Hydrosilylation of epoxides catalyzed by a cationic η1-silane iridium(III) complex

Cationic silane complex 2, catalyzes the hydrosilylation of epoxides and cyclic ethers to give the silyl-protected alcohols, regioselectively. A mechanistic study shows that the epoxide undergoes isomerization to the ketone, followed by hydrosilylation.     

Properties of η-pentamethylcyclopentadienyl rhodium(III) and iridium(III) complexes with quinolin-8-ol and their cytostatic activity

Reaction of dimers [M(η⁵-C₅Me₅)Cl₂]₂ (M-Rh, Ir) with quinolin-8-ol in molar ratio 1:2 leads to formation of monomer complexes [Rh(η⁵-C₅Me₅)Cl(qol)] (1) and [Ir(η⁵-C₅Me₅)Cl(qol)] (2) (qol = quinolin-8-olate). Compounds 1 and 2 have been characterized with elemental analysis and spectroscopic methods. ¹H NMR spectra revealed that quinolin-8-olate is coordinated via oxygen and nitrogen atoms. The ¹H NMR and ¹³C NMR spectra showed that carbon and hydrogen atoms of pentamethylcyclopentadienyl ligand are equivalent. The structure of rhodium complex has been calculated using DFT B3LYP method. The calculated geometry of complex 1 agrees very well with data found for rhodium complexes containing Cl, C₅Me₅ and qol ligands. Both complexes are active antitumor and antibacterial agents.     

Crystal structure of a μ-oxo-bridged dimeric iron(III) complex

A dimeric [{Fe(5-ClL1)}₂(μ-O)], [H₂-5-ClL1 = N,N′-bis(5-chloro-2-hydroxybenzylidene)-2-methylpropane-1,2-diamine] tetradentate Schiff-base complex, 1, has been synthesized and its crystal structure has been determined by single crystal X-ray diffraction analysis. Structural analysis of complex 1 shows that the complex is a centrosymmetric dimer. Each of the Fe(III) ions has a five-coordinate geometry and one oxygen atom bridges two Fe(III) ions to form a μ-oxo structure. The geometry around iron atom can be described as a square based pyramid with the FeN₂O₂ coordination plane and oxo ligand.     

X-ray structures of trans-dichloro(4-methylpyrimidine) (η1-phenyl)bis(pyridine)rhodium(III) hydrate and trans-dichloro(phenyl)tris(triphenylstibine)rhodium(III) ethylacetate solvate. Molecular orbital analysis of trans-dichloro (4-methylpyrimidine)(η1-phenyl)bis(pyridine)rhodium(III)

The crystal and molecular structure of trans-dichloro(4-methylpyrimidine)(η ¹ -phenyl)cis-bis(pyridine)rhodium(III) water solvate, 1x 0.17H₂ O, and trans-dichloro(η ¹ -phenyl)tris(triphenylstibine)rhodium(III) ethylacetate solvate, 2x CH₃ CO₂ CH₂ CH₃ have been studied via X-ray diffraction from a single crystal at room temperature. The final refinement converged to R1 conventional index of 0.0350 and 0.0361 for the structural analysis of 1x 0.17H₂ O [space group R(-3) and 2x CH₃ CO₂ CH₂ CH₃ P(-1) , respectively. The 4-methylpyrimidine ligand (Pym) is only weakly bound to Rh in 1, as shown by the long Rh-N distance (2.251(4) Å), compared to the Rh N(pyridine) lengths average, 2.066(4) . N-C bond distances involving the N donor average 1.329(6) and 1.345(6) for Pym and pyridine (Py) ligands, respectively. The C N C bond angle on the donor is 114.1(5)° for Pym and average 117.4(4)^° for Py.The structure of the complex molecule of 2x CH₃ CO₂ CH₂ CH₃ has some differences when compared to that of the corresponding acetone solvate previously studied in this laboratory (Cini, R., Giorgi, G. and Pasquini, L., Inor`. Chim. Acta, 1992, 196, 7). The two structures differ mainly by the orientation of the phenyl donor with respect to the Cl-Rh-Cl axis (which is more eclipsed for the ethylacetate solvate) and by the conformation of the SbPh₃ ligands.Density functional calculations at the B3LYP/LANL2DZ level with full geometry optimization were carried out on the free Pym molecule and on some Sc(N ¹ Pym) ^{3 +}and Sc(N ² Pym) ^{3 +} model molecules. The effect of metal coordination consists mainly in enlarging the (Sc)N-C bond distances up to 0.150Å, whereas the C-N(Sc)-C bond angle decreases of 1.9°. Significant changes on other bond lengths and angles relevant to ring atoms of Pym occur upon metal coordination to the nitrogen atom. The metal coordination to N(2) is less favorable than to N(1) of 7.5 kcal for 1:1 species of Sc^{3 +}Extended Hückel calculations showed that HOMO consists mostly of metal-d orbitals with some character of chloride and phenyl and pyrimidine ligands, whereas LUMO is composed of phenyl, pyridine and pyrimidine orbitals. The method well reproduces the Rh-N and Rh-C bonding distances and gives Rh-C dissociation energy 2.38 and 5.48 times that for the Rh-N(Py) and Rh-N(Pym) bonds, respectively.     

