Superhydrophobic and superoleophilic polyethylene aerogel coated natural rubber latex foam for oil-water separation application

The oil-water separation has made an attention due to over-increased production of oily water from the industrial process and everyday routine of humans. The current work reports on preparation and characterization of High-Density Polyethylene (HDPE) aerogel coated Natural Rubber Latex foam (NRLF) with superhydrophobic and superoleophilic character, good sorption capacity for oil-water separation application and were investigated. The HDPE aerogel and the coated NRLF material was prepared by a cooling process from a solution of HDPE in xylene solvent (HDPE sole, which resulted into thermally induced phase separation of the Polyethylene molecular network). The HDPE aerogel coated NRLF displayed a porous surface morphology with particle-like structural features. The HDPE aerogel coated NRLF showed superhydrophobicity with static water contact angle >150°. The effect and recyclability of the HDPE aerogel coated NRLF for oil-water separation was investigated using different model oil solvents to explore their repeatable application in oil spill clean-up process. Modified NRLF shows an excellent mechanical property (compressibility). The average modulus and average stiffness of the modified NRLF increased with the increase of the concentration of HDPE sol. The modified superhydrophobic sponge has good durability under acid and base conditions.     

3D hierarchical MnO2 aerogels with superhydrophobicity for selective oil–water separation

Inorganic nanowire aerogel with low density, high specific surface area and high porosity has received increasing attention in the field of materials physics and chemistry because of not only the unique structural and physical features of metallic oxide but also low cost, environmental friendliness and earth abundant of precursor materials. In this work, MnO₂ nanowire aerogels (MNA) with ultralow density, and stable 3D hierarchical structures was successfully fabricated by freeze‐drying processes using MnO₂ nanowire as building blocks. The length of MnO₂ nanowires exceeds 100 μm, making it easier to cross‐link and self‐assemble into a 3D network of aerogels, and the acid and alkali resistance of MnO₂ enables it to adapt to extreme environments. Simultaneously, the monodispersed MnO₂ nanowire was prepared by the hydrothermal method, followed by acid treatment. To obtain superhydrophobic properties and achieve selective oil adsorption, the surfaces of nanowire aerogels were grafted the hydrophobic groups with low surface energy via vapor deposition. It is indicated that the obtained 3D hierarchical MNA show both superhydrophobic and super‐lipophilic properties simultaneously with a high‐water contact angle of 156°  ±  2° and an oil contact angle of 0°. And the MNA exhibited a high oil adsorption capacity of 85–140 g/g, thereby indicating its potential applications in oil/water separation. More importantly, the resulting MNA can be recycled ten cycles without loss of oil absorption capacity (more than 120 g/g). The results presented in this work demonstrate that the as‐prepared nanowire aerogel may find applications in chemical separation and environmental remediation for large‐scale absorption of oils from water.     

Micro–nano structural engineering of filter paper surface for high selective oil–water separation

Cellulose-based lotus-leaf-like filter paper for selective separation of oil/water was prepared. Experimentally, cellulose nanofibril aerogel microspheres prepared by ultrasonic atomization method were coated on commercial filter papers to form unique “micro–nano” structured surface. By controlling both the morphology and chemistry of the surface, the papers could be either under-water superoleophobic or under-oil superhydrophobic. It was found that the filter papers could be engineered to effectively filter only oil or only water from their mixtures.     

Green Approach to the Fabrication of Superhydrophobic Mesh Surface for Oil/Water Separation

We report a simple and environment friendly method to fabricate superhydrophobic metallic mesh surfaces for oil/water separation. The obtained mesh surface exhibits superhydrophobicity and superoleophilicity after it was dried in an oven at 200 °C for 10 min. A rough silver layer is formed on the mesh surface after immersion, and the spontaneous adsorption of airborne carbon contaminants on the silver surface lower the surface free energy of the mesh. No low‐surface‐energy reagents and/or volatile organic solvents are used. In addition, we demonstrate that by using the mesh box, oils can be separated and collected from the surface of water repeatedly, and that high separation efficiencies of larger than 92 % are retained for various oils. Moreover, the superhydrophobic mesh also possesses excellent corrosion resistance and thermal stability. Hence, these superhydrophobic meshes might be good candidates for the practical separation of oil from the surface of water.     

