Headspace solid-phase microextraction combined with GC×GC-TOFMS for the analysis of volatile compounds of Coptis species rhizomes

In this study, the investigation of the volatile compounds of dried rhizomes of Coptis chinensis Franch, C. deltoidea C. Y. Cheng et Hsiao, and C. teeta Wall was carried out to complete the chemical composition of these valuable natural products. Volatile profiles were established and compared after headspace solid-phase microextraction (HS-SPME) using a polydimethylsiloxane/divinylbenzene (PDMS/DVB, 65 μm) fibre coupled to comprehensive 2D gas chromatography time-of-flight mass spectrometry (GC×GC-TOFMS). Analyses were performed and compared on two column-phase combinations (non-polar/polar and polar/non-polar). The majority of the identified compounds eluted as well-separated (pure) components as a result of high-resolution capability of the GC×GC method, which significantly reduces co-elution. Therefore, this increases the likelihood that pure mass spectra can be obtained. More than 290 volatile and semi-volatile organic compounds were tentatively characterized by means of GC×GC in tandem with TOFMS detection. Improved result interpretations were obtained in terms of compound classification based on the organized structure of the peaks of structurally related compounds in the GC×GC contour plot. These compounds are distributed over the chemical groups of hydrocarbons, acids, alkenes, alkynes, aldehydes, ketones, alcohols, esters, furans, and terpenoids. Among all the chemical groups, terpenoids present the higher number of identified compounds (44), alkenes (41), and aldehydes and ketones (28). This study completed the volatile phytochemical analysis of the headspace composition of various Coptis species rhizomes, and should serve as a means to identify the difference between the rhizomes and may also be useful to confirm individual species based on their volatile chemical profile.     

Comparison of GC–MS and LC–MS methods for the analysis of antioxidant phenolic acids in herbs

Two methods were developed for the quantitative analysis of phenolic acids in herb extracts. The methods were based on liquid chromatography–time-of-flight mass spectrometry (LC–TOFMS) and gas chromatography–mass spectrometry (GC–MS). The methods were compared in terms of their linearity, repeatability, selectivity, sensitivity and the speed of the analysis. The sensitivity was good for both methods, with limits of detection of <80 ng/ml for most of the compounds. The relative standard deviations (RSD) of the peak areas were on average 7.2% for the LC–TOFMS method and 1.4% for the GC–MS method. Both methods were found to be suitable for the determination of the target analytes, although GC–MS was better suited to the quantitative determination of compounds present at low concentrations.     

The Application of TD/GC/NICI–MS with an Al2O3-PLOT-S Column for the Determination of Perfluoroalkylcycloalkanes in the Atmosphere

A modified method for the quantitative determination of atmospheric perfluoroalkylcycloalkanes (PFCs) using thermal desorption coupled with gas chromatography and detection by negative ion chemical ionization–mass spectrometry was developed. Using an optimized analytical system, a commercially available Al₂O₃ porous layer open tubular (PLOT) capillary column (30 m × 0.25 mm) deactivated with Na₂SO₄ was used for separation of PFCs. Improvements in the separation of PFCs, the corresponding identification and the limit of detection of PFCs using this method and column are presented. The method was successfully applied to determine the atmospheric background concentrations of a range of PFCs from a number of samples collected at a rural site in Germany. The results of this study suggest that the method outlined using the Al₂O₃-PLOT-S capillary column has good sensitivity and selectivity, and that it can be deployed in a routine laboratory process for the analysis of PFCs in the future research work. In addition, the ability of this column to separate the isomers of one of the lower boiling PFCs (perfluorodimethylcyclobutane) and its ability to resolve perfluoroethylcyclohexane offer the opportunity for single-column analysis for multiple PFCs.     

