prediction of polycyclic aromatic hydrocarbons in reversed phase liquid chromatography with various mobile phase compositions and column temperatures

Summary The relationship between the logarithmic capacity factor measured in reversed-phase liquid chromatography and the operating conditions including the mobile phase composition and the column temperature is investigated. The strategy described herein can offer the possibility to predict the retention of polycyclic aromatic hydrocarbons without any experiments and standard materials, by utilizing equations describing the relationships between retention, temperature, mobile phase composition and physicochemical properties of the solutes previously stored in the program of the microcomputer-assisted retention prediction system.This concept is one of the most promising techniques for the optimization of the separation conditions in reversed-phase liquid chromatography.     

Evaluation of ternary mobile phases for reversed-phase liquid chromatography: Effect of composition on retention mechanism

The effect of varying mobile phase composition across a ternary space between two binary compositions is examined, on four different reversed-phase stationary phases. Examined stationary phases included endcapped C8 and C18, as well as a phenyl phase and a C18 phase with an embedded polar group (EPG). Mobile phases consisting of 50% water and various fractions of methanol and acetonitrile were evaluated. Retention thermodynamics are assessed via use of the van’t Hoff relationship, and retention mechanism is characterized via LSER analysis, as mobile phase composition was varied from 50/50/0 water/methanol/acetonitrile to 50/0/50 water/methanol acetonitrile. As expected, as the fraction of acetonitrile increases in the mobile phase, retention decreases. In most cases, the driving force for this decrease in retention is a reduction of the enthalpic contribution to retention. The entropic contribution to retention actually increases with acetonitrile content, but not enough to overcome the reduction in the enthalpic contribution. In a similar fashion, as methanol is replaced with acetonitrile, the v, e, and a LSER system constants change to favor elution, while the s and c constants change to favor retention. The b system constant did not show a monotonic change with mobile phase composition. Overall changes in retention across the mobile phase composition range varied, based on the identity of the stationary phase and the composition of the mobile phase.     

Retention models for isocratic and gradient elution in reversed-phase liquid chromatography

One- and multi-variable retention models proposed for isocratic and/or gradient elution in reversed-phase liquid chromatography are critically reviewed. The thermodynamic, exo-thermodynamic or empirical arguments adopted for their derivation are presented and discussed. Their connection to the retention mechanism is also indicated and the assumptions and approximations involved in their derivation are stressed. Special attention is devoted to the fitting performance of the various models and its impact on the final predicted error between experimental and calculated retention times. The possibility of using exo-thermodynamic retention models for prediction under gradient elution is considered from a practical point of view. Finally, the use of statistical weights in the fitting procedure of a retention model and its effect on the calculated elution times as well as the transferability of retention data among isocratic and gradient elution modes are also examined and discussed.     

Separation of peroxidation products of diacyl-phosphatidylcholines by reversed-phase liquid chromatography-mass spectrometry

Lipid peroxidation process has attracted much attention due to the growing evidence of its involvement in the pathogenesis of age-related diseases. The monitoring of the lipid peroxidation products in phospholipids, formed under oxidative stress conditions, may provide new markers for oxidative stress signaling and for disease states, giving new insights in the pathogenesis process. Reversed-phase liquid chromatographic method coupled to mass spectrometry was developed for the separation of oxidized glycero-phosphatidylcholine (GPC) peroxidation products formed by the Fenton reaction that mimic in vivo oxidative stress conditions. The LC-MS conditions were applied for the separation of peroxidation products of oleoyl- (POPC), lineloyl- (PLPC) and arachidonoyl-palmitoyl phosphatidylcholine (PAPC). The peroxidation products separated included products resulting from the insertion of oxygen atoms in the sn-2 chain (long-chain), and products with the sn-2 chain shortened resulting from cleavage of oxygen-centered radicals (short-chain). Among long-chain products were the keto, hydroxy, hydroperoxide and poly-hydroxy derivatives, while short-chain products included dicarboxylic acids, aldehydes and hydroxy-aldehydes. Separation of long-chain products formed in each phosphatidylcholine was observed, and the reconstructed ion chromatogram of each ion showed an increase in the number of peaks with the increase in the number of oxygen atoms inserted into the phospholipid. Separation of short-chain products took place according to the functional group present at the sn-2 moiety that allowed the elution of dicarboxylic acids distinct from aldehydes. Separation between isomeric structures that were present in short- and long-chain products was also achieved.     

Bonded stationary phases for reversed phase liquid chromatography with a water mobile phase: application to subcritical water extraction

Reversed phase high-performance liquid chromatography (RP-HPLC) is demonstrated for hydrophobic analytes such as aromatic hydrocarbons on a chemically bonded stationary phase and a mobile phase consisting of only water. Reversed phase liquid chromatography separations using a water-only mobile phase has been termed WRP-LC for water-only reversed phase LC. Reasonable capacity factors are achieved through the use of a non-porous silica substrate resulting in a chromatographic phase volume ratio much lower than usually found in RP-HPLC. Two types of bonded WRP-LC columns have been developed and applied. A brush phase was synthesized from an organochlorosilane. The other phase, synthesized from an organodichlorosilane, is termed a branch phase and results in a polymeric structure of greater thickness than the brush phase. A baseline separation of a mixture containing benzaldehyde, benzene, toluene, and ethyl benzene in less than 5 min is demonstrated using a water mobile phase with 12 000 plates generated for the unretained benzaldehyde peak. The theoretically predicted minimum reduced plate height is also shown to be approached for the unretained analyte using the brush phase. As an application, subcritical water extraction (SWE) at 200°C is combined with WRP-LC. This combination allows for the extraction of organic compounds from solid matrices immediately followed by liquid chromatographic separation of those extracted compounds all using a solvent of 100% water. We demonstrate SWE/WRP-LC by spiking benzene, ethyl benzene, and naphthalene onto sand then extracting the analytes with SWE followed by chromatographic separation on a WRP column. A sand sample contaminated with gasoline was also analyzed using SWE/WRP-LC. This extraction process also provides kinetic information about the rate of analyte extraction from the sand matrix. Under the conditions employed, analytes were extracted at different rates, providing additional selectivity in addition to the WRP-LC separation.     

A linear relationship between partition ratio and composition of a binary mobile phase in reversed-phase liquid chromatography using chemically bonded stationary phases

A simple linear relationship which enables the effect of the composition of a binary mobile phase on the retention of a solute to be assessed in reverse phase liquid chromatography using a bonded stationary phase has been derived. The equations have been tested using published experimental data.