Effect of sodium sulfide on Ni-containing carbon monoxide dehydrogenases

The structure of the active-site C-cluster in CO dehydrogenase from Carboxydothermus hydrogenoformans includes a mu(2)-sulfide ion bridged to the Ni and unique Fe, whereas the same cluster in enzymes from Rhodospirillum rubrum (CODH(Rr)) and Moorella thermoacetica (CODH(Mt)) lack this ion. This difference was investigated by exploring the effects of sodium sulfide on activity and spectral properties. Sulfide partially inhibited the CO oxidation activity of CODH(Rr) and generated a lag prior to steady-state. CODH(Mt) was inhibited similarly but without a lag. Adding sulfide to CODH(Mt) in the C(red1) state caused the g(av) = 1.82 EPR signal to decline and new features to appear, including one with g = 1.95, 1.85 and (1.70 or 1.62). Removing sulfide caused the g(av) = 1.82 signal to reappear and activity to recover. Sulfide did not affect the g(av) = 1.86 signal from the C(red2) state. A model was developed in which sulfide binds reversibly to C(red1), inhibiting catalysis. Reducing this adduct causes sulfide to dissociate, C(red2) to develop, and activity to recover. Using this model, apparent K(I) values are 40 +/- 10 nM for CODH(Rr) and 60 +/- 30 microM for CODH(Mt). Effects of sulfide are analogous to those of other anions, including the substrate hydroxyl group, suggesting that these ions also bridge the Ni and unique Fe. This proposed arrangement raises the possibility that CO binding labilizes the bridging hydroxyl and increases its nucleophilic tendency toward attacking Ni-bound carbonyl.     

Carbon monoxide induced decomposition of the active site [Ni-4Fe-5S] cluster of CO dehydrogenase

During the past two years, crystal structures of Cu- and Mo-containing carbon monoxide dehydrogenases (CODHs) and Ni- and Fe-containing CODHs have been reported. The active site of CODHs from anaerobic bacteria (cluster C) is composed of Ni, Fe, and S for which crystallographic studies of the enzymes from Carboxydothermus hydrogenoformans, Rhodospirillum rubrum, and Moorella thermoaceticarevealed structural similarities in the overall protein fold but showed substantial differences in the essential Ni coordination environment. The [Ni-4Fe-5S] cluster C in the fully catalytically competent dithionite-reduced CODH II from C. hydrogenoformans (CODHII(Ch)) at 1.6 A resolution contains a characteristic mu(2)-sulfido ligand between Ni and Fe1, resulting in a square-planar ligand arrangement with four S-ligands at the Ni ion. In contrast, the [Ni-4Fe-4S] clusters C in CO-treated CODH from R. rubrum resolved at 2.8 A and in CO-treated acetyl-CoA synthase/CODH complex from M. thermoacetica at 2.2 and 1.9 A resolution, respectively, do not contain the mu(2)-sulfido ligand between Ni and Fe1 and display dissimilar geometries at the Ni ion. The [Ni-4Fe-4S] cluster is composed of a cubane [Ni-3Fe-4S] cluster linked to a mononuclear Fe site. The described coordination geometries of the Ni ion in the [Ni-4Fe-4S] cluster of R. rubrum and M. thermoacetica deviate from the square-planar ligand geometry in the [Ni-4Fe-5S] cluster C of CODHII(Ch). In addition, the latter was converted into a [Ni-4Fe-4S] cluster under specific conditions. The objective of this study was to elucidate the relationship between the structure of cluster C in CODHII(Ch) and the functionality of the protein. We have determined the CO oxidation activity of CODHII(Ch) under different conditions of crystallization, prepared crystals of the enzyme in the presence of dithiothreitol or dithionite as reducing agents under an atmosphere of N(2) or CO, and solved the corresponding structures at 1.1 to 1.6 A resolutions. Fully active CODHII(Ch) obtained after incubation of the enzyme with dithionite under N(2) revealed the [Ni-4Fe-5S] cluster. Short treatment of the enzyme with CO in the presence of dithiothreitol resulted in a catalytically competent CODHII(Ch) with a CO-reduced [Ni-4Fe-5S] cluster, but a prolonged treatment with CO caused the loss of CO-oxidizing activity and revealed a [Ni-4Fe-4S] cluster, which did not contain a mu(2)-S. These data suggest that the [Ni-4Fe-4S] cluster of CODHII(Ch) is an inactivated decomposition product originating from the [Ni-4Fe-5S] cluster.     