Can a formally zwitterionic rhodium(I) complex emulate the charge density of a cationic rhodium(I) complex? A combined synchrotron X-ray and theoretical charge-density study

The molecular electron densities of structurally related cationic ([(κ(2)-3-P(i)Pr(2)-2-NMe(2)-indene)Rh(COD)](CF(3)SO(3)), [1c](CF(3)SO(3))) and formally zwitterionic ([(κ(2)-3-P(i)Pr(2)-2-NMe(2)-indenide)Rh(COD)], 1z) complexes were accurately determined using synchrotron bright-source X-ray radiation at 30 K followed by multipolar refinement (COD = η(4)-1,5-cyclooctadiene). The densities were also obtained from density functional theory calculations with a large, locally dense basis set. A 28-electron ([Ar]3d(10)) core of the Rh atom was modeled by an effective core potential to obtain a density that was then augmented with relativistic cores according to the Keith-Frisch approximation. Calculations were performed at the experimental geometry and after vacuum-phase geometry optimization starting from the experimental geometry. Experimental and calculated geometries and electron-density distributions show that the electron density and electronic structure in the region of the Rh center are not significantly altered by protonation of the aromatic ring and that formal removal of CF(3)SO(3)H from [1c](CF(3)SO(3)) affords a complex 1z possessing substantial zwitterionic character (with a charge separation of ca. 0.9 electronic charge) featuring a negatively charged aromatic indenide framework. Further, the molecular electrostatic potentials of 1c and 1z exhibit similar topography around the metal, despite being drastically different in the vicinity of the indene or indenide portion of the cation (1c) and zwitterion (1z), respectively. Collectively, these observations obtained from high-level experimental and theoretical electron-density analysis confirm, for the first time, that appropriately designed zwitterionic complexes can effectively emulate the charge distribution found within ubiquitous cationic platinum-group metal catalyst complexes, in keeping with recent catalytic investigations.     

Synthesis of 2-picolyl functionalized η-cyclopentadienyl derivatives of rhodium(I) and iridium(I) and preliminary study of their reaction with ruthenium(II) for assembling hetero-bimetallic complexes

The 2-picolylcyclopentadienyl derivatives of rhodium(I) and iridium(I) of formula [M{η⁵-C₅H₄(2-CH₂C₅H₄N)}(η⁴-C₈H₁₂)] (3) (M = Rh) and (4) (M = Ir) are obtained in good yields by reacting 2-picolylcyclopentadienyllithium (7) with [RhCl(η⁴-C₈H₁₂)]₂ and [IrCl(η⁴-C₈H₁₂)]₂, respectively. The corresponding dicarbonyl derivatives, [M{η⁵-C₅H₄(2-CH₂C₅H₄N)}(CO)₂] (5) (M = Rh) and 6 (M = Ir), are obtained in good yields by reacting 2-picolylcyclopentadienylthallium(I) (8) with [RhCl(CO)₂]₂ and [IrCl(C₅H₅N)(CO)₂], respectively. 5 has already been reported in the literature. The new complexes were characterized by elemental analysis, mass spectrometry, ¹H NMR, FT-IR, and UV-Vis (210-330 nm) spectroscopy. The UV-Vis spectra indicate the existence of some electronic interaction between the 2-picolinic chromophore and the cyclopentadienyl-metal moiety. The study of the electrochemical behaviour of 3-6 by cyclic voltammetry (CV) allows the interpretation of the electrode processes and gives information about the location of the redox sites. Moreover, various synthetic strategies were tested in order to try to coordinate the complexes 3-6 to a ruthenium(II) centre, but most of them failed. Instead, the hetero-bimetallic complex bis(2,2′-bipyridine)[(η⁵-2-picolylcyclopentadienyl)(η⁴-cycloocta-1,5-diene)rhodium(I)]chlororuthenium(II)-(hexafluorophosphate) (13), was obtained, although in poor yields (10%), by reacting the nitrosyl complex [RuCl(bipy)₂(NO)][PF₆]₂14 (bipy = 2,2′-bipyridine) first with potassium azide and then with the rhodium(I) complex 3. The analogous complex bis(2,2′-bipyridine)(2-picoline)chlororuthenium(II)-(hexafluorophosphate) (15), that carries a ruthenium-bonded 2-picoline molecule instead of 3, has prepared in the same way. 13 and 15 were characterized by elemental analysis, mass spectrometry, and ¹H NMR.     