Use of electrophoretic techniques and MALDI–TOF MS for rapid and reliable characterization of bacteria: analysis of intact cells, cell lysates, and “washed pellets”

In this study electrophoretic and mass spectrometric analysis of three types of bacterial sample (intact cells, cell lysates, and “washed pellets”) were used to develop an effective procedure for the characterization of bacteria. The samples were prepared from specific bacterial strains. Five strains representing different species of the family Rhizobiaceae were selected as model microorganisms: Rhizobium leguminosarum bv. trifolii, R. leguminosarum bv. viciae, R. galegae, R. loti, and Sinorhizobium meliloti. Samples of bacteria were subjected to analysis by four techniques: capillary zone electrophoresis (CZE), capillary isoelectric focusing (CIEF), gel IEF, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI–TOF MS). These methods are potential alternatives to DNA-based methods for rapid and reliable characterization of bacteria. Capillary electrophoretic (CZE and CIEF) analysis of intact cells was suitable for characterization of different bacterial species. CIEF fingerprints of “washed pellets” and gel IEF of cell lysates helped to distinguish between closely related bacterial species that were not sufficiently differentiated by capillary electrophoretic analysis of intact cells. MALDI–TOF MS of “washed pellets” enabled more reliable characterization of bacteria than analysis of intact cells or cell lysates. Electrophoretic techniques and MALDI–TOF MS can both be successfully used to complement standard methods for rapid characterization of bacteria.     

Using GC × GC-FID profiles to estimate the age of weathered gasoline samples

Predicting the amount of time that a petroleum mixture has been exposed to weathering effects has applications in areas of environmental and other forensic investigations, such as aiding in determining the cause and intent of a fire. Historically, research on the evaporation rates of hydrocarbon mixtures has focused on forensic oil spill identification and predicting if a fresh sample could be weathered to give an observed composition in an aged sample. Relatively little attention has focused on approaching the problem from the other direction: estimating exposure time based on the observed composition of a weathered sample at a given time and assuming a prior composition. Here, we build upon our previous research into the weathering of model mixtures by extending our work to gasoline. Samples of gasoline with varying octane ratings and from several vendors were weathered under controlled conditions and their composition monitored over time by two-dimensional gas chromatography (GC × GC). A variety of chemometric models were explored, including partial least squares (PLS), nonlinear PLS (PolyPLS) and locally weighted regression (LWR). A hierarchical application of multivariate techniques was able to predict the time for which a sample had been exposed to evaporative weathering. Partial least squares discriminant analysis could predict whether a sample was relatively fresh (<12 h exposure time) or highly weathered (>20 h exposure time). Subsequent regression models for these classes were evaluated for accuracy using the root mean square error of prediction. LWR was the most successful, whereby fresh and highly weathered samples were predicted to within 30 min and 5 h of exposure, respectively.     

Application of TA–MS combined with PulseTA for characterization of materials

The thermal behavior of the anticancer drug-irinotecan was measured by Thermogravimetry–Differential thermal analysis (TG–DTA) to explore the application of TG–DTA in nanomedicine firstly. The TG–DTA result showed that the irinotecan was oxidized completely before 700 °C. When irinotecan was loaded onto nanosized mesoporous silica spheres, the loading capacity for irinotecan measured by TG–DTA was about 9.11% in the irinotecan/mesoporous SiO₂ composite, similar to the typical UV–Vis spectra results (10.5%), which showed that TG–DTA characterization provided an alternative method to determine the drug loading amount on inorganic carriers. Secondly, Thermogravimetry–Differential scanning calorimetry–Mass Spectrometry coupling techniques (TG–DSC–MS) were used to characterize the hydrogen adsorption temperature and capacity of TiCr_1.2 (V-Fe)_0.6 alloy. The MS result showed that the released region of hydrogen was 250–500 °C, which was consistent with the TG–DSC results. Lastly, TA–MS combined with pulse thermal analysis (PulseTA) were used for a simultaneous characterizing study in the changes of mass, determination and quantitative calibration of the evolved nitrogen formed during the thermal decomposition of the InN powder. The results showed that relative error of this method between measured value and theoretical value was 2.67% for the quantitative calibration of evolved N₂. It shows that TA–MS combined with PulseTA techniques offer a good tool for the quantification of the evolved nitrogen in the InN powder.     