过渡金属团簇M+2(M=Fe、Co、Ni)与CO的化学反应

利用离子讲质谱计和激光溅射技术相结合,研究了Fe2＋、CO2＋、Ni2＋与CO气体的吸附反应,比较了它们的反应活性,给出了化学反应的速率常数及随反应气体压强的变化关系,并从理论上模拟了化学反应过程,测量结果与已有的实验值符合较好．     

Sonochemical synthesis of Ce(1-x)Fe(x)O(2-δ) (0 ≤ x ≤ 0.45) and Ce(0.65)Fe(0.33)Pd(0.02)O(2-δ) nanocrystallites: oxygen storage material, CO oxidation and water gas shift catalyst

Nanocrystalline Ce(1-x)Fe(x)O(2-δ) (0 ≤ x ≤ 0.45) and Ce(0.65)Fe(0.33)Pd(0.02)O(2-δ) of ~4 nm sizes were synthesized by a sonochemical method using diethyletriamine (DETA) as a complexing agent. Compounds were characterized by powder X-ray diffraction (XRD), X-ray photo-electron spectroscopy (XPS) and transmission electron microscopy (TEM). Ce(1-x)Fe(x)O(2-δ) (0 ≤ x ≤ 0.45) and Ce(0.65)Fe(0.33)Pd(0.02)O(2-δ) crystallize in fluorite structure where Fe is in +3, Ce is in +4 and Pd is in +2 oxidation state. Due to substitution of smaller Fe(3+) ion in CeO(2), lattice oxygen is activated and 33% Fe substituted CeO(2)i.e. Ce(0.67)Fe(0.33)O(1.835) reversibly releases 0.31[O] up to 600 °C which is higher or comparable to the oxygen storage capacity of CeO(2)-ZrO(2) based solid solutions (Catal. Today 2002, 74, 225-234). Due to interaction of redox potentials of Pd(2+/0)(0.89 V) and Fe(3+/2+) (0.77 V) with Ce(4+/3+) (1.61 V), Pd ion accelerates the electron transfer from Fe(2+) to Ce(4+) in Ce(0.65)Fe(0.33)Pd(0.02)O(1.815), making it a high oxygen storage material as well as a highly active catalyst for CO oxidation and water gas shift reaction. The activation energy for CO oxidation with Ce(0.65)Fe(0.33)Pd(0.02)O(1.815) is found to be as low as 38 kJ mol(-1). Ce(0.67)Fe(0.33)O(1.835) and Ce(0.65)Fe(0.33)Pd(0.02)O(1.815) have also shown high activity for the water gas shift reaction. CO conversion to CO(2) is 100% H(2) specific with these catalysts and conversion rate was found to be as high 27.2 μmoles g(-1) s(-1) and the activation energy was found to be 46.4 kJ mol(-1) for Ce(0.65)Fe(0.33)Pd(0.02)O(1.815).     

Sulfur ligand substitution at the nickel(II) sites of cubane-type and cubanoid NiFe3S4 clusters relevant to the C-clusters of carbon monoxide dehydrogenase

Substitution reactions at the nickel site of the cubane-type cluster [(Ph3P)NiFe3S4(LS3)]2- (2) have been investigated in the course of a synthetic approach to the C-clusters of CODH. Reaction of 2 with RS- or toluene-3,4-dithiolate affords [(RS)NiFe3S4(LS3)]3- (R = Et (5), H (6)) or [(tdt)NiFe3S4(LS3)]3- (7), demonstrating that anionic sulfur ligands can be bound at the NiII site. Clusters 5 and 6 contain tetrahedral Ni(micro3-S)3(SR) sites. Cluster 7 is of particular interest because it includes a cubanoid NiFe3(micro2-S)(micro3-S)3 core and an approximately planar Ni(tdt)(micro3-S)2 unit. The cubanoid structure is found in all C-clusters, and an NiS4-type unit has been reported in C. hydrogenoformans CODH. Clusters 5/6 are formulated to contain the core [NiFe3S4]1+ identical with Ni2+ (S = 1) + [Fe3S4]1- (S = 5/2) and 7 the core [NiFe3S4]2+ identical with Ni2+ (S = 0) + [Fe3S4]0 (S = 2) on the basis of structure, 57Fe isomer shifts, and 1H NMR isotropic shifts. Also reported are [(EtS)CuFe3S4(LS3)]3- (9) and [Fe4S4(LS3)(tdt)]3- (11). The structures of 5-7, 9, and 11 are presented. Cluster 11, with a five-coordinate Fe(tdt)(micro3-S)3 site, provides a clear structural contrast with 7, which is currently the closest approach to a C-cluster but lacks the exo iron atom found in the NiFe4S4,5 cores of the native clusters. (CODH = carbon monoxide dehydrogenase, LS3 = 1,3,5-tris((4,6-dimethyl-3-mercaptophenyl)thio)-2,4,6-tris(p-tolylthio)benzene(3-), tdt = toluene-3,4-dithiolate).     