The DFT study on Rh–C bond dissociation enthalpies of (iminoacyl)rhodium(III)hydride and (iminoacyl)rhodium(III)alkyl

Rhodium transition-metal-organic cooperative catalysis, which has been intensively studied by many chemists, represents a great success in C–H bond activation because of high efficiencies and selectivities. Typically, in the reaction mechanism of aldehyde and alkene catalyzed by Rh(I) complex and 2-amino-3-picoline, two kinds of metala-cyclic transition-metal complexes of (iminoacyl)rhodium(III)hydride and (iminoacyl)rhodium(III) alkyl are generally formed. The two complexes play an important role in the overall reaction, in which the Rh–C bond formations are involved. So it is meaningful to understand the strength of Rh–C bond, which can be measured by the homolytic bond dissociation enthalpies (BDEs). To this end, we first calculated 16 relative Rh–C BDEs of Tp′Rh(CNneopentyl)RH (Tp′?=?hydridotris-(3,5-dimethylpyrazolyl)borate) by 19 density functional theory (DFT) methods. Furthermore, the 5 absolute Rh–C BDEs of Rh transition-metal complexes were also calculated. The results show that the B97D3 is the most accurate method to predict the relative and absolute Rh–C BDEs and the corresponding RMSE values are the smallest of 2.8 and 3.3?kcal/mol respectively. Therefore, the Rh–C BDEs of (iminoacyl)rhodium(III)hydride and (iminoacyl)rhodium(III)alkyl as well as the substituent effects were investigated by using the B97D3 method. The results indicated that the different substituents exhibit different effects on different types of Rh–C BDEs. In addition, the analysis including the natural bond orbital (NBO) as well as the energies of frontier orbitals were performed in order to further understand the essence of the Rh–C BDE change patterns.     

Carbonyl ylide formation from the rhodium (II) acetate catalyzed reaction of a α-diazoketone

Reaction of the α-diazoketone derived from 7-carboxyphthalide with rhodium acetate results in an internal cyclization to give a six-ring carbonyl ylide which is subsequently converted to 7-carbomethoxyphthalide.     

A Pd(II) complex of a β-cyclodextrin-based polydentate ligand: an efficient catalyst for the Suzuki reaction in aqueous media

Molecular assembly has become a promising strategy for designing new polydentate ligands. But very often such ligands and their complexes are sparingly soluble in aqueous phase due to their intrinsic hydrophobic character. Pd(II) complexes are good homogeneous catalysts but their poor solubility in aqueous phase may limit their catalytic efficacy in the universal green solvent water. However, solubility related challenges especially in aqueous phase can be mitigated through the formation of inclusion complexes by exploiting the hydrophobic nature of the β-cyclodextrin (β-CD) cavity. Hence, an ionic liquid ChCD (1) was synthesized from β-CD and Choline bromide (ChBr). Next a supramolecular N, N^′, O-tridentate ligand 1?2 (3) was synthesized by the inclusion of 2,6-diaminopyridine (2) in the hydrophobic β-CD cavity of the ionic liquid ChCD (1) and was well characterized by elemental analysis, UV-visible, FTIR, ¹H NMR spectroscopy, etc. The stoichiometry of the inclusion complex 1?2 (3) was found to be 1:1 based on UV-visible spectrophotometric study. A new air stable, highly water soluble Pd²⁺-complex [κ³-N, N^′, O-Pd(1?2)H₂O]OAc (4) was then synthesized from the supramolecular ligand (3) with 1:1 stoichiometry and used as a catalyst for Suzuki cross-coupling reactions in water at ambient temperature with good to excellent yields. The catalyst can be removed and recycled. Additionally, the use of non-toxic solvent water makes the methodology green, sustainable, and economically viable.     