GC–MS Combined with Chemometrics for Analysis of the Components of the Essential Oils of Sweet Potato Leaves

Essential oils from the leaves of two cultivars of sweet potato have been investigated by gas chromatography–mass spectrometry with the help of two chemometric resolution methods, heuristic evolving latent projections and selective ion analysis, and use of temperature-programmed retention indices. The overall volume integration technique was used for quantitative analysis. Eighty-four and forty-five components, accounting for 89.39 and 98.08% of the oils, were tentatively identified in the two cultivars. Thirty-four components were identical in both cultivars. Major constituents of Shuiguo were germacrene D (21.83%), germacrene B (15.17%), caryophyllene (12.44%), and n-hexadecanoic acid (11.24%). Caryophyllene (28.73%), γ-muurolene (13.07%), and β-caryophyllene epoxide (9.04%) were the major components of Xiangshu-17. These results indicate the method is suitable for analysis of the two-dimensional data obtained from essential oils.     

Combined use of ESI–QqTOF-MS and ESI–QqTOF-MS/MS with mass-spectral library search for qualitative analysis of drugs

The potential of the combined use of ESI–QqTOF-MS and ESI–QqTOF-MS/MS with mass-spectral library search for the identification of therapeutic and illicit drugs has been evaluated. Reserpine was used for standardizing experimental conditions and for characterization of the performance of the applied mass spectrometric system. Experiments revealed that because of the mass accuracy, the stability of calibration, and the reproducibility of fragmentation, the QqTOF mass spectrometer is an appropriate platform for establishment of a tandem-mass-spectral library. Three-hundred and nineteen substances were used as reference samples to build the spectral library. For each reference compound, product-ion spectra were acquired at ten different collision-energy values between 5 eV and 50 eV. For identification of unknown compounds, a library search algorithm was developed. The closeness of matching between a measured product-ion spectrum and a spectrum stored in the library was characterized by a value called “match probability”, which took into account the number of matched fragment ions, the number of fragment ions observed in the two spectra, and the sum of the intensity differences calculated for matching fragments. A large value for the match probability indicated a close match between the measured and the reference spectrum. A unique feature of the library search algorithm—an implemented spectral purification option—enables characterization of multi-contributor fragment-ion spectra. With the aid of this software feature, substances comprising only 1.0% of the total amount of binary mixtures were unequivocally assigned, in addition to the isobaric main contributors. The spectral library was successfully applied to the characterization of 39 forensic casework samples. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible to authorized users.     

Application of off-line pyrolysis with dynamic solid-phase microextraction to the GC–MS analysis of biomass pyrolysis products

Pyrolysis coupled with dynamic solid-phase micro extraction (Py-SPME) followed by GC–MS analysis was applied to the determination of volatile compounds evolved by a micro-scale off-line pyrolysis apparatus, in order to extend the information affordable with this type of analytical equipment. The Py-SPME method with a carboxen/PDMS fiber working in the retracted mode was tested on four biomass samples (switchgrass, sweet sorghum, corn stalk and poplar) for qualitative analysis of semi-volatile pyrolysis products and quantitative determination of main volatiles (C₁–C₄) pyrolysis products. The developed procedure allowed capturing and analysis of all GC analyzable compounds, without memory effects and with good peak resolution also for early GC-eluting compounds. Twelve main volatile pyrolysis products, including hydroxyacetaldehyde and acetic acid, were successfully quantified; in spite of the intrinsic variability introduced by dynamic SPME sampling, results were relatively accurate and consistent with literature data on bench pyrolysis reactors.     