DFT investigation of structural, electronic, and catalytic properties of diiron complexes related to the [2Fe](H) subcluster of Fe-only hydrogenases

Hydrogenases catalyze the reversible oxidation of dihydrogen to protons and electrons. The structures of two Fe-only hydrogenases have been recently reported [Peters, J. W.; Lanzilotta, W. N.; Lemon, B. J.; Seefeldt, L. C. Science 1998, 282, 1853-1858. Nicolet, Y.; Piras, C.; Legrand, P.; Hatchikian, E. C.; Fontecilla-Camps, J. C. Structure 1999, 7, 13-23], showing that the likely site of dihydrogen activation is the so-called [2Fe](H) cluster, where each Fe ion is coordinated by CO and CN(-) ligands and the two metals are bridged by a chelating S-X(3)-S ligand. Moreover, the presence of a water molecule coordinated to the distal Fe2 center suggested that the Fe2 atom could be a suitable site for binding and activation of H(2). In this contribution, we report a density functional theory investigation of the structural and electronic properties of complexes derived from the [(CO)(CH(3)S)(CN)Fe(II)(mu-PDT)Fe(II)(CO)(2)(CN)](-1) species, which is related to the [2Fe](H) cluster observed in Fe-only hydrogenases. Our results show that the structure of the [2Fe](H) cluster observed in the enzyme does not correspond to a stable form of the isolated cluster, in the absence of the protein. As a consequence, the reactivity of [(CO)(CH(3)S)(CN)Fe(II)(mu-PDT)Fe(II)(CO)(2)(CN)](-1) derivatives in solution may be expected to be quite different from that of the active site of Fe-only hydrogenases. In fact, the most favorable path for H(2) activation involves the two metal atoms and one of the bridging S atoms and is associated with a very low activation energy (5.3 kcal mol(-1)). The relevance of these observations for the catalytic properties of Fe-only hydrogenases is discussed in light of available experimental and theoretical data.     

EPR and infrared spectroscopic evidence that a kinetically competent paramagnetic intermediate is formed when acetyl-coenzyme A synthase reacts with CO

Carbon monoxide dehydrogenase/acetyl-CoA synthase (CODH/ACS) is a bifunctional enzyme which enables archaea and bacteria to grow autotrophically on CO and hydrogen/carbon dioxide using the Wood-Ljundahl pathway. CO produced from reduction of carbon dioxide by CODH is transferred to the active site of ACS through an intramolecular tunnel, where it combines with Coenzyme A and a methyl cation to produce acetyl-CoA. The active site of ACS contains a single [4Fe-4S] cluster bridged by a cysteine sulfur atom to a binuclear center. The binuclear center is composed of two Ni atoms bridged by two separate cysteine sulfurs. The Ni site attached to the [4Fe-4S] is referred to as proximal Ni, while the other Ni atom, which assumes a square-planar geometry, is referred to as the distal site. We report the characterization of the carbonylated form of highly active (0.67 spins/mol) heterologously expressed monomeric ACS from C. hydrogenoformans in E. coli by rapid-freeze quench EPR (RFQ-EPR) and stopped-flow infrared (SF-IR) spectroscopies. The reaction of ACS with CO produces a single metal-carbonyl species whose formation rate, measured by SF-IR, correlates with the rate of formation, measured by RFQ-EPR, of the paramagnetic state of the enzyme (NiFeC species). These results indicate that the NiFeC species is the predominant form observed in solution when ACS reacts with CO. The NiFeC species contains the proximal Ni in the +1 redox state and the [4Fe-4S] cluster in the 2+ state, thus there is no evidence for either a Ni(0) or a Ni(II) state in the active carbonylated form of the enzyme.     