Mössbauer spectroscopic study of an iron(III) complex with crown porphyrin

A complex of ⁵⁷Fe with 5-{4-[((4′-hydroxybenzo-15-crown-5)-5′-yl)diazo]phenyl}-10,15,20-triphenylporphyrin was studied by Mössbauer spectroscopy. The presence of signals of two types in the spectra (a doublet and an extended absorption band over a wide velocity range) suggests that the Fe atoms occupy two structurally different positions in this complex. The dependences of the doublet asymmetry on temperature and the angle between the normal to the sample plane and the γ-ray beam were studied. The isomer shift δ of the doublet in the temperature range from 360 to 5 K changes from 0.25 to 0.41 mm/s, while the quadrupole splitting remains virtually unchanged (Δ ≈ 0.65 mm/s). The relaxation-type absorption over a wide velocity range, the relative area of which strongly varies with temperature, can be described by a broad singlet with the following parameters: δ = 0.30–0.44 mm/s and Γ = 2.8–3.38 mm/s. According to the δ values, both signals are due to Fe(III) derivatives.     

Syntheses and characterization of η 5-pentamethylcyclopentadienyl rhodium(III) and iridium(III) complexes containing polypyridyls

Reaction of [(η ⁵-C₅Me₅)M(μ-Cl)Cl]₂ {M?=?Rh (1), Ir (2)} and [(η ⁵-C₅Me₅)MCl₂(DBT)] (DBT?=?dibenzothiophene) {M?=?Rh (3), Ir (4)} with polypyridyl ligands 2,3-bis(2-pyridyl)pyrazine (bpp), 2,3-bis(2-pyridyl)quinoxaline (bpq), 1,3,5-tris(2-pyridyl)-2,4,6-triazine (tptz), 2,3,5,6-tetrakis(2-pyridyl)pyrazine (tppz) and 4′-pyridyl-2,2′:6′,2′′-terpyridine (py-terpy) results in the formation of mononuclear cationic complexes, [(η ⁵-C₅Me₅)MCl(poly-py)]⁺ (poly-py?=?polypyridyl ligand). The complexes were isolated as hexafluorophosphate salts and characterized by IR and NMR spectroscopy.     

Cascade reaction including a formal [5 + 2] cycloaddition by use of alkyne-Co2(CO)6 complex

A new cascade reaction including formal [5?+?2] cycloaddition was developed. Treatment of homocinnamyl alcohol and Co₂(CO)₆-complexed arylpropynal with BF₃·OEt₂ resulted in the generation of hydrobenzocycloheptafuran having an alkyne-Co₂(CO)₆ complex. The reaction consists of 5-membered ring selective Prins cyclization and subsequent Friedel-Crafts cyclization. The cascade reaction was applied to a further multi-step cascade cyclization, which resulted in the formation of more complex polycyclic hydrofurans.     

Formation, structure, and reactivities of 1:1 adducts between quadricyclane and (η-cyclopentadienyl)(1,2-diphenyl- or -dimethoxycarbonyl-1,2-ethenedithiolato)rhodium(III)

The rhodiadithiolene complexes [Rh(Cp)(S₂C₂Z₂)] (Z=Ph (1a) and COOMe (1b)) reacted with quadricyclane (Q) to give 1:1 adducts [Rh(Cp)(S₂C₂Z₂) (C₇H₈)] (Z=Ph (2a) and COOMe (2b)) in which Rh and S of the complexes are bridged by C(7) (bridge carbons) and C(5) (edge carbons) of norbornene (C₇H₈), respectively. The structure of the adduct 2a was re-investigated and determined by X-ray structural analysis. The rhodiadithiolene complexes and those adducts showed the catalytic activities for the thermal isomerization from Q to norbornadiene (NBD). Adduct 2a photochemically dissociated to give the original complex 1a and NBD upon irradiation with a high-pressure mercury lamp. Skeletal rearrangements of the hydrocarbon moiety were confirmed in the formation of these adducts and in their photo-dissociation, according to deuterium labeling experiments.     