Absorption and desorption of organic liquids in elastic superhydrophobic silica aerogels

The experimental results of the studies on the absorption and desorption of organic liquids in elastic superhydrophobic silica aerogels, are reported. The elastic superhydrophobic aerogels were prepared using methyltrimethoxysilane (MTMS) precursor by a two-step sol-gel process followed by supercritical drying. Monolithic superhydrophobic silica aerogels were used as the absorbents. In all, four alkanes, three aromatic compounds, four alcohols and three oils were used. The absorption property of the aerogel was quantified by the mass and moles of the organic liquid absorbed by unit mass of the aerogel. The superhydrophobic aerogels showed a very high uptake capacity and high rate of uptake. The desorption of solvents and oils was studied by maintaining the as-absorbed aerogel samples at various temperatures and weighing them at regular time intervals until all the absorbed liquid got totally desorbed. This was verified by measuring the weights of the aerogel samples before and after desorption. The transmission electron micrograph observations showed that the aerogel structure was not much affected by the solvent absorption, while the oil absorption led to the shrinkage resulting in a dense structure after the desorption. In all the cases, the aerogels retained hydrophobicity and could be re-used as absorbents.     

Transport of liquids using superhydrophobic aerogels

The experimental results of the studies on the transportation of water droplets on a superhydrophobic silica aerogel-powder-coated surface are reported. The superhydrophobic silica aerogels were prepared using sol-gel processing of methyltrimethoxysilane (MTMS) precursor, methanol (MeOH) solvent, and base (NH4OH)-catalyzed water followed by supercritical drying using methanol solvent. The molar ratio of NH4OH/MTMS, H2O/MTMS, and MeOH/MTMS were varied from 1.7x10(-1) to 3.5x10(-1), 2 to 8, and 1.7 to 14, respectively, to find out the best-quality aerogels in terms of higher hydrophobicity and high droplet velocity. A specially built device was used for the measurement of velocity of water droplet of size 2.8 mm (+/-0.2 mm) on an inclined surface coated with superhydrophobic aerogel powder. Liquid marbles were prepared by rolling water droplets on aerogel powder and the marble(s) velocities on a noncoated inclined surface were compared with that of the water droplets. It was observed that the microstructure of the aerogel affects the droplet as well as marble velocities considerably. For an aerogel with uniform and smaller particles, the water droplet and marble velocities were observed to be maximum, i.e., 144 and 123 cm/s, respectively, whereas for the aerogels with bigger and nonuniform particles, the water droplet and marble velocities were observed to be minimum, i.e., 92 and 82 cm/s, respectively. The results have been discussed by taking into account the contact angles and microstructural observations.     

Graphene-Based Aerogels Possessing Superhydrophilic and Superhydrophobic Properties and Their Application for Electroreduction of Molecular Oxygen

Colloid Journal - A composite aerogel with superhydrophobic external surface has been synthesized from reduced graphene oxide and polytetrafluoroethylene taken in a weight ratio of 1 : 1. The...     

Super water- and oil-repellent surfaces on intrinsically hydrophilic and oleophilic porous silicon films

We demonstrate that porous Si films fabricated by a convenient gold-assisted electroless etching process, which possess a hierarchical porous structure consisting of micrometer-sized asperities superimposed onto a network of nanometer-sized pores, are able to induce a superhydrophobic phenomenon on an intrinsically hydrophilic hydrogen-terminated Si surface and a superoleophobic phenomenon on an intrinsically oleophilic self-assembled monolayer-coated Si surface. Through comparison with porous Si films consisting of vertically aligned straight pores, which are hydrophilic and oleophilic, we show that an overhang structure resulting from the hierarchical porous structure is essential to preventing water and oil from penetrating the texture of the films and inducing the observed macroscopic superhydrophobic and superoleophobic phenomena.     