The A-cluster in subunit beta of the acetyl-CoA decarbonylase/synthase complex from Methanosarcina thermophila: Ni and Fe K-edge XANES and EXAFS analyses

The acetyl-CoA decarbonylase/synthase (ACDS) complex catalyzes the cleavage of acetyl-CoA in methanogens that metabolize acetate to CO(2) and CH(4), and also carries out acetyl-CoA synthesis during growth on one-carbon substrates. The ACDS complex contains five subunits, among which beta possesses an Ni-Fe-S active-site metal cluster, the A-cluster, at which reaction with acetyl-CoA takes place, generating an acetyl-enzyme species poised for C-C bond cleavage. We have used Ni and Fe K fluorescence XANES and EXAFS analyses to characterize these metals in the ACDS beta subunit, expressed as a C-terminally shortened form. Fe XANES and EXAFS confirmed the presence of an [Fe(4)S(4)] cluster, with typical Fe-S and Fe-Fe distances of 2.3 and 2.7 A respectively. An Fe:Ni ratio of approximately 2:1 was found by Kalphabeta fluorescence analysis, indicating 2 Ni per [Fe(4)S(4)]. Ni XANES simulations were consistent with two distinct Ni sites in cluster A, and the observed spectrum could be modeled as the sum of separate square planar and tetrahedral Ni sites. Treatment of the beta subunit with Ti(3+) citrate resulted in shifts to lower energy, implying significant reduction of the [Fe(4)S(4)] center, along with conversion of a smaller fraction of Ni(II) to Ni(I). Reaction with CO in the presence of Ti(3+) citrate generated a unique Ni XANES spectrum, while effects on the Fe-edge were not very different from the reaction with Ti(3+) alone. Ni EXAFS revealed an average Ni coordination of 2.5 S at 2.19 A and 1.5 N/O at 1.89 A. A distinct feature at approximately 2.95 A most likely results from Ni-Ni interaction. The methanogen beta subunit A-cluster is proposed to consist of an [Fe(4)S(4)] cluster bridged to an Ni-Ni center with one Ni in square planar geometry coordinated by 2 S + 2 N and the other approximately tetrahedral with 3 S + 1 N/O ligands. The electronic consequences of two distinct Ni geometries are discussed.     

How the [NiFe4S4] Cluster of CO Dehydrogenase Activates CO2 and NCO−

Ni,Fe‐containing CO dehydrogenases (CODHs) use a [NiFe₄S₄] cluster, termed cluster C, to reversibly reduce CO₂ to CO with high turnover number. Binding to Ni and Fe activates CO₂, but current crystal structures have insufficient resolution to analyze the geometry of bound CO₂ and reveal the extent and nature of its activation. The crystal structures of CODH in complex with CO₂ and the isoelectronic inhibitor NCO^? are reported at true atomic resolution (d_min≤1.1 Å). Like CO₂, NCO^? is a μ₂,η² ligand of the cluster and acts as a mechanism‐based inhibitor. While bound CO₂ has the geometry of a carboxylate group, NCO^? is transformed into a carbamoyl group, thus indicating that both molecules undergo a formal two‐electron reduction after binding and are stabilized by substantial π backbonding. The structures reveal the combination of stable μ₂,η² coordination by Ni and Fe2 with reductive activation as the basis for both the turnover of CO₂ and inhibition by NCO^?.     

Synthetic analogues of the active site of the A-cluster of acetyl coenzyme A synthase/CO dehydrogenase: syntheses, structures, and reactions with CO