Asymmetric homogeneous hydrogenation of α-acylaminocinnamic acids and esters catalyzed by a rhodium (I) complex of dioxop

α-Acylaminocinnamic acids and esters are hydrogenated with rhodium (I) complex containing (2R, 4R)-cis-bis(diphenylphosphinomethyl)-1,3-dioxolan. The Z acids give enantiomeric excess up to 79% in the presence of triethylamine; increasing the steric bulk of the enamide moiety has only a small effect on the enantiomeric excess. The esters are reduced with low optical yield.     

Kinetics of oxidation of phenylhydrazine by a μ-oxo diiron(III,III) complex in acidic aqueous media

Phenylhydrazine (R) quantitatively reduces [Fe₂(μ-O)(phen)₄(H₂O)₂]⁴⁺ (1) (phen?=?1,10-phenanthroline) and its conjugate base [Fe₂(μ-O)(phen)₄(H₂O)(OH)]³⁺ (2) to [Fe(phen)₃]²⁺ in presence of excess 1,10-phenanthroline in the pH range 4.12–5.55. Oxidation products of phenylhydrazine are dinitrogen and phenol. The reaction proceeds through two parallel paths: 1?+?R?→?products (k ₁), 2?+?R?→?products (k ₂); neither RH⁺ nor the doubly deprotonated conjugate base of the oxidant, [Fe₂(μ-O)(phen)₄(OH)₂]²⁺ (3) is kinetically reactive though both are present in the reaction media. At 25.0°C, I?=?1.0?M (NaNO₃), the rate constants are k ₁?=?425?±?10?M^?1?s^?1 and k ₂?=?103?±?5?M^?1?s^?1. An inner-sphere, one-electron, rate-limiting step is proposed.     

Isolation of a PBP-pincer rhodium complex stabilized by an intermolecular C-H σ coordination as the fourth ligand

A little help from my friends: a highly reactive, 16-electron square-planar rhodium complex was isolated. This species displays an intermolecular interaction between the rhodium and the C-H bond of another molecule as the fourth ligand to form an infinite network in the crystal lattice. The complex undergoes oxidative addition to the O-H bond of phenol or a primary alkyl alcohol to give the corresponding hydrido-phenoxido Rh(III) complex or carbonyl Rh(I) complex, respectively.     

Synthesis and properties of a functionalized heterobimetallic Re(I)–Gd(III) complex as a potential dual-contrast agent for molecular imaging

In the design of dual-imaging probes, the first functionalized and neutral heterobimetallic Re(I)–Gd(III) complex, highly soluble in aqueous solutions, has been prepared. This system exhibits interesting photophysical properties (λ_em = 578 nm, ? = 1.4%) for optical imaging and substantial higher relaxivity (r₁ = 6.6 mM⁻¹ s⁻¹ at 0.47 T and 37 °C) than the clinically used MRI contrast agents. Moreover, this system incorporates an aromatic ester functionality suitable for bioconjugation.     

Crystal structure of a cyanide-bridged heptanuclear manganese(III)–chromium(III) complex with a ground state S = 21/2

K₃[Cr(CN)₆] reacts with the mononuclear Mn^III complex Mn(salen)ClO₄ · 2H₂O [salen: N,N-ethylenebis(salicylideneiminato)dianion] to give a bimetallic heptanuclear complex cation salt [Cr{(CN)Mn(salen · H₂O)}₆][Cr(CN)₆]6H₂O. In the complex anion, [Cr{(CN)Mn(salen · H₂O)}₆]³⁺, six Mn^III ions coordinate to a Cr^III center via cyano bridges, forming a spherical species with 3 symmetry. A study of magnetic properties shows the presence of antiferromagnetic interaction through the cyanide bridge between Cr^III (S = 3/2) and Mn^III (S = 4/2) and results in a ground state S = 21/2.     

Characterization of a high-spin non-heme Fe(III)-OOH intermediate and its quantitative conversion to an Fe(IV)═O complex

We have generated a high-spin Fe(III)-OOH complex supported by tetramethylcyclam via protonation of its conjugate base and characterized it in detail using various spectroscopic methods. This Fe(III)-OOH species can be converted quantitatively to an Fe(IV)═O complex via O-O bond cleavage; this is the first example of such a conversion. This conversion is promoted by two factors: the strong Fe(III)-OOH bond, which inhibits Fe-O bond lysis, and the addition of protons, which facilitates O-O bond cleavage. This example provides a synthetic precedent for how O-O bond cleavage of high-spin Fe(III)-peroxo intermediates of non-heme iron enzymes may be promoted.