聚苯硫醚超疏水复合涂层的制备与性能

利用工业原料聚苯硫醚微粉和疏水性二氧化硅纳米粉末,采用喷涂法在瓷砖表面制备了疏水复合涂层.研究了热处理温度、组分配比对涂层表面形貌、粗糙度和接触角的影响,发现随着热处理温度升高,涂层表面粗糙度增大,随着疏水性二氧化硅含量的增加,由于表面聚集的疏水性二氧化硅增多,涂层疏水性增强,在热处理温度为280℃、疏水性二氧化硅与聚苯硫醚质量比为1∶1时,可获得超疏水涂层,涂层的接触角大于150°,滚落角小于4°,pH值为1～14的水溶液在其表面都具有很高的接触角.超疏水涂层具有良好的自清洁效果,并且经落沙法实验测定,超疏水涂层耐刮伤性能良好.     

Nanostructures increase water droplet adhesion on hierarchically rough superhydrophobic surfaces

Hierarchical roughness is known to effectively reduce the liquid-solid contact area and water droplet adhesion on superhydrophobic surfaces, which can be seen for example in the combination of submicrometer and micrometer scale structures on the lotus leaf. The submicrometer scale fine structures, which are often referred to as nanostructures in the literature, have an important role in the phenomenon of superhydrophobicity and low water droplet adhesion. Although the fine structures are generally termed as nanostructures, their actual dimensions are often at the submicrometer scale of hundreds of nanometers. Here we demonstrate that small nanometric structures can have very different effect on surface wetting compared to the large submicrometer scale structures. Hierarchically rough superhydrophobic TiO(2) nanoparticle surfaces generated by the liquid flame spray (LFS) on board and paper substrates revealed that the nanoscale surface structures have the opposite effect on the droplet adhesion compared to the larger submicrometer and micrometer scale structures. Variation in the hierarchical structure of the nanoparticle surfaces contributed to varying droplet adhesion between the high- and low-adhesive superhydrophobic states. Nanoscale structures did not contribute to superhydrophobicity, and there was no evidence of the formation of the liquid-solid-air composite interface around the nanostructures. Therefore, larger submicrometer and micrometer scale structures were needed to decrease the liquid-solid contact area and to cause the superhydrophobicity. Our study suggests that a drastic wetting transition occurs on superhydrophobic surfaces at the nanometre scale; i.e., the transition between the Cassie-Baxter and Wenzel wetting states will occur as the liquid-solid-air composite interface collapses around nanoscale structures. Consequently, water adheres tightly to the surface by penetrating into the nanostructure. The droplet adhesion mechanism presented in this paper gives valuable insight into a phenomenon of simultaneous superhydrophobicity and high water droplet adhesion and contributes to a more detailed comprehension of superhydrophobicity overall.     

Wrinkled Graphene Monoliths as Superabsorbing Building Blocks for Superhydrophobic and Superhydrophilic Surfaces

Superhydrophobic and superhydrophilic surfaces are of great interest because of a large range of applications, for example, as antifogging and self‐cleaning coatings, as antibiofouling paints for boats, in metal refining, and for water–oil separation. An aqueous ink based on three‐dimensional graphene monoliths (Gr) can be used for constructing both superhydrophobic and superhydrophilic surfaces on arbitrary substrates with different surficial structures from the meso‐ to the macroscale. The surface wettability of a Gr‐coated surface mainly depends on which additional layers (air for a superhydrophobic surface and water for a superhydrophilic surface) are adsorbed on the surface of the graphene sheets. Switching a Gr‐coated surface between being superhydrophobic and superhydrophilic can thus be easily achieved by drying and prewetting with ethanol. The Gr‐based superhydrophobic membranes or films should have great potential as efficient separators for fast and gravity‐driven oil–water separation.     