Two metallosynthons, namely (Et4N)2[Ni(NpPepS)] (1) and (Et4N)2[Ni(PhPepS)] (2) containing carboxamido-N and thiolato-S as donors have been used to model the bimetallic M(p)-Ni(d) subsite of the A-cluster of the enzyme acetyl coenzyme A synthase/CO dehydrogenase. A series of sulfur-bridged Ni/Cu dinuclear and trinuclear complexes (3-10) have been synthesized to explore their redox properties and affinity of the metal centers toward CO. The structures of (Et4N)2[Ni(PhPepS)] (2), (Et4N)[Cu(neo)Ni(NpPepS)] x 0.5 Et2O x 0.5 H2O (3 x 0.5 Et2O x 0.5 H2O), (Et4N)[Cu(neo)Ni(PhPepS)] x H2O (4 x H2O), (Et4N)2[Ni{Ni(NpPepS)}2] x DMF (5 x DMF), (Et4N)2[Ni(DMF)2{Ni(NpPepS)}2] x 3 DMF (6 x 3 DMF), (Et4N)2[Ni(DMF)2{Ni(PhPepS)}2] (8), and [Ni(dppe)Ni(PhPepS)] x CH2Cl2 (10 x CH2Cl2) have been determined by crystallography. The Ni(d) mimics 1 and 2 resist reduction and exhibit no affinity toward CO. In contrast, the sulfur-bridged Ni center (designated Ni(C)) in the trinuclear models 5-8 are amenable to reduction and binds CO in the Ni(I) state. Also, the sulfur-bridged Ni(C) center can be removed from the trimers (5-8) by treatment with 1,10-phenanthroline much like the "labile Ni" from the enzyme. The dinuclear Ni-Ni models 9 and 10 resemble the Ni(p)-Ni(d) subsite of the A-cluster more closely, and only the modeled Ni(p) site of the dimers can be reduced. The Ni(I)-Ni(II) species display EPR spectra typical of a Ni(I) center in distorted trigonal bipyramidal and distorted tetrahedral geometries for 9(red) and 10(red), respectively. Both species bind CO, and the CO-adducts 9(red)-CO and 10(red)-CO display strong nu(co) at 2044 and 1997 cm(-1), respectively. The reduction of 10 is reversible. The CO-affinity of 10 in the reduced state and the nu(co) value of 10(red)-CO closely resemble the CO-bound reduced A-cluster (nu(co) = 1996 cm(-1)).     

Microwave-assisted solvothermal synthesis and characterization of metastable LiFe(1-x)(VO)(x)PO4 cathodes

Vanadyl ion substituted LiFePO(4) cathodes of the form LiFe(1-x)(VO)(x)PO(4) for 0 ≤ x ≤ 0.25 have been synthesized by a rapid microwave-solvothermal process at <300 °C within 10 min. Clear evidence of vanadyl ion substitution is demonstrated, despite a large size difference between Fe(2+) and (VO)(2+), by characterizing the products structurally, spectroscopically, and electrochemically. The vanadyl ion substitution is accompanied by the formation of iron vacancies in the lattice and Fe(3)O(4) impurity phase, which increases with increasing (VO)(2+) substitution for Fe(2+) and could be removed with a magnetic stir bar. The formation of iron vacancies, along with the oxidation of some Fe(2+) to Fe(3+) to maintain charge neutrality, results in a decrease in the unit cell volume with increasing x despite the substitution of larger (VO)(2+) for Fe(2+). Charge-discharge data of the vanadyl ion substituted samples suggest suppression of the two-phase plateau behavior that is characteristic of LiFePO(4). Electrochemical data collected without any carbon coating reveal that the capacity and rate capability decreases, but the capacity retention improves with (VO)(2+) substitution.     

Pd2+/Pd0 redox cycling in hexagonal YMn(0.5)Fe(0.5)O3: implications for catalysis by PGM-substituted complex oxides