A Novel Derivatization Method Coupled with GC–MS for the Simultaneous Determination of Chloropropanols

A sensitive and rapid derivatization method for the simultaneous determination of chloropropanols [1,3-dichloropropan-2-ol (1,3-DCP), 2,3-dichloropropan-1-ol (2,3-DCP) and 3-chloropropane-1,2-diol (3-MCPD)] has been developed. The three chloropropanols were silylated with 1-trimethylsilylimidazole and then determined by GC–MS. n-Undecane was used as the internal standard. The limits of detection (LOD) were 0.20, 0.10, 0.14 μg kg^?1 for 1,3-DCP, 2,3-DCP and 3-MCPD, respectively. The three compounds behaved >0.999 of linearity and satisfactory precision with the relative standard deviation (RSD) <10%. The excellent validation data suggested that this method was more effective than heptafluorobutyrylimidazole derivatization, and 1-trimethylsilylimidazole was considered as a promising silylating reagent to be widely applied to measurements of chloropropanols in real samples.     

Pyrolysis–GC/MS for the identification of macromolecular components in historical recipes

Analytical pyrolysis with thermally assisted hydrolysis and methylation was employed to investigate ancient ointments collected from Spanish vessels coming from the sixteenth century pharmacies. The ointments were reproduced on the basis of historical recipes and characterization was made in comparison with real samples. Characteristic markers indicate the presence of beeswax, of animal and plant lipids, and of natural resins. Analyses of old samples are consistent with the modern reproductions and with the analysis of raw materials. Multivariate data analysis was used to discriminate between the different types of lipidic materials, also in connection with their relative amount in the samples.     

Contribution of microextraction in packed sorbent for the analysis of cotinine in human urine by GC–MS

A simple, rapid, sensitive, and non-consuming solvent method for the determination of cotinine in urine was developed, based on sample preparation by the relatively new technique microextraction in packed sorbent (MEPS) and analysis by GC–MS. This optimized method was compared with conventional solid-phase extraction/liquid–liquid extraction method used as reference. The wide linear range (5–5,000 ng/mL) and high sensitivity of the MEPS method (limit of detection 0.8 ng/mL) allow application to analysis of urine from smokers as well as non-smokers susceptible to passive smoking.     

Matrix Solid-Phase Dispersion Combined with GC–MS/MS for the Determination of Organochlorine Pesticides and Polychlorinated Biphenyls in Marketed Seafood

An analysis method based on matrix solid-phase dispersion (MSPD) and gas chromatography tandem mass spectrometry was developed and applied for the analysis for organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) in the marketed seafood such as fish, shrimp and shellfish. The parameters of the method including the type and amount of the absorbent, as well as the type and volume of the elution solution were optimized. The recoveries were between 70 and 120% with RSDs less than 20%, and the LODs and LOQs were 0.011–0.046 and 0.037–0.153 ng g^?1 under optimized conditions. The results showed that most of the OCPs and PCBs were detectable in the marketed samples with the average concentration range of 0.722–14.206 and 0.034–1.184 ng g^?1, respectively. Among the 21 OCPs detected, DDTs had a relatively higher concentration level. And in the PCBs, the concentration of PCB28 was over 45% of the total PCBs determined in all the samples. The developed method was simple, fast and effective, and could successfully be applied for trace amount of OCPs and PCBs determination in seafood matrixes.     

Complementary use of GCxGC–TOF–MS and statistics for differentiation of variety in biosolid samples