Rapid and Efficient Separation of Oil from Oil‐in‐Water Emulsions Using a Janus Cotton Fabric

A novel bi‐functional Janus cotton fabric is used to separate oil from oil‐in‐water emulsions. This fabric is superhydrophobic on one surface and polyamine‐bearing on the other. When used as a filter, the polyamine‐bearing side causes the micrometer‐sized oil droplets to coalesce. The coalesced oil then fills fabric pores on the superhydrophobic side and selectively permeates it. Oil separation using this method is rapid and the separated oil is pure. Furthermore, the content of the model oil hexadecane (HD) in water after a separation can be reduced to less than 0.03±0.03 vol %. These features demonstrate the practical potential of this technology.     

Floating objects with finite resistance to bending

We consider the equilibrium flotation of a thin, flexible cylinder at the interface between a liquid and a gas. In particular, we determine the maximum load that such a cylinder can support without sinking. We find that as the length of such a cylinder increases the maximum load at first increases. However, the maximum load reaches a plateau when the length of the cylinder is comparable to the elastocapillary length, which is determined by a balance between the bending of the cylinder and surface tension. We then consider the implications of our analysis for the walking on water of both arthropods and man-made robots. In particular, we show that the legs of water striders are typically slightly shorter than this 'optimal' length, suggesting that elastocapillary effects may act as a selection pressure.     

Synthesis of Crosslinked Polymeric Particles and Their Application for the Superhydrophobic Surfaces Using Structured Polymeric Colloids

In this study, structured colloids such as self-organized supraparticles of polymeric lattices were used as coating materials for the fabrication of superhydrophobic surfaces. Crosslinked polystyrene (PS) nanospheres were synthesized using divinylbenzene as crosslinker to prevent the organic particles from being dissolved in toluene solvent. After evaporation-driven self-assembly of PS particles inside the toluene emulsions, supraparticles of PS lattices were fabricated and coated on glass substrate, followed by the plasma treatment using CHF₃ as gas source for fluorination process. After the fluorine treatment using plasma, superhydrophobicity was assessed by measuring water contact angle. The morphologies of supraparticles and the structure of coating film were observed using scanning electron microscope, and the elemental compositions of the coating films were detected by using X-ray photoemission spectroscopy (XPS) technique. We believe that the lotus effect from the supraparticles with different two length scales made crucial contribution to the generation of superhydrophobicity after plasma treatment for the formation of superhydrophobic surfaces.     

Ultra porous nanocellulose aerogels as separation medium for mixtures of oil/water liquids

A novel type of sponge-like material for the separation of mixed oil and water liquids has been prepared by the vapour deposition of hydrophobic silanes on ultra-porous nanocellulose aerogels. To achieve this, a highly porous (>99%) nanocellulose aerogel with high structural flexibility and robustness is first formed by freeze-drying an aqueous dispersion of the nanocellulose. The density, pore size distribution and wetting properties of the aerogel can be tuned by selecting the concentration of the nanocellulose dispersion before freeze-drying. The hydrophobic light- weight aerogels are almost instantly filled with the oil phase when selectively absorbing oil from water, with a capacity to absorb up to 45 times their own weight in oil. The oil can also be drained from the aerogel and the aerogel can then be reused for a second absorption cycle.     