Complex oxides--containing at least two different cations on crystallographically distinct sites--have recently been shown to display redox cycling of platinum group metals (PGMs), such as Pd; for example, Pd-substituted complex oxides can reversibly extrude metallic Pd under reducing conditions and then reincorporate Pd(2+) ions into the lattice under oxidizing conditions. The title compounds, YMn(0.5)Fe(0.5-x)Pd(x)O(3-δ) (0 ≤ x ≤ 0.07) crystallizing in the noncentrosymmetric YMnO(3) structure, were prepared using a sol-gel process at 800 °C, and the structures were refined from high-resolution synchrotron X-ray powder diffraction data. Their redox cycling behavior was monitored using synchrotron X-ray diffraction and EXAFS studies. In contrast to the previously studied complex oxide host compounds, YMn(0.5)Fe(0.5-x)Pd(x)O(3-δ) is only modestly tolerant to cycling: repeated redox cycling leads to the formation of PdO, which, on the time-scale of the oxidation cycles, does not reincorporate in the complex oxide lattice. Both oxidized and reduced samples were tested for the oxidation of CO to CO(2) under CO-lean conditions. YMn(0.5)Fe(0.5-x)Pd(x)O(3-δ) performs essentially as well as previously studied YFe(1-x)Pd(x)O(3-δ). The CO oxidation light-off characteristics of the hexagonal hosts are very similar to finely dispersed PdO. Despite evidence that Pd is almost fully dispersed as divalent ions in the host lattice, which is presumably accompanied by the concurrent creation of oxygen vacancies (2 Pd(2+):1 V(O(2-))), the as-prepared hexagonal materials do not display any significant improvement in catalytic activity as a function of Pd substitution level. This suggests that the corner-connected trigonal bipyramids that characterize this structural family do not enable the transport of oxygen through the bulk of the lattice. The study casts light on factors in the solid-state chemistry of precious metal-substituted complex oxides that influence the efficacy of redox cycling of the precious metal, and catalytic performance.     

Stopped-Flow Kinetics of Methyl Group Transfer between the Corrinoid-Iron-Sulfur Protein and Acetyl-Coenzyme A Synthase from Clostridium thermoaceticum

Kinetics of methyl group transfer between the Ni-Fe-S-containing acetyl-CoA synthase (ACS) and the corrinoid protein (CoFeSP) from Clostridium thermoaceticum were investigated using the stopped-flow method at 390 nm. Rates of the reaction CH(3)-Co(3+)FeSP + ACS(red) <==> Co(1+)FeSP + CH(3)-ACS(ox) in both forward and reverse directions were determined using various protein and reductant concentrations. Ti(3+)citrate, dithionite, and CO were used to reductively activate ACS (forming ACS(red)). The simplest mechanism that adequately fit the data involved formation of a [CH(3)-Co(3+)FeSP]:[ACS(red)] complex, methyl group transfer (forming [Co(1+)FeSP]:[CH(3)-ACS(ox)]), product dissociation (forming Co(1+)FeSP + CH(3)-ACS(ox)), and CO binding yielding a nonproductive enzyme state (ACS(red) + CO <==> ACS(red)-CO). Best-fit rate constants were obtained. CO inhibited methyl group transfer by binding ACS(red) in accordance with K(D) = 180 +/- 90 microM. Fits were unimproved when >1 CO was assumed to bind. Ti(3+)citrate and dithionite inhibited the reverse methyl group transfer reaction, probably by reducing the D-site of CH(3)-ACS(ox). This redox site is oxidized by 2e(-) when the methyl cation is transferred from CH(3)-Co(3+)FeSP to ACS(red), and is reduced during the reverse reaction. Best-fit K(D) values for pre- and post-methyl-transfer complexes were 0.12 +/- 0.06 and 0.3 +/- 0.2 microM, respectively. Intracomplex methyl group transfer was reversible with K(eq) = 2.3 +/- 0.9 (k(f)/k(r) = 6.9 s(-1)/3.0 s(-1)). The nucleophilicity of the [Ni(2+)D(red)] unit appears comparable to that of Co(1+) cobalamins. Reduction of the D-site may cause the Ni(2+) of the A-cluster to behave like the Ni of an organometallic Ni(0) complex.     

Investigation on C2-ceramide complexes with transition metal ions using electrospray ionization tandem mass spectrometry

Electrospray ionization-tandem mass spectrometry (ESI-MS/MS) is applied for the investigation of C(2)-ceramide complexes with transition metal ions. Ceramide plays an important role in the regulation of various signaling pathways leading to proliferation, differentiation or apoptotic cell death. The formation and fragmentation of doubly charged cluster ions as well as singly charged cluster ions of C(2)-ceramide with transition metal ions (Mn(2+), Fe(2+), Co(2+) and Ni(2+)) are studied by ESI-MS/MS in the positive mode. Tube lens offset voltage and concentrations of C(2)-ceramide and transition metals are optimized to determine the best conditions for generating doubly charged cluster ions. The fragmentation pathways of metal ion complexes with C(2)-ceramide and the compositions of these complexes are determined by collision induced dissociation (CID). All transition metal ions (Mn(2+), Fe(2+), Co(2+) and Ni(2+) except Cu(2+)) shows similar complexation with C(2) ceramide. The unique complexation behavior of copper(II) is responsible for the different geometry of the complexes and relatively lower affinity of ceramide to copper(II) than those to other transition metals.     