Formation of biosolid cakes, which are one of the main wastes generated in wastewater treatment plants, is connected with emission of many hazardous chemical compounds, including odoriferous ones. To optimize particular processes of biosolid cake processing, it is necessary to assess chemical composition of the gas mixtures containing the compounds released from the cakes. The paper proposes application of two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GCxGC–TOF–MS) to identification of the compounds released from four main types of biosolid cakes and to quantitative determination of the markers characteristic for particular types of cake. Based on the analysis of variance, the following compounds, which could be potential markers of the investigated biosolid cakes, were selected: 1-propanol, 2-hexanone, toluene, o-xylene, p-xylene, and organosulfur compounds (methanethiol, ethanethiol, dimethyl sulfide, dimethyl disulfide, and diethyl disulfide). Theoretical odour concentrations of four investigated types of biosolid cakes were determined, based on measured concentrations and olfactory thresholds of the aforementioned compounds. The highest concentration was revealed for a primary cake (634 ou/m³), whereas the lowest concentration was found for an excess cake (136 ou/m³) (ou/m³—odour unit per m³; one odour unit is equivalent to collective odour threshold of odorants mixture present in 1 m³). The proposed methodology allows preliminary evaluation of the odour nuisance markers connected with formation of the biosolid cakes, without a need for quantitative analysis of all determined compounds.

Graphical abstract

Open image in new window

     

Combination of chemical and electron-impact ionisation with GC×GC–qMS for characterization of fatty alcohol alkoxylate polymers in the low-molecular-weight range up to 700 Da

The class of fatty alcohol alkoxylates describes surfactants that are synthesised by reaction of fatty alcohols with alkoxides such as ethylene oxide or propylene oxide or a combination of both as copolymers. Such alkoxylates are used, for example, as nonionic surfactants in home and industrial cleaning and washing agents. Chemical characteristics of such alkoxylate copolymers, for example the degree of alkoxylation, the arrangement of building blocks (random or block polymerisation), the type of the starter, and endcapping, play an important role in application behaviour. The analysis of these characteristics is challenging because in many cases such copolymers have high polydispersity and a large number of constitutional isomers depending on the degree of alkoxylation. Furthermore, the alkoxylates often occur in a complex multicomponent matrix. Here we present a method for characterization of silylated fatty alcohol alkoxylates in the low-molecular-weight range by means of comprehensive two-dimensional gas chromatography–mass spectrometry with electron impact and chemical ionisation. This method also enables detailed analysis of the alkoxylates in a complex matrix such as modern detergents.     

MALDI-ToF mass spectrometry–multivariate data analysis as a tool for classification of reactivation and non-culturable states of bacteria

Some bacterial life states are only difficult to describe and to detect because they are on the border of active metabolism. A prominent example is the so-called viable but non-culturable state, which is mainly characterized by the inability of bacteria to grow on synthetic media. Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-ToF/MS) in combination with multivariate data analysis represents a powerful tool for mass-spectrometric pattern recognition of biological samples. This method is already used for differentiation of bacterial strains. In this study we present a rapid readout method based on MALDI-ToF/MS in combination with principal component analysis to classify the bacterial non-culturable state using Enterococcus faecalis as a model organism. By applying this technique to samples of different physiological states, distinct clusters were calculated and all mass spectra were classified correctly into groups of similar type concerning their physiological state.     

Development and validation of volumetric absorptive microsampling coupled with UHPLC–MS/MS for the analysis of gamma-hydroxybutyric acid in human blood

A volumetric microsampling (VAMS) device (20 μl) was evaluated and validated for the analysis of γ-hydroxybutyric acid (GHB) in venous blood using a simple ultra-high-pressure liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) method. GHB was extracted from VAMS device by acetonitrile, after a re-hydration step in a temperature-controlled ultrasonic bath at 60°C for 10 min. Chromatographic analysis was carried out on a Kinetex C₁₈ column using 0.1% formic acid in water and acetonitrile as binary gradient mobile phase (from 5 to 95% of acetonitrile from 1 to 2.5 min) at a flow rate of 0.3 ml/min. The VAMS method was fully validated according to current guidelines with satisfactory results in terms of linearity, selectivity, precision, absolute recovery, matrix effect and stability. The linearity was determined from 0.5 to 200 μg/ml and the lower limit of quantitation was 0.5 μg/ml. The novel VAMS–UHPLC–MS/MS method was successfully compared with plasma-based method in a GHB-treated patient as a proof of concept.