Effects of contact angle hysteresis on ice adhesion and growth on superhydrophobic surfaces under dynamic flow conditions

In this paper, the icephobic properties of superhydrophobic surfaces are investigated under dynamic flow conditions using a closed-loop low-temperature wind tunnel. Superhydrophobic surfaces were prepared by coating aluminum and steel substrate plates with nano-structured hydrophobic particles. The superhydrophobic plates, along with uncoated controls, were exposed to a wind tunnel air flow of 12 m/s and ?7 °C with deviations of ±1 m/s and ±2.5 °C, respectively, containing micrometer-sized (～50 μm in diameter) water droplets. The ice formation and accretion were observed by CCD cameras. Results show that the superhydrophobic coatings significantly delay ice formation and accretion even under the dynamic flow condition of highly energetic impingement of accelerated supercooled water droplets. It is found that there is a time scale for this phenomenon (delay in ice formation) which has a clear correlation with contact angle hysteresis and the length scale of the surface roughness of the superhydrophobic surface samples, being the highest for the plate with the lowest contact angle hysteresis and finest surface roughness. The results suggest that the key for designing icephobic surfaces under the hydrodynamic pressure of impinging droplets is to retain a non-wetting superhydrophobic state with low contact angle hysteresis, rather than to only have a high apparent contact angle (conventionally referred to as a “static” contact angle).     

Surface area and microporosity of carbon aerogels from gas adsorption and small- and wide-angle X-ray scattering measurements

A carbon aerogel was obtained by carbonization of an organic aerogel prepared by sol-gel polymerization of resorcinol and formaldehyde in water. The carbon aerogel was then CO(2) activated at 800 degrees C to increase its surface area and widen its microporosity. Evolution of these parameters was followed by gas adsorption and small- and wide-angle X-ray scattering (SAXS and WAXS, respectively) with contrast variation by using dry and wet (immersion in benzene and m-xylene) samples. For the original carbon aerogel, the surface area, S(SAXS), obtained by SAXS, is larger than that obtained by gas adsorption (S(ads)). The values become nearly the same as the degree of activation of the carbon aerogel increases. This feature is due to the widening of the narrow microporosity in the carbon aerogel as the degree of activation is increased. In addition, WAXS results show that the short-range spatial correlations into the assemblies of hydrocarbon molecules confined inside the micropores are different from those existing in the liquid phase.     

Design and fabrication of micro-textures for inducing a superhydrophobic behavior on hydrophilic materials

Artificial superhydrophobic surfaces are typically fabricated by tuning the surface roughness of intrinsically hydrophobic surfaces. We report here the design and fabrication of micro-textures for inducing a superhydrophobic behavior on hydrogen-terminated Si surfaces with an intrinsic water contact angle of approximately 74 degrees . The micro-textures consist of overhang structures with well-defined geometries fabricated by microfabrication technologies, which provide positions to support the liquid and prevent the liquid from entering into the indents between the micro-textures. As a result, water is in contact with a composite surface of solid and air, which induces the observed macroscopic superhydrophobic behavior.     

Removal of Oil Spills through a Self‐Propelled Smart Device

Oil/water separation through superhydrophobic/superoleophilic materials has attracted considerable interest over the past decades; however, dealing with oil spills on broad waters through an active way remains a challenge. Herein, we report a self‐propelled smart device driven by the decomposition of hydrogen peroxide that can spontaneously move on the water surface and collect floating oil droplets inside with superhydrophobic and superoleophilic properties. Moreover, the self‐propelled smart device exhibits excellent stability and high efficiency for oil/water separation. We believe this study may provide a promising strategy for fabricating smart aquatic devices that have potential applications in water remediation.     

Biomimetic superhydrophobic and highly oleophobic cotton textiles

We report a biomimetic procedure to prepare superhydrophobic cotton textiles. By in situ introducing silica particles to cotton fibers to generate a dual-size surface roughness, followed by hydrophobization with polydimethylsiloxane (PDMS), normally hydrophilic cotton has been easily turned superhydrophobic, which exhibits a static water contact angle of 155 degrees for a 10 microL droplet. The roll-off angle of water droplets depends on the droplet volume, ranging from 7 degrees for a droplet of 50 microL to 20 degrees for a 7 microL droplet. When a perfluoroalkyl chain is introduced to the silica particle surface, the superhydrophobic textile also becomes highly oleophobic, as demonstrated by a static contact angle of 140 degrees and a roll-off angle of 24 degrees for a 15 microL sunflower oil droplet.