Structural models of the bimetallic subunit at the A-cluster of acetyl coenzyme a synthase/CO dehydrogenase: binuclear sulfur-bridged Ni-Cu and Ni-Ni complexes and their reactions with CO

The Ni(II)-dicarboxamido-dithiolato complexes (Et4N)2[Ni(NpPepS)] (1) and (Et4N)2[Ni(PhPepS)] (2) were used as Nid metallosynthons in the construction of higher nuclearity dinuclear Ni-Cu and Ni-Ni species to model the bimetallic Mp-Nid site of the A-cluster of acetyl coenzyme A synthase/CO dehydrogenase (ACS/CODH). Reaction of 1 with [Cu(neo)Cl] and [Ni(terpy)Cl2] in MeCN affords the dinuclear complexes (Et4N)[Cu(neo)Ni(NpPepS)] (3) and [Ni(terpy)Ni(NpPepS)] (4), respectively. Reaction of 2 with [Ni(dppe)Cl2] in MeCN yields [Ni(dppe)Ni(PhPepS)] (6). The Ni-Cu complex 3 exhibits no redox chemistry at the Nid site and no reaction with CO. In contrast, the Nip sites in 4 and 6 are readily reduced (characterized by their Ni(I) EPR spectra) and bind CO, exhibiting nuco bands at 2044 and 1997 cm-1, respectively, indicating terminal CO binding. The present Ni-Ni systems replicate the structural and chemical properties of the A-cluster site in ACS/CODH and support the presence of Ni at Mp in the catalytically active enzyme.     

A charge-transfer-induced spin transition in a discrete complex: the role of extrinsic factors in stabilizing three electronic isomeric forms of a cyanide-bridged co/fe cluster

A series of bimetallic, trigonal bipyramidal clusters of type {[Co(N-N)(2)](3)[Fe(CN)(6)](2)} are reported. The reaction of {Co(tmphen)(2)}(2+) with [Fe(CN)(6)](3)(-) in MeCN affords {[Co(tmphen)(2)](3)[Fe(CN)(6)](2)} (1). The cluster can exist in three different solid-state phases: a red crystalline phase, a blue solid phase obtained by exposure of the red crystals to moisture, and a red solid phase obtained by desolvation of the blue solid phase in vacuo. The properties of cluster 1 are extremely sensitive to both temperature and solvent content in each of these phases. Variable-temperature X-ray crystallography; (57)Fe Mossbauer, vibrational, and optical spectroscopies; and magnetochemical studies were used to study the three phases of 1 and related compounds, Na{[Co(tmphen)(2)](3)[Fe(CN)(6)](2)}(ClO(4))(2) (2), {[Co(bpy)(2)](3)[Fe(CN)(6)](2)}[Fe(CN)(6)](1/3) (3), and {[Ni(tmphen)(2)](3)[Fe(CN)(6)](2)} (4). The combined structural and spectroscopic investigation of 1-4 leads to the unambiguous conclusion that 1 can exist in different electronic isomeric forms, {Co(III)(2)Co(II)Fe(II)(2)} (1A), {Co(III)Co(II)(2)Fe(III)Fe(II)} (1B), and {Co(II)(3)Fe(III)(2)} (1C), and that it can undergo a charge-transfer-induced spin transition (CTIST). This is the first time that such a phenomenon has been observed for a Co/Fe molecule.     

Capture of Ni(II), Cu(I) and Z(II) by thiolate sulfurs of an N2S2Ni complex: a role for a metallothiolate ligand in the acetyl-coenzyme A synthase active site

The metal binding affinity of an (N2S2)Ni bridging metallothiolate ligand (Zn2+ < Ni2+ < Cu+) gives precedent for the observed heterogeneity in ACS/CODH.     

Synthesis and Characterization of a Series of Triethylphosphine-Ligated Pt-Au Cluster Compounds. X-ray Crystal and Molecular Structure of [Pt(AuPEt(3))(9)](NO(3))(3)

The first triethylphosphine-stabilized Pt-Au cluster compounds, [Pt(AuPEt(3))(10)](2+) (2) and [Pt(AuPEt(3))(9)](3+) (3), were prepared by the direct reaction of Pt(PEt(3))(3) with AuPEt(3)NO(3) under a dihydrogen atmosphere. Cluster 2 is the highest-nuclearity homoleptic Pt(AuPR(3))(n)() cluster yet prepared. The reactivity and structures of these clusters are in agreement with the well-established electron-counting arguments. The 18-electron cluster 2 was converted into the 16-electron cluster 3 by oxidation with 2 equiv of ferricinium ion [Fe(eta(5)-C(5)H(5))(2)](+). Cluster 3 was converted into 2 by reduction with H(2) in the presence of [AuPEt(3)](+). Cluster 3 was also observed to cleanly add the 2-electron donors CO and PEt(3) to form the 18-electron clusters [(CO)Pt(AuPEt(3))(9)](3+) (4) and [(PEt(3))Pt(AuPEt(3))(9)](3+) (5), respectively. Single-crystal X-ray diffraction results show that 3 has a flattened, toroidal structure in which the PtAu(9) framework has a Pt-centered, tricapped trigonal prismatic geometry. Crystal data for [Pt(AuPEt(3))(9)](NO(3))(3) is as follows: hexagonal P6(3)/m, a = 15.134(5) ?, c = 23.48(1) ?, V = 4657 ?(3), Z = 2, residuals R = 0.056, and R(w)() = 0.053 for 1489 observed reflections and 81 variables, Mo Kalpha radiation. Compound 3 was found to reversibly add H(2) in solution to form the dihydride cluster [(H)(2)Pt(AuPEt(3))(9)](3+) (6). The equilibrium constant for this addition reaction is 1.1 x 10(3) M(-)(1) (CD(2)Cl(2) solution, 25 degrees C), slightly smaller than that for [Pt(AuPPh(3))(8)](2+). The rate of the addition is also slower than that with [Pt(AuPPh(3))(8)](2+). Cluster 3 is an excellent homogeneous catalyst for H(2)-D(2) equilibration giving a turnover rate for HD production of 0.13 s(-)(1) (nitrobenzene solvent, 30 degrees C, 1 atm). The PEt(3)-containing clusters give similar rates and follow the same general trends previously observed with PPh(3)-ligated clusters. The chemistry of these new clusters is explained by consideration of the steric and electronic properties of the PEt(3) ligand. These new compounds will be useful as models for hydrogen activation by Pt-Au clusters and as precursors for supported Pt-Au catalysts.     

Extent and mechanism of metal ion incorporation into precipitated ferrites

The ability of many noniron metals to be incorporated into the structure of ferrites is being utilized in numerous industrial and environmental applications. The incorporation of some of these metals during Fe(II) oxidation-induced precipitation at moderate temperatures (80-100°C) appears to be limited, for reasons not fully understood, and to extents not always agreed (e.g., Ni(2+), Cr(3+)). In this paper, the incorporation maxima of six metals into the structure of precipitated ferrites (in terms of x in Me(x)Fe(3-)(x)O(4), Me represents a noniron metal) were concluded to be 1.0, 1.0, 0.78, 0.49, 0.35, and 0.0 for Zn(2+), Co(2+), Ni(2+), Al(3+), Cd(2+) and Cr(3+), respectively. With the exception of the much larger Cd(2+), these values were associated with kinetic considerations controlled by the H(2)O exchange rate between the hydration shells surrounding the dissolved metal ion.     

Performance and characterization of iron-nickel catalysts for light olefin production

A series of x (Fe, Ni)/Al2O3 catalysts (x = 2--12 wt%) were prepared using incipient wetness method and studied for the conversion of synthesis gas to light olefins. 6 wt%(Fe, Ni)/Al2O3 catalyst was found to be the optimal catalyst for the production of C2--C4 olefins. The effects of calcination behaviors and operational conditions on the catalytic performance of the optimal catalyst were investigated. The best operational conditions were molar feed ratio H2/CO = 2/1, T = 260 ℃, gas hourly space velocity (GHSV) = 2600 h-1 and the pressure of 3 bar. Characterizations of both precursors and catalysts were carried out using X-ray diffraction (XRD), temperature-programmed reduction (TPR), scanning electron microscopy (SEM), N2-adsorption-desorption measurement, